Search NASA⌕ Search

SEARCH · Search NASA

Results for “static structure factor”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Large-𝑁 SU(4) Schwinger boson theory for coupled-dimer antiferromagnets

Here, we develop a systematic large-𝑁 expansion based on the Schwinger boson representation of SU(4) coherent states of dimers for the paradigmatic spin-1/2 bilayer square lattice Heisenberg antiferromagnet. This system exhibits a quantum phase transition between a quantum paramagnetic state and a Néel order state, driven by the coupling constant 𝑔 = 𝐽′/𝐽, which is defined as the ratio between the interdimer 𝐽′ and intradimer 𝐽 exchange interactions. We demonstrate that this approach accurately describes static and dynamic properties on both sides of the quantum phase transition. The critical coupling constant 𝑔 𝑐 ≈ 0.42 and the dynamic spin structure factor reproduce quantum Monte Carlo results with high precision. Notably, the 1/𝑁 corrections reveal the longitudinal mode of the magnetically ordered phase along with the overdamping caused by its decay into the two-magnon continuum. The present large-𝑁 SU(4) Schwinger boson theory can be extended to more general cases of quantum paramagnets that undergo a quantum phase transition into magnetically ordered states.

Schwinger boson method↗

Direct Simulations of H–He Mixtures at Planetary Interior Conditions: Demixing, Insulator–Metal Transition and Miscibility Boundaries

Accurate knowledge of the electrical and thermal conductivities and structural properties of hydrogen–helium mixtures under thermodynamic conditions within and beyond the immiscibility range is very important to predict the thermal evolution and internal structure of gas giant planets like Jupiter and Saturn. Here, we propose a novel method to determine the immiscibility boundary accurately without the need for free energy calculations, while providing consistent insights into structural and transport properties of mixtures. We show with direct large-scale ab initio simulations that the insulator–metal transition (IMT) of the hydrogen subsystem is strongly affected by an admixture with a small fraction of helium and occurs at temperatures significantly higher than those of pure hydrogen. At pressures below 150 GPa, the IMT boundary is not related anymore to the H 2 subsystem dissociation, the system remains insulating even after the full dissociation of H 2 molecules and its transition to an H–He mixture. The offset of the IMT in the H–He mixture relative to the dissociation region in the hydrogen subsystem and the significant reduction of static electrical and thermal conductivity by a factor between two and a few thousand relative to pure hydrogen found in mixtures have consequences for Jupiter and Saturn’s thermal evolution, internal structure, and dynamo action, affecting a large fraction of the interior of both planets.

Helium↗

Efficient First-Principles Methodology for the Calculation of the All-Phonon Inelastic Scattering in Solids

Inelastic scattering experiments are key methods for mapping the full dispersion of fundamental excitations of solids in the ground as well as nonequilibrium states. A quantitative analysis of inelastic scattering in terms of phonon excitations requires identifying the role of multiphonon processes. Here, we develop an efficient first-principles methodology for calculating the all-phonon quantum mechanical structure factor of solids. We demonstrate our method by obtaining excellent agreement between measurements and calculations of the diffuse scattering patterns of black phosphorus, showing that multiphonon processes play a substantial role. The present approach constitutes a step towards the interpretation of static and time-resolved electron, x-ray, and neutron inelastic scattering data.

36 MATERIALS SCIENCE↗

Signature of spin-phonon coupling driven charge density wave in a kagome magnet

Abstract The intertwining between spin, charge, and lattice degrees of freedom can give rise to unusual macroscopic quantum states, including high-temperature superconductivity and quantum anomalous Hall effects. Recently, a charge density wave (CDW) has been observed in the kagome antiferromagnet FeGe, indicative of possible intertwining physics. An outstanding question is that whether magnetic correlation is fundamental for the spontaneous spatial symmetry breaking orders. Here, utilizing elastic and high-resolution inelastic x-ray scattering, we observe a c-axis superlattice vector that coexists with the 2 $$\times$$ × 2 $$\times$$ × 1 CDW vectors in the kagome plane. Most interestingly, between the magnetic and CDW transition temperatures, the phonon dynamical structure factor shows a giant phonon-energy hardening and a substantial phonon linewidth broadening near the c-axis wavevectors, both signaling the spin-phonon coupling. By first principles and model calculations, we show that both the static spin polarization and dynamic spin excitations intertwine with the phonon to drive the spatial symmetry breaking in FeGe.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Multimessenger measurements of the static structure of shock-compressed liquid silicon at 100 GPa

