Crystallography, Morphology, Electronic Structure, and Transport in Non-Fullerene/Non-Indacenodithienothiophene Polymer:Y6 Solar Cells
Explore the source record for details and available documents.
99 GENERAL AND MISCELLANEOUS↗
SEARCH · Search NASA
Results for “solar conversion efficiency”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Maximizing the external radiative efficiency of hybrid perovskite solar cells
Despite rapid advancements in power conversion efficiency in the last decade, perovskite solar cells still perform below their thermodynamic efficiency limits. Non-radiative recombination, in particular, has limited the external radiative efficiency and open circuit voltage in the highest performing devices. We review the historical progress in enhancing perovskite external radiative efficiency and determine key strategies for reaching high optoelectronic quality. Specifically, we focus on non-radiative recombination within the perovskite layer and highlight novel approaches to reduce energy losses at interfaces and through parasitic absorption. By strategically targeting defects, it is likely that the next set of record-performing devices with ultra-low voltage losses will be achieved.
14 SOLAR ENERGY↗
Mixed Self-Assembled Monolayers for High-Photovoltage Tin Perovskite Solar Cells
Self-assembled monolayers (SAMs) are used as potent hole transport layers (HTLs) in lead-based perovskite solar cells, enabling large quasi-Fermi level splitting for high photovoltage (>1.1 V) with a deficit of <0.5 V. However, tin-based perovskite solar cells (TPSCs) with SAM HTLs suffer from low photovoltage (<0.65 V) with a deficit of >0.7 V. Herein we employ a holistic approach to tackle this significant challenge by designing a mixed SAM, engineering a compatible tin perovskite thin film, and leveraging an efficient electron transport layer. Consequently, high photovoltage of 0.829 V is achieved with an efficiency of 9.4%, which is a record to our knowledge among TPSCs using SAMs as sole HTLs. Finally, while SAMs have been little used in TPSCs thus far, our holistic approach should catalyze their future advancements toward outperformance.
36 MATERIALS SCIENCE↗
Comparative study on the overall energy performance between photovoltaic and Low-E insulated glass units
In this report a novel semi-transparent building integrated photovoltaic (BIPV) laminate was developed and introduced in this paper. It was produced by cutting standard mono-crystalline silicon solar cells into small strips and then making electrical connections between each strip before laminating the cells between two layers of glass. The overall energy performance and energy saving potential of the BIPV insulated glass unit (IGU) under real world conditions were identified through a side by side comparative study. Compared to the reference IGU, the BIPV IGU had lower solar heat gain coefficient (SHGC) but much higher U-factor. The average HVAC electricity saving of the BIPV IGU was about 10% relative to the reference IGU. Daylighting measurement and analysis were carried out to evaluate the trade-offs associated with the BIPV IGU between daylight, glare, and lighting energy use. The results indicated that the BIPV IGU is better than the reference IGU in reducing discomfort glare. However, if the most conservative viewpoint near the window is used for the assessment, a lower transmittance BIPV IGU is required to bring the overall discomfort levels below the perceptible level. Lastly, the net energy saving potential associated with the novel BIPV IGU was identified based on the power, thermal and daylighting performance. On average, the BIPV IGU saved 16.8% of the total electricity use of the room. Further studies and improvement on the energy conversion efficiency of solar cells, the optimal transmittance as well as the thermal properties would make this technology more energy-efficient and affordable.
