Search NASA⌕ Search

SEARCH · Search NASA

Results for “selenium doping”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Epitaxial growth of TiSe 2 /TiO 2 heterostructure

We report that TiSe 2 thin films can be epitaxially grown on TiO 2 substrates despite different lattice symmetry between the two materials. The TiSe 2 thin films can be prepared on TiO 2 via molecular beam epitaxy (MBE) in two ways: by conventional co-deposition using selenium and titanium sources, and by evaporating just selenium on reconstructed surfaces of TiO 2 . Both growth methods yield crystalline thin films with similar electronic band structures. TiSe 2 films on TiO 2 substrates exhibit large electron doping and a lack of charge density wave (CDW) order, which is different from both bulk single crystal TiSe 2 and TiSe 2 thin films on graphene. These phenomena can be explained by selenium vacancies in the TiSe 2 films, which naturally occur when these films are grown on TiO 2 substrates. Our successful growth of transition metal dichalcogenide (TMDC) films on a transition metal oxide (TMO) substrate provides a platform to further tune the electrical and optical properties of TMDC thin films.

36 MATERIALS SCIENCE↗

Superconducting properties of single crystalline FeTe{sub 1-x}Se{sub x} (x = 0, 0.15, 0.25, 0.35, 0.40 and 0.50)

In this paper we have grown single crystalline samples of Se-doped FeTe compound using self-flux technique and studied the structural and electrical transport properties of the as-grown crystals. The samples have been grown with compositions FeTe{sub 1-x}Se{sub x} (x = 0, 0.15, 0.25, 0.35, 0.40 and 0.50). The as-grown samples are then investigated for their structural and superconducting properties by means of X-ray diffraction and physical property measurements. The XRD results of powdered samples reveal a single (tetragonal) phase with space group symmetry P4/nmm for all the samples. The lattice parameters are observed to reduce with increase of Se-doping at Te-site. Highest H{sub c2}(0) (∼180 T) value has been observed for FeTe{sub 0.5}Se{sub 0.5} sample.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A transparent ultraviolet triggered amorphous selenium p-n junction

This paper will introduce a semitransparent amorphous selenium (a-Se) film exhibiting photovoltaic effects under ultraviolet light created through a simple and inexpensive method. We found that chlorine can be doped into a-Se through electrolysis of saturated salt water, and converts the weak p-type material into an n-type material. Furthermore, we found that a p-n diode fabricated through this process has shown an open circuit voltage of 0.35 V toward ultraviolet illumination. Our results suggest the possibility of doping control depending on the electric current during electrolysis and the possibility of developing a simple doping method for amorphous photoconductors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Observation of an electron band above the Fermi level in FeTe{sub 0.55}Se{sub 0.45} from in-situ surface doping

We used in-situ potassium (K) evaporation to dope the surface of the iron-based superconductor FeTe{sub 0.55}Se{sub 0.45}. The systematic study of the bands near the Fermi level confirms that electrons are doped into the system, allowing us to tune the Fermi level of this material and to access otherwise unoccupied electronic states. In particular, we observe an electron band located above the Fermi level before doping that shares similarities with a small three-dimensional pocket observed in the cousin, heavily electron-doped KFe{sub 2−x}Se{sub 2} compound.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Calculation of the Thermodynamic Voltage Limit of CdSeTe Solar Cells

The first step to understand the origin of losses in any photovoltaic solar cell is to determine the fundamental thermodynamic efficiency and voltage limits of such a device. In this contribution, we detail techniques to calculate the voltage limit in the case of cadmium selenium telluride (CdSeTe) solar cells, and how approaches based on bandgap alone—i.e., the Shockley-Queisser approach with step-function absorptance—can overestimate the thermodynamic open-circuit voltage limit Voc,ideal . This is particularly true for arsenic-doped samples, which tend to exhibit below-bandgap absorptance.

absorptance↗

Development of arsenic doped Cd(Se,Te) absorbers by MOCVD for thin film solar cells

