Search NASA⌕ Search

SEARCH · Search NASA

Results for “slam”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

Factors that affect reliability of nondestructive detection of flaws in structural ceramics

The factors that affect reliability of nondestructive detection of flaws in structural ceramics by microfocus radiography and scanning laser acoustic microscopy (SLAM) were investigated. Reliability of void detection in silicon nitride and silicon carbide by microfocus X-rays was affected by photon energy level, material chemistry in the immediate vicinity of the void, and the presence of loose powder aggregates inside the void cavity. The sensitivity of SLAM to voids was affected by material microstructure, the level of porosity, and the condition of the specimen surfaces. Statistical results are presented in the form of probability of detection as a function of void diameter for green compacts and sintered materials.

Klima, S. J.↗
NASA NTRS1986

Quantitative void characterization in structural ceramics using scanning laser acoustic microscopy

The ability of scanning laser acoustic microscopy (SLAM) to characterize artificially seeded voids in sintered silicon nitride structural ceramic specimens was investigated. Using trigonometric relationships and Airy's diffraction theory, predictions of internal void depth and size were obtained from acoustic diffraction patterns produced by the voids. Agreement was observed between actual and predicted void depths. However, predicted void diameters were generally much greater than actual diameters. Precise diameter predictions are difficult to obtain due to measurement uncertainty and the limitations of 100 MHz SLAM applied to typical ceramic specimens.

Roth, D. J.↗
NASA NTRS1986

Reliability of scanning laser acoustic microscopy for detecting internal voids in structural ceramics

The reliability of 100 MHz scanning laser acoustic microscopy (SLAM) for detecting internal voids in sintered specimens of silicon nitride and silicon carbide was evaluated. The specimens contained artificially implanted voids and were positioned at depths ranging up to 2 mm below the specimen surface. Detection probability of 0.90 at a 0.95 confidence level was determined as a function of material, void diameter, and void depth. The statistical results presented for void detectability indicate some of the strengths and limitations of SLAM as a nondestructive evaluation technique for structural ceramics.

Roth, D. J.↗
NASA NTRS1987

Nondestructive evaluation of structural ceramics

A review is presented on research and development of techniques for nondestructive evaluation and characterization of advanced ceramics for heat engine applications. Highlighted in this review are Lewis Research Center efforts in microfocus radiography, scanning laser acoustic microscopy (SLAM), scanning acoustic microscopy (SAM), scanning electron acoustic microscopy (SEAM), and photoacoustic microscopy (PAM). The techniques were evaluated by applying them to research samples of green and sintered silicon nitride and silicon carbide in the form of modulus-of-rupture bars containing seeded voids. Probabilities of detection of voids were determined for diameters as small as 20 microns for microfucus radiography, SLAM, and SAM. Strengths and limitations of the techniques for ceramic applications are identified. Application of ultrasonics for characterizing ceramic microstructures is also discussed.

Klima, Stanley J.↗
NASA NTRS1987

Quantitative void characterization in structural ceramics by use of scanning laser acoustic microscopy

The ability of scanning laser acoustic microscopy (SLAM) to characterize artificially seeded voids in sintered silicon nitride structural ceramic specimens was investigated. Using trigonometric relationships and Airy's diffraction theory, predictions of internal void depth and size were obtained from acoustic diffraction patterns produced by the voids. Agreement was observed between actual and predicted void depths. However, predicted void diameters were generally much greater than actual diameters. Precise diameter predictions are difficult to obtain due to measurement uncertainty and the limitations of 100 MHz SLAM applied to typical ceramic specimens.

Roth, D. J.↗
NASA NTRS1988

Flaw characterization in structural ceramics using scanning laser acoustic microscopy

The ability of scanning laser acoustic microscopy (SLAM) to characterize artifically seeded voids in sintered silicon nitride structural ceramic specimens was investigated. The voids ranged from 20 to 430 microns in diameter and were embedded up to 2 mm beneath the surface of the specimens. Probability of detection was determined as a function of void depth and size. Trigonometric relationships and Airy's diffraction theory were used to obtain predictions of void depth and size from acoustic diffraction patterns produced by the voids. Agreement was observed between actual and predicted void depths. However, predicted void diameters were generally much greater than actual diameters. Precise diameter predictions are difficult to obtain because of measurement uncertainty and the limitations of the 100 MHz SLAM applied to typical ceramic specimens.