The ionic structure of high-pressure, high-temperature fluids is a challenging theoretical problem with applications to planetary interiors and fusion capsules. Here we report a multimessenger platform using velocimetry and angularly and spectrally resolved x-ray scattering to measure the thermodynamic conditions and ion structure factor of materials at extreme pressures. We document the pressure, density, and temperature of shocked silicon near 100 GPa with uncertainties of 6%, 2%, and 20%, respectively. The measurements are sufficient to distinguish between and rule out some ion screening models. Published by the American Physical Society 2024

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Pressure-induced structural and dielectric changes in liquid water at room temperature

Understanding the pressure-dependent dielectric properties of water is crucial for a wide range of scientific and practical applications. In this study, we employ a deep neural network trained on density functional theory data to investigate the dielectric properties of liquid water at room temperature across a pressure range of 0.1–1000 MPa. We observe a nonlinear increase in the static dielectric constant ɛ 0 with increasing pressure, a trend that is qualitatively consistent with experimental observations. This increase in ɛ 0 is primarily attributed to the increase in water density under compression, which enhances collective dipole fluctuations within the hydrogen-bonding network as well as the dielectric response. Despite the increase in ɛ 0 , our results reveal a decrease in the Kirkwood correlation factor G K with increasing pressure. Furthermore, this decrease in G K is attributed to pressure-induced structural distortions in the hydrogen-bonding network, which weaken dipolar correlations by disrupting the ideal tetrahedral arrangement of water molecules.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Measuring Intelligence with the Sandia Matrices: Psychometric Review and Recommendations for Free Raven-Like Item Sets

The Sandia Matrices are a free alternative to the Raven’s Progressive Matrices (RPMs). This study offers a psychometric review of Sandia Matrices items focused on two of the most commonly investigated issues regarding the RPMs: (a) dimensionality and (b) sex differences. Model-data fit of three alternative factor structures are compared using confirmatory multidimensional item response theory (IRT) analyses, and measurement equivalence analyses are conducted to evaluate potential sex bias. Although results are somewhat inconclusive regarding factor structure, results do not show evidence of bias or mean differences by sex. Finally, although the Sandia Matrices software can generate infinite items, editing and validating items may be infeasible for many researchers. Further, to aide implementation of the Sandia Matrices, we provide scoring materials for two brief static tests and a computer adaptive test. Implications and suggestions for future research using the Sandia Matrices are discussed.

60 APPLIED LIFE SCIENCES↗

Real-time time-dependent density functional theory in Quantum Espresso and related codes

A set of subroutines that interact with an existing computer program, Quantum Espresso (QE), that takes a set of electronic orbitals from QE and propagates them forward in time in response to a number of perturbations. These perturbations include the motion of ions and a wide spectrum of applied electromagnetic fields (e.g., static magnetic fields, slowly-varying electric fields, x-rays, etc.). From the time evolution of the electronic orbitals comes time-varying values of physical observables like the electronic charge and current densities and atomic forces. These are further post-processed to yield properties of interest like stopping powers, conductivities, and the dynamic structure factor. The electronic orbitals are described in a plane wave basis and the equations of motion are carried out using a unitary or approximately unitary time propagation algorithm. Related work will include subroutines for interfacing this capability, as well as others that already exist within QE, with a fork of QE that is more extensible and modular.SAND2019-12611 M Sandia National Laboratories is a multimission laboratory managed and operated by National Technology & Engineering Solutions of Sandia, LLC, a wholly owned subsidiary of Honeywell International Inc., for the U.S. Department of Energy's National Nuclear Security Administration under contract DE-NA0003525.

