Search NASA⌕ Search

SEARCH · Search NASA

Results for “spectral analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Leveraging hyperspectral phenotyping for accurate, non-destructive prediction of metabolite profiles in poplar under drought stress

Accurately predicting drought tolerance in woody perennial bioenergy crops is critical for sustainable biomass production under fluctuating precipitation. Hyperspectral imaging (HSI) in the visible-near-infrared (VNIR) and shortwave-infrared (SWIR) ranges offers a promising approach for predicting plant biochemical traits, yet its application in metabolite profiling remains underexplored. We integrated VNIR+SWIR HSI with untargeted metabolomics to investigate drought-induced metabolic shifts in Populus leaves from eight Populus genotypes. Metabolite profiling identified 127 compounds, with 73 showing significant drought responses spanning amino acids (AA), carbohydrates (CHO), phenolic glycosides (PG), organic acids (OA), fatty acids and alcohols (FA), terpenes (T), phenolic metabolites (P), and unclassified metabolites. Spectral analysis revealed consistently higher reflectance across VNIR and SWIR wavelengths in drought-stressed plants, corresponding with increased accumulation of AA and reduced CHO and PG levels. Least absolute shrinkage and selection operator (LASSO) regression modeling identified robust spectral predictors of metabolite concentrations, associating VNIR wavelengths (500–700 nm) predominantly with AA and P, whereas SWIR wavelengths (1680–1700 nm) reliably predicted CHO, OA, and T. Several stable spectral-metabolite associations persisted across the two watering regimes (drought vs. well-watered), highlighting their potential as spectral biomarkers for non-destructive stress monitoring. Minimal genotype-specific variation suggests that observed spectral and metabolic responses were driven primarily by environmental factors, likely reflecting limited genetic diversity among the commercial Populus genotypes examined. This work establishes VNIR+SWIR hyperspectral imaging as a powerful, non-destructive phenotyping tool for precision monitoring and targeted improvement of drought resilience in bioenergy crops.

Biochemical trait prediction↗

Acoustic Tomography of the Atmosphere: A Large-Eddy Simulation Sensitivity Study

Accurate measurement of atmospheric turbulent fluctuations is critical for understanding environmental dynamics and improving models in applications such as wind energy. Advanced remote sensing technologies are essential for capturing instantaneous velocity and temperature fluctuations. Acoustic tomography (AT) offers a promising approach that utilizes sound travel times between an array of transducers to reconstruct turbulence fields. This study presents a systematic evaluation of the time-dependent stochastic inversion (TDSI) algorithm for AT using synthetic travel-time measurements derived from large-eddy simulation (LES) fields under both neutral and convective atmospheric boundary-layer conditions. Unlike prior work that relied on field observations or idealized fields, the LES framework provides a ground-truth atmospheric state, enabling quantitative assessment of TDSI retrieval reliability, sensitivity to travel-time measurement noise, and dependence on covariance model parameters and temporal data integration. A detailed sensitivity analysis was conducted to determine the best-fit model parameters, identify the tolerance thresholds for parameter mismatch, and establish a maximum spatial resolution. The TDSI algorithm successfully reconstructed large-scale velocity and temperature fluctuations with root mean square errors ( RMSE s) below 0.35 m/s and 0.12 K, respectively. Spectral analysis established a maximum spatial resolution of approximately 1.4 m, and reconstructions remained robust for travel-time measurement uncertainties up to 0.002 s. These findings provide critical insights into the operational limits of TDSI and inform future applications of AT for atmospheric turbulence characterization and system design.

