Search NASA⌕ Search

SEARCH · Search NASA

Results for “source injection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Imaging systematics induced by galaxy subsample fluctuation: New systematics at second order

Imaging systematics refers to the inhomogeneous distribution of a galaxy sample caused by varying observing conditions and astrophysical foregrounds. Current mitigation methods correct the galaxy density fluctuations $n$ gal /$\bar{n}$ gal caused by imaging systematics assuming that all galaxies in a sample have the same $n$ gal /$\bar{n}$ gal . Under this assumption, the corrected sample cannot perfectly recover the true correlation function. Here, we name this effect subsample systematics. For a galaxy sample, even if its overall sample statistics [redshift distribution 𝑛⁡(𝑧), galaxy bias 𝑏⁡(𝑧)], are accurately measured, 𝑛⁡(𝑧), 𝑏⁡(𝑧) can still vary across the observed footprint. It makes the correlation function amplitude of galaxy clustering higher, while correlation functions for galaxy-galaxy lensing and cosmic shear do not have noticeable change. Such a combination could potentially degenerate with physical signals on small angular scales, such as the amplitude of galaxy clustering, the impact of neutrino mass on the matter power spectrum, etc. subsample systematics cannot be corrected using imaging systematics mitigation approaches that rely on the cross-correlation signal between imaging systematics maps and the observed galaxy density field. In this paper, we derive formulated expressions of subsample systematics, demonstrating its fundamental difference with other imaging systematics. We also provide several toy models to visualize this effect. Finally, we discuss a potential method to estimate and mitigate subsample systematics by forward modeling its behavior using synthetic source injection.

Kong, Hui [The Barcelona Institute of Science and ↗
DOE OSTI2019

Improved measurements of the β -decay response of liquid xenon with the LUX detector

Here, we report results from an extensive set of measurements of the β-decay response in liquid xenon. These measurements are derived from high-statistics calibration data from injected sources of both 3 H and 14 C in the LUX detector. The mean light-to-charge ratio is reported for 13 electric field values ranging from 43 to 491 V/cm, and for energies ranging from 1.5 to 145 keV.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Cosmic-ray transport and gamma-ray emission in M31

Here we study the possibility that an extended cosmic-ray leptonic and/or hadronic halo is at the origin of the large-scale gamma-ray emission detected from the Andromeda galaxy (M31). We consider a broad ensemble of nonhomogeneous diffusion scenarios and of cosmic-ray injection sources. We find that cosmic-ray electrons and protons could be, and very likely are, responsible for part, or all, of the gamma-ray emission from M31, including out to more than 100 kpc from the center of the galaxy. We also simulate possible emission from pulsars in M31 and consider the effect of regions of highly inefficient diffusion around cosmic-ray acceleration sites, as suggested by recent TeV halo observations with Cherenkov telescopes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2026

Dark Energy Survey year 6 results: Magnification modeling and its impact on galaxy clustering and galaxy-galaxy lensing cosmology

Gravitational lensing magnification alters the observed spatial distribution of galaxies and must be accounted for to prevent biases in cosmological probes of the large-scale structure. We investigate its effects on the Dark Energy Survey Year 6 galaxy clustering and galaxy-galaxy lensing analyses using the fiducial lens (position tracer) sample M ag L im++. Magnification bias is parameterized by a coefficient that describes the response of the number of selected objects per unlensed area element to a change in the lensing convergence. We quantify this coefficient using the BALROG synthetic source injection catalog to account for the complexity of the selection function, and compare these results with simplified estimates. The resulting values of the magnification coefficients for each redshift bin are [3.16 ± 0.08, 2.76 ± 0.21, 4.09 ± 0.15, 4.42 ± 0.16, 4.90 ± 0.29, 4.83 ± 0.25]. Relative to Year 3, this analysis provides more precise and accurate magnification bias estimates through a larger BALROG area and reweighting to better match the data properties. Here, the cosmological results are robust when tested against various magnification parameter prior choices and also when adding cross-clustering between lens redshift bins. Neglecting magnification, however, introduces significant systematic shifts: relative to the fiducial analysis with Gaussian priors centered on the BALROG -derived estimates, we observe shifts of 1.37σ in S 8 and -0.84σ in Ω m (with cosmic shear included: -0.61σ in S 8 and -0.71σ in Ω m ), in agreement with findings from simulated data, demonstrating that magnification must be modeled to avoid biases. Freeing the magnification bias in lens bin 2 leads to unphysical negative values, further justifying its exclusion from the fiducial Year 6 analysis.

