Search NASA⌕ Search

SEARCH · Search NASA

Results for “superfluid helium”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

Infrared Astronomical Satellite (IRAS) superfluid helium tank temperature control

The infrared detectors on the Infrared Astronomical Satellite (IRAS), which was placed into a polar orbit in January 1983, are cooled to a temperature of less than 3 K by thermal coupling to the main cryogenic tank (MCT) containing superfluid helium. A porous plug built into the vent line entrance acts as a superfluid helium liquid/vapor separator in zero gravity. A description of the IRAS MCT flight porous plug is presented, and tests of the plug in situ are discussed, taking into account submerged plug tests, a restart test, and a cold vapor flow test. Aspects of flow rate determination in the case of an unavailability of flight flow rate data are also considered.

Petrac, D.↗
NASA NTRS1980

Superfluid helium film in zero gravity

The behaviour of nearly-saturated superfluid helium films several hundred Angstroms thick was investigated under zero gravity conditions in a small cryostat carried on a 0.3 m diameter, 3 m long sounding rocket, using a quartz microbalance technique. The flight provided 30 s of high acceleration, about 5 min. of zero gravity, and 90 s of mg acceleration. The temperature of the experiment ranged from 1.67 to 2.15 K. In contrast to ground test results, thick films uniformly distributed on all surfaces were observed in zero gravity.

Yang, L. C.↗
NASA NTRS1981

Characterization of superfluid helium transfer

The friction factor and steady state flow rate of superfluid helium (He II) are measured, with the driving pressure difference generated by the saturated vapor pressure and a small hydrostatic pressure head. The temperature ranged from 1.5 K to the transition temperature of 2.17 K. Three different lengths and two different internal diameters were used for the stainless steel transfer tubes, and the transfer of liquid helium (He I) was investigated with the same apparatus for comparison. It was found that the friction factor of He II is greater than that of He I for pressure differences greater than 20 mm Hg, and smaller below that magnitude.

Yang, L. C.↗
NASA NTRS1989

Performance of all-metal demountable cryogenic seals at superfluid helium temperatures

Two all-metal demountable cryogenic seals with an outside diameter of 36.6 mm, inside diameter of 27.2 mm, and thickness of 0.51 mm were leak-tested at room temperature (300 K), liquid nitrogen temperature (21 cycles at 77 K), liquid helium temperature (9 cycles at 4.2 K), and superfluid helium temperature (4 cycles at 1.6 K). Each seal was mounted and demounted for 13 cycles. Thickness measurements at 90 deg intervals along the circumference showed a maximum seal compression of 0.038 mm. Leak-rate measurements at all temperatures showed no detectable leak above the helium background level, typically 0.1 x 10(-9) std-cc/sec, during testing.

Salerno, Louis J.↗
NASA NTRS1991

Performance of all-metal demountable cryogenic seals at superfluid helium temperatures

Two all-metal demountable cryogenic seals with an outside diameter of 36.6 mm, inside diameter of 27.2 mm and thickness of 0.51