17 WIND ENERGY↗

Molecular Imaging of Microbially Induced Corrosion of Synthetic Archeological Glasses by a Rhizosphere Bacterium

Microbially induced corrosion (MIC) focuses on the degradation of solid materials, such as glass or metal. Soil microbes are often associated with the corrosion of foreign objects in the rhizosphere. Paenibacillus polymyxa SCE2, a facultative anaerobic bacterium in soil, is of the same genus as bacteria found near nuclear waste disposal sites. Time-of-flight secondary ion mass spectrometry (ToF-SIMS) was used for imaging surface changes induced by P. polymyxa SCE2 cultured on two synthetic glass coupons to represent natural analogs of materials that were studied in relation to the vitrification of nuclear waste. Multimodal imaging was used to verify bacterial coverage across the glass surface after long-term growth. ToF-SIMS spectral analysis showed detection of glass component ions, such as silicon oxide (m/z – 59.96 SiO 2 – ) and aluminum oxide (m/z – 101.95 Al 2 O 3 – ), and biofilm’s extracellular polymeric substance (EPS) components, such as pentadecanoic acid (m/z – 241.22 C 15 H 29 O 2 – ) and sterol lipids (m/z – 311.16 C 20 H 23 O 3 – ). ToF-SIMS spectral, imaging, and depth profiling analyses showed that the glass rich in silica and other light elements (“granite glass”) had more “corrosion related” peaks than the glass that was less silica-rich and contained more iron (“dike glass”). Furthermore, these surface and interface compositional and spatial differences observed in the mass spectra and imaging were attributed to bacterial metabolism and an electron transfer mechanism influenced by morphological and compositional differences between the two types of glasses. ToF-SIMS is effective in studying microbial effects, bringing new molecular insights into MIC in a broader context of materials degradation.

Amorphous materials↗

Infrared spectral signatures of interfacial water at TiO 2 –electrolyte interfaces from deep potential molecular dynamics

Vibrational spectroscopy is a powerful tool for probing water at oxide–electrolyte interfaces, but its molecular interpretation can be challenging. Here, we employ deep potential long-range molecular dynamics simulations with layer-resolved spectral analysis to investigate the microscopic origins of the infrared (IR) response of water at the interface with anatase TiO 2 (101), a prototypical oxide surface. The calculated interfacial spectra exhibit characteristic modifications compared to bulk water IR spectra, including enhanced intensities, a red shifted and broadened stretching band, and a higher-frequency shoulder, in qualitative agreement with experiments. Spectral decomposition shows that these signatures originate mainly from the first interfacial water layer, dominated by surface-bound H 2 O at Ti 5C sites, with secondary contributions from the second layer. A moderate salt concentration (0.4 M NaCl) leaves both the interfacial structure and the spectra essentially unchanged, while tuning the pH strongly modulates the spectral intensity. We establish a scaling relation linking the spectral intensity to the surface water dissociation fraction and the dipole moment, both governed by interfacial electric fields. These findings provide a microscopic framework for interpreting IR spectra of oxide–electrolyte interfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Time series methods for the analysis of soundscapes and other cyclical ecological data

Biodiversity monitoring has entered an era of ‘big data’, exemplified by a near-continuous collection of sounds, images, chemical and other signals from organisms in diverse ecosystems. Such data streams have the potential to help identify new threats, assess the effectiveness of conservation interventions, as well as generate new ecological insights. However, appropriate analytical methods are often still missing, particularly with respect to characterizing cyclical temporal patterns. Here, we present a framework for characterizing and analysing ecological responses that represent nonstationary, complex temporal patterns and demonstrate the value of using Fourier transforms to decorrelate continuous data points. In our example, we use a framework based on three approaches (spectral analysis, magnitude squared coherence, and principal component analysis) to characterize differences in tropical forest soundscapes within and across sites and seasons in Gabon. By reconstructing the underlying, cyclic behaviour of the soundscape for each site, we show how one can identify circadian patterns in acoustic activity. Soundscapes in the dry season had a complex diel cycle, requiring multiple harmonics to represent daily variation, while in the wet season there was less variance attributable to the daily cyclic patterns. Our framework can be applied to most continuous, or near-continuous ecological data collected at a fine temporal resolution, allowing ecologists to explore patterns of temporal autocorrelation at multiple levels for biologically meaningful trends. Such methods will become indispensable as biological big data are used to understand the impact of anthropogenic pressures on biodiversity and to inform efforts to mitigate them.