14 SOLAR ENERGY↗
Interface-modulated kinetic differentials in electron and hole transfer rates as a key design principle for redox photocatalysis by Sb2VO5/QD heterostructures
The efficient conversion of solar energy to chemical energy represents a critical bottleneck to the energy transition. Photocatalytic splitting of water to generate solar fuels is a promising solution. Semiconductor quantum dots (QDs) are prime candidates for light-harvesting components of photocatalytic heterostructures, given their size-dependent photophysical properties and band-edge energies. A promising series of heterostructured photocatalysts interface QDs with transition-metal oxides which embed midgap electronic states derived from the stereochemically active electron lone pairs of p-block cations. Here, we examine the thermodynamic driving forces and dynamics of charge separation in Sb2VO5/CdSe QD heterostructures, wherein a high density of Sb 5s2-derived midgap states are prospective acceptors for photogenerated holes. Hard-x-ray valence band photoemission spectroscopy measurements of Sb2VO5/CdSe QD heterostructures were used to deduce thermodynamic driving forces for charge separation. Interfacial charge transfer dynamics in the heterostructures were examined as a function of the mode of interfacial connectivity, contrasting heterostructures with direct interfaces assembled by successive ion layer adsorption and reaction (SILAR) and interfaces comprising molecular bridges assembled by linker-assisted assembly (LAA). Transient absorption spectroscopy measurements indicate ultrafast (<2 ps) electron and hole transfer in SILAR-derived heterostructures, whereas LAA-derived heterostructures show orders of magnitude differentials in the kinetics of hole (<100 ps) and electron (∼1 ns) transfer. The interface-modulated kinetic differentials in electron and hole transfer rates underpin the more effective charge separation, reduced charge recombination, and greater photocatalytic efficiency observed for the LAA-derived Sb2VO5/CdSe QD heterostructures.
Chemistry↗
Unraveling the Photovoltaic, Mechanical, and Microstructural Properties and Their Correlations in Simple Poly(3‐pentylthiophene) Solar Cells
Abstract The power conversion efficiency of polythiophene organic solar cells is constantly refreshed. Despite the renewed device efficiency, very few efforts have been devoted to understanding how the type of electron acceptor alters the photovoltaic and mechanical properties of these low‐cost solar cells. Herein, the authors conduct a thorough investigation of photovoltaic and mechanical characteristics of a simple yet less‐explored polythiophene, namely poly(3‐pentylthiophene) (P3PT), in three different types of organic solar cells, where ZY‐4Cl, PC 71 BM, and N2200 are employed as three representative acceptors, respectively. Compared with the reference poly(3‐hexylthiophene) (P3HT)‐based solar cells, P3PT‐based devices, all perform more efficiently. Particularly, the P3PT:ZY‐4Cl blend exhibits the highest efficiency (ca. 10%) among the six combinations and outperforms the prior top‐performance system P3HT:ZY‐4Cl. Furthermore, the blend films based on N2200 exhibit a high crack‐onset strain of ∼38% on average, which is approximately 15‐ and 17‐times higher than those of ZY‐4Cl and PC 71 BM, respectively. The microstructural origins for the above difference are well elucidated by detailed grazing incidence X‐ray scattering and microscopy analysis. This work not only underlines the potential of P3PT in prolific solar cell research but also demonstrates the superior tensile properties of polythiophene‐based all‐polymer blends for the preparation of stretchable solar cells.
Polymer Science↗
Computational Discovery of Intermolecular Singlet Fission Materials Using Many-Body Perturbation Theory
Intermolecular singlet fission (SF) is the conversion of a photogenerated singlet exciton into two triplet excitons residing on different molecules. SF has the potential to enhance the conversion efficiency of solar cells by harvesting two charge carriers from one high-energy photon, whose surplus energy would otherwise be lost to heat. The development of commercial SF-augmented modules is hindered by the limited selection of molecular crystals that exhibit intermolecular SF in the solid state. Computational exploration may accelerate the discovery of new SF materials. The GW approximation and Bethe–Salpeter equation (GW+BSE) within the framework of many-body perturbation theory is the current state-of-the-art method for calculating the excited-state properties of molecular crystals with periodic boundary conditions. In this Review, we discuss the usage of GW+BSE to assess candidate SF materials as well as its combination with low-cost physical or machine learned models in materials discovery workflows. We demonstrate three successful strategies for the discovery of new SF materials: (i) functionalization of known materials to tune their properties, (ii) finding potential polymorphs with improved crystal packing, and (iii) exploring new classes of materials. In addition, three new candidate SF materials are proposed here, which have not been published previously.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Mechanical-Bond-Enabled Highly Efficient Charge Separation in a Light-Harvesting Hetero[2]Catenane
Photodriven charge separation is a key process for converting solar energy into chemical energy. However, it remains a challenge to develop artificial light-harvesting materials that can simultaneously achieve ultrafast charge separation and a long-lived charge-separated state with low energy loss. In contrast to conventional strategies based on covalent or noncovalent interactions, we employed a mechanical bond to forcibly assemble two strongly electron-deficient cationic chromophores (TTzBo x4+ and PDI-C 2+ ), which have very similar reduction potentials and exhibit limited noncovalent interactions, into a hetero[2]catenane (TTzPCat 6+ ). This design provides efficient π electronic couplings, enabling ultrafast charge separation (<2.3 ps) even with a low driving force (|ΔG CS | ≈ 160 meV). Furthermore, the adaptive molecular conformation of TTzPCat 6+ , in combination with the Marcus inverted region effect, successfully prolongs the charge-separated state lifetime (k CS /k CR > 1000), surpassing the conventional trade-off between driving force and charge separation efficiency in heterogeneous donor–acceptor systems. The photocatalytic system based on TTzPCat 6+ exhibits an over 2-fold enhancement in selective oxidation of aryl sulfides under mild conditions, demonstrating the potential of mechanical bonding for preparing photocatalytic materials. This investigation not only highlights a strategy for achieving highly efficient charge separation with low energy loss but also offers fresh insights into developing efficient solar energy conversion systems.