Recent developments in CdTe solar cell technology have included the incorporation of ternary alloy Cd(Se,Te) in the devices. CdTe absorber band gap grading due to Se alloying contributes to current density enhancement and can result in device performance improvement. Here we report Cd(Se,Te) polycrystalline thin films grown by a chamberless inline atmospheric pressure metal organic chemical vapour deposition technique, with subsequent incorporation in CdTe solar cells. The compositional dependence of the crystal structure and optical properties of Cd(Se,Te) are examined. Selenium graded Cd(Se,Te)/CdTe absorber structure in devices are demonstrated using either a single CdSe layer or CdSe/Cd(Se,Te) bilayer (with or without As doping in the Cd(Se,Te) layer). Cross-sectional TEM/EDS, photoluminescence spectra and secondary ion mass spectroscopy analysis confirmed the formation of a graded Se profile toward the back contact with a diffusion length of ~1.5 um and revealed back-diffusion of Group V (As) dopants from the CdTe layer into Cd(Se,Te) grains. Due to the strong Se/Te interdiffusion, CdSe in the Se bilayer configuration was unable to form an n-type emitter layer in processed devices. In situ As doping of the Cd(Se,Te) layer benefited the device junction quality with current density reaching 28.3 mA/cm 2 . The results provide useful insights for the optimisation of Cd(Se,Te)/CdTe solar cells.

14 SOLAR ENERGY↗

Intrinsic ultrathin topological insulators grown via molecular beam epitaxy characterized by in-situ angle resolved photoemission spectroscopy

We demonstrate the capability of growing high quality ultrathin (10 or fewer quintuple layers) films of the topological insulators Bi{sub 2}Se{sub 3} and Bi{sub 2}Te{sub 3} using molecular beam epitaxy. Unlike previous growth techniques, which often pin the Fermi energy in the conduction band for ultrathin samples, our samples remain intrinsic bulk insulators. We characterize these films using in-situ angle resolved photoemission spectroscopy, which is a direct probe of bandstructure, and ex-situ atomic force microscopy. We find that the conduction band lies above the Fermi energy, indicating bulk insulating behavior with only the surface states crossing the Fermi energy. The use of a thermal cracker allows for more stoichiometric flux rates during growth, while still creating intrinsically doped films, paving the way for future improvements in growth of topological insulators.

36 MATERIALS SCIENCE↗

Optical properties of ion-doped ZnO(Se) layers in the context of band anticrossing theory

The study of the optical properties of ZnO(Se) is a continuation of previous studies of ZnS(O), ZnSe(O), and CdS(O) systems in the context of band anticrossing theory. Selenium ions are implanted into high-purity zinc oxide crystals to a concentration of 10{sup 20} cm{sup –3}. The microcathodoluminescence spectra recorded with a scanning electron microscope at a temperature of 100 K provide information from the bulk of the implanted layer. The origin of the orange-red luminescence of ZnO(Se)–Zn layers is clarified. Orangered luminescence is thought to be a result of the formation of a highly mismatched alloy system, in which ZnSe(O) is formed during implantation and radiation annealing. Data suggesting that the green luminescence of pure self-activated ZnO–Zn is the self-activated (SA) emission studied in detail for other II–VI compounds (ZnS(O), ZnSe(O)) and defined by intrinsic defect complexes (A centers) are reported.

36 MATERIALS SCIENCE↗

Nanoheterostructures with CdTe/ZnMgSeTe Quantum Dots for Single-Photon Emitters Grown by Molecular Beam Epitaxy

Data on the molecular beam epitaxy (MBE) technology, design, and luminescent properties of heterostructures with CdTe/Zn(Mg)(Se)Te quantum dots on InAs(001) substrates are presented. X-ray diffraction has been used to study short-period ZnTe/MgTe/MgSe superlattices used as wide-bandgap barriers in structures with CdTe/ZnTe quantum dots for the effective confinement of holes. It is shown that the design of these superlattices must take into account the replacement of Te atoms by selenium on MgSe/ZnTe and MgTe/MgSe heterointerfaces. Heterostructures with CdTe/Zn(Mg)(Se)Te quantum dots exhibit photoluminescence at temperatures up to 300 K. The spectra of microphotoluminescence at T = 10 K display a set of emission lines from separate CdTe/ZnTe quantum dots, the surface density of which is estimated at ~10{sup 10} cm{sup −2}.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effect of Hydrostatic Pressure on Eu{sub 3−x}Sr{sub x}Bi{sub 2}S{sub 4−y}Se{sub y}F{sub 4} (x = 1 and 2 and y = 1.5 and 2) Superconductors

