Search NASA⌕ Search

SEARCH · Search NASA

Results for “scattering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Application of a new composite cubic-boron nitride gasket assembly for high pressure inelastic x-ray scattering studies of carbon related materials

We have developed a new composite cubic-boron nitride (c-BN) gasket assembly for high pressure diamond anvil cell studies, and applied it to inelastic x-ray scattering (IXS) studies of carbon related materials in order to maintain a larger sample thickness and avoid the interference from the diamond anvils. The gap size between the two diamond anvils remained {approx}80 {micro}m at 48.0 GPa with this new composite c-BN gasket assembly. The sample can be located at the center of the gap, {approx}20 {micro}m away from the surface of both diamond anvils, which provides ample distance to separate the sample signal from the diamond anvils. The high pressure IXS of a solvated C{sub 60} sample was studied up to 48 GPa, and a pressure induced bonding transition from sp{sup 2} to sp{sup 3} was observed at 27 GPa.

36 MATERIALS SCIENCE↗

Exploring Pore Formation of Atomic Layer-Deposited Overlayers by in Situ Small- and Wide-Angle X-ray Scattering

In this work, we explore the pore structure of overcoated materials by in situ synchrotron small- and wide-angle X-ray scattering (SAXS)/(WAXS). Thin films of aluminum oxide (Al2O3) and titanium dioxide (TiO2) with thicknesses of 4.9 and 2.5 nm, respectively, are prepared by atomic layer deposition (ALD) on non-porous nanoparticles. In situ X-ray measurements reveal that porosity is induced in the ALD films by annealing the samples at high temperature. Moreover, this pore formation can be attributed to densification resulting from an amorphous to crystalline phase transition of the ALD films as confirmed by high resolution X-ray diffraction (XRD) and pair distribution function (PDF). Simultaneous SAXS/WAXS results not only show that the porosity is formed by this phase transition but also that the pore size increases with temperature.

Li, Tao↗

On the absence of a positive sound dispersion in the THz dynamics of glycerol: an inelastic x-ray scattering study

The high frequency transport properties of glycerol are derived from inelastic x-ray scattering spectra measured at different pressures and compared with ultrasound absorption data. As a result, the presence of two distinct relaxation processes is inferred: a slow one, occurring in the GHz window and having an essentially structural character, and a fast one, related instead to microscopic degrees of freedom. While the former originates a neat increase of the apparent, i.e. frequency-dependent, sound velocity, the latter induces no visible dispersive effects on the acoustic propagation. The observed behavior is likely paradigmatic of all glass formers near or below the melting and it is here discussed and explained in some detail.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Molecular structure determination from x-ray scattering patterns of laser-aligned symmetric-top molecules.

We investigate the molecular structure information contained in the x-ray diffraction patterns of an ensemble of rigid CF{sub 3}Br molecules aligned by an intense laser pulse at finite rotational temperature. The diffraction patterns are calculated at an x-ray photon energy of 20 keV to probe molecular structure at angstrom-scale resolution. We find that a structural reconstruction algorithm based on iterative phase retrieval fails to extract a reliable structure. However, the high atomic number of Br compared with C or F allows each diffraction pattern to be treated as a hologram. Using this approach, the azimuthal projection of the molecular electron density about the alignment axis may be retrieved.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Rough surface scattering from moving ocean surfaces as an indicator of scattering mechanisms

Ever since Crombie used the Doppler spectrum of RF signals scattered from the ocean surface to provide conclusive evidence for Bragg resonant scattering, scattering from the ocean surface has served as a testing ground for the identification of governing scattering mechanisms in rough surface scattering. The moving ocean surface has the advantage for rough surface scattering that, being a dispersive medium, features with different spatial scales the tendency to travel at different speeds. Thus, by looking at the temporal signature of the scattered field, one can try to isolate the scattering mechanism. This feature has been exploited by various authors. To give a recent example, we cite the work of Plant, who examined the Doppler spectrum of the return signal to infer the presence of two-scale scattering in scattering at medium incidence angles. The problem with restricting oneself to the examination of the Doppler spectrum, as has been done traditionally, is that one restricts the phenomena under investigation to temporally homogeneous phenomena: transient phenomena, which are localized in time, are not localized in frequency space. There is increasing evidence that this type of phenomena, due to specular scattering or breaking waves, may also play an important role in determining the scattering mechanism in ocean-like surfaces. To overcome this problem, we introduce the use of the Wavelet Transform to study the frequency-temporal signatures of the scattered field from moving ocean waves. We calculate this signature using various analytic scattering theories and show that the Wavelet Transform provides a useful tool for separating the different scattering mechanisms operating in scattering in ocean-like surfaces. Next we simulate realistic nonlinear moving ocean waves and calculate the temporal scattered field signature by using the method of moments and the stop-start approximation: the surface is assumed stationary during a scattering event, but moves between incident EM pulses. We compute and compare the Doppler frequency spectrum and the Wavelet Transform of the resulting signal for various types of surfaces and show how different scattering mechanisms may be isolated by this technique. Finally, we compare these numerical results against the analytical predictions in order to obtain the domain of applicability of various scattering theories for moving ocean surfaces which may include wave breaking and specular glints.

Rodriguez, Ernesto↗

A general framework and review of scatter correction methods in x-ray cone-beam computerized tomography. Part 1: Scatter compensation approaches

Since scattered radiation in cone-beam volume CT implies severe degradation of CT images by quantification errors, artifacts, and noise increase, scatter suppression is one of the main issues related to image quality in CBCT imaging. The aim of this review is to structurize the variety of scatter suppression methods, to analyze the common structure, and to develop a general framework for scatter correction procedures. In general, scatter suppression combines hardware techniques of scatter rejection and software methods of scatter correction. The authors emphasize that scatter correction procedures consist of the main components scatter estimation (by measurement or mathematical modeling) and scatter compensation (deterministic or statistical methods). The framework comprises most scatter correction approaches and its validity also goes beyond transmission CT. Before the advent of cone-beam CT, a lot of papers on scatter correction approaches in x-ray radiography, mammography, emission tomography, and in Megavolt CT had been published. The opportunity to avail from research in those other fields of medical imaging has not yet been sufficiently exploited. Therefore additional references are included when ever it seems pertinent. Scatter estimation and scatter compensation are typically intertwined in iterative procedures. It makes sense to recognize iterative approaches in the light of the concept of self-consistency. The importance of incorporating scatter compensation approaches into a statistical framework for noise minimization has to be underscored. Signal and noise propagation analysis is presented. A main result is the preservation of differential-signal-to-noise-ratio (dSNR) in CT projection data by ideal scatter correction. The objective of scatter compensation methods is the restoration of quantitative accuracy and a balance between low-contrast restoration and noise reduction. In a synopsis section, the different deterministic and statistical methods are discussed with respect to their properties and applications. The current paper is focused on scatter compensation algorithms. The multitude of scatter estimation models will be dealt with in a separate paper.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

A new approach to quantification of metamorphism using ultra-small and small angle neutron scattering.

In this paper we report the results of a study using small angle and ultra-small angle neutron scattering techniques (SANS and USANS) to examine the evolution of carbonates during contact metamorphism. Data were obtained from samples collected along two transects in the metamorphosed Hueco limestone at the Marble Canyon, Texas, contact aureole. These samples were collected from the igneous contact out to {approx}1700 m. Scattering curves obtained from these samples show mass fractal behavior at low scattering vectors, and surface fractal behavior at high scattering vectors. Significant changes are observed in the surface and mass fractal dimensions as well as the correlation lengths (pore and grain sizes), surface area to volume ratio and surface Gibbs Free energy as a function of distance, including regions of the aureole outside the range of classic metamorphic petrology. A change from mass-fractal to non-fractal behavior is observed at larger scales near the outer boundary of the aureole that implies significant reorganization of pore distributions early in the metamorphic history. Surface fractal results suggest significant smoothing of grain boundaries, coupled with changes in pore sizes. A section of the scattering curve with a slope less than -4 appears at low-Q in metamorphosed samples, which is not present in unmetamorphosed samples. A strong spike in the surface area to volume ratio is observed in rocks near the mapped metamorphic limit, which is associated with reaction of small amounts of organic material to graphite. It may also represent an increase in pore volume or permeability, suggesting that a high permeability zone forms at the boundary of the aureole and moves outwards as metamorphism progresses. Neutron scattering data also correlate well with transmission electron microscopic (TEM) observations, which show formation of micro- and nanopores and microfractures during metamorphism. The scattering data are, however, quantifiable for a bulk rock in a manner that is difficult to achieve using high-resolution imaging (e.g. TEM). Thus, neutron scattering techniques provide a new approach to the analysis and study of metamorphism.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Resonant surface enhancement of Raman scattering of Ag nanoparticles on silicon substrates fabricated by dc sputtering

Ag nanoparticles (AgNPs) were deposited onto silicon substrates by direct current (dc) magnetron sputtering. The influences of sputtering power and sputtering time on the AgNP film morphology were studied using atomic force microscopy. The particle size was successfully tuned from 19 nm to 53 nm by varying the sputtering time at a dc power of 10 W. When Rhodamine 6 G (R6G) was used as the probe molecule, the AgNP films showed significant surface enhanced Raman scattering effect. In particular, it is found that larger particles show stronger enhancement for lower concentrations of R6G while smaller particles display stronger enhancement for higher concentrations of R6G.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