Search NASA⌕ Search

SEARCH · Search NASA

Results for “shock ignition”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

CISME report on experiments with HMX powder, PBX 9501 prills, and heated PBX 9501

The ability to predict post-ignition explosive response is relevant to explosives safety, particularly weapons assembly/disassembly operations that must operate under a sufficiently conservative safety basis to meet risk mitigation criteria for inadvertent nuclear detonation (IND). In particular, hazard determinations hinge on whether the PBX 9501 main charge can ultimately attain detonation from an initial, non-shock, ignition stimulus. The CISME experiment uses a spherical explosive charge, which is thermally ignited in the center using a fiber-delivered infrared laser pulse. This ignition mechanism - i.e. a localized thermal hotspot - is representative of the ignition-causing insults typical in accident scenarios, including low-velocity impact, drop, skid, and punch events. In fiscal year 2018 CISME experiments were conducted with pristine PBX 9501 spheres, confined and unconfined. Sub-detonative, low-violence reactions were observed. Here we report experiments conducted since 2018. The explosive charge was varied: experiments were conducted with room temperature pour-density HMX powder and prills of PBX 9501, and heated, thermally damaged PBX 9501. Experiments were conducted in a confined configuration, with two 4 mm-thick stainless-steel hemispherical shells bolted around the sphere. Detonation, via DDT (deflagration-to-detonation transition) was observed in the 3-inch diameter powdered HMX and the 6-inch diameter heated and thermally-damaged PBX 9501 tests. No transition to DDT was observed in smaller diameters for those configurations, and no DDT was observed for pour-density prills of PBX 9501 of any diameter. The original test series demonstrated that the response of pristine, undamaged PBX 9501 to a central ignition is relatively benign. This new test series shows that increased porosity, lack of polymer binders and thermal damage can greatly increase the violence of the post-ignition response, up to and including detonation. These results bridge the explosive response of PBX 9501 from sub-detonative through detonation as a function of diameter and provide valuable test cases for modeling efforts that strive to capture the DDT threshold. By exploring explosive response in a more representative 3D geometry, we can also benchmark these new results to more plentiful DDT datasets generated from testing in 1D tube confinement (the historical test configuration)–the configuration upon which almost all DDT models were developed.

42 ENGINEERING↗
DOE OSTI2021

Electron acceleration at oblique angles via stimulated Raman scattering at laser irradiance >10 16 W cm –2 μm 2

The generation of hot, directional electrons via laser-driven stimulated Raman scattering (SRS) is a topic of great importance in inertial confinement fusion (ICF) schemes. Little recent research has been dedicated to this process at high laser intensity, in which back, side, and forward scatter simultaneously occur in high energy density plasmas, of relevance to, for example, shock ignition ICF. In this paper, we present an experimental and particle-in-cell (PIC) investigation of hot electron production from SRS in the forward and near-forward directions from a single speckle laser of wavelength λ 0 = 1.053μm, peak laser intensities in the range I 0 = 0.2–1.0×10 17 Wcm –2 and target electron densities between ne = 0.3–1.6% n c , where n c is the plasma critical density. As the intensity and density are increased, the hot electron spectrum changes from a sharp cutoff to an extended spectrum with a slope temperature T = 34 ± 1 keV and maximum measured energy of 350 keV experimentally. Multidimensional PIC simulations indicate that the high energy electrons are primarily generated from SRS-driven electron plasma wave phase fronts with k vectors angled ~50° with respect to the laser axis. These results are consistent with analytical arguments that the spatial gain is maximized at an angle which balances the tendency for the growth rate to be larger for larger scattered light wave angles until the kinetic damping of the plasma wave becomes important. The efficiency of generated high energy electrons drops significantly with a reduction in either laser intensity or target electron density, which is a result of the rapid drop in growth rate of Raman scattering at angles in the forward direction.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1972

Controlled flow assembly

Incorporation of isolation valves in high pressure oxygen supply system prevents occurrence of shock ignition when valves are opened. Specifications of equipment show flow rates, pressure ratings, and service life. Illustration of equipment is provided.

