Search NASA⌕ Search

SEARCH · Search NASA

Results for “soil biodegradation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

52 records · Page 3

Estimating biofuel contaminant concentration from 4D ERT with mixing models

Here, we present the results of a lab-scaled feasibility study to assess the performance of electrical resistivity tomography for detection, characterization, and monitoring of fuel grade ethanol releases to the subsurface. Further, we attempt to determine the concentration distribution of the ethanol from the electrical resistivity tomography data using mixing-models. Ethanol is a renewable fuel source as well as an oxygenate fuel additive currently used to replace the known carcinogen methyl tert-butyl ether; however, ethanol is preferentially biodegraded and a cosolvent. When introduced to areas previously impacted by nonethanol-based fuels, it will facilitate the persistence of carcinogenic fuel compounds like benzene and ethylbenzene, as well as remobilize them to the ground water. These compounds would otherwise be retained in the soil column undergoing active or passive remediation processes such as soil vapor extraction or natural attenuation. Here, we introduce ethanol to a saturated Ottawa sand in a tank instrumented for four-dimensional geoelectrical measurements. Forward model results suggest pure phase ethanol released into a water saturated silica sand should present a detectable target for electrical resistivity tomography relative to a saturated silica sand only. We observe the introduction of ethanol to the closed hydraulic system and subsequent migration over the duration of the experiment. One-dimensional and three–dimensional temporal data are assessed for the detection, characterization, and monitoring of the ethanol release. Results suggest one-dimensional geoelectrical measurements may be useful for monitoring a release, while three-dimensional geoelectrical field imaging would be useful to characterize, monitor, and design effective remediation approaches for an ethanol release, assuming field conditions do not preclude the application of geoelectrical methods. We then attempt to use predictive mixing models to calculate the distribution of ethanol concentration within the measurement domain. For this study we examine four different models: a nested parallel mixing model, a nested cubic mixing model, the complex refractive index model (CRIM), and the Lichtenecker-Rother (L-R) model. The L-R model, modified to include an electrical formation factor geometry term, provided the best agreement with expected EtOH concentrations.

09 BIOMASS FUELS↗

Making an s1G Self-Preserving Environmental DNA (eDNA) Filter from Sustainable Materials

Environmental DNA (eDNA) sampling of aquatic environments is a powerful new tool for resource managers to use in detecting the presence of rare and endangered species. The use of eDNA for species detection is quickly becoming an industry-standard methodology in environmental science, and the technology sector is moving quickly to create purpose-built tools for eDNA sampling. Smith-Root, Inc. pioneered the new technology of self-preserving eDNA filters that automatically preserve the DNA captured on filters by desiccating the internal filter membrane. This capability saves the sampling technician significant time in the field and drastically reduces the potential for sample contamination. One main constraint of this new technology, however, is the necessity of single-use plastics for eDNA sampling. Single-use designs are employed because sampling equipment must be devoid of potential contaminating DNA, and the time required to sterilize equipment is often not cost-effective for practitioners. Thus, this technology is creating a significant new source of plastic waste—something that eDNA practitioners, and society, would like to avoid. This project explores the use of alternative bio based polymers and composites as replacements for incumbent industrial standards for eDNA filtration systems, with an emphasis on ease of processing and biodegradable options. 8 candidate materials, 3 for the top filter housing and 5 for the bottom filter housing, were investigated to replace incumbent housing materials. Of the 8 candidates, 2 materials were identified for future investigation which met performance requirements, were bio-based and could potentially offer better disposal options like soil degradation or composting, features sought by the customers of these products. The top housing candidate, material 1, has comparable performance to the incumbent material and equally manufacturable. The bottom housing candidate, material 6, improved desiccation performance by 81% after 1 hour in comparison to the incumbent material, is 100% bio-based, compostable and can be sourced domestically throughout the U.S.A.