54 ENVIRONMENTAL SCIENCES↗

The OCEAN ICE mooring compilation: a standardised, pan-Antarctic database of ocean hydrography and current time series

Continuous moored time series of temperature, salinity, pressure and current speed and direction are of great importance for understanding the continental shelf and under-ice-shelf dynamics and thermodynamics that govern water mass transformations and ice melting in and around Antarctic marginal seas. In these regions, icebergs and sea ice make ship-based mooring deployment and recovery challenging. Nevertheless, over decades, expeditions around the fringe of Antarctica sporadically deployed and recovered hundreds of moored instruments, including those facilitated through ice shelves boreholes. These datasets tend to be archived in a wide range of data centres, with, to our knowledge, no clear format standardisation. As a result, systematic analysis of historical mooring time series in the marginal seas is often challenging. Here we present the first version of a standardised pan-Antarctic moored hydrography and current time series compilation, with broad international contributions from data centres, research institutes and individual data owners. The mooring records in this compilation span over five decades, from the 1970s to the 2020s, providing an opportunity for a systematic study of the pan-Antarctic water mass transport and shelf connectivity. As a demonstration of the utility of this compilation, we present spectral analysis of the compiled current velocity time series, which unsurprisingly shows the dominating presence of tidal variability within most records. This component of the variability is fitted using multi-linear regression to tidal frequencies, and the tidal fit is removed from the original time series to leave de-tided variability. Given the limited record durations to months to years, de-tided variability is dominated by synoptic (3–10 d period), intraseasonal (10–80 d) and seasonal (∼6 months–1 year) signals. The spatial distribution of the kinetic energy integrated within frequency bands is presented and discussed within respective regional contexts, and future avenues of research are proposed. This data compilation is assembled under the endorsement of Ocean-Cryosphere Exchanges in ANtarctica: Impacts on Climate and the Earth System (OCEAN ICE) project (https://ocean-ice.eu/, last access: 23 October 2025) funded by the European Commission and UK Research and Innovation. It is available and regularly updated in NetCDF format with the SEANOE database at https://doi.org/10.17882/99922 (Zhou et al., 2024a).

54 ENVIRONMENTAL SCIENCES↗

Micropinch formation dynamics in X pinches

High temporal resolution x-ray streak camera studies of micropinch formation in Cu hybrid x pinches reveal key plasma conditions. Analysis of Ne-like Cu lines indicate an average electron temperature of about 200 eV and 4.5×10 28 m -3 electron density. Here, the spectra suggest that the electron temperature jumps to about 1 keV, inferred from the continuum and the postcontinuum line emission that includes Li-like Cu lines. There is no sign of a rapid temperature change or a substantial surge in radiation emission during the 200 ps precontinuum x-ray burst, suggesting that the radiative collapse process does not play a major role in micropinch formation. Two-dimensional extended Magnetohydrodynamic (MHD) simulations, coupled to a collisional-radiative spectral analysis code, suggest the significance of the rapid radial implosion of high-temperature, low-density plasma, the axial outflow, and the dynamic plasma pressure in micropinch formation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Filling data analysis gaps in time-resolved crystallography by machine learning

There is a growing understanding of the structural dynamics of biological molecules fueled by x-ray crystallography experiments. Time-resolved serial femtosecond crystallography (TR-SFX) with x-ray Free Electron Lasers allows the measurement of ultrafast structural changes in proteins. Nevertheless, this technique comes with some limitations. One major challenge is the quality of data from TR-SFX measurements, which often faces issues like data sparsity, partial recording of Bragg reflections, timing errors, and pixel noise. To overcome these difficulties, conventionally, large volumes of data are collected and grouped into a few temporal bins. The data in each bin are then averaged and paired with the mean of their corresponding jittered timestamps. This procedure provides one structure per bin, resulting in a limited number of averaged structures for the entire time interval spanned by the experiment. Therefore, the information on ultrafast structural dynamics at high temporal resolution is lost. This has initiated research for advanced methods of analyzing experimental TR-SFX data beyond the standard binning and averaging method. To address this problem, we use a machine learning algorithm called Nonlinear Laplacian Spectral Analysis (NLSA), which has emerged as a promising technique for studying the dynamics of complex systems. In this work, we demonstrate the power of this algorithm using synthetic x-ray diffraction snapshots from a protein with significant data incompleteness, timing uncertainties, and noise. Our study confirms that NLSA is a suitable approach that effectively mitigates the effects of these artifacts in TR-SFX data and recovers accurate structural dynamics information hidden in such data.