Charge transfer↗
Side-chain ionization enables ultrafast intramolecular singlet fission in the azaquinodimethane skeleton
Singlet fission (SF) could significantly alleviate thermalization losses of high-energy photons, thus holding great potential for improving the power conversion efficiency of solar cells. Conventional SF materials require an intricate control of molecular packing motifs in the solid state to achieve efficient multiexciton generation. Small molecule intramolecular singlet fission (iSF) materials have emerged as promising alternatives and show great potential for practical device applications. However, the scope of such iSF materials remains rather limited, necessitating innovative molecular design strategies. Herein, we present how a side-chain ionization strategy leads to an iSF chromophore based on the azaquinodimethane (AQM) ring system. Systematic theoretical and spectroscopic analyses reveal that the direct attachment of electron-withdrawing ionic groups to the conjugated AQM core renders the originally fluorescent AQM nonemissive, leading to ionic AQM (iAQM) derivatives capable of ultrafast iSF to populate triplet-like species. Further fine-tuning of the iAQM skeleton imparts subtle intermolecular interactions that are indispensable for the efficient separation of triplet pairs following iSF in the aggregated state. Our findings offer unprecedented insights into molecular design and triplet exciton dynamics, laying the foundation for the discovery of rare molecular iSF materials.
Wu, Zixiang↗
Ammonolysis with N 2 -diluted NH 3 suppresses Ta( IV ) defects in BaTaO 2 N and enhances photocatalytic water oxidation
BaTaO 2 N stands out among oxynitride photocatalysts because of its ability to capture visible light and to drive the photoelectrochemical water oxidation reaction. However, its solar energy conversion performance is limited by electron–hole recombination at Ta( IV ) defects in the material. These defects are formed by overreduction of the Ta(v) oxide precursor by excess ammonia under the high temperature conditions during ammonolysis. Here we show for the first time that Ta( IV ) defect concentrations can be lowered by conducting the ammonolysis reaction in mixed NH 3 /N 2 gas. The obtained BaTaO 2 N samples crystallize in the cubic CaTiO 3 structure type and form 200–300 nm faceted nanocrystals, based on X-ray diffraction, scanning electron microscopy, and HRTEM. Electron paramagnetic resonance spectra observe the Ta( IV ) defects at g = 1.999 and confirm an 11-fold reduction for the product synthesized in mixed (0.13 : 1.0 vol) NH 3 /N 2 gas, equivalent to 1.14 × 10 16 cm −3 Ta( IV ) ions. This optimized BaTaO 2 N has nearly twice the photocatalytic oxygen evolution activity (AQE of 6.78% at 400 nm) of a reference material made with 1.0 atm ammonia and 78% higher photoelectrochemical water oxidation photocurrent (0.9 mA cm −2 at 1.23 V vs. RHE) under simulated sunlight. According to X-ray photoelectron spectroscopy, remaining Ta( IV ) defects are concentrated in the surface region of the BaTaO 2 N particles, where >50% of all Ta ions are found in the +4 oxidation state. This surface Ta( IV ) population can be directly observed in Vibrating Kelvin Probe Surface Photovoltage Spectra (VK-SPV) via its 1.2–1.4 eV photovoltage onset. Here, it suggests that the surface Ta( IV ) ions contribute empty d-states 0.5–0.7 eV below the BaTaO 2 N conduction band edge. These findings highlight how the energetics and concentrations of Ta( IV ) defects influence the photoelectrochemical water oxidation ability of BaTaO 2 N. Additionally, the work establishes ammonolysis with diluted NH 3 as a new tool to minimize defects in BaTaO 2 N and to raise its solar energy conversion efficiency toward its theoretical limit. Because of its simplicity, the reduced ammonia pressure strategy will likely be applicable to other oxynitrides, which generally suffer from overreduction problems during ammonolysis.