36 MATERIALS SCIENCE↗

Hycrest crested wheatgrass accelerates the degradation of pentachlorophenol in soil

We investigated the effects of vegetation on the fate of pentachlorophenol (PCP) in soil using a novel high-flow sealed test system. Pentachlorophenol has been widely used as a wood preservative, and this highly toxic biocide contaminates soil and ground water at many sites. Although plants are known to accelerate the rates of degradation of certain soil contaminants, this approach has not been thoroughly investigated for PCP. The fate of [14C]PCP, added to soil at a concentration of 100 mg/kg, was compared in three unplanted and three planted systems. The plant used was Hycrest, a perennial, drought-tolerant cultivar of crested wheatgrass [Agropyron desertorum (Fischer ex Link) Schultes]. The flow-through test system allowed us to maintain a budget for 14C-label as well as monitor mineralization (breakdown to 14CO2) and volatilization of the test compound in a 155-d trial. In the unplanted systems, an average of 88% of the total radiolabel remained in the soil and leachate and only 6% was mineralized. In the planted system, 33% of the radiolabel remained in the soil plus leachate, 22% was mineralized, and 36% was associated with plant tissue (21% with the root fraction and 15% with shoots). Mineralization rates were 23.1 mg PCP mineralized kg-1 soil in 20 wk in the planted system, and for the unplanted system 6.6 mg PCP kg-1 soil for the same time period. Similar amounts of volatile organic material were generated in the two systems (1.5%). Results indicated that establishing crested wheatgrass on PCP-contaminated surface soils may accelerate the removal of the contaminant.

Non-NASA Center↗

Biochar-compost-based controlled-release nitrogen fertilizer intended for an active microbial community

Nitrogen (N) fertilizers in agriculture suffer losses by volatilization of N to the air, surface runoff and leaching into the soil, resulting in low N use efficiency (NUE) (< 50%) and raising severe environmental pollutions. Controlled- release nitrogen fertilizers (CRNFs) can control the release of N nutrients to NUE in crop production. Different methods were used to develop new CRNFs. However, different CRNF technologies are still underdeveloped due to inadequate controlling on N releasing time and/or unsustainable diffusion. The study on the influences of CRNF processing parameters on microbial conditions are lacking when the CRNFs composed of various bio-ingredients such as biochar, composts, and biowaste. The complexity of processing methods, material biodegradability, and other physical properties make current CRNFs of questionable value in agricultural production. This research aims to develop a novel biochar-compost-based controlled-release urea fertilizer (BCRUF) to preserve microbial properties carried by the compost. The BCRUF was synthesized by pelletizing the 50:50 (dry, wt/wt) mixture of biochar and compost. BCRUF was loaded with urea and then spray-coated with polylactic acid (PLA). The releasing time of two types of BCRUFs, coated and uncoated with PLA, for 80% of N release in water was up to 6 h at three different temperatures (4, 23, and 40 °C), compared to conventional urea fertilizer and commercial environmentally smart N (ESN) fertilizer. The releasing time of coated BCRUF for 80% N release in soil was up to 192 h (8 days). Fourier-transform infrared spectroscopy (FTIR) analysis revealed that no new functional groups were found in the release solution, indicating no new chemical hazards generated. The differential scanning calorimetry (DSC) tests also verified that its thermal stability could be up to 160 °C. The microbe populations in the BCRUF pellets were reduced after the pelleting and drying processes in BCRUF fabrication, but a few bacteria can endure in the air-drying process. BCRUF pellets soaked in water for 4 days retained some bacteria. The BCRUF showed very promising characteristics to improve NUE and sustainability in agricultural production.

58 GEOSCIENCES↗

Bridging 20 Years of Soil Organic Matter Frameworks: Empirical Support, Model Representation, and Next Steps

Abstract In the past few decades, there has been an evolution in our understanding of soil organic matter (SOM) dynamics from one of inherent biochemical recalcitrance to one deriving from plant‐microbe‐mineral interactions. This shift in understanding has been driven, in part, by influential conceptual frameworks which put forth hypotheses about SOM dynamics. Here, we summarize several focal conceptual frameworks and derive from them six controls related to SOM formation, (de)stabilization, and loss. These include: (a) physical inaccessibility; (b) organo‐mineral and ‐metal stabilization; (c) biodegradability of plant inputs; (d) abiotic environmental factors; (e) biochemical reactivity and diversity; and (f) microbial physiology and morphology. We then review the empirical evidence for these controls, their model representation, and outstanding knowledge gaps. We find relatively strong empirical support and model representation of abiotic environmental factors but disparities between data and models for biochemical reactivity and diversity, organo‐mineral and ‐metal stabilization, and biodegradability of plant inputs, particularly with respect to SOM destabilization for the latter two controls. More empirical research on physical inaccessibility and microbial physiology and morphology is needed to deepen our understanding of these critical SOM controls and improve their model representation. The SOM controls are highly interactive and also present some inconsistencies which may be reconciled by considering methodological limitations or temporal and spatial variation. Future conceptual frameworks must simultaneously refine our understanding of these six SOM controls at various spatial and temporal scales and within a hierarchical structure, while incorporating emerging insights. This will advance our ability to accurately predict SOM dynamics.