Cohen, A. E.↗
NASA NTRS1986

The efficient calculation of chemically reacting flow

A semi-implicit finite volume formulation is used to study flows with chemical reactions. In this formulation the source terms resulting from the chemical reactions are treated implicitly and the resulting system of partial differential equations is solved using two time-stepping schemes. The first is based on the Runge-Kutta method while the second is based on an Adams predictor-corrector method. Results show that improvements in computational efficiency depend to a large extent on the manner in which the source term is treated. Further, analysis and computation indicate that the Runge-Kutta method is more efficient than the Adams methods. Finally, an adaptive time stepping scheme is developed to study problems involving shock ignition. Calculations for a hydrogen-air system agree well with other methods.

Eklund, D. R.↗
NASA NTRSDate not supplied

Liftoff Environments

A Launch Environment, or Liftoff Environment, fundamentally represents a source of loading during the hold-down or liftoff phase of a rocket launch. A launch vehicle is subjected to transient and oscillatory pressure loading on its exterior surfaces induced by engines and boosters during vehicle hold-down and liftoff. These pressure loads are a principal source of structural vibration which may result in the malfunction of vehicle components or the fatigue of exterior skin panels or component brackets. Additionally, the pressure loading gives rise to sound pressure levels inside the crew cabin which may impact the crew's health, safety, or ability to communicate. Liftoff Environments can have a significant impact on the launch vehicle or surrounding structures. For SLS, there are eight primary environments supported by the Liftoff Environments team. These are Liftoff Acoustics (LOA), Hold-down Acoustics (HDA), RS-25 Nozzle Flow Transient (NFT) Acoustics, Booster Ignition Overpressure (IOP) & Duct Overpressure (DOP), Igniter Shock, Core Stage Engine (CSE) Overpressure, Excess Hydrogen (H2) Pop, and Infrasonic Acoustics. These can be split generally into acoustics, which are sustained stationary events, and transients, which are short duration nonstationary events.

Matthew J Casiano↗
NASA NTRS1983

Ignition of SiH4-H2-O2-N2 behind reflected shock waves

The ignition of mixtures of silane, hydrogen, and oxygen diluted with nitrogen was studied in a chemical kinetic shock tube. Ignition delay time measurements were made behind reflected shock waves at pressures of 1.25 atm and 1.35 atm and temperatures ranging from approximately 800 K to 1050 K for two mixtures with silane-oxygen equivalence ratios of 1.0 and 0.5, respectively. Enhancement of the ignition by use of silane was observed experimentally by the failure of a similar mixture containing only hydrogen, oxygen, and nitrogen to ignite during the maximum test time available for these test conditions.

Mclain, A. G.↗
NASA NTRS1977

Ignition of magnesium powders in shock wave induced flows

Ignition of magnesium powders, resulting from an interaction with incident shock wave-induced flows, has been studied. A numerical analysis of particle dynamics and heating is presented and compared with experimental measurements. The induction period is strongly dependent on convective heat transfer and not on chemical reaction rate. Experimentally observed ignition delays were on the order of 100 microns and were inversely dependent on shock strength and initial pressure, directly dependent on particle size and cloud concentration, and independent of oxygen concentration down to 2.3 percent oxygen. Good agreement between experiment and theory was realized.

Fox, T. W.↗
NASA NTRS1985

Ignition of mixtures of SiH sub 4, CH sub 4, O sub 2, and Ar or N sub 2 behind reflected shock waves

Ignition delay times in mixtures of methane, silane, and oxygen diluted with argon and nitrogen were measured behind reflected shock waves generated in the chemical kinetic shock tube at Langley Research Center. The delay times were inferred from the rapid increase in pressure that occurs at ignition, and the ignition of methane was verified from the emission of infrared radiation from carbon dioxide. Pressures of 1.25 atm and temperatures from 1100 K to 1300 K were generated behind the reflected shocks; these levels are representative of those occurring within a supersonic Ramjet combustor. Expressions for the ignition delay time as a function of temperature were obtained from least squares curve fits to the data for overall equivalence ratios of 0.7 and 1.0. The ignition delay times with argon as the diluent were longer than those with nitrogen as the diluent. The infrared wavelength observations at 4.38 microns for carbon dioxide indicated that silane and methane ignited simultaneously (i.e., within the time resolution of the measurement). A combined chemical kinetic mechanism for mixtures of silane, methane, oxygen, and argon or nitrogen was assembled from one mechanism that accurately predicted the ignition of methane and a second mechanism that accurately predicted silane hydrogen ignition. Comparisons between this combined mechanism and experiment indicated that additional reactions, possibly between silyl and methyl fragments, are needed to develop a good silane methane mechanism.