Roth, Don J.↗
NASA NTRS1994

Floating shock fitting via Lagrangian adaptive meshes

In recent works we have formulated a new approach to compressible flow simulation, combining the advantages of shock-fitting and shock-capturing. Using a cell-centered Roe scheme discretization on unstructured meshes, we warp the mesh while marching to steady state, so that mesh edges align with shocks and other discontinuities. This new algorithm, the Shock-fitting Lagrangian Adaptive Method (SLAM) is, in effect, a reliable shock-capturing algorithm which yields shock-fitted accuracy at convergence. Shock-capturing algorithms like this, which warp the mesh to yield shock-fitted accuracy, are new and relatively untried. However, their potential is clear. In the context of sonic booms, accurate calculation of near-field sonic boom signatures is critical to the design of the High Speed Civil Transport (HSCT). SLAM should allow computation of accurate N-wave pressure signatures on comparatively coarse meshes, significantly enhancing our ability to design low-boom configurations for high-speed aircraft.

Vanrosendale, John↗
NASA NTRS2012

Fully Self-Contained Vision-Aided Navigation and Landing of a Micro Air Vehicle Independent from External Sensor Inputs

Direct-lift micro air vehicles have important applications in reconnaissance. In order to conduct persistent surveillance in urban environments, it is essential that these systems can perform autonomous landing maneuvers on elevated surfaces that provide high vantage points without the help of any external sensor and with a fully contained on-board software solution. In this paper, we present a micro air vehicle that uses vision feedback from a single down looking camera to navigate autonomously and detect an elevated landing platform as a surrogate for a roof top. Our method requires no special preparation (labels or markers) of the landing location. Rather, leveraging the planar character of urban structure, the landing platform detection system uses a planar homography decomposition to detect landing targets and produce approach waypoints for autonomous landing. The vehicle control algorithm uses a Kalman filter based approach for pose estimation to fuse visual SLAM (PTAM) position estimates with IMU data to correct for high latency SLAM inputs and to increase the position estimate update rate in order to improve control stability. Scale recovery is achieved using inputs from a sonar altimeter. In experimental runs, we demonstrate a real-time implementation running on-board a micro aerial vehicle that is fully self-contained and independent from any external sensor information. With this method, the vehicle is able to search autonomously for a landing location and perform precision landing maneuvers on the detected targets.

autonomous landing↗
NASA NTRSDate not supplied

Mobile LiDAR as A Tool for Terrestrial and Planetary Cave Exploration and Mapping

The Kinematic Navigation and Cartography Knapsack (KNaCK) team at NASA’s Marshall Space Flight Center in Huntsville, Alabama is developing tools that enable ultra-high resolution terrain mapping and navigation using mobile LiDAR (Light Detection and Ranging) and SLAM (Simultaneous Localization and Mapping) algorithms in fully GPS-denied and unilluminated environments. The backpack mounted LiDAR instrument under development by our team demonstrates the potential of mobile SLAM LiDAR for use in challenging lunar and planetary surface environments as well as for lunar, planetary, and terrestrial cave exploration, study, and utilization.

LiDAR↗
NASA NTRS2025

Simultaneous Localization and Mapping for Spacecraft Rendezvous and Proximity Operations Using Random Finite Sets

Future space missions require spacecraft to autonomously navigate non-cooperative environments for rendezvous and proximity operations (RPO). Current navigation filters used for RPO can have difficulty when optical sensors are used, due to complications with data association, high measurement uncertainty, and clutter. This paper provides an initial demonstration of the feasibility of using random finite set (RFS) filters for spacecraft relative navigation and pose estimation. Spacecraft relative navigation is formulated as a simultaneous localization and mapping (SLAM) problem, in which an observer spacecraft seeks to simultaneously estimate the location of features on a target object or spacecraft as well as its relative position, velocity and attitude. Simulated flash LIDAR measurements are processed using a Gaussian Mixture Probability Hypothesis Density (GMPHD) filter embedded in a particle filter to obtain a feature map of a target and a relative pose estimate between the target and observer over time. Results show that an RFS-based filter can successfully perform SLAM in a spacecraft relative navigation scenario.