54 ENVIRONMENTAL SCIENCES↗

Regenerating using aqueous cleaners with ozone and electrolysis

A new process converts organic oil and grease contaminates in used water based cleaners into synthetic surfactants. This permits the continued use of a cleaning solution long after it would have been dumped using previously known methods. Since the organic soils are converted from contaminates to cleaning compounds the need for frequent bath dumps is totally eliminated. When cleaning solutions used in aqueous cleaning systems are exhausted and ready for disposal, they will always contain the contaminates removed from the cleaned parts and drag-in from prior cleaning steps. Even when the cleaner is biodegradable these contaminants will frequently cause the waste cleaning solution to be a hazardous waste. Chlorinated solvents are rapidly being replaced by aqueous cleaners to avoid the new ozone-depletion product-labeling-law. Many industry standard halocarbon based solvents are being completely phased out of production, and their prices have nearly tripled. Waste disposal costs and cradle-to-grave liability are also major concerns for industry today. This new process reduces the amount of water and chemicals needed to maintain the cleaning process. The cost of waste disposal is eliminated because the water and cleaning compounds are reused. Energy savings result by eliminating the need for energy currently used to produce and deliver fresh water and chemicals as well as the energy used to treat and destroy the waste from the existing cleaning processes. This process also allows the cleaning bath to be maintained at the peak performance of a new bath resulting in decreased cycle times and decreased energy consumption needed to clean the parts. This results in a more efficient and cost effective cleaning process.

Mcginness, Michael P.↗

A Rhodopseudomonas strain with a substantially smaller genome retains the core metabolic versatility of its genus

ABSTRACT Rhodopseudomonas are a group of phototrophic microbes with a marked metabolic versatility and flexibility that underpins their potential use in the production of value-added products, bioremediation, and plant growth promotion. Members of this group have an average genome size of about 5.5 Mb, but two closely related strains have genome sizes of about 4.0 Mb. To identify the types of genes missing in a reduced genome strain, we compared strain DSM127 with other Rhodopseudomonas isolates at the genomic and phenotypic levels. We found that DSM127 can grow as well as other members of the Rhodopseudomonas genus and retains most of their metabolic versatility, but it has many fewer genes associated with high-affinity transport of nutrients, iron uptake, nitrogen metabolism, and biodegradation of aromatic compounds. This analysis indicates genes that can be deleted in genome reduction campaigns and suggests that DSM127 could be a favorable choice for biotechnology applications using Rhodopseudomonas or as a strain that can be engineered further to reside in a specialized natural environment. IMPORTANCE Rhodopseudomonas are a cohort of phototrophic bacteria with broad metabolic versatility. Members of this group are present in diverse soil and water environments, and some strains are found associated with plants and have plant growth-promoting activity. Motivated by the idea that it may be possible to design bacteria with reduced genomes that can survive well only in a specific environment or that may be more metabolically efficient, we compared Rhodopseudomonas strains with typical genome sizes of about 5.5 Mb to a strain with a reduced genome size of 4.0 Mb. From this, we concluded that metabolic versatility is part of the identity of the Rhodopseudomonas group, but high-affinity transport genes and genes of apparent redundant function can be dispensed with.