We have investigated the effect of pressure on Se-doped Eu{sub 2}SrBi{sub 2}S{sub 4}F{sub 4} and EuSr{sub 2}Bi{sub 2}S{sub 4}F{sub 4} at S sites. We report the electrical resistivity measurements under hydrostatic pressure (P) ~ 3 GPa and ~ 2.5 GPa on Eu{sub 2}SrBi{sub 2}S{sub 4−y}Se{sub y}F{sub 4} [dT{sub c}/dP ~ 1.68 K/GPa (x = 2)] and EuSr{sub 2}Bi{sub 2}S{sub 4−x}Se{sub x}F{sub 4} [dT{sub c}/dP ~ 1.57 K/GPa (x = 1.5) and 1.74 K/GPa (x = 2)] respectively. Pressure-induced superconductivity has been observed in EuSr{sub 2}Bi{sub 2}S{sub 2.5}Se{sub 1.5}F{sub 4} with T{sub c} of 2.42 K at 0.12 GPa and the T{sub c} increases with further application of P up to 3 GPa (dT{sub c}/dP ~ 1.12 K/GPa) and maximum T{sub c} of ~ 8 K is observed for EuSr{sub 2}Bi{sub 2}S{sub 2}Se{sub 2}F{sub 4.} These results corroborate the behavior of this material under high pressure magnetization studies. Further, the metallic nature is observed for EuSr{sub 2}Bi{sub 2}S{sub 2.5}Se{sub 1.5}F{sub 4}, EuSr{sub 2}Bi{sub 2}S{sub 2}Se{sub 2}F{sub 4}, and Eu{sub 2}SrBi{sub 2}S{sub 2}Se{sub 2}F{sub 4} compositions and it is slightly suppressed with the application of pressure. Pressure effect on upper critical field H{sub c2}(0) is estimated from magnetic field–dependent ρ(T) measurements and it is found to be higher for all compositions than parent compound. The field-dependent thermal activation energy (μ{sub 0}/k{sub B}) is calculated from Arrhenius plot using ρ(T) and designates a robust flux pinning potential which might be co-existing with applied magnetic field and pressure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electrical and thermal transport properties of layered Bi{sub 2}YO{sub 4}Cu{sub 2}Se{sub 2}

Bi{sub 2}YO{sub 4}Cu{sub 2}Se{sub 2} possesses a low thermal conductivity and high electrical conductivity at room temperature, which was considered as a potential thermoelectric material. In this work, we have investigated the electrical and thermal transport properties of Bi{sub 2}YO{sub 4}Cu{sub 2}Se{sub 2} system in the temperature range from 300 K to 873 K. We found that the total thermal conductivity decreases from ~1.8 W m{sup −1} K{sup −1} to ~0.9 W m{sup −1} K{sup −1}, and the electrical conductivity decreases from ~850 S/cm to ~163 S/cm in the measured temperature range. To investigate how potential of Bi{sub 2}YO{sub 4}Cu{sub 2}Se{sub 2} system, we prepared the heavily Iodine doped samples to counter-dope intrinsically high carrier concentration and improve the electrical transport properties. Interestingly, the Seebeck coefficient could be enhanced to ~+80 μV/K at 873 K, meanwhile, we found that a low thermal conductivity of ~0.7 W m{sup −1} K{sup −1} could be achieved. The intrinsically low thermal conductivity in this system is related to the low elastic properties, such as Young's modulus of 70–72 GPa, and Grüneisen parameters of 1.55–1.71. The low thermal conductivity makes Bi{sub 2}YO{sub 4}Cu{sub 2}Se{sub 2} system to be a potential thermoelectric material, the ZT value ~0.06 at 873 K was obtained, a higher performance is expected by optimizing electrical transport properties through selecting suitable dopants, modifying band structures or by further reducing thermal conductivity through nanostructuring etc. - Highlights: • The total thermal conductivity decreases from 1.8 to 0.9 Wm{sup –1}K{sup –1} at 300–873K. • The electrical conductivity decreased from 850 to 163 S/cm at 300–873K. • The Seebeck coefficients were enhanced through heavily Iodine doping. • The ZT ~0.06 at 873K suggests that Bi{sub 2}YO{sub 4}Cu{sub 2}Se{sub 2} systems are potential thermoelectrical materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The impact of oxygen incorporation during intrinsic ZnO sputtering on the performance of Cu(In,Ga)Se{sub 2} thin film solar cells