Trujillo, Justin (ORCID:0000000285505360)↗

Performance Prediction of High‐Entropy Perovskites La 0.8 Sr 0.2 Mn x Co y Fe z O 3 with Automated High‐Throughput Characterization of Combinatorial Libraries and Machine Learning

Perovskite oxides form a large family of materials with applications across various fields, owing to their structural and chemical flexibility. Efficient exploration of this extensive compositional space is now achievable through automated high-throughput experimentation combined with machine learning. In this study, we investigate the composition–structure–performance relationships of high-entropy La 0.8 Sr 0.2 Mn x Co y Fe z O 3±𝞭 perovskite oxides (0 < x, y, z <1; x+y+z≈1) for application as oxygen electrodes in Solid Oxide Cells. Following the deposition of a continuous compositional map using thin-film combinatorial pulsed laser deposition, compositional, structural, and performance properties are characterized using six different techniques with mapping capabilities. Random forests effectively model electrochemical performance, consistently identifying Fe-rich oxides as optimal compounds with the lowest area-specific resistance values for oxygen electrodes at 700 °C. Additionally, the models identify a statistical correlation between oxygen sublattice distortion—derived from spectral analysis of Raman-active modes—and enhanced performance.

high entropy oxides↗

Analyzing LF/VLF Lightning Waveforms to Estimate D-region Electron Density Profiles

Lightning waveforms in the low frequency (LF; 30-300 kHz) and the very low frequency (VLF; 3-30 kHz) bands can be exploited to produce data-driven ionospheric D-region electron density profile (EDP) estimates with significantly higher spatial and temporal coverage than previously available. The lightning waveforms used in this paper are signals detected in the LF/VLF of negative cloud-to-ground lightning by the Earth Networks Total Lightning Detection Network. Each waveform contains a ground wave and a time-delayed ionospheric reflection. The time delay between the ground wave and ionospheric reflection has previously been used to estimate a single specular reflection altitude, where LF/VLF emissions are reflected by the ionosphere. Here, we expand upon previous methods to include filtering and spectral analysis, and account for oblique propagation to produce higher-order estimates for reflection altitudes and corresponding electron densities. Once estimated, reflection altitudes and corresponding electron densities can be used to derive parameters β and h’, which define an EDP for the D-region. In this study, the lightning waveform (LW) analysis is demonstrated using a single representative 24-hour dataset over the Southeast United States, and then extended to a total of 10 separate datasets with varying locations and ionospheric conditions. The LW-derived D-region EDPs are in agreement with predictions made by the Faraday International Reference Ionosphere model, and the LW EDPs β and h’ values are consistent with previous LF/VLF-derived estimates.

D-region ionosphere↗

Entropy-defect synergy for dual luminescence mechanism in spinel: Time-resolved anti-counterfeiting and fingerprint visualization