Cosmological parameters↗
DOE OSTI2026

Robust Measurement of Stellar Streams around the Milky Way: Correcting Spatially Variable Observational Selection Effects in Optical Imaging Surveys

Observations of density variations in stellar streams are a promising probe of low-mass dark matter substructure in the Milky Way. However, survey systematics such as variations in seeing and sky brightness can also induce artificial fluctuations in the observed densities of known stellar streams. These variations arise because survey conditions affect both object detection and star–galaxy misclassification rates. To mitigate these effects, we use Balrog synthetic source injections in the Dark Energy Survey (DES) Y3 data to calculate detection rate variations and classification rates as functions of survey properties. We show that these rates are nearly separable with respect to survey properties and can be estimated with sufficient statistics from the synthetic catalogs. Applying these corrections reduces the standard deviation of relative detection rates across the DES footprint by a factor of 5, and our corrections significantly change the inferred linear density of the Phoenix stream when including faint objects. Additionally, for artificial streams with DES-like survey properties we are able to recover density power spectra with reduced bias. We also find that uncorrected power-spectrum results for Legacy Survey of Space and Time (LSST)-like data can be around 5 times more biased, highlighting the need for such corrections in future ground-based surveys.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1979

Stratospheric aerosols in the intertropical convergence zone, Panama Canal zone

To investigate whether injection sources of the stratospheric aerosol layer could be detected in the tropical stratosphere, an examination of the aerosol vertical and horizontal size distribution around the Intertropical Convergence Zone (ITCZ) at the Panama Canal Zone was performed during the summer of 1977. By comparing these data with similar measurements in temperate and polar regions, it was hoped to discover variations in particle size that would indicate whether a young aerosol is forming and entering the stratosphere at the ITCZ; where the aerosol matures; and finally, where it reenters the troposphere. The methods used in the investigations and the results obtained from the analyses are described.

Farlow, N. H.↗
NASA NTRS1985

DE-1 phase 3 extended mission data analysis of Dynamics Explorer retarding ion mass spectrometer flight data

Field-aligned motion of ionospheric ions at a low altitudes and different pitch angle distributions of ionospheric ions at high altitudes were studied. The objective is twofold: (1) to discover the degree to which observations made by Dynamics Explorer 1 (DE-1) and DE-2 agree when taken in the same ionospheric volume; (2) to understand the processes operating along a magnetic field tube connecting DE-1 and DE-2 that allow a reconciliation of the two data sets. A second investigation has two facets; to reconcile the observed occurrence of ionospheric ions at high altitudes with a point source injection in the ionosphere and subsequent E x B drift, and to reconcile the observed fluxes of ionospheric ions at high altitudes with the measured upward flux at low altitudes. An understanding of the effects of E x B drift molten on the dispersion of ionospheric ions is attained.

Source record↗
NASA NTRS1987

Titanium-doped sapphire laser research and design study

Three main topics were considered in this study: the fundamental laser parameters of titanium-doped sapphire, characterization of commercially grown material, and design of a tunable, narrow-linewidth laser. Fundamental parameters investigated included the gain cross section, upper-state lifetime as a function of temperature and the surface-damage threshold. Commercial material was found to vary widely in the level of absorption of the laser wavelength with the highest absorption in Czochralski-grown crystals. Several Yi:sapphire lasers were constructed, including a multimode laser with greater than 50mJ of output energy and a single-transverse-mode ring laser, whose spectral and temporal characteristics were completely characterized. A design for a narrow-linewidth (single-frequency) Ti:sapphire laser was developed, based on the results of the experimental work. The design involves the use of a single-frequency, quasi-cw master oscillator, employed as an injection source for a pulsed ring laser.

Moulton, Peter F.↗
NASA NTRS1986

Pulsed injection control of a titanium-doped sapphire laser

Injection control of a tunable Ti:sapphire laser using a narrow-bandwidth pulsed dye laser operating at a wavelength removed from the peak of the Ti:sapphire-laser gain curve is reported. The free-running Ti:sapphire laser had broadband laser emission from 750 to 790 nm. Injection at 727 nm resulted in essentially complete energy extraction at that wavelength in a 2.5-pm bandwidth matching the injection source.

Brockman, Philip↗
NASA NTRS1989

Impulsive acceleration and scatter-free transport of about 1 MeV per nucleon ions in (He-3)-rich solar particle events

Impulsive solar energetic particle (SEP) events are studied to: (1) describe a distinct class of SEP ion events observed in interplanetary space, and (2) test models of focused transport through detailed comparisons of numerical model prediction with the data. An attempt will also be made to describe the transport and scattering properties of the interplanetary medium during the times these events are observed and to derive source injection profiles in these events. ISEE 3 and Helios 1 magnetic field and plasma data are used to locate the approximate coronal connection points of the spacecraft to organize the particle anisotropy data and to constrain some free parameters in the modeling of flare events.