Mclain, A. G.↗
DOE OSTI2024

Validation of implosion modeling through direct-drive shock timing experiments at the National Ignition Facility

Precise modeling of shocks in inertial confinement fusion implosions is critical for obtaining the desired compression in experiments. Shock velocities and post-shock conditions are determined by laser-energy deposition, heat conduction, and equations of state. This paper describes experiments at the National Ignition Facility (NIF) where multiple shocks are launched into a cone-in-shell target made of polystyrene, using laser pulse shapes with two or three pickets and varying on-target intensities. Shocks are diagnosed using the Velocity Interferometric System for Any Reflector diagnostic. Simulated and inferred shock velocities agree well for the range of intensities studied in this work. These results are the first shock-velocity measurements using direct drive on the NIF and provide a good measure of early-time, directly driven laser-energy coupling. Furthermore, the validated models add to the credibility of direct-drive-ignition designs at the megajoule scale.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1980

Shock tube propellant reactions: Ignition of M-9 and catalysis of RDX

The preliminary results of shock tube experiments to study RDX catalysis are presented. It is shown that using N2 as the test gas (P approximately equal to 90 KPa, T bar approximately equal to 650K), the replacement of RDX powder with NaBH4 (20% by weight) leads to a large increase in the amount of RDX reacting and a small decrease in ignition delays T sub i. It is further shown that higher temperatures due to exothermic pyrolysis reactions of NaBH4 are not responsible for these effects. Replacement of N2 by NO2 (10% by volume) in the environment of RDX powders (T bar approximately equal to 650K, P = 90-400 KPa) leads to an increase in T sub i and T sub i is directly proportional to NO2 pressure. Inhibition appears to be initiated by reactions between NO2 and either RDX or the RDX decomposition products.

Cohen, A.↗
NASA NTRS1978

Shock tube and shock wave research; Proceedings of the Eleventh International Symposium, University of Washington, Seattle, Wash., July 11-14, 1977

Papers are presented on the applications of shock-wave technology to the study of hydrodynamics, the use of the pressure-wave machine for charging diesel engines, and measurements of the heat-transfer rate in gas-turbine components. Consideration is given to shock propagation along 90-degree bends, the explosive dissemination of liquids, and rotational and vibrational relaxation behind weak shock waves in water vapor. Shock phenomena associated with expansion flows are described and stratospheric-related research using the shock tube is outlined. Attention is given to shock-wave ignition of magnesium powders, Mach reflection and boundary layers, and transition in the shock-induced unsteady boundary layer on a flat plate. Shock-tube measurements of induction and post-induction rates for low-Btu gas mixtures are presented and shock-initiated ignition in COS-N2O-Ar mixtures is described. Cluster growth rates in supersaturated lead vapor are presented and a study of laser-induced plasma motion in a solenoidal magnetic field is reviewed.

Ahlborn, B.↗
NASA NTRS1972

Auto-ignition of hydrocarbons behind reflected shock waves.

The paper reports on the study of auto-ignition of hydrocarbon-oxygen mixtures behind reflected shock waves. Because of their bearing on the problem of knock in internal combustion engines, n-heptane and iso-octane were chosen as the combustible species. Their stoichiometric mixtures with oxygen had to be diluted with 70% argon to reduce the influence of the boundary layer. Photographic records demonstrated the existence of two different modes of ignition, as has been previously established for the hydrogen-oxygen system. The pressure-temperature limits between these regions of mild and strong ignition were determined. From the same experimental tests, induction time data were obtained over the pressure range of 1-4 atm and the temperature interval of 1200-1700 K.