Multimodal luminescent materials, while promising for anti-counterfeiting, often lack dynamic time-dependent responses and controllable spatial distribution, limiting their encryption capabilities in the spatiotemporal dimension. Here, this work presents a coordinated control strategy based on entropy and defect engineering, and uses a backpropagation (BP) neural network for material screening to successfully prepare spinel Mg 0.8 (Fe 0.04 Co 0.04 Ni 0.04 Cu 0.04 Zn 0.04 )Cr 2 O 4 (MgA 5 CO) phosphors with time-dependent dynamic luminescence behavior. This phosphor simultaneously activated the d-d transition luminescence (∼618 nm) derived from Co 2+ /Cr 3+ and the defect luminescence (∼398 nm) related to zinc vacancies (V Zn ) in a single-phase solid solution. The phosphor exhibits a time-dependent color evolution from pink to purple under fixed-wavelength excitation, due to the different excited-state dynamics and decay lifetimes associated with the d-d transition and defect luminescence. Structural characterization and spectral analysis confirmed the existence of V Zn and its significant role in defect luminescence process. The fluorescent and dynamic luminescent properties of entropy-based spinel oxide enable its use in advanced anti-counterfeiting applications like fingerprint recognition and color-changing dedicated anti-counterfeiting mark, showing promise in high-end and time-dynamic anti-counterfeiting fields. This research not only developed a new type of fluorescent dynamic anti-counterfeiting material, but also provided a new idea for constructing advanced optical functional materials with multiple luminescence mechanisms.

Defect project↗

A cobalamin-dependent pathway of choline demethylation from the human gut acetogen Eubacterium limosum

Elevated serum levels of trimethylamine N-oxide (TMAO) are reported to promote the development of atherosclerosis. TMAO is produced by hepatic oxidation of trimethylamine (TMA) produced by the gut microbiome from dietary quaternary amines such as choline. Net TMA production in the gut depends on microbial enzymes that either produce or consume TMA and its precursors. Here we report the elucidation of a novel microbial pathway consuming choline without TMA production. The human gut acetogen Eubacterium limosum grows by demethylating choline to N-N-dimethylaminoethanol. Quantitative mass spectral analysis of the proteome revealed a multi-protein choline to tetrahydrofolate (THF) methyltransferase system present only in choline-grown cells. The components are encoded in a gene cluster on the genome and include MthB, an MttB superfamily member; MthC, homologous to methylotrophic cobalamin-binding proteins; MthA, homologous to cobalamin:THF methyltransferases; and MthK, a protein related to serine kinases. Together, MthB, MthC, and MthA methylate THF with phosphocholine, but not choline or other quaternary amines. MthB specifically methylates Co(I)-MthC with phosphocholine. MthK acts as a bifunctional choline kinase which can utilize ATP or the MthB demethylation product, N,N-dimethylaminoethanol phosphate, to phosphorylate choline. Together, MthK, MthB, MthC, and MthA are proposed to carry out the methylation of THF with choline. These results outline a THF methylation pathway in which choline is first activated with ATP to phosphocholine prior to demethylation to form N,N-dimethylaminoethanol phosphate. Furthermore, the latter can be recycled by MthK to form more phosphocholine without expending additional ATP, thus minimizing energy utilization during choline-dependent acetogenesis.

acetogenesis↗

Investigating ultrafine aerosol turbulent fluxes during atmospheric new particle formation events

New particle formation (NPF) is an important source of atmospheric aerosols, yet quantitatively predicting its occurrence remains challenging, partly because ground-based measurements cannot capture NPF accurately if they occur in the upper atmosphere. While observations have confirmed the presence of new particles near the top of the planetary boundary layer (PBL), their origins and the direction of their vertical transport have remained ambiguous. Here, we propose and validate an analytical framework using airborne eddy-covariance (EC) and continuous wavelet transform (CWT) to directly quantify the vertical flux of newly formed particles and determine its dominant vertical transportation direction. Analyzing data from a dedicated airborne campaign over the Southern Great Plains, we observed a persistent and strong downward particle flux during NPF events, with a mean value of 133.8 cm?3 m s?¹ downward flux in the entrainment zone, whereas fluxes on non-NPF days were negligible. Our spectral analysis further confirms that these directional fluxes can be reliably captured using standard 1 Hz aerosol instrumentation. These findings suggest that new particle formation, driven by the entrainment of air from the overlying residual/stable layer during PBL growth, is a significant and potentially understudied source of boundary layer aerosols. The framework presented here provides a methodology to correctly attribute NPF events to specific altitudes, thereby improving the mechanistic understanding required for accurate atmospheric models.