Mason, G. M.↗
NASA NTRS1990

The influence of Oort clouds on the mass and chemical balance of the interstellar medium

The contribution of stellar encounters and interstellar erosion to comet cloud mass injection to the ISM is calculated. It is shown that evaporative mass loss from passing stars and SNe results in an average Galactic mass injection rate of up to 10 to the -5th solar mass/yr if such clouds are frequent around solar-type stars. Cometary erosion by interstellar grains produces an injection rate of 10 to the -5th to 10 to the -4th solar mass/yr. An injection rate of 2 x 10 to the -5th solar mass/yr is calculated. Each of these rates could be increased by a factor of about 15 if the comet clouds contain a significant amount of smaller debris. It is concluded that the total mass injection rate of material to the ISM by comet clouds is small compared to other ISM mass injection sources. Comet cloud mass loss to the ISM could be responsible for a sizeable fraction of the metal and dust abundances of the ISM if Oort clouds are common.

Stern, S. Alan↗
NASA NTRS1991

22 W coherent GaAlAs amplifier array with 400 emitters

Greater than 22 W of optical power has been demonstrated from a multiple-emitter, traveling-wave semiconductor amplifier, with approximately 87 percent of the output at the frequency of the injection source. The device integrates, in AlGaAs graded-index separate-confinement heterostructure single quantum well (GRINSCH-SQW) epitaxy, 400 ridge waveguide amplifiers with a coherent optical signal distribution circuit on a 12 x 6 mm chip.

Krebs, D.↗
NASA NTRS1991

Load flows and faults considering dc current injections

The authors present novel methods for incorporating current injection sources into dc power flow computations and determining network fault currents when electronic devices limit fault currents. Combinations of current and voltage sources into a single network are considered in a general formulation. An example of relay coordination is presented. The present study is pertinent to the development of the Space Station Freedom electrical generation, transmission, and distribution system.

Kusic, G. L.↗
NASA NTRS1995

Phase lags in Cygnus X-1

Coronae of hot electrons are ubiquitous features in models of the inner regions of accreting black holes and nonmagnetic neutron stars. The scattering optical depth of these coronae inferred from observations is often tau approximately 3, so the energy spectrum of the disk in these regions is likely masked by the spectrum of upscattered photons in the corona and some of the disk properties are thus obscured. Observations of the dependence on not available with the energy spectrum. In our picture, the disk emission is modeled as a photon source injected into a Comptonizing corona; Comptonization may also occur in the disk, but for our purposes the disk emission is simply an input to the corona. We show that, contrary to some claims, the functional dependence of lag on Fourier frequency emerges intact from transit through the corona, modulo a multiplicative factor (which may in principle be negative, so that a phase lag can be changed to a phase lead), even if the properties of the corona vary with time. We also show that any frequency dependence of the lag due to variation in the corona itself is only second order in the amplitude of the variation, and cannot exceed the transit time approximately ms of the corona; thus, the lags of up to 0.1 s seen in several black hole candidates come from lags in the emission from the disk. Finally, we predict that plots of the time lag versus Fourier frequency in black hole candidates should have a 'shelf' of constant lag equal to the coronal lag (approximately 1 ms), with the constant being proportional to In (E(sub 2)/E(sub 1)) for the lag between energies E(sub 2) and E(sub 1). The lack of such a shelf in current observations of several galactic black hole candidates constraints the radii of the coronae to be R less than or approximately = 10(exp 8) tau cm.

Miller, M. Coleman↗
NASA NTRS1994

Kinetic and thermodynamic properties of a convecting plasma in a two-dimensional dipole field