Salmanion, Mahya [University of California, Davis,↗
Synchrotron based transient x-ray absorption spectroscopy for emerging solid-state energy materials
The rational design of cutting-edge materials for an efficient solar energy conversion process is a challenging task, which demands a fundamental understanding of the mechanisms operative during the photoinduced physical and chemical reactions. In response to these issues, progress in the field has steered attention toward the use of time-resolved spectroscopic techniques to resolve the multiple intermediate species involved in these photoinduced reactions. Thanks to the advent of pump–probe technique, which leads to the development of various time-resolved spectroscopic methods, significant progress has been made in understanding the photophysical and photochemical properties (e.g., excited state dynamics, charge transfer mechanism, charge separation dynamics, etc.) of energy materials. Synchrotron-based x-ray transient absorption (XTA) spectroscopy is one of the most important time-resolved techniques to unravel the direct correlation of the material structure with their photophysical properties owing to its unique capability in directly observing electronic and structural evolution simultaneously. As a result, the aim of this work is to provide a systematic overview of the recent progress in using XTA for capturing the structural dynamics associated with excited state and charge separation dynamics in emerging solid-state energy materials.
14 SOLAR ENERGY↗
From antenna to reaction center: Pathways of ultrafast energy and charge transfer in photosystem II
The photosystem II core complex (PSII-CC) is the smallest subunit of the oxygenic photosynthetic apparatus that contains core antennas and a reaction center, which together allow for rapid energy transfer and charge separation, ultimately leading to efficient solar energy conversion. However, there is a lack of consensus on the interplay between the energy transfer and charge separation dynamics of the core complex. Here, we report the application of two-dimensional electronic-vibrational (2DEV) spectroscopy to the spinach PSII-CC at 77 K. The simultaneous temporal and spectral resolution afforded by 2DEV spectroscopy facilitates the separation and direct assignment of coexisting dynamical processes. Our results show that the dominant dynamics of the PSII-CC are distinct in different excitation energy regions. By separating the excitation regions, we are able to distinguish the intraprotein dynamics and interprotein energy transfer. Additionally, with the improved resolution, we are able to identify the key pigments involved in the pathways, allowing for a direct connection between dynamical and structural information. Specifically, we show that C505 in CP43 and the peripheral chlorophyll Chlz D1 in the reaction center are most likely responsible for energy transfer from CP43 to the reaction center.