Zhang, Ruoyu↗

When Photoelectrons Meet Gas Molecules: Determining the Role of Inelastic Scattering in Ambient Pressure X-ray Photoelectron Spectroscopy

Inelastic photoelectron scattering (IPES) by gas molecules, a critical phenomenon observed in ambient pressure X-ray photoelectron spectroscopy (APXPS), complicates spectral interpretation due to kinetic energy loss in the primary spectrum and the appearance of additional features at higher binding energies. In this study, we systematically investigate IPES in various gas environments using APXPS, providing detailed insights into interactions between photoelectrons emitted from solid surfaces and surrounding gas molecules. Corelevel XPS spectra of Au, Ag, Zn, and Cu metals were recorded over a wide kinetic energy range in the presence of CO 2 , N 2 , Ar, and H 2 gases, demonstrating the universal nature of IPES across different systems. Additionally, we analyzed spectra of scattering effects induced by gas-phase interactions without metal solids. In two reported CO 2 -reduction systems (p-GaN/ Au/Cu and p-Si/TaO x /Cu), we elucidated that IPES is independent of the composition, structure, or size of the solid materials. Using metal foil platforms, we further developed an analytical model to extract electron excitation cross sections of gas molecules. These findings enhance our understanding of IPES mechanisms and enable the predictions of IPES structures in other solid–gas systems, providing a valuable reference for future APXPS studies and improving the accuracy of spectral analysis in gas-rich catalytic interfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mechanisms and Energetics of CO 2 Chemisorption in Choline-Based Eutectic Solvents

Understanding the influences of proton sharing and hydrogen transfer in amine and hydroxyl functionalized eutectic solvents is important for tuning CO 2 binding as they relate to the chemisorption capacity and energetics of solvent regeneration in carbon capture. In this study, we examine how the CO 2 binding mechanism and energetics vary in eutectic solvents composed of choline-based hydrogen-bond acceptors (HBAs) with amine and hydroxyl moieties and ethylene glycol (EG), propylene glycol (PG), 1,2-butanediol (BD), and monoethanolamine (MEA)-type hydrogen-bond donors (HBDs), through absorption–desorption experiments and spectral analysis, supported with density functional theory (DFT) calculations. While the HBD-CO 2 complex is the major and the thermodynamically more favored product of absorption in all of the examined eutectic solvents, this complexation is only possible proceeding a proton transfer from HBD to the HBA in diol-based systems (EG, PG, BD). The interplay between HBA-CO 2 and HBD-CO 2 speciation is governed by the HBD concentration, basicity, and steric effects, with increased HBD-CO 2 interactions in the presence of smaller HBDs (size: BD > PG > EG). On the other hand, in MEA-based systems, CO 2 readily binds to the amine followed by a proton transfer from the amine to the HBA as confirmed by DFT calculations. In this way, the MEA-CO 2 chemisorption capacities exceeded that of the conventional amine (up to 0.93 mol of CO 2 per mol of MEA versus 0.5). Furthermore, the increase in CO 2 capacities and enhanced binding in eutectics including MEA or the more basic HBAs also resulted in regeneration temperatures of 70 to 60 °C with calculated reaction energies of −82 to −57 kJ/mol, compared to 50 °C for others with weaker binding, following CO 2 absorption at 25 °C.

