SEARCH · Search NASA

Results for “string method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

All sources NASA NTRS DOE OSTI

DOE OSTI2017

Determination of battery stability with advanced diagnostics.

Lithium ion batteries for use in battery electric vehicles (BEVs) has seen considerable expansion over the last several years. It is expected that market share and the total number of BEVs will continue to increase over coming years and that there will be changes in the environmental and use conditions for BEV batteries. Specifically aging of the batteries and exposure to an increased number of crash conditions presents a distinct possibility that batteries may be in an unknown state posing danger to the operator, emergency response personnel and other support personnel. The present work expands on earlier efforts to explore the ability to rapidly monitor using impedance spectroscopy techniques and characterize the state of different battery systems during both typical operations and under abusive conditions. The work has found that it is possible to detect key changes in performance for strings of up to four cells in both series and parallel configurations for both typical and abusive response. As a method the sensitivity for detecting change is enhanced for series configurations. For parallel configurations distinct changes are more difficult to ascertain, but under abusive conditions and for key frequencies it is feasible to use current rapid impedance techniques to identify change. The work has also found it feasible to use rapid impedance as an evaluation method for underload conditions, especially for series strings of cells.

25 ENERGY STORAGE↗

DOE OSTI2023

Use of non-contact voltmeter to quantify potential induced degradation in CdTe modules

Potential induced degradation (PID) is a significant reliability issue for photovoltaic modules in the field. Conventionally, to detect the PID-affected modules, all the modules in a string are individually disconnected and measured using I-V (current–voltage) tracers. It is extremely time-consuming, expensive and unsafe (if the module connectors are field aged) approach. In our approach, we aim detecting the PID-affected modules quickly, inexpensively and safely without disconnecting individual modules in the string. In this study, contactless electrostatic voltmeter’s (ESV) strength was explored to detect the PID-affected cadmium telluride (CdTe) modules in a string. These contactless measurements on high-voltage PV strings could make this technique unique and preferable to detect PID-affected modules in a string compared to the I-V curve method. In this work, a CdTe module was stressed for PID using the Aluminum (Al) foil method in a walk-in environmental chamber, which resulted in a reduction of module's peak current (I max ), peak voltage (Vmax), and fill factor (FF), and hence power (Pmax). Outdoor light I-V, EL, and ESV measurements were performed pre- and post-PID to determine the effectiveness of the non-contact ESV technique. Further, the ESV technique successfully detected the change in V max , and hence Pmax, compared to the pre-and post-PID conditions. A difference of less than 2% was observed in the results of the non-contact and non-interruptive method compared to the conventionally used interruptive voltmeter or I-V tracer method. This technique and the test results demonstrate a significant promise to identify poor-performing modules in PV string without disconnection of individual modules in the string.

14 SOLAR ENERGY↗

DOE OSTI2024

Spread Spectrum Time Domain Reflectivity for String Monitoring in PV Power Plants (Final Technical Report)

This final report describes the methods and results of applying Spread Spectrum Time Domain Reflectivity (SSTDR) for String Monitoring in PV Power Plants for DE-EE0008169. The project created a new system for both detecting and locating electrical faults in photovoltaic systems. In this work, we address photovoltaic electric faults that are both common and costly. Based on interviews with photovoltaic power plant owners, operators, and maintainers, three types of faults are common and of significant interest: disconnects, ground faults, and arc faults. Disconnects can originate from many sources. They are often due to everyday events, such as lawnmowing (accidentally running over a cable), animals eating through the cables, or degradation that occurs over time due to corrosion or general degradation. Ground faults occur when the cables (for example, due to frayed insolation) connect to the ground, relaying current into the ground. These faults are particularly problematic since the ground faults are often intermittent. That is, ground faults commonly appear during rain storms due to a change in soil conductivity and then disappear when the rain ends. This makes the ground fault difficult to find because while current systems can detect the overall change in voltage and current associated with a ground fault, technicians are necessary to locate the fault. As a result, ground faults may disappear before the technician arrives at the power plant. Hence, locating and fixing ground faults often require multiple trips. We also study arc faults, which can result when nearby conductors create an arc of electrical current through the air. While less common, arc faults can be extremely dangerous. The energetic electrical arc can cause fires and destroy equipment, costing significant damage. Overall all three types of faults cost owners and operators money, either from the destruction of equipment or from technician time. Furthermore, while devices exist for detecting ground faults (ground fault circuit interrupters) and arc faults (arc fault circuit interrupter), these systems only search patterns of electrical current that correspond to each fault. This information cannot be used to locate the fault. In addition, these protection systems experience nuisance trips due to nearby electromagnetic interference, such as from a lawn mower or other motors that produce significant amounts of electromagnetic radiation. Hence, the overall goal of this project is to create an SSTDR tool that provides photovoltaic power plants with more reliable fault detection in addition to the localization of faults. SSTDR works by transmitting electrical signals into the photovoltaic string. Those signals reflect from impedance discontinuities (i.e., disconnects, ground faults, and arc faults). These faults are then detected by measuring the presence of a reflection at the SSTDR and can be located by identifying the location of that reflection in time. In addition, unlike current protection systems, these systems do not experience nuisance trips since their low amplitude, high frequency, and coded signal can by analyzed without interference from the regular operational voltage on the photovoltaic string.