Vermeer, D. J.↗
DOE OSTI2020

Physics of the implosion up until the time of ignition in a revolver (triple-shell) capsule

Here, a revolver is designed to have two dynamical fuel implosion stages to reach ignition: a shock phase in which the fuel is pre-heated up until the shock collapses at the capsule center, followed by an adiabatic compression phase to ignition. This picture assumes ideal hydrodynamics. Employing the state-of-the-art, hybrid (kinetic-ion/fluid electron), multi-ion Vlasov-Fokker-Planck code, iFP, along with semi-analytic predictions from ideal hydrodynamics in spherical geometry, we confirm this two phase picture—resolving some outstanding questions in Revolver design along the way. Although we find that shock kinetic effects and non-ideality are present in the course of the implosion, these effects do not change the overall dynamics (which is well described by ideal hydrodynamics theory). Additionally, we put the assumption of adiabaticity, for the post-collapse phase, to the test. Finally, we verify the ideal hydro-conjecture that the shock collapse (fuel) convergence is ~2.12 given a single shock, and we confirm that the convergence is about 2.5 in the case of two shocks—in agreement with previous radiation-hydrodynamics simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1983

A Chemical Kinetic Mechanism for the Ignition of Silane/Hydrogen Mixtures

A chemical kinetic reaction mechanism for the oxidation of silane/hydrogen mixtures is presented and discussed. Shock-tube ignition delay time data were used to evaluate and refine the mechanism. Good agreement between experimental results and the results predicted by the mechanism was obtained by adjusting the rate coefficient for the reaction SiH3 + O2 yields SiH2O + OH. The reaction mechanism was used to theoretically investigate the ignition characteristics of silane/hydrogen mixtures. The results revealed that over the entire range of temperature examined (800 K to 1200 K), substantial reduction in ignition delay times is obtained when silane is added to hydrogen.

Jachimowski, C. J.↗
NASA NTRS2010

Ignition-and-Growth Modeling of NASA Standard Detonator and a Linear Shaped Charge

The main objective of this study is to quantitatively investigate the ignition and shock sensitivity of NASA Standard Detonator (NSD) and the shock wave propagation of a linear shaped charge (LSC) after being shocked by NSD flyer plate. This combined explosive train was modeled as a coupled Arbitrary Lagrangian-Eulerian (ALE) model with LS-DYNA hydro code. An ignition-and-growth (I&G) reactive model based on unreacted and reacted Jones-Wilkins-Lee (JWL) equations of state was used to simulate the shock initiation. Various NSD-to-LSC stand-off distances were analyzed to calculate the shock initiation (or failure to initiate) and detonation wave propagation along the shaped charge. Simulation results were verified by experimental data which included VISAR tests for NSD flyer plate velocity measurement and an aluminum target severance test for LSC performance verification. Parameters used for the analysis were obtained from various published data or by using CHEETAH thermo-chemical code.

Oguz, Sirri↗
DOE OSTI2026

Burn mode signatures enabled by high dynamic range fusion reaction history

The evolution of the fusion burn of a compressed inertial confinement fusion (ICF) implosion gives information about the evolution of the temperature, mass, and volume of the hot spot. Currently, the fusion reaction history has been measured with about a decade of dynamic range, giving information about just the peak of the fusion burn. There are proposals for extending the dynamic range to 1000×, measuring the rising edge of the burn earlier in time. Using fusion hot spot theory and a set of ICF simulations, we identify and categorize different stages of fusion burn and what signatures could be measured. For ice layered implosions, the details, conditions, and dynamics of the fusion burn propagation could be observed. For double shell and OMEGA scale implosions, the evolution of the final compression and rebounding shock before ignition could be observed. Higher dynamic range expands investigation into the logarithmic derivative, α, as a signature of various mechanisms.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1984

Systematic optimization of a detailed kinetic model using a methane ignition example

An approach to the systematic optimization of a large-scale dynamic model is proposed which consists in parameterization of simulation results as response surfaces. The optimization procedure is carried out using a second-order orthogonal design. The approach proposed here is demonstrated by an example involving the shock-initiated ignition of methane.

Frenklach, M.↗