Baczewski, Andrew↗

Aerosol jet printed capacitive strain gauge for soft structural materials

Soft structural textiles, or softgoods, are used within the space industry for inflatable habitats, parachutes and decelerator systems. Evaluating the safety and structural integrity of these systems occurs through structural health monitoring systems (SHM), which integrate non-invasive/non-destructive testing methods to detect, diagnose, and locate damage. Strain/load monitoring of these systems is limited while utilizing traditional strain gauges as these gauges are typically stiff, operate at low temperatures, and fail when subjected to high strain that is a result of high loading classifying them as unsuitable for SHM of soft structural textiles. For this work, a capacitance based strain gauge (CSG) was fabricated via aerosol jet printing (AJP) using silver nanoparticle ink on a flexible polymer substrate. Printed strain gauges were then compared to a commercially available high elongation resistance-based strain gauge (HE-RSG) for their ability to monitor strained Kevlar straps having a 26.7?kN (6?klbf) load. Dynamic, static and cyclic loads were used to characterize both types of strain monitoring devices. Printed CSGs demonstrated superior performance for high elongation strain measurements when compared to commonly used HE-RSGs, and were observed to operate with a gauge factor of 5.2 when the electrode arrangement was perpendicular to the direction of strain.

36 MATERIALS SCIENCE↗

Compositionally graded Ga 1-x In x P buffers grown by static and dynamic hydride vapor phase epitaxy at rates up to 1 μm/min

Here, we demonstrate Ga 1-x In x P compositionally graded buffers (CGBs) grown on GaAs with lattice constants between GaAs and InP by hydride vapor phase epitaxy (HVPE). Growth rates were up to ~1 μm/min and threading dislocation density (TDD) was as low as 1.0 x 10 6 cm -2 . We studied the effect of substrate offcut direction, growth rate, and strain grading rate on CGB defect structure. We compared the effect of a “dynamic grading” style, which creates compositional interfaces via mechanical transfer of a substrate between two growth chambers, vs. “static grading” where the CGB grows in a single chamber. Dynamic grading yielded smoother grades with higher relaxation, but TDD was not significantly different between the two styles. Substrate offcut direction was the most important factor for obtaining CGBs with low defect density. (001) substrates offcut towards (111)B yielded smoother CGBs with lower TDD compared to CGBs grown on substrates offcut towards (111)A. Transmission electron microscopy of static and dynamic CGBs grown on A and B-offcuts only found evidence of phase separation in a static A-offcut CGB, indicating that the B offcut limits phase separation, which in turn keeps TDD low. Reduced growth rate led to the appearance CuPt-type atomic ordering, which affected the distribution of dislocations on the active glide planes but did not alter TDD. Higher growth rates led to smoother CGBs and did not appreciably increase TDD as otherwise predicted by steady-state models of plastic relaxation. These results show HVPE’s promise for lattice-mismatched applications and low-c ost InP virtual substrates on GaAs

36 MATERIALS SCIENCE↗

Bifurcation Buckling Analysis and Non-Linear Collapse Analysis of Teardrop Shaped Vacuum Chamber

The Spallation Neutron Source (SNS) accelerator is being upgraded to increase the beam power from 1.4MW at 1GeV to 2.8MW at 1.3GeV. The currents in the middle two injection chicane magnets cannot simply be scaled up to accommodate the increased injection energy of 1.3GeV due to potential excessive H- stripping; the magnets must be replaced with longer, lower-field magnets and the associated vacuum chambers need to be redesigned. A new teardrop-shaped vacuum chamber was initially designed to accommodate the new magnets and the updated beam paths and instrumentation. This paper focuses on the structural stability study of the teardrop shape vacuum chamber based on buckling analysis. Protection against collapse from buckling according to the ASME BPVC requirement has been evaluated in depth. First, a Type-1 bifurcation buckling analysis using a linear eigenvalue solution to determine the critical load factor was performed. Subsequently, a Type-3 nonlinear collapse analysis was conducted using the static Riks method with elastic-plastic material properties and imperfections explicitly considered in the model geometry. The critical buckling load for the teardrop shape vacuum chamber was confidently estimated based upon this two-stage approach.