14 SOLAR ENERGY↗

DOE OSTI2021

One-loop matrix elements of effective superstring interactions: α' -expanding loop integrands

In the low-energy effective action of string theories, non-abelian gauge interactions and supergravity are augmented by infinite towers of higher-mass-dimension operators. We propose a new method to construct one-loop matrix elements with insertions of operators D 2k F n and D 2k R n in the tree-level effective action of type-I and type-II superstrings. Inspired by ambitwistor string theories, our method is based on forward limits of moduli-space integrals using string tree-level amplitudes with two extra points, expanded in powers of the inverse string tension α'. Similar to one-loop ambitwistor computations, intermediate steps feature non-standard linearized Feynman propagators which eventually recombine to conventional quadratic propagators. With linearized propagators the loop integrand of the matrix elements obey one-loop versions of the monodromy and KLT relations. We express a variety of four- and five-point examples in terms of quadratic propagators and formulate a criterion on the underlying genus-one correlation functions that should make this recombination possible at all orders in α'. The ultraviolet divergences of the one-loop matrix elements are crosschecked against the non-separating degeneration of genus-one integrals in string amplitudes. Conversely, our results can be used as a constructive method to determine degenerations of elliptic multiple zeta values and modular graph forms at arbitrary weight.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2020

Heterotic instantons for monad and extension bundles

We consider non-perturbative superpotentials from world-sheet instantons wrapped on holomorphic genus zero curves in heterotic string theory. These superpotential contributions feature prominently in moduli stabilization and large field axion inflation, which makes their presence or absence, as well as their functional dependence on moduli, an important issue. We develop geometric methods to compute the instanton superpotentials for heterotic string theory with monad and extension bundles. Using our methods, we find a variety of examples with a non-vanishing superpotential. In view of standard vanishing theorems, we speculate that these results are likely to be attributed to the non-compactness of the instanton moduli space. We test this proposal, for the case of monad bundles, by considering gauged linear sigma models where compactness of the instanton moduli space can be explicitly checked. In all such cases, we find that the geometric results are consistent with the vanishing theorems. Surprisingly, linearly dependent Pfaffians even arise for cases with a non-compact instanton moduli space. This suggests some gauged linear sigma models with a non-compact instanton moduli space may still have a vanishing instanton superpotential.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2025

Loop-string-hadron approach to SU(3) lattice Yang-Mills theory: Hilbert space of a trivalent vertex

The construction of gauge-invariant states of SU(3) lattice gauge theories has garnered new interest in recent years, but implementing them is complicated by the need for SU(3) Clebsch-Gordon coefficients. In the loop-string-hadron (LSH) approach to lattice gauge theories, the elementary excitations are strictly gauge invariant, and constructing the basis requires no knowledge of Clebsch-Gordon coefficients. Originally developed for SU(2), the LSH formulation was recently generalized to SU(3), but limited to one spatial dimension. In this work, we generalize the LSH approach to constructing the basis of SU(3) gauge-invariant states at a trivalent vertex—the essential building block to multidimensional space. A direct generalization from the SU(2) vertex yields a legitimate basis; however, in certain sectors of the Hilbert space, the naive LSH basis vectors so defined suffer from being nonorthogonal. The issues with orthogonality are directly related to the “missing label” or “outer multiplicity” problem associated with SU(3) tensor products and may also be phrased in terms of Littlewood-Richardson coefficients or the need for a “seventh Casimir” operator. The states that are unaffected by the problem are orthonormalized in closed form. For the sectors that are afflicted, we discuss the nonorthogonal bases and their orthogonalization. A few candidates for seventh Casimir operators are readily constructed from the suite of LSH gauge-singlet operators. The diagonalization of a seventh Casimir represents one prescriptive solution toward obtaining a complete orthonormal basis, but a closed-form general solution remains to be found. Published by the American Physical Society 2025

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2019

Estimation of full-field, full-order experimental modal model of cable vibration from digital video measurements with physics-guided unsupervised machine learning and computer vision