59 BASIC BIOLOGICAL SCIENCES↗

Treatment to Destroy Chlorohydrocarbon Liquids in the Ground

A relatively simple chemical treatment that involves the use of emulsified iron has been found to be effective in remediating groundwater contaminated with trichloroethylene and other dense chlorohydrocarbon liquids. These liquids are members of the class of dense, nonaqueous phase liquids (DNAPLs), which are commonly recognized to be particularly troublesome as environmental contaminants. The treatment converts these liquids into less-harmful products. As a means of remediation of contaminated groundwater, this treatment takes less time and costs less than do traditional pump-and-treat processes. At some sites, long-term leakage and/or dissolution of chlorohydrocarbon liquids from pools and/or sorbed concentrations in rock and soil gives rise to a need to continue pumpand- treat processes for times as long as decades in order to maintain protection of human health and the environment. In contrast, the effects of the emulsified-iron treatment are more lasting, decreasing the need for long-term treatment and monitoring of contaminated areas. The material used in this treatment consists of iron particles with sizes of the order of nanometers to micrometers contained within the micelles of a surfactant-stabilized, biodegradable, oil-in-water emulsion. The emulsion is simple to prepare and consists of relatively inexpensive and environmentally acceptable ingredients: One typical formulation consists of 1.3 weight percent of a food-grade surfactant, 17.5 weight percent of iron particles, 23.2 weight percent of vegetable oil, and 58.0 weight percent of water.

Quinn, Jacqueline↗

Nanoscale and Microscale Iron Emulsions for Treating DNAPL

This study demonstrated the feasibility of using emulsified nanoscale and microscale iron particles to enhance dehalogenation of (Dense Non-Aqueous Phase Liquid) DNAPL free-phase. The emulsified system consisted of a surfactant-stabilized, biodegradable oil-in-water emulsion with nanoscale or microscale iron particles contained within the emulsion droplets. It was demonstrated that DNAPLs, such as trichloroethene (TCE), diffuse through the oil membrane of the emulsion particle whereupon they reach an aqueous interior and the surface of an iron particle where dehalogenation takes place. The hydrocarbon reaction by-products of the dehalogenation reaction, primarily ethene (no chlorinated products detected), diffuse out of the emulsion droplet. This study also demonstrated that an iron-emulsion system could be delivered in-situ to the DNAPL pool in a soil matrix by using a simulated push well technique. Iron emulsions degraded pure TCE at a rate comparable to the degradation of dissolved phase TCE by iron particles, while pure iron had a very low degradation rate for free-phase TCE. The iron-emulsion systems can be injected into a sand matrix where they become immobilized and are not moved by flowing water. It has been documented that surfactant micelles possess the ability to pull pooled TCE into emulsion droplets where degradation of TCE takes place.

Geiger, Cherie L.↗

Iron-activated persulfate oxidation degrades aqueous Perfluorooctanoic acid (PFOA) at ambient temperature

Perfluorooctanoic acid (PFOA, C 8 HF 15 O 2 ) is an industrial surfactant that is highly resistant to natural breakdown processes such as those mediated by heat, hydrolysis, photolysis, and biodegradation. Many efforts have been developed to breakdown PFOA to less harmful species due to its widespread human exposure and potential toxicity. However, these methods require high temperature or specialized equipment with serious disadvantages of high energy cost for long-term use. For this paper, we investigated the effectiveness of PFOA degradation by ferrous iron-activated persulfate oxidation (IAPO) under various aqueous geochemical conditions. Approximately 64% of PFOA (initial concentration = 1.64 μmol L –1 ) was degraded after 4 h under illuminated anoxic conditions at ambient temperature. This degradation rate and magnitude support the potential use of IAPO as a novel inexpensive and environmentally friendly method to remediate PFOA in soil and groundwater.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Competition within low-density bacterial populations as an unexpected factor regulating carbon decomposition in bulk soil

Bacterial decomposition of organic matter in soils is generally believed to be mainly controlled by the access bacteria have to organic substrate. The influence of bacterial traits on this control has, however, received little attention. Using the substrate-dependent Monod growth model, we develop a bioreactive transport model to screen the interactive impacts of spatial dispersion and bacterial traits on mineralization. Bacterial traits primarily involved in the bacterial response to the substrate concentration, such as the maximum specific uptake rate and efficiency, the adaptation time of the uptake rate and the initial population density, are considered. We compare the model results with two sets of previously performed cm-scale soil-core experiments in which the mineralization of the pesticide 2,4-D was measured under well-controlled initial distributions and transport conditions. Bacterial dispersion away from the initial substrate location induced a significant increase in 2,4-D mineralization. Additionally, it reveals an increase of specific uptake rates at lower bacterial densities, more than compensating the decrease of specific uptake rates caused by substrate dilution. This regulation of bacterial activities by density, caused by the local depletion of substrate by competing bacteria, becomes dominant for bacteria with an efficient uptake of substrate at low substrate concentrations (a common feature of oligotrophs). Such oligotrophs, commonly found in soils, compete with each other for substrate even at remarkably low population densities. The ratio-dependent Contois growth model, which includes a density regulation in the expression of the uptake efficiency, is more accurate and convenient to calibrate than the substrate-dependent Monod model, at least under these conditions. In view of their strong interactions, bioreactive and transport processes cannot be handled independently but should be integrated, in particular when reactive processes of interest are carried out by oligotrophs.