We investigated the impact of incorporating 2% oxygen during intrinsic ZnO sputtering on the efficiency of Cu(In,Ga)Se{sub 2} solar cells. The added oxygen not only reduced the optical absorption loss of the Al-doped ZnO overlaying layer but also improved the electronic properties of the underlying CdS/Cu(In,Ga)Se{sub 2} by increasing carrier density, lowering defect level, and increasing diffusion length, eventually enhancing J{sub SC}, V{sub OC}, and fill factor. It was found that the Na doping concentration was significantly increased around the CdS/Cu(In,Ga)Se{sub 2} junction due to the plasma-activated oxygen. The improved electronic properties are better explained by the increased Na concentration than simply the oxygen-related defect passivation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Phase stability and lattice thermal conductivity reduction in CoSb{sub 3} skutterudites, doped with chalcogen atoms

We report a significant reduction in the lattice thermal conductivity of the CoSb{sub 3} skuttertudites, doped with chalcogen atoms. Te/Se chalcogen atoms doped CoSb{sub 3} skutterudite samples (Te{sub 0.1}Co{sub 4}Sb{sub 12}, Se{sub 0.1}Co{sub 4}Sb{sub 12}, Te{sub 0.05}Se{sub 0.05}Co{sub 4}Sb{sub 12}) are processed by ball milling and spark plasma sintering. X-ray diffraction data combined with energy dispersive X-ray spectra indicate the doping of Te/Se chalcogen atoms in the skutterudite. The temperature dependent X-ray diffraction confirms the stability of the Te/Se doped CoSb{sub 3} skutterudite phase and absence of any secondary phase in the temperature range starting from 300 K to 773 K. The Raman spectroscopy reveals that different chalcogen dopant atoms cause different resonant optical vibrational modes between the dopant atom and the host CoSb{sub 3} skutterudite lattice. These optical vibrational modes do scatter heat carrying acoustic phonons in a different spectral range. It was found that among the Te/Se chalcogen atoms, Te atoms alter the host CoSb{sub 3} skutterudite lattice vibrations to a larger extent than Se atoms, and can potentially scatter more Sb related acoustic phonons. The Debye model of lattice thermal conductivity confirms that the resonant phonon scattering has important contributions to the reduction of lattice thermal conductivity in CoSb{sub 3} skutterudites doped with Te/Se chalcogen atoms. Lattice thermal conductivity ∼ 0.9 W/mK at 773 K is achieved in Te{sub 0.1}Co{sub 4}Sb{sub 12} skutterudites, which is the lowest value reported so far in CoSb{sub 3} skutterudites, doped with single Te chalcogen atom.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High lifetime and mobility CdTe alloys by co-sublimation

The focus of this project was to understand controlled doping of CdTe and CdSe x Te 1-x films using group V element dopants such as nitrogen and arsenic. Using methods such as metal organic precursor injection as well as deposition of absorber with source charge incorporated with desired group V dopant. Using characterization methods such as Secondary Ion Mass Spectroscopy and capacitance vs voltage measurement dopant incorporation and activation was verified. Since our deposition system had CuCl deposition source, this source was permanently removed from the system and vacuum chamber was thoroughly cleaned out. CdSe x Te 1-x grading into CdTe has led to higher device efficiency owing to an improvement in short-circuit current (J SC ) due to its lower band-gap. More device fabrication and characterization was performed in an effort to optimize the lower band-gap CdSe x Te 1-x . This optimization was performed using different co-sublimation method where CdTe and Se were co-sublimated in varying proportion to sweep the band-gap of CdSe x Te 1-x that deposited on the substrate.

14 SOLAR ENERGY↗

Thermoelectric properties of indium doped PbTe{sub 1-y}Se{sub y} alloys

Lead telluride and its alloys are well known for their thermoelectric applications. Here, a systematic study of PbTe{sub 1-y}Se{sub y} alloys doped with indium has been done. The powder X-Ray diffraction combined with Rietveld analysis confirmed the polycrystalline single phase nature of the samples, while microstructural analysis with scanning electron microscope results showed densification of samples and presence of micrometer sized particles. The temperature dependent transport properties showed that in these alloys, indium neither pinned the Fermi level as it does in PbTe, nor acted as a resonant dopant as in SnTe. At high temperatures, bipolar effect was observed which restricted the zT to 0.66 at 800 K for the sample with 30% Se content.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Giant increase of critical current density and vortex pinning in Mn doped K{sub x}Fe{sub 2−y}Se{sub 2} single crystals