Cables are critical components for a variety of structures such as stay cables and suspenders of cable-stayed bridges and suspension bridges. When in operational service, they are vulnerable to cumulative fatigue damage induced by dynamic loads (e.g., the cyclic vehicle loads and wind excitation). To accurately analyze and predict their dynamics behaviors and performance that could be spatially local and temporal transient, it is essential to perform high-resolution vibration measurements, from which their dynamics properties are identified and, subsequently, a high spatial resolution, full-modal-order dynamics model of cable vibration can be established. In this study, we develop a physics-guided, unsupervised machine learning-based video processing approach that can blindly and efficiently extract the full-field (as many points as the pixel number of the video frame) modal parameters of cable vibration using only the video of an operating (output-only) cable. In particular, by incorporating the physics of cable vibration (taut string model), a novel automated modal motion filtering method is proposed to enable autonomous identification of full-order (as many modes as possible) dynamic parameters, including those weakly excited modes that used to be challenging to identify in operational modal analysis. Therefore, a full-field, full-order modal model of cable vibration is established by the proposed method. Furthermore, this new approach provides a low-cost and noncontact technique to estimate the cable tension using only the video of the vibrating cable where the fundamental frequency is automatically and efficiently estimated to compute the cable tension according to the taut string equation. Laboratory experiments on a bench-scale cable are conducted to validate the developed approach.

42 ENGINEERING↗

DOE OSTI2017

Systems and methods for automatically identifying and linking names in digital resources

The present invention provides systems and methods for automatically identifying name-like-strings in digital resources, matching these name-like-string against a set of names held in an expertly curated database, and for those name-like-strings found in said database, enhancing the content by associating additional matter with the name, wherein said matter includes information about the names that is held within said database and pointers to other digital resources which include the same name and it synonyms.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗

DOE OSTI2019

Systems and methods for automatically identifying and linking names in digital resources

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗

DOE OSTI2021

Systems and methods for automatically identifying and linking names in digital resources

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2020

Advanced diagnostics to evaluate heterogeneity in lithium-ion battery modules

Battery packs for electric and stationary applications experience varied operating conditions, including abuse—e.g., fast charging, overcharging, thermal, vibration, shock, etc.—throughout their lifetimes. Innovative diagnostic tools and algorithms that go beyond single cells and deal with modules and packs are essential for early detection of off-normal issues. High-resolution tools with known detection limits are key to developing appropriate mitigation strategies. With the advent of rapid impedance spectroscopy that can generate a broadband impedance spectrum in ~10 sec, the case for impedance-based diagnostics that can be readily aligned with other methods, such as incremental capacity or dQ.dV -1 , has become promising. This study used the aforementioned diagnostic methods to identify realistic in-vehicle battery abnormalities (e.g., localized self-discharge and non-uniform aging), in series (up to 10S) and parallel (4P) strings, using 16 Ah graphite/NMC cells. The impedance-based diagnostic is found to be sensitive to the string size and state. Depending on the type of abnormality, detection frequency varied. The dQ.dV -1 method showed the potential to detect long-term aging-related heterogeneity in modules. In general, both the impedance and dQ.dV -1 methods were able to detect series strings’ abnormalities, but struggled to find those issues within parallel modules.

25 ENERGY STORAGE↗

DOE OSTI2016

Controversy of the GRO J1655-40 black hole mass and spin estimates and its possible solutions

Estimates of the black hole mass M and the dimensionless spin a in the microquasar GRO J1655-40 implied by strong gravity effects related to the timing and spectral measurements are controversial, if the mass restriction determined by the dynamics related to independent optical measurements, M {sub opt} = (5.4 ± 0.3) M {sub ⊙}, is applied. The timing measurements of twin high-frequency (HF) quasiperiodic oscillations (QPOs) with the frequency ratio 3:2 and the simultaneously observed low-frequency (LF) QPO imply spin in the range a∈(0.27--0.29) if models based on the frequencies of geodesic epicyclic motion are used to fit the timing measurements, and the correlated creation of the twin HF QPOs and the LF QPO at a common radius is assumed. On the other hand, the spectral continuum method implies a∈(0.65--0.75), and the Fe-line-profile method implies a∈(0.94--0.98). This controversy can be cured if we abandon the assumption of the occurrence of the twin HF QPOs and the simultaneously observed LF QPO at a common radius. We demonstrate that the epicyclic resonance model of the twin HF QPOs is able to predict the spin in agreement with the Fe-profile method, but no model based on the geodesic epicyclic frequencies can be in agreement with the spectral continuum method. We also show that the non-geodesic string loop oscillation model of twin HF QPOs predicts spin a > 0.3 under the optical measurement limit on the black hole mass, which is in agreement with both the spectral continuum and Fe-profile methods.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2025

String instability mitigation of adaptive cruise control without modifying control laws: trajectory shaper and parameter estimation