Jiang, Hao↗

Integrated Silicon Fourier Transform Spectrometer with Broad Bandwidth and Ultra‐High Resolution

An ultra-high resolution Fourier transform spectrometer (FTS) realized in silicon photonic platform that can operate with broad band, narrow band as well as a combination of broad band and narrow band signals is reported. The ultra-high resolution of the spectrometer is achieved by exploiting multiple techniques: a Michelson interferometer (MI) structure to increase the optical path delay (OPD), a hybrid waveguide design to reduce insertion loss, an optimized heater and air trenches to achieve higher thermal efficiency. Here, to further increase the OPD of the spectrometer to increase its resolution, a novel multiple interferometers approach is employed which combines balanced MI with N statically imbalanced MIs, thereby increasing the OPD of a single MI by factor of N + 1. An FTS spectrometer consisting of N = 2 such MIs is fabricated and experimentally characterized using unknown broad bandwidth input signal spectra of about 180 nm centered around 1550 nm, a narrow line laser input signal, and a combination of broad and narrow band signals demonstrating spectral resolution of about 0.16 nm.

Li, Ang↗

Langevin Dynamics modeling of gas-phase ion-ion recombination (Final Technical Report)

A self-consistent trajectory simulation approach to model MN reactions (Fig. 1) which incorporates the probability of electron transfer as a Monte Carlo operator (Fig. 2) was developed and published as Liu et al. J. Chem. Phys. 159, 114111 (2023). The electron transfer probability p ET estimated using the two-state Landau-Zener (LZ) theory was incorporated into classical trajectory simulations to elicit predictions of MN reaction cross-section σ (vacuum) or rate constant β (finite pressure). Electronic structure calculations with multireference configuration interaction (MRCI) and large correlation consistent basis sets were used to derive inputs to the LZ theory. The key advance of our trajectory simulation approach is the incorporation of electron transfer probability and the inclusion of the effect of ion-neutral interactions on MN using a Langevin representation of the effect of neutral gas on ions. For H + – H - and Li + – H(D) - pairs, our approach quantitatively agrees with measured speed-dependent cross-sections for up to ~10 5 m/s. For the ion pair Ne + – Cl - , our predictions of the MN rate constant at ~1 torr are a factor of ~2 – 3 higher than the experimentally measured value. Similarly, for Xe + – F - in the pressure range of ~20000 – 80000 Pa, our predictions of the MN rate constant are ~20% lower but are in excellent qualitative agreement with experimental data. The paradigm of using trajectory simulations to self-consistently model MN reactions is the basis for inclusion of additional non-classical, and static magnetic and electric field effects. Subsequent work, published as Roy et al. focused on modeling recombination rate constant for three ion pairs (rare gas Ar + cation and halide anions): Ar + – Cl - , Ar + – Br - , Ar + – I - , 2) considering spin-orbit couplings in the electronic structure calculations to obtain high-fidelity estimates of the electron transfer probability and incorporated within the classical trajectory simulations to elicit predictions. In addition to calculations of ion-ion recombination rate constants, a classical trajectory simulation technique (published as Roy et al. J. Chem. Phys. 162(9), 094104 (2023)) that uses quaternions to represent orientation of non-spherical particles (ions or aerosol particles) was developed to simulate the recombination of diatomic or more generally, polyatomic molecules. Finally, several other ion pairs such as Ne + – Cl - , Kr + – Cl - , were explored using the developed semi-classical trajectory simulations to understand various challenges in tackling electronic structure calculations. Using empirical approaches to parameterize the electron transfer radius, trajectory simulations were also used to probe the effect of ion number density on MN rate constant.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Wind Loading on Parabolic Trough Collectors: Wind and Structural Loads Measurements at an Operational Powerplant

Concentrated Solar Power (CSP) is a promising method for using solar power for electricity generation with thermal energy storage for industrial applications. Solar collectors constitute almost 1/3 of the total cost of the power plant. One of the primary drivers of unrealiability of these collectors is wind-driven loading of mirrors, support structures, and drives. To date, the design of the solar collector structures has relied on data from wind tunnels that do not adequately capture the dynamic effects observed at scale. NREL initiated a field measurement campaign at the operational Nevada Solar One (NSO) parabolic trough powerplant. At this plant, parabolic trough solar collectors track the sun from east to west in the course of a day and face varying wind loads depending on the wind properties and the angle of the troughs. The aim of the project is a detailed characterization of prevailing wind and turbulence conditions and resulting operational loads on parabolic troughs, providing insights into structural dynamic response, and generating a comprehensive wind-loading dataset for validating simulations of wind loading on collector structures. The measurements at NSO consist of sonic anemometers on masts at different heights to characterize the incoming flow and conditions at four trough rows at the edge of the trough field. In addition, a Doppler Lidar scans the horizontal plane above the troughs. The wind measurements at NSO have been continuously collecting data since October 2021 and are combined with structural load measurements that started in November 2022. The load measurements were installed on the same four outermost trough rows and include support structure bending moments, drive torque moments, dynamic accelerations of the spaceframe, mirror displacement, and tilt angles. Measurements are planned to continue until May 2023, providing a first-of-a-kind, high-resolution multi-month dataset of combined wind and load measurements. In this presentation, we show first results of the measurement campaign. Based on the measurements, we identified three main factors altering the flow over the parabolic troughs: Wind speed, wind direction, and the angle of the parabolic troughs. Most interactions between incoming wind and the trough field are observed when the wind blows perpendicular to the trough rows. In this case, the first rows experience the highest wind speed and block the downwind rows, creating conditions with decreased wind speed and enhanced turbulence within the trough field. Also, turbulent length scales are smaller after the first row. This leads to the highest static loads (bending and torque moments) at the first row but potentially increased dynamic loads within the field. We illustrate our findings with case studies focused on different wind conditions and will present fatigue analysis to highlight the impact of wind-driven loads on collector structures.

CSP collectors↗

Mass enhancement in 3 d and s - p perovskites from symmetry breaking

In some d-electron oxides, the measured effective mass m* exptl has long been known to be significantly larger than the model effective mass m* model deduced from mean-field band theory, i.e., m* exptl =βm* model , where β>1 is the “mass-enhancement” or “mass-renormalization” factor. Previous applications of density functional theory (DFT), based on a symmetry-restricted structure with the smallest number of possible magnetic, orbital, and structural degrees of freedom, missed such mass enhancement. This fact has been taken as evidence of strong electronic correlation, often described via the symmetry-restricted dynamic mean-field approach of the many-body theory, being the exclusive enabling physics. This paper uses instead a static density functional approach that does not restrict positional or spin degrees of freedom (symmetry-broken structures). This approach analyzes the contributions of different symmetry-broken modalities to mass enhancement for a few nominally highly correlated d-electron perovskites as well as the nominally uncorrelated, closed-shell s-p bonding perovskites. It shows that the energy-lowering symmetry-broken spin effects (e.g., nonzero local moment in the paramagnetic phase) and structural effects (e.g., atomic displacement) as described in mean-field DFT already manifest mass enhancement for both electrons and holes in a range of d-electron perovskites SrVO 3 , SrTiO 3 , BaTiO 3 , and LaMnO 3 , as well as p-electron perovskites CsPbI 3 and SrBiO 3 , including both metals (SrVO 3 ) and insulators (the rest). This is revealed only when enlarged unit cells of the same parent global symmetry, which are large enough to allow for symmetry-breaking distortions and concomitant variations in spin order, are explored for their ability to lower the total energy. Positional symmetry breaking that leads to mass enhancement includes octahedral rotation in halide perovskites such as CsPbI 3 , Jahn-Teller-like Q${+}\atop{2}$ distortion in LaMnO 3 , and bond disproportionation in SrBiO 3 , while magnetic symmetry breaking resulting in mass enhancement includes the formation of a distribution of local moments in SrVO3 that averages to zero in the paramagnetic phase. Not all symmetry breaking leads to significant mass enhancement, e.g., the rather small octahedral rotations in the nearly perfectly cubic SrTiO 3 cause negligible mass enhancement, as do the paraelectric displacements in BaTiO 3 . In principle, by ergodicity, the two descriptions, i.e., the symmetry-restricted dynamic approach with a single time-fluctuating magnetic moment and the symmetry-broken mean-field approach with a static distribution of spatially fluctuated local moments, are not mutually exclusive but are a choice of representation and consequently, a choice of computational efficiency. In approximate implementations, the symmetry-broken mean-field approach appears to remove much of what was strong correlation in dynamically correlated symmetry-restricted solutions, leaving smaller (“weak”) residual correlation with respect to the exact solution.

36 MATERIALS SCIENCE↗

X-ray diffraction measurements and pressure determination in nanosecond compression of solids up to 600 GPa

X-ray diffraction measurements under laser-driven dynamic compression now allow us to investigate the atomic structure of matter at TPa pressures and thousands of degree temperatures with broad implications for condensed matter physics, planetary science and astronomy. Furthermore, pressure determination in these experiments often relies on velocimetry measurements coupled with modeling that requires accurate knowledge of the optical and thermo-mechanical properties of a window material, resulting in significant systematic uncertainty. Here we demonstrate different approach applicable to X-ray diffraction experiments under quasi-isentropic ramp-compression based on the use of in-situ pressure calibrants, similar to the methods often adopted in static-compression experiments with diamond anvil cells. Focusing on experiments using a diamond window, we discuss challenges and mitigation strategies for the novel approach. Our study, in addition to providing new structural information of 5 metals up to hundreds of GPa, provides validation to the currently used methods based on time-resolved measurement of the diamond free-surface velocity, and reveals that the use of in-situ calibrants enables a factor of four reduction in the pressure uncertainty in these experiments.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Comparison of interband related optical transitions and excitons in ZnGeN 2 and GaN

The optical dielectric function of ZnGeN 2 is calculated from the interband transitions using the energy bands calculated in the quasiparticle self-consistent (QS)GW^ method using two different levels of approximation: the independent particle approximation (IPA) and the Bethe-Salpeter Equation (BSE) approach. The first allows us to relate peaks in ε 2 to specific bands and k-points but does not include electron-hole interaction effects. The second includes electron-hole interaction or excitonic effects. The corresponding changes in the shape of ε 2 (ω) are found to be similar to those in GaN. The screened Coulomb interaction W^ is here calculated including electron-hole interactions in the polarization function and gives a band structure already going beyond the random phase approximation. The static dielectric constants including only electronic screening, commonly referred to as ε∞ , were calculated separately by extrapolating the wave vector dependent macroscopic dielectric function in the long-wavelength limit. Below the quasiparticle gap, we find three bound excitons optically active for different polarization. The convergence of these bound excitons with respect to the density of the k-mesh used in the BSE is studied and found to require a fine mesh. It is also found that these bound excitons originate from only the lowest conduction band and the top three valence bands. To incorporate the lattice screening, we include a scaling factor (ε∞/ε 0 ) 2 , which allows us to obtain exciton binding energies of the correct order of magnitude similar to those in GaN. Here, the excitons are related to each of the three fold split valence bands and the splittings of the latter are also studied as function of strain. Finally, a relation between the anisotropic effective masses and the valence band splitting is pointed out and explained.

36 MATERIALS SCIENCE↗

In Operando Angle‐Resolved Photoemission Spectroscopy with Nanoscale Spatial Resolution: Spatial Mapping of the Electronic Structure of Twisted Bilayer Graphene

To pinpoint the electronic and structural mechanisms that affect intrinsic and extrinsic performance limits of 2D material devices, it is of critical importance to resolve the electronic properties on the mesoscopic length scale of such devices under operating conditions. Herein, angle‐resolved photoemission spectroscopy with nanoscale spatial resolution (nanoARPES) is used to map the quasiparticle electronic structure of a twisted bilayer graphene device. The dispersion and linewidth of the Dirac cones associated with top and bottom graphene layers are determined as a function of spatial position on the device under both static and operating conditions. The analysis reveals that microscopic rotational domains in the two graphene layers establish a range of twist angles from 9.8° to 12.7°. Application of current and electrostatic gating lead to strong electric fields with peak strengths of 0.75 V/μm at the rotational domain boundaries in the device. These proof‐of‐principle results demonstrate the potential of nanoARPES to link mesoscale structural variations with electronic states in operating device conditions and to disentangle such extrinsic factors from the intrinsic quasiparticle dispersion.

Majchrzak, Paulina↗