David E Gaylor↗
NASA NTRSDate not supplied

The Kinematic Navigation and Cartography Knapsack (KNaCK): Demonstrating SlLAM (Simultaneous Localization and Mapping) LiDAR as a Tool for Exploration and Mapping of Lunar Pits and Caves

KNaCK (Kinematic Navigation and Cartography Knapsack) is a backpack-mounted mobile LiDAR (Light Detection and Ranging) system. It can map its surroundings in 3 dimensions and localize itself in space. The project is exploring how LiDAR can advance terrain mapping and navigation at the lunar south pole. KNaCK is lead by Dr. Michael Zanetti of NASA MSFC’s Heliophysics and Planetary Science Branch. - KNaCK serves as - A test article for GPS denied mapping and navigation. - A test bed for SLAM (Simultaneous Localization and Mapping) algorithms. - A test bed for commercial LiDAR units. - A tool for terrestrial science.

LiDAR↗
NASA NTRSDate not supplied

Caves as Planetary Analogs for GPS Denied, Low-Light Mapping and Navigation in Rugged Environments

KNaCK (Kinematic Navigation and Cartography Knapsack) is a backpack-mounted mobile mapping system. It can map its surroundings in 3 dimensions and localize itself in space using a LiDAR (Light Detection and Ranging) sensor and SLAM (Simultaneous Localization and Mapping) algorithm. The KNaCK team is leveraging caves as a proving ground to refine technology for mapping and navigation on other worlds while simultaneously advancing the State of the Art for terrestrial cave exploration and study.

LiDAR↗
NASA NTRSDate not supplied

Caves as Planetary Analogs for GPS Denied, Low-Light Mapping and Navigation in Rugged Environments

KNaCK (Kinematic Navigation and Cartography Knapsack) is a backpack-mounted mobile mapping system. It can map its surroundings in 3 dimensions and localize itself in space using a LiDAR (Light Detection and Ranging) sensor and SLAM (Simultaneous Localization and Mapping) algorithm. The KNaCK team is leveraging caves as a proving ground to refine technology for mapping and navigation on other worlds while simultaneously advancing the State of the Art for terrestrial cave exploration and study.

Relevant environment testing↗
NASA NTRSDate not supplied

Mobile LiDAR as a Tool for Terrestrial and Planetary Cave Exploration and Mapping

KNaCK (Kinematic Navigation and Cartography Knapsack) is a backpack-mounted mobile mapping system. It can map its surroundings in 3 dimensions and localize itself in space using a LiDAR (Light Detection and Ranging) sensor and SLAM (Simultaneous Localization and Mapping) algorithm. The KNaCK team is leveraging caves as a proving ground to refine technology for mapping and navigation on other worlds while simultaneously advancing the State of the Art for terrestrial cave exploration and study.

LiDAR↗
NASA NTRSDate not supplied

Caves as Planetary Analogs for GPS Denied, Low-Light Mapping and Navigation in Rugged Environments. Lightning Talk. LSIC 2023 Fall Meeting.

KNaCK (Kinematic Navigation and Cartography Knapsack) is a backpack-mounted mobile mapping system. It can map its surroundings in 3 dimensions and localize itself in space using a LiDAR (Light Detection and Ranging) sensor and SLAM (Simultaneous Localization and Mapping) algorithm. The KNaCK team is leveraging caves as a proving ground to refine technology for mapping and navigation on other worlds while simultaneously advancing the State of the Art for terrestrial cave exploration and study.

Relevant environment testing↗
NASA NTRSDate not supplied

Caves as Planetary Analogs for GPS Denied, Low-Light Mapping and Navigation in Rugged Environments

KNaCK (Kinematic Navigation and Cartography Knapsack) is a backpack-mounted mobile mapping system. It can map its surroundings in 3 dimensions and localize itself in space using a LiDAR (Light Detection and Ranging) sensor and SLAM (Simultaneous Localization and Mapping) algorithm. The KNaCK team is leveraging caves as a proving ground to refine technology for mapping and navigation on other worlds while simultaneously advancing the State of the Art for terrestrial cave exploration and study.

LiDAR↗
NASA NTRS1979

Foil system fatigue load environments for commercial hydrofoil operation

The hydrofoil fatigue loads environment in the open sea is examined. The random nature of wave orbital velocities, periods and heights plus boat heading, speed and control system design are considered in the assessment of structural fatigue requirements. Major nonlinear load events such as hull slamming and foil unwetting are included in the fatigue environment. Full scale rough water load tests, field experience plus analytical loads work on the model 929 Jetfoil commercial hydrofoil are discussed. The problem of developing an overall sea environment for design is defined. State of the art analytical approaches are examined.

Graves, D. L.↗