59 BASIC BIOLOGICAL SCIENCES↗
Photon Upconversion at Organic-Inorganic Interfaces
Photon upconversion is a process that combines low-energy photons to form useful high-energy photons. There are potential applications in photovoltaics, photocatalysis, biological imaging, etc. Semiconductor quantum dots (QDs) are promising for the absorption of these low-energy photons due to the high extinction coefficient of QDs, especially in the near infrared (NIR). This allows the intriguing use of diffuse light sources such as solar irradiation. In this review, we describe the development of this organic-QD upconversion platform based on triplet-triplet annihilation, focusing on the dark exciton in QDs with triplet character. Then we introduce the underlying energy transfer steps, starting from QD triplet photosensitization, triplet exciton transport, triplet-triplet annihilation, and ending with the upconverted emission. Design principles to improve the total upconversion efficiency are presented. We end with limitations in current reports and proposed future directions. This review provides a guide for designing efficient organic-QD upconversion platforms for future applications, including overcoming the Shockley-Queisser limit for more efficient solar energy conversion, NIR-based phototherapy, and diagnostics in vivo.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Quantum Mechanical Evaluation of CZTS Properties for Photovoltaic Applications
As a quaternary semiconductor, CZTS (Cu 2 ZnSnS 4 ) shows promise as a thin-film solar cell material. The constituent elements in CZTS are abundant and non-toxic, and CZTS has an ideal band gap (~1.5 eV) for solar cell applications, which produces a large absorption coefficient. Unfortunately, the low efficiencies and difficulties in synthesizing the desired crystallographic phase (kesterite) and the associated formation of antisite defects limit its deployment. Using theoretical and computational tools, we investigated these current limitations, explored strategies to resolve these issues, and developed design guidelines to improve the efficiency of CZTS-based sunlight absorbers. We first sought to understand the challenges associated with synthesizing the kesterite phase and proposed ways to favor kesterite growth, thus adding to the understanding of CZTS photovoltaics. We also analyzed the major limitations at the atomic scale lowering the efficiency of CZTS: the low open-circuit voltage (V oc ) and the short carrier lifetime, thus addressing the technical effectiveness of CZTS photovoltaics. We believe the latter is due to Shockley-Read-Hall (SRH) recombination centers associated with point defects. We also studied the electronic structure of interfaces and defects introducing such recombination centers, and explored doping strategies to reduce SRH recombination. Ultimately, these efforts will benefit the public by contributing to the development of cheap and efficient solar energy conversion technologies made from abundant, non-toxic materials.
14 SOLAR ENERGY↗
Surface Molecular Chemistry in Solar Fuel Research
Through this research, we aim to combine transition metal catalysts with light-absorbing semiconductors for use in efficient solar energy conversion. Upon receiving photogenerated electrons from the semiconductors, the transition metal catalysts could accelerate the reduction of carbon dioxide into energy-rich fuels. We have deposited cobalt complexes, including cobalt macrocycles and single cobalt catalysts, onto different semiconductors that demonstrated targeted activities in photochemical carbon dioxide reduction. The structures and catalytic mechanisms of the surface cobalt catalysts were investigated using advanced techniques, including X-ray absorption spectroscopy at DOE user facilities. Our research provides new strategies to enable effective coupling between molecularly defined catalytic sites with heterogeneous surfaces for converting solar energy into chemicals and fuels. Research results obtained through this project have been disseminated through journal publications and conference presentation. In addition, this project provided important interdisciplinary training opportunities for two postdoctoral scholars, four graduate researchers, and one high school student. It also allowed us to establish successful State-National Laboratory partnerships with Brookhaven National Lab and Argonne National Lab.
14 SOLAR ENERGY↗
On-Device Lead Detention for Perovskite Solar Cells
As the power conversion efficiency (PCE) of perovskite solar cells (PSCs) have reached above 25.5%, the commercialization of PSCs appears to be imminent due to its lower fabrication cost, simpler manufacturing processes, and larger processing area over Si-based solar cells that dominate the current photovoltaic (PV) market. While many efforts have focused on tackling the stability and scalability issues with promising advances, the potential lead (Pb) toxicity issue has remained a concern of PSCs. Unlike the metallic Pb, the Pb 2+ in perovskite generally exhibit high solubility in water. However, Pb 2+ has so far appeared to be a necessary component in all high-efficiency PSCs. Handful methods have been explored to mitigate the potential Pb2+ leaking issue, which can be generally categorized as physical encapsulation and our pioneering chemical absorption method, which was extended by others later. Since device damage is inevitable in outdoor conditions, physical encapsulation alone is not sufficient to mitigate the long-term risk of leakage of soluble Pb 2+ to the environment under severe weather conditions. As a result, the chemical absorption approach has recently attracted significant attention as a more effective solution to confine the potential lead leakage. Hence, it is of great value to develop durable and highly efficient Pb-absorbing components that can be conveniently mounted onto the standard PSC stack as an add-on accessory in line with the encapsulation of PSCs instead of modifying the standard device fabrication and/or device configuration.
14 SOLAR ENERGY↗
Final project report for Highly efficient solar water-splitting using 3D/2D hydrophobic perovskites with corrosion resistant barriers
This is the final project report for developing photoelectrochemical cells for producing H2 with a solar to hydrogen conversion efficiency >20% and long-duration stability.
08 HYDROGEN↗