59 BASIC BIOLOGICAL SCIENCES↗

Valiant 'Zero-Valent' Effort Restores Contaminated Grounds

Dense non-aqueous phase liquids (DNAPLs) are chemical compounds that can contaminate soil and groundwater to the point of irreparability. These substances are only slightly soluble in water, and are much denser than water. Because of their solubility, DNAPLs form separate liquid phases in groundwater, and because of their density, DNAPLs sink in aquifers instead of floating at the water table, making it extremely difficult to detect their presence. If left untreated in the ground, they can taint fresh water sources. Common DNAPLs include chlorinated hydrocarbon compounds such as carbon tetrachloride, chloroform, tetrachloroethylene, and trichloroethylene. Trichloroethylene was used during the early days of the Space Program, as a solvent for flushing rocket engines, and for metal cleaning and degreasing of equipment, electronics, and heavy machinery. As a result, areas of Cape Canaveral s Launch Complex 34, the site of several historic Saturn rocket launches occurring from 1959 to 1968, were polluted with chlorinated DNAPLs. Through the direction and guidance of Dr. Jacqueline Quinn, an environmental engineer in the Spaceport Engineering and Technology Directorate at NASA s Kennedy Space Center, a biodegradable environmental cleanup technology was developed to reductively dechlorinate DNAPL sources in polluted water at Launch Complex 34. It was important for Kennedy to nip this problem in the bud, in light of the fact that the Space Center is also a National Wildlife Refuge, home to thousands of shorebirds, endangered sea turtles and eagles, manatees, alligators, and diverse habitats that include brackish marshes and salt water estuaries. The success in remediating this historic launch site has led to numerous commercial applications that are restoring the health of our environmental surroundings.

Source record↗

Mechanistic and predictive understanding of needle litter decay in semi-arid mountain ecosystems experiencing unprecedented vegetation mortality. Final report

This research compared needle litter decay rates and underlying mechanisms between litter released from insect-killed trees to that of naturally senesced litter from healthy trees across climate variables with elevation and snowmelt rates as variables. Our research was designed to address questions of whether there is a significant impact to C and N cycling at the terrestrial-atmospheric interface in association with pine needle decomposition and the role of changes in soil moisture and temperature as a function of these processes. Field activities were primarily conducted within the Rocky Mountain Biological Laboratory’s (RMBL) East River watershed across a spectrum of ecoregions that spanned approximately 700 vertical meters. Forested catchments at these elevations in southwestern Colorado are threatened by heat-induced drought, altered snowmelt patterns, and invasive insect infestation that have all been associated with climate change. Needle litter from two members of the Pinaceae family experiencing large-scale insect infestations (spruce and lodgepole pine) were collected, redeployed and then sampled over the course of three years. We experimentally tested three tractable parameters that are known to impact litter decay and biogeochemical cycling and are relevant to bark beetle-induced tree mortality: (1) moisture content, (2) temperature by using elevation as a surrogate, and (3) changes to litter compositional chemistry that result from beetle infestation. We examined decay processes and monitored the migration of soluble and gaseous nitrogen and carbon species as well as microbiological signatures of decay such as biodegradable fractions, metal availability and the temporal succession of associated microorganisms at the terrestrial interface.

