SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The design and characteristics of a high resolution, digital solar spectrograph are discussed. The spectrometer operates in the 10 to 80 MHz range. The primary considerations in the design of the spectrograph were: (1) optimun sensitivity, (2) wide dynamic range, (3) flexibility in time and frequency resolution, and (4) modern data handling techniques with a simple computer interface.
High-resolution observations of a class-3N two-ribbon flare were conducted at 1324 UT on July 29, 1973, at Big Bear Solar Observatory. The flare occurred in a diffuse bipolar magnetic region completely devoid of sunspots and was associated with a type IV radio burst and a soft X-ray event. Extensive H alpha filtergraph, spectrograph and magnetograph records taken during the main phase of the flare suggest the presence of downfalling and streaming materials for several hours on both ribbons during the growth phase of H alpha emission. Hyder's infall-impact model (1967) is found to be inconsistent with the authors' filtergraph and spectrograph observations.
The high resolution spectrograph (HRS) is designed to be used with the Large Space Telescope (LST) for the study of spectra of point and extended targets in the spectral range 110 to 410 nm. It has spectral resolutions of 1,000; 30,000; and 100,000 and has a field of view as large as 10 arc sec. The spectral range and resolution are selectable using interchangeable optical components and an echelle spectrograph is used to display a cross dispersed spectrum on the photocathode of either of 2 SEC orthicon image tubes. Provisions are included for wavelength calibration, target identification and acquisition and thermal control. The system considerations of the instrument are described.
The convex curved crystal X-ray spectrograph has recently seen increasing use for the spectral analysis of transient plasmas. The present paper describes the calculation of ray paths through the spectrograph for both localized and extended sources. The method traces a ray from any given source point to its point of diffraction by the curved crystal and then to the imaging circle, where the image point is obtained. Application of the ray tracing method is made to some actual experimental configurations to obtain resolution values and source sizes. Wavelength calibrations are obtainable with the ray tracing method in advance of instrument construction.
The horizontal foci of a Tandem Wadsworth spectrograph are calculated by using the correct ruling densities for both gratings. Results are quite different from those of previous analyses that used approximate ruling densities. Ray tracings confirm the analyses with the correct ruling densities and also indicate that this spectrograph possesses the excellent, nearly stigmatic properties found by the approximate analyses.
A dual star-tracking system and a system including a telescope, an echelle spectrograph, and a SEC vidicon are the chief components of the Balloon-borne Ultraviolet Stellar Spectrograph (BUSS), which has flown four successful missions. The BUSS missions have yielded 81 spectra for 56 stars, recorded with a resolution of 0.1 A in the wavelength range from 2200 to 3400 A. BUSS observations include: profiles of Mg II lines indicating considerable mass flow in early-type supergiants; Mg II features suggesting a cool expanding outer shell above a hotter chromosphere; emission features in Zeta Tau (a shell star) indicating infalling material; and emission features of the Be star Phi Per suggesting mass outflow.
A Cassegrain spectrograph used in conjunction with an image-tube, image-dissector scanner (ITS) is discussed with reference to its design features and operation. The spectrograph has a remote control feature, and its parameters, such as slit width, decker position, filter selection, focus, and grating selection, can be easily changed by computer command or a hard-wired control box. The discussion also includes the area scanner modification which allows raster scanning and limited picture taking. Finally, the design of a two-channel polarization analyzer is presented which allows simultaneous sky and sky-plus-star observations and faint-object polarimetry.
An instrument has been built to obtain simultaneous spectra of many objects in the field of view of the Steward 90 inch (2.29 m) telescope. Short lengths of fused silica fiber 300 microns in diameter are used to bring the light from galaxy images at the Cassegrain focus into a line along the spectrograph slit. From a single exposure of the cluster Abell 1904, which has a redshift of 20,000 km/s, the redshifts of 26 individual galaxies were determined, each with a precision of 100 km/s. The present device, while already giving a sixfold reduction in the mean telescope time per galaxy, has significant light losses because it is not ideally matched to the telescope. An instrument being designed for the prime focus will transmit light from each object as efficiently as a conventional spectrograph.
Examples of scientific observing programs planned with the Faint Object Spectrograph on Space Telescope are presented. An overview of the spectrograph design and operation is presented. The expected astronomical performance of the instrument is described in some detail.