Charged particle guiding center motion is considered in the magnetic field of a two-dimensional ('line') dipole on which is superimposed a small, static, perpendicular electric field. The parallel equation of motion is that of a simple harmonic oscillator for cos theta, the cosine of magnetic colatitude theta. Equations for the perpendicular electric and magnetic drifts are derived as well as their bounce-averaged forms. The latter are solved to yield a bounce-averaged guiding center trajectory, which is the same as that obtained from conversation of magnetic moment mu, longitudinal invariant J, and total (kinetic plus electrostatic) energy K. The algebraic simplicity of the trajectory equations is also manifest in the forms of the invariants. An interesting result is that guiding centers drift in such a way that they preserve the values of their equatorial pitch angles and (equivalently) mirror latitudes. The most general Maxwellian form of the equilibrium one-particle distribution function f is constructed from the invariants, and spatially varying density and pressure moments, parallel and perpendicular to the magnetic field, are identified. Much of the paper deals with the more restricted problem in which f is specified as a bi-Maxwellian over a straight line of finite length in the equatorial plane of the dipole and perpendicular to field lines. This might be thought of as specifying a cross-tail ion injection source; our formalism then describes the subsequent spatial development. The distribution away from the source is a scaled bi-Maxwellian but one that is cut off at large and small kinetic energies, which depend on position. Density and pressure components are reduced from the values they would have if the total content of individual flux tubes convected intact. The equatorial and meridional variations of density and pressure components are examined and compared systematically for the isotropic and highly anisotropic situations. There appears to be little qualitative difference due to anisotropy. An anisotropy measure is defined, and its spatial variation determined as a signature of possible MHD instability. Extreme values are found, larger than at the source, but the plasma beta in such regions is probably so low as to render the effect inconsequential energetically. Finally, the possible consequence of 'nonadia- batic' pressure profiles on electrostatic interchanges is considered, and a boundary delineating stabilizing and destabilizing regions determined.

Huang, T. S.↗
NASA NTRS1996

The Single Event Effect Characteristics of the 486-DX4 Microprocessor

This research describes the development of an experimental radiation testing environment to investigate the single event effect (SEE) susceptibility of the 486-DX4 microprocessor. SEE effects are caused by radiation particles that disrupt the logic state of an operating semiconductor, and include single event upsets (SEU) and single event latchup (SEL). The relevance of this work can be applied directly to digital devices that are used in spaceflight computer systems. The 486-DX4 is a powerful commercial microprocessor that is currently under consideration for use in several spaceflight systems. As part of its selection process, it must be rigorously tested to determine its overall reliability in the space environment, including its radiation susceptibility. The goal of this research is to experimentally test and characterize the single event effects of the 486-DX4 microprocessor using a cyclotron facility as the fault-injection source. The test philosophy is to focus on the "operational susceptibility," by executing real software and monitoring for errors while the device is under irradiation. This research encompasses both experimental and analytical techniques, and yields a characterization of the 486-DX4's behavior for different operating modes. Additionally, the test methodology can accommodate a wide range of digital devices, such as microprocessors, microcontrollers, ASICS, and memory modules, for future testing. The goals were achieved by testing with three heavy-ion species to provide different linear energy transfer rates, and a total of six microprocessor parts were tested from two different vendors. A consistent set of error modes were identified that indicate the manner in which the errors were detected in the processor. The upset cross-section curves were calculated for each error mode, and the SEU threshold and saturation levels were identified for each processor. Results show a distinct difference in the upset rate for different configurations of the on-chip cache, as well as proving that one vendor is superior to the other in terms of latchup susceptibility. Results from this testing were also used to provide a mean-time-between-failure estimate of the 486-DX4 operating in the radiation environment for the International Space Station.

Kouba, Coy↗
NASA NTRS1999

A Study of Mars Dust Environment Simulation at NASA Johnson Space Center Energy Systems Test Area Resource Conversion Test Facility

The dust environment on Mars is planned to be simulated in a 20 foot thermal-vacuum chamber at the Johnson Space Center, Energy Systems Test Area Resource Conversion Test Facility in Houston, Texas. This vacuum chamber will be used to perform tests and study the interactions between the dust in Martian air and ISPP hardware. This project is to research, theorize, quantify, and document the Mars dust/wind environment needed for the 20 foot simulation chamber. This simulation work is to support the safety, endurance, and cost reduction of the hardware for the future missions. The Martian dust environment conditions is discussed. Two issues of Martian dust, (1) Dust Contamination related hazards, and (2) Dust Charging caused electrical hazards, are of our interest. The different methods of dust particles measurement are given. The design trade off and feasibility were studied. A glass bell jar system is used to evaluate various concepts for the Mars dust/wind environment simulation. It was observed that the external dust source injection is the best method to introduce the dust into the simulation system. The dust concentration of 30 Mg/M3 should be employed for preparing for the worst possible Martian atmosphere condition in the future. Two approaches thermal-panel shroud for the hardware conditioning are discussed. It is suggested the wind tunnel approach be used to study the dust charging characteristics then to be apply to the close-system cyclone approach. For the operation cost reduction purpose, a dehumidified ambient air could be used to replace the expensive CO2 mixture for some tests.

Chen, Yuan-Liang Albert↗