absorption↗

Gamma Radiation Effects in Amorphous and Crystalline Polyaryletherketones

This work investigates the effect of gamma radiation on chain scission and crosslinking in polyaryletherketone (PAEK) thermoplastic filaments, namely, polyetheretherketone (PEEK) and polyetherketoneketone (PEKK) that is either semicrystalline (PEKK-c) or highly amorphous (PEKK-a). The PAEK thermoplastic filaments were exposed to total ionizing doses (TID) of gamma radiation from 1 to 8 MGy in the Gamma Irradiation Facility at Sandia National Laboratories. A combination of thermal and FT-IR spectral analysis of the irradiated specimens was used to study the chain scission and crosslinking behavior between PEEK, PEKK-c, and PEKK-a. Crystallinity decreased with increased TID and melt enthalpy decreased. Despite clear indications of changes to melt and crystallization behavior, any change to the glass-transition temperature was minor until a post-irradiation thermal annealing occurred, which caused an increase in crystallinity. Gamma radiation impacted PEKK-a more due to the lower degree of initial crystallinity, where a reduction in melt enthalpy, crystallinity, and crystallization kinetics was observed. Despite these effects, the ability to achieve a higher degree of crystallization (X c < 20%) by annealing was not affected. The results presented here provide important insight into the performance of a class of commercialized PEKK thermoplastics exposed to a harsh radiation environment.

Crystallinity↗

Electrically interfaced Brillouin-active waveguide for microwave photonic measurements

New strategies for converting signals between optical and microwave domains could play a pivotal role in advancing both classical and quantum technologies. Traditional approaches to optical-to-microwave transduction typically perturb or destroy the information encoded on intensity of the light field, eliminating the possibility for further processing or distribution of these signals. In this paper, we introduce an optical-to-microwave conversion method that allows for both detection and spectral analysis of microwave photonic signals without degradation of their information content. This functionality is demonstrated using an optomechanical waveguide integrated with a piezoelectric transducer. Efficient electromechanical and optomechanical coupling within this system permits bidirectional optical-to-microwave conversion with a quantum efficiency of up to -54.16 dB. Leveraging the preservation of the optical field envelope in intramodal Brillouin scattering, we demonstrate a multi-channel microwave photonic filter by transmitting an optical signal through a series of electro-optomechanical waveguide segments, each with distinct resonance frequencies. Such electro-optomechanical systems could offer flexible strategies for remote sensing, channelization, and spectrum analysis in microwave photonics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Early photometric and spectroscopic observations of the extraordinarily bright INTEGRAL-detected GRB 221009A

Context. GRB 221009A, initially detected as an X-ray transient by Swift, was later revealed to have triggered the Fermi satellite about an hour earlier, marking it as a post-peak observation of the event’s emission. This GRB distinguished itself as the brightest ever recorded, presenting an unparalleled opportunity to probe the complexities of GRB physics. The unprecedented brightness, however, challenged observation efforts, as it led to the saturation of several high-energy instruments.Aims. Our study seeks to investigate the nature of the INTEGRAL-detected GRB 221009A and elucidate the environmental conditions conducive to these exceptionally powerful bursts. Moreover, we aim to understand the fundamental physics illuminated by the detection of teraelectronvolt (TeV) photons emitted by GRB 221009A.Methods. We conducted detailed analyses of early photometric and spectroscopic observations that span from the Fermi trigger through to the initial days following the prompt emission phase in order to characterize GRB 221009A’s afterglow, and we complemented these analyses with a comparative study.Results. Our findings from analyzing INTEGRAL data confirm GRB 221009A as the most energetic event observed to date. Early optical observations during the prompt phase negate the presence of bright optical emissions with internal or external shock origins. Spectroscopic analyses enabled us to measure GRB 221009A’s distance and line-of-sight properties. The afterglow’s temporal and spectral analysis suggests prolonged activity of the central engine and a transition in the circumburst medium’s density. Finally, we discuss the implications for fundamental physics of detecting photons as energetic as 18 TeV from GRB 221009A.Conclusions. Early optical observations have proven invaluable for distinguishing between the potential origins of optical emissions in GRB 221009A, underscoring their utility in GRB physics studies. However, the rarity of such data underscores the need for dedicated telescopes capable of synchronous multiwavelength observations. Additionally, our analysis suggests that the host galaxies of TeV GRBs share commonalities with those of long and short GRBs. Expanding the sample of TeV GRBs could further solidify these findings.Key words: techniques: photometric / techniques: spectroscopic / gamma-ray burst: general / gamma-ray burst: individual: GRB 221009A

79 ASTRONOMY AND ASTROPHYSICS↗