54 ENVIRONMENTAL SCIENCES↗

Genome-based analysis for the bioactive potential of Streptomyces yeochonensis CN732, an acidophilic filamentous soil actinobacterium

Background: Acidophilic members of the genus Streptomyces can be a good source for novel secondary metabolites and degradative enzymes of biopolymers. In this study, a genome-based approach on Streptomyces yeochonensis CN732, a representative neutrotolerant acidophilic streptomycete, was employed to examine the biosynthetic as well as enzymatic potential, and also presence of any genetic tools for adaptation in acidic environment. Results: A high quality draft genome (7.8Mb) of S. yeochonensis CN732 was obtained with a G+C content of 73.53% and 6549 protein coding genes. The in silico analysis predicted presence of multiple biosynthetic gene clusters (BGCs), which showed similarity with those for antimicrobial, anticancer or antiparasitic compounds. However, the low levels of similarity with known BGCs for most cases suggested novelty of the metabolites from those predicted gene clusters. The production of various novel metabolites was also confirmed from the combined high performance liquid chromatography-mass spectrometry analysis. Through comparative genome analysis with related Streptomyces species, genes specific to strain CN732 and also those specific to neutrotolerant acidophilic species could be identified, which showed that genes for metabolism in diverse environment were enriched among acidophilic species. In addition, the presence of strain specific genes for carbohydrate active enzymes (CAZyme) along with many other singletons indicated uniqueness of the genetic makeup of strain CN732. The presence of cysteine transpeptidases (sortases) among the BGCs was also observed from this study, which implies their putative roles in the biosynthesis of secondary metabolites. Conclusions: This study highlights the bioactive potential of strain CN732, an acidophilic streptomycete with regard to secondary metabolite production and biodegradation potential using genomics based approach. The comparative genome analysis revealed genes specific to CN732 and also those among acidophilic species, which could give some insights into the adaptation of microbial life in acidic environment.

59 BASIC BIOLOGICAL SCIENCES↗

Description of a novel extremophile green algae, Chlamydomonas pacifica , and its potential as a biotechnology host

We present the comprehensive characterization of a newly identified microalga, Chlamydomonas pacifica , originally isolated from a soil sample in San Diego, CA, USA. This species showcases remarkable biological versatility, including a broad pH range tolerance (6–11.5), high thermal tolerance (up to 42 °C), and salinity resilience (up to 2 % NaCl). Its amenability to genetic manipulation and sexual reproduction via mating, particularly between the two opposing strains CC-5697 & CC-5699, now publicly available through the Chlamydomonas Resource Center, underscores its potential as a biotechnological chassis. The biological assessment of C. pacifica revealed versatile metabolic capabilities, including diverse nitrogen assimilation capability, motility and phototaxis. Genomic and transcriptomic analyses identified 17,829 genes within a 121 Mb genome, featuring a GC content of 61 %. The codon usage of C. pacifica closely mirrors that of C. reinhardtii , indicating a conserved genetic architecture that supports a trend in codon preference with minor variations. Phylogenetic analyses position C. pacifica within the core-Reinhardtinia clade yet distinct from known Volvocales species. The lipidomic data revealed an abundance of triacylglycerols (TAGs), promising for biofuel applications and lipids for health-related benefits. Our investigation lays the groundwork for exploiting C. pacifica in biotechnological applications, from biofuel generation to synthesizing biodegradable plastics, positioning it as a versatile host for future bioengineering endeavors.

Alkali tolerant↗

Correction to “Greenhouse Gas and Air Pollutant Emissions from Composting”

Composting can divert organic waste from landfills, reduce landfill methane emissions, and recycle nutrients back to soils. However, the composting process is also a source of greenhouse gas and air pollutant emissions. Researchers, regulators, and policy decision-makers all rely on emissions estimates to develop local emissions inventories and weigh competing waste diversion options, yet reported emission factors are difficult to interpret and highly variable. This review explores the impacts of waste characteristics, pretreatment processes, and composting conditions on CO 2 , CH 4 , N 2 O, NH 3 , and VOC emissions by critically reviewing and analyzing 388 emission factors from 46 studies. The values reported to date suggest that CH 4 is the single largest contributor to 100-year global warming potential (GWP100) for yard waste composting, comprising approximately 80% of the total GWP 100 . For nitrogen-rich wastes including manure, mixed municipal organic waste, and wastewater treatment sludge, N 2 O is the largest contributor to GWP 100 , accounting for half to as much as 90% of the total GWP 100 . If waste is anaerobically digested prior to composting, N 2 O, NH 3 , and VOC emissions tend to decrease relative to composting the untreated waste. Effective pile management and aeration are key to minimizing CH 4 emissions. However, forced aeration can increase NH 3 emissions in some cases.

54 ENVIRONMENTAL SCIENCES↗