The Faint-Object Spectrograph (FOS) is one of five scientific instruments under development for use with the Optical Telescope Assembly (OTA) of NASA's Space Telescope. It is a dual-channel spectrograph operating with two independent 512-channel pulse-counting Digicons. The FOS will be employed in connection with the study of scientific questions associated with quasars, active galaxies, normal distant and local group galaxies, a wide class of objects within the Milky Way Galaxy and neighboring galaxies, and objects within the solar system. The FOS contains an optical bench which supports all optical elements. Dimensional stability was the primary design requirement for the optical bench. This led to the selection of a graphite/epoxy structure using laminates with very low coefficients of thermal expansion and high stiffness. The technical requirements are considered and details of fabrication are discussed.
An aberration theory is applied to spectrograph design. The initial system considered has a toroidal mirror in front of a concave grating spectrograph, giving spatial resolution perpendicular to the dispersion direction. The accuracy of the theory is shown by comparison of spot diagrams obtained from the aberrations with those produced by raytracing. The major aberrations affecting the vignetting at the intermediate slit and the spatial resolution are identified. A new system, using a holographic grating to give a flat focal plane, is then designed and optimized. It has increased spatial resolution over the wavelength range and is particularly suitable for microchannel array detectors.
A high efficiency spectrograph design for the EUV and soft X rays is presented. This grazing incidence system uses a plane surface reflection grating with rulings that are radial, like the spokes of a wheel. The grating is placed in a beam of light that is converging to a focus. The single reflection off the grating is in the conical diffraction mount ensuring maximum performance from the system. Aberrations and performance levels are discussed. The gratings can be manufactured with existing ruling engines. Sample applications to an X-ray monochromator and an EUV stellar spectrograph are discussed.
The major objectives of the high resolution telescope and spectrograph (HRTS) are: (1) the investigation of the energy balance and mass balance of the temperature minimum, chromosphere, transition zone, and corona in quiet regions on the Sun as well as in plages, flares, and sunspots; (2) the investigation of the velocity field of the lower corona to study the origin of the solar wind; (3) the investigation of preflare and flare phenomena. The HRTS instruments consists of a telescope, an ultraviolet spectrograph, and ultraviolet spectroheliograph, and an H alpha slit display system, all housed in a thermal control canister mounted on an instrument pointing system.
The Sayan cosmic ray (CR) spectrograph recorded an SCR flare that occurred on 16 February 1984. Data from both 1-hour and 110-minute duration measurements in 10 channels with different energy sensitivity (of neutron monitors HM-64 located at different depths in the atmosphere, and of a neutron, multiple neutron and rigid mumeson component lead-less detector) is presented. The parameters of the SCR variation spectrum are evaluated and it is shown that the recording of multiple neutrons at the same geographic point and at the same level in the atmosphere provides information similar to that from a spectrographic complex of instruments.
The major objectives of the high resolution telescope and spectrograph (HRTS) are: (1) the investigation of the energy balance and mass balance of the temperature minimum, chromosphere, transition zone, and corona in quiet regions on the Sun as well as in plages, flares, and sunspots; (2) the investigation of the velocity field of the lower corona to study the origin of the solar wind; and (3) the investigation of preflare and flare phenomena. The HRTS instruments consists of a telescope, an ultraviolet spectrograph, an ultraviolet spectroheliograph, and an H alpha slit display system, all housed in a thermal control cannister mounted on an instrument pointing system.
A (256 x 1024)-pixel imaging ultraviolet Multi-mode Microchannel Array (MAMA) detector system for flight was fabricated, evaluated, and environmentally tested for flight on the Balloon Borne Ultraviolet Stellar Spectrograph (BUSS). The goal of the program was to replace the existing SEC Vidicon with the pulse-counting MAMA detector in order to, first, improve the overall sensitivity of the BUSS telescope and spectrograph for observations of stars down to m sub v = 7 and fainter, and, second, to improve the spectral resolution and wavelength accuracy by eliminating the image drifts in the Vidicon caused by magnetic field effects. A sealed MAMA detector tube structure employing a remotely processed photocathode mounted on a window in proximity focus with the front face of the MCP was developed to avoid contamination produced by a noisy and unstable device. The configuration of the BUSS detector system in its flight ready configuration is shown. The quantum efficiency curve for the semi-transparent Cs2Te photocathode is also shown.
A method for mapping, to first order, the spectrograms that result from echelle spectrographic systems is discussed. An in-depth description of the principles behind the method are given so that software may be generated. Such software is an invaluable echelle spectrograph design aid. Results from two applications are discussed.
A grazing incidence X-ray spectrograph for investigating the spectra of cosmic X-ray sources is described. The overall instrument design is reviewed, and the key components of the spectrograph, including the gratings, telescope, and detector, are examined. Preliminary performance measurements are reported and plans for the instrument are addressed.