Search NASA⌕ Search

SEARCH · Search NASA

Results for “stream operators”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Interpretable Models for Workflow Differentiation in High-Performance Scientific Networks

Scientific workflows in high-performance networks spawn hundreds of interdependent flows that must be managed collectively—yet existing network classifiers treat each flow in isolation, leading to fragmented QoS decisions and missed interflow patterns. We present a novel traffic classification solution that operates at the workflow level, distinguishing entire filetransfer operations from streaming analytics by capturing how concurrent flows interact and burst together. We introduce a workflow identification window (WIW) that ingests raw packet headers from parallel flows into unified tensors, preserving the spatial-temporal patterns that differentiate scientific workflows. This approach achieves 98.7% accuracy using CNN, LSTM, and hybrid architectures, while maintaining 84% accuracy on production traffic collected a week later—demonstrating robustness to temporal drift. By integrating SHAP and GradCAM explainability, we reveal that early-packet timing patterns and cross-flow correlations drive classification decisions, providing operators with interpretable insights. Our system enables coherent workflow-level QoS enforcement and dynamic bandwidth allocation in scientific networks, eliminating manual per-flow configuration while maintaining classification latency at millisecond level.

Giannakou, Anna [LBL, Berkeley]↗

Experimental investigation of water injection in subsonic diffuser of a conical inlet operation at free-stream Mach number of 2.5

A spike-type nose inlet with sharp-lip cowl was investigated at a free-stream Mach number of 2.5 with water injection in its 16-inch diameter, 11-foot-long subsonic diffuser section. Inlet total temperature of exit with liquid-air ratios of about 0.04 with no apparent change in the critical pressure recovery. The observed temperature drops were less than the theoretically predicted values, and the amount of water evaporated was 35 to 50 percent less than that theoretically possible.

Beke, Andrew↗

A Two-Stage Biological Reactor for Treatment of Space Based Waste Waters

Previous works on Membrane Aerobic Biological Reactors (MABR) CoMANDR 1.0, CoMANDR 2.0, and R-CoMANDAR have demonstrated their ability to stabilize various space based waste streams over operating periods of ~1 year. Biological pretreatment by MABR systems can stabilize space based waste streams. Biological stabilization includes reducing the pH, conversion of organic N to NOx- and oxidation of dissolved organic matter to CO2. These processes produce a more stable waste product (brine), facilitate the distillation processes, and enable evaporative or membrane based systems. An alternative to aerobic operation would be to include anoxic operation to promote denitrification and production of N2 gas. This results in a reduced O2 demand and increases ammonia oxidation efficiency. Denitrifictaion can be accomplished in either a single reactor (Simultaneous Nitrification Denitrification) or in a two-stage system with separate aerobic and anoxic reactors. We evaluated the performance of both architectures in pilot scale systems (1-2 crew/d). Each system was continuously operated for over 2 years during which they processed a variety of habitation waste streams (ISS, Transit, and EPB) in both a continuous and on production feed mode. Here we report the results of the two stage system. Results indicate that the two stage system can successfully remove organic carbon, lower pH and convert organic N to N2 gas. Organic carbon and organic N oxidation reaction rates for the two stage system are similar to past studies for single stage aerobic systems. The two stage system is more complex and requires an additional pump. While no maintenance was required on the system during the nearly two year period of operation, the packed bed did produce N2 gas for many operational test points. The performance and comparison of operational conditions are detailed below

Water↗

Linearized Coulomb Collision Operator for Simulation of Interpenetrating Plasma Streams

We present an extension of a linearized Coulomb collision operator, previously used in several Eulerian kinetic codes for like-species collisions and unlike-species collisions in the case where the backgrounds about which the linearization is made all are in collisional equilibrium, to the situation of interpenetrating plasma streams. In the latter case, the backgrounds can not be taken to be in equilibrium and a significant generalization is required. Our development is targeted towards the Eulerian kinetic plasma code LOKI, which evolves the Vlasov- Poisson or Vlasov-Maxwell system in a Cartesian “2+2-dimensional” phase space. The extended operator has been implemented in a test code, and results of both quantitative verification and qualitative “realizability” tests are presented.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

In-Can Melter for Vitrification of Waste Coming from Decommissioning and Dismantling Operations - 19020

Some waste streams from decommissioning and dismantling operations are identified as an issue in terms of handling, transportation, adapted conditioning matrix or evacuation outlet within the existing regulations. In this context, the consortium of the DEM and MELT project which gathers Orano, the CEA and ECM technologies are currently developing and qualifying a specific vitrification tool designed to match the requirements and constraints of D and D projects. The main characteristics of this In-Can vitrification process are presented hereafter: - Suitable for high or medium level waste; - Flexible enough to accommodate uncertainties on waste composition; - Adequately dimensioned and compact to be implemented and operated inside an existing cell or close to the waste to be treated; - Designed for a short duration of use, as a decommissioning tool, aimed to be dismantled just after the treatment operation; - Designed in order to produce a small amount of secondary waste; - Requiring low investment and operation costs. The In-Can melting process has already been developed by the CEA for an internal application (defense waste vitrification) and can be rated TRL 7. That means it has been tested at full scale at a prototypical demonstration level with a range of simulants in an operational environment. This paper presents the In-Can vitrification process and its performances for a typical D and D waste highly loaded with Cs. The vitrification tests results will be in particular discussed in terms of process parameters, glass properties and cesium volatility. This paper also highlights the methodology and the organization (material, process, technological and long term behavior teams) deployed in order to adapt and qualify the In-Can process for all kind of wastes (liquid, solid, highly loaded with Tc and Cs, waste with no route, ...) from the matrix design definition to the full qualification. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Jet stream winds - Comparisons of analyses with independent aircraft data over Southwest Asia

Cruise-level wind data from commercial aircraft are obtained, and these data are compared with operational jet stream analyses over southwest Asia, an area of limited conventional data. Results from an ensemble of 11 cases during January 1989 and individual cases during December 1988-March 1989 are presented. The key results are: (1) European Centre for Medium-Range Weather Forecasts (ECMWF), National Meteorological Center, and United Kingdom Meteorological Office analyses of the subtropical jet in southwest Asia are 11 percent, 17 percent, and 17 percent weaker, respectively, than aircraft observations; (2) analyzed poleward shears range up to 1 f (0.00007/s) compared with up to 3 f (0.00021/s) in the aircraft observations where f is the local Coriolis parameters; (3) the ECMWF errors are largest at the base of the jet; (4) the mean ECMWF core location is latitudinally correct but has an rms latitude variance of 1.5 deg; (5) isolated erroneous radiosondes produce unmeteorological structures in the analyzed subtropical jet stream; and (6) the increased utilization of automated aircraft reports is likely to produce a spurious secular increase in the apparent strength of the jets. The magnitude and spatial extent of the errors seen are near limits of current GCM resolution (100 km) but should be resolvable. The results imply that studies of GCM systematic jet stream wind errors in weather and climate forecasts must be interpreted with caution in this region.

Tenenbaum, J.↗

Study of Different Formulations for the Multiperiod Blending Problem Applied to Lithium Recovery from Produced Water

We present several formulations to solve the MPBP for the recovery of REE/CMs from produced water and propose a decomposition approach thatleverages strategies in general disjunctive programming to enhance its performance. We compare these proposed formulations/strategies via two illustrative case studies on recovering lithium from a network of produced water sources.

Ovalle, Daniel↗

Shock-associated noise reduction from inverted-velocity-profile coannular jets

The reduction of shock-associated noise in inverted velocity profile coannular jets is investigated and quantified by making optical and acoustic measurements as a function of outer and inner stream pressure ratio combinations and interpreting noise results with the aid of new theoretical models. Schlieren photographs are obtained in three series of test conditions with a varying primary stream pressure ratio, and acoustic experiments are conducted on a polar arc radius of 3.05 m over a frequency range of 200 Hz to 80 kHz. A constant-thrust comparison is made, and data are plotted and discussed with emphasis on the variation of jet noise levels with primary stream Mach number and equivalent single jets on an absolute basis. It is shown that shock noise from the outer stream is almost eliminated when the inner stream is operated at a Mach number above unity at inverted and normal velocity profile conditions, and optical measurements indicate that for a fixed supercritical fan stream pressure ratio, the repetitive shock structure in the outer stream is minimized when the primary stream ratio becomes supercritical.

Tanna, H. K.↗

Ice in Channels and Ice-Rock Mixtures in Valleys on Mars: Did They Slide on Deformable Rubble Like Antarctic Ice Streams?

Recent studies of ice streams in Antarctica reveal a mechanism of basal motion that may apply to channels and valleys on Mars. The mechanism is sliding of the ice on deformable water-saturated till under high pore pressures. It has been suggested by Lucchitta that ice was present in outflow channels on Mars and gave them their distinctive morphology. This ice may have slid like Antarctic ice streams but on rubbly weathering products rather than till. However, to generate water under high pore pressures, elevated heatflow is needed to melt the base of the ice. Either volcanism or higher heatflow more than 2 b.y. ago could have raised the basal temperature. Regarding valley networks, higher heatflow 3 b.y. ago could have allowed sliding of ice-saturated overburden at a few hundred meters depth. If the original, pristine valleys were somewhat deeper than they are now, they could have formed by the same mechanism. Recent sounding of the seafloor in front of the Ross Ice Shelf in Antarctica reveals large persistent patterns of longitudinal megaflutes and drumlinoid forms, which bear remarkable resemblance to longitudinal grooves and highly elongated streamlined islands found on the floors of martian outflow channels. The flutes are interpreted to have formed at the base of ice streams during the last glacial advance. Additional similarities of Antarctic ice streams with martian outflow channels are apparent. Antarctic ice streams are 30 to 80 km wide and hundreds of kilometers long. Martian outflow channels have similar dimensions. Ice stream beds are below sea level. Carr determined that most common floor elevations of martian outflow channels lie below martian datum, which may have been close to or below past martian sea levels. The Antarctic ice stream bed gradient is flat and locally may go uphill, and surface slopes are exceptionally. Martian channels also have floor gradients that are shallow or go uphill locally and have low surface gradients. The depth to the bed in ice streams is 1 to 1.5 km. At bankful stage, the depth of the fluid in outflow channels was 1 to 2 km, according to the height of bordering scarps. The similarity between Antarctic ice streams and martian outflow channels suggests that ice may have flowed through and shaped the outflow channels, and that perhaps the mechanism of motion of Antarctic ice streams also operated in outflow channels. In addition, sliding on deformable rubble may explain the formation of small valley networks. The large Siple Coast Antarctic ice streams are thought to slide over longitudinally grooved, deforming till, where much of the movement is within the till. The till is saturated with water at high pore pressures that nearly supports all of the weight of the ice. The small differential between overburden pressure and pore pressure at the bed is more important than the volume of water, but water needs to be supplied to the till interface. For pore pressures to remain high, the ice streams have to act as a seal that blocks the flow of water through them, and the rock underneath has to be of low permeability to prevent the water from draining away.

Lucchitta, B. K.↗

A variable-data-rate, multimode quadriphase modem.

This paper describes the design and performance of a highly versatile modulator and demodulator recently developed to facilitate the evaluation of various digital communications links. The modem is capable of either PSK or QPSK operation and can accommodate a very wide range of continuously tunable data rates (1 kbps to 30 Mbps in each of two channels). In the QPSK mode, operation is possible using either a single serial data stream (single channel operation) or using two mutually independent, unrelated, and asynchronous data streams (dual-channel operation). Integrate and dump detectors are used at the demodulator for regeneration of the data stream(s). Measurements indicate that the performance of the overall system (including the bit detectors) is within 2 dB of the theoretically optimum performance of either PSK or QPSK at any rate within the range of rates provided by the modem, and is within 1 dB of theoretical over most of the range of rates.

Allen, R. W.↗

A Probabilistic Methodology for Determining Collision Risk of Marine Animals with Tidal Energy Turbines

Commercial development of tidal stream energy is hampered by technical and financial challenges, and impeded by uncertainty about potential environmental effects that drive environmental risk assessments and permitting (consenting) processes. The effect of greatest concern for operational tidal stream energy devices is the potential for marine animals to collide with turbine blades, resulting in injury or death. Due to the turbulent and often turbid waters that frequently characterize tidal turbine sites, there is an absence of empirical evidence about collisions with marine animals. This paucity of observations often leads to risk-averse permitting decisions that further restrict the deployment of tidal energy devices that are needed to collect this evidence. This paper relies on the framework of stressors and receptors that is widely used in marine energy studies and outlines a stepwise probabilistic methodology that applies existing knowledge to further elucidate the risk to marine animals from operational tidal turbines. A case study using striped bass from the Bay of Fundy, Canada, accompanies the methodology, to partially demonstrate its application.

16 TIDAL AND WAVE POWER↗

Testing Results from the Low Activity Waste Pretreatment System (LAWPS) Full-Scale Ion Exchange Column Test and Engineering Scale Integrated System Test - 18634

The U.S. Department of Energy (DOE), Office of River Protection's (ORP) primary mission is to retrieve and treat Hanford's tank waste and close the Tank Farms to protect the Columbia River. Mixed radioactive waste is stored in 177 underground tanks at the Hanford Site as reported in DOE/ORP 2003- 02, Environmental Impact Statement for Retrieval, Treatment, and Disposal of Tank Waste and Closure of the Single Shell Tanks at the Hanford Site, Richland WA, Inventory and Source Term Data Package. The 177 underground tanks are estimated to contain about 56 million gallons of waste. The Low Activity Waste Pretreatment System (LAWPS) Project provides for the early production of immobilized low activity waste (ILAW) by feeding LAW directly from Tank Farms to the Hanford Waste Treatment Plant's (WTP's) LAW Facility, bypassing the Pretreatment Facility. Prior to the transfer of feed to the WTP LAW Vitrification Facility, tank supernatant waste will be pretreated in the LAWPS to meet the WTP LAW waste acceptance criteria. The LAWPS will also facilitate the return of secondary liquid wastes from the WTP LAW Vitrification Facility to the Tank Farms. In November of 2015 DOE's Tank Operations Contractor, Washington River Protection Solutions (WRPS), awarded a contract to the AECOM team to design, fabricate and operate two test platforms to generate performance data at two different scales and demonstrate technology maturation. The first platform models the ion exchange (IX) columns at full scale, and the second platform models the integrated flowsheet (cross flow filter (CFF) and IX) at 1/9. scale. Overarching technical objectives of performing the full-scale ion exchange test and the engineering-scale integrated test are to: 1. Test interactions between unit process operations; 2. Test removal of non-radioactive cesium from process stream; 3. Test removal of undissolved solids from process stream; 4. Confirm operational flow rate range and stability; 5. Confirm volumetric throughput of waste stream over flow operating range; 6. Confirm range of process temperatures over planned operating range; 7. Establish system hydraulics and process criteria; 8. Coordinate key control and monitoring components; 9. Establish treated product chemistry meets requirements (cesium, solids, and pH); and 10. Test the hazard control strategy for a no flow condition through the IX column. Data collected during testing will be used by WRPS to validate the preliminary design, inform the final design of the permanent plant equipment, and demonstrate that the critical technology elements have advanced to a technology readiness level of 6 (prototypical system validation in a relevant environment). Testing on both platforms started in fall of 2016 generating NQA-1 data. This paper covers test results from the first five phases of testing on the 1/9. scale integrated test platform. A further three phases of testing are currently being executed, these including a 5.6 M sodium simulant containing foulant, a high viscosity simulant and finally a run performed with a lower Cs concentration (all earlier tests were spiked to 4 x Cs to reduce volume and cost). Results from these tests were not available at the time of writing available. Results are also presented from the full scale IX testing. Eight test were performed covering column loading, elution and regeneration; column loading, elution and regeneration with upflow displacement; IX column loading and gas migration; resin removal; solids accumulation; and IX column emergency recirculation and vent. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Operational Focused Data Analytics for Optimizing Radiation Portal Monitor-Based Nuclear Smuggling Detection Systems at Global Ports of Entry

The National Nuclear Security Administration’s Office of Nuclear Smuggling Detection and Deterrence has deployed a fleet of radiation portal monitors (RPMs) across the world at global ports of entry including seaports, airports, and land border crossings. These RPMs are integrated into radiation detection systems (RDS) that also include fixed cameras, optical character recognition (OCR) systems, primary scanning systems (e.g., X-ray or gamma-ray), and secondary scanning systems (e.g., spectroscopic radiation portal monitors, portable radiation detection systems). The data from these sensing technologies is collected at the Central Alarm Station (CAS) where servers and computers reside to control and operate the system. Operators utilize the data collected by the CAS and declared cargo information to make decisions on how to respond to an alarm.This work explores the use of CAS-located data, looking at both the sensor data streams and operator inputs, to perform analysis which supports customs and border protection agencies to improve training capability and operational effectiveness. We focus on analyzing site level effectiveness and behavior by rolling up CAS-located data collected from individual occurrences. To-date, more than 15 sites (e.g., seaports, airports, border crossings) have been analyzed in this manner with the goal of understanding system operations to verify effectiveness and recommend potential improvements. This work first aims to provide background information on relevant CAS-located data sources and our current operational system analytics process including example results. After summarizing our current analytic techniques, we discuss how the future data analytics systems can provide key benefits to improving operational performance while minimizing the burden these detection systems place on operators.

Kuhn, Michael↗

In-stream hydrokinetic power: Review and appraisal

The objective of this paper is to provide a review of in-stream hydrokinetic power, which is defined as electric power generated by devices capturing the energy of naturally flowing water-stream, tidal, or open ocean flows-without impounding the water. North America has significant in-stream energy resources, and hydrokinetic electric power technologies to harness those resources have the potential to make a significant contribution to U.S. electricity needs by adding as much as 120 TWh/year from rivers alone to the present hydroelectric power generation capacity. Additionally, tidal and ocean current resources in the U.S. respectively contain 438 TWh/year and 163 TWh/year of extractable power. Among their attractive features, in-stream hydrokinetic operations do not contribute to greenhouse gas emissions or other air pollution and have less visual impact than wind turbines. Since these systems do no utilize dams the way traditional hydropower systems typically do, their impact on the environment will differ, and a small but growing number of studies support conclusions regarding those impacts. Furthermore, potential environmental impacts include altered water quality, altered sediment deposition, altered habitats, direct impact on biota, and navigability of waterways.

13 HYDRO ENERGY↗