Vehicle automation technologies equip vehicles with adaptive cruise control (ACC) systems, which relieve driving fatigue. However, recent studies have shown that the current ACC systems are string-unstable (i.e., exacerbate traffic congestion). To achieve string stability, most existing studies directly modify the control algorithms of ACC systems. Alternatively, this study proposes a trajectory shaper (TS)-based method, which only modifies the trajectory information of the predecessor vehicle, so that the ego vehicle driven by a string-unstable ACC system leverages the modified trajectory information to achieve string stability. To devise the TS-based method, an offline-online parameter estimation method integrating batch optimization and an extended Kalman filter is applied to estimate the parameters of an ACC system. The proposed TS-based method is cost-effective during implementation, as it avoids modifying existing ACC control algorithms (which entails a complex analysis of control systems and parameter tuning). In conclusion, the effectiveness of the proposed TS-based method is validated through extensive numerical experiments.

33 ADVANCED PROPULSION SYSTEMS↗

DOE OSTI2017

Lateral pressure profile in lipid membranes with curvature: Analytical calculation

An analytical expression is obtained for the lateral pressure profile in the hydrophobic part of a lipid bilayer of finite curvature. Calculations are carried out within a microscopic model of a lipid bilayer, according to which the energy of a lipid chain represents the energy of a flexible string of finite thickness and the interaction between lipid chains is considered as a steric (entropic) repulsion. This microscopic model allows one to obtain an expression for the distribution of lateral pressure in membranes with given curvature if one considers the bending of a membrane as a small deviation from a flat conformation and applies perturbation theory in the small parameter L{sub 0}J, where L{sub 0} is the hydrophobic thickness of a monolayer and J is the mean curvature of the lipid bilayer. The resulting pressure profile depends on the microscopic parameters of the lipid chain: the bending modulus of the lipid chain, incompressible area per lipid chain, and the thickness of a flat monolayer. The coefficient of entropic repulsion between lipids is calculated self-consistently. The analytical results obtained for the lateral pressure distribution are in qualitative agreement with molecular dynamic simulations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2017

Novel Short-Circuit Detection in Li-ion Battery Architectures

Industry and the battery research community don’t have accurate and affordable methods to predict catastrophic battery failures. Recently we published a new method of early detection of nascent internal shorts that are precursors to catastrophic failure. This present work was performed to determine the methods short detection capability within battery architectures consisting of two parallel strings with up to four cells in the string. It was found that detection sensitivity is a function of the number of healthy versus compromised cells in the architecture and placement of the measuring device. The method allows one to locate shorted cells without disconnecting cells or loads from the battery architecture.

25 ENERGY STORAGE↗

DOE OSTI2015

Deep Borehole Disposal Remediation Costs for Off-Normal Outcomes

This memo describes rough-order-of-magnitude (ROM) cost estimates for a set of off-normal (accident) scenarios, as defined for two waste package emplacement method options for deep borehole disposal: drill-string and wireline. It summarizes the different scenarios and the assumptions made for each, with respect to fishing, decontamination, remediation, etc.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DOE OSTI2025

Characterizing the hadronization of parton showers using the HOMER method

We update the HOMER method, a technique to solve a restricted version of the inverse problem of hadronization – extracting the Lund string fragmentation function f(z) from data using only observable information. Here, we demonstrate its utility by extracting f(z) from synthetic Pythia simulations using high-level observables constructed on an event-by-event basis, such as multiplicities and shape variables. Four cases of increasing complexity are considered, corresponding to e + e − collisions at a center-of-mass energy of 90 ≥ v producing either a string stretched between a $q$ and $\bar{q}$ containing no gluons; the same string containing one gluon g with fixed kinematics; the same but the gluon has varying kinematics; and the most realistic case, strings with an unrestricted number of gluons that is the end-result of a parton shower. We demonstrate the extraction of f(z) in each case, with the result of only a relatively modest degradation in performance of the HOMER method with the increased complexity of the string system.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2016

Two-particle correlation function and dihadron correlation approach

It is shown that, in the case of asymmetric nuclear interactions, the application of the traditional dihadron correlation approach to determining a two-particle correlation function C may lead to a form distorted in relation to the canonical pair correlation function {sub C}{sup 2}. This result was obtained both by means of exact analytic calculations of correlation functions within a simple string model for proton–nucleus and deuteron–nucleus collisions and by means of Monte Carlo simulations based on employing the HIJING event generator. It is also shown that the method based on studying multiplicity correlations in two narrow observation windows separated in rapidity makes it possible to determine correctly the canonical pair correlation function C{sub 2} for all cases, including the case where the rapidity distribution of product particles is not uniform.

74 ATOMIC AND MOLECULAR PHYSICS↗