We report a comparative study of the critical current density (J{sub c}) and vortex pinning among pure and Mn doped K{sub x}Fe{sub 2−y}Se{sub 2} single crystals. It is found that the J{sub c} values can be greatly improved by Mn doping and post-quenching treatment when comparing to pristine pure sample. In contrast to pure samples, an anomalous second magnetization peak (SMP) effect is observed in both 1% and 2% Mn doped samples at T = 3 K for H∥ab but not for H∥c. Referring to Dew-Hughes and Kramer's model, we performed scaling analyses of the vortex pinning force density vs magnetic field in 1% Mn doped and quenched pristine crystals. The results show that the normal point defects are the dominant pinning sources, which probably originate from the variations of intercalated K atoms. We propose that the large nonsuperconducting K-Mn-Se inclusions may contribute to the partial normal surface pinning and give rise to the anomalous SMP effect for H∥ab in Mn doped crystals. These results may facilitate further understanding of the superconductivity and vortex pinning in intercalated iron-selenides superconductors.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

On the Origin of Enhanced Critical Current Density and Thermal-Activated Flux Flow in K{sub x}Fe{sub 2−y}Se{sub 2} Superconductors: the Effect of Quenching and Mn Doping

A magnetotransport, vortex pinning, and critical current density study of superconducting K{sub 0.8}Fe{sub 2−z}Mn{sub z}Se{sub 2} (z = 0, 0.02) single crystals is reported. The parameters of upper critical field, coherence length, and anisotropic ratio at 0 K are presented. Based on thermally activated flux flow model, the values of pinning potential, U{sub 0}{sup ∥{sub c}}(U{sub 0}{sup ∥{sub a}{sub b}}), at 0.25 T are derived to be as large as 1.3 × 10{sup 4}(1.8 × 10{sup 4}) K for z = 0.02, which shows rather robust and retains still larger than pure ones up to 9 T. Utilizing scanning electron microscope, it is revealed the increased magnitude of magnetic moment in magnetic hysteresis loops correlates well with the crystal morphology variation. The evidence on the inhomogeneous distribution of Mn dopants between the matrix and stripe phase is also shown. Furthermore, the temperature dependence of critical current density is analyzed by different pinning regimes and the model of granular superconductor. It is demonstrated that the Josephson coupling between superconducting grains exists in quenched K{sub 0.8}Fe{sub 2−y}Se{sub 2}. However, for Mn-doped sample, the Mn dopant can induce strong vortex pinning in the form of fine K–Mn–Se inclusions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Defect Engineering of Bi 2 SeO 2 Thermoelectrics

Abstract Bi 2 SeO 2 is a promising n ‐type semiconductor to pair with p ‐type BiCuSeO in a thermoelectric (TE) device. The TE figure of merit zT and, therefore, the device efficiency must be optimized by tuning the carrier concentration. However, electron concentrations in self‐doped n ‐type Bi 2 SeO 2 span several orders of magnitude, even in samples with the same nominal compositions. Such unsystematic variations in the electron concentration have a thermodynamic origin related to the variations in native defect concentrations. In this study, first‐principles calculations are used to show that the selenium vacancy, which is the source of n ‐type conductivity in Bi 2 SeO 2 , varies by 1–2 orders of magnitude depending on the thermodynamic conditions. It is predicted that the electron concentration can be enhanced by synthesizing under more Se‐poor conditions and/or at higher solid‐state reaction temperatures ( T SSR ), which promote the formation of selenium vacancies without introducing extrinsic dopants. The computational predictions are validated through solid‐state synthesis of Bi 2 SeO 2 . More than two orders of magnitude increase are observed in the electron concentration simply by adjusting the synthesis conditions. Additionally, a significant effect of grain boundary scattering on the electron mobility in Bi 2 SeO 2 is revealed, which can also be controlled by adjusting T SSR . By simultaneously optimizing the electron concentration and mobility, a zT of ≈0.2 is achieved at 773 K for self‐doped n ‐type Bi 2 SeO 2 . The study highlights the need for careful control of thermodynamic growth conditions and demonstrates TE performance improvement by varying synthesis parameters according to thermodynamic guidelines.

Novitskii, Andrei [MANA, National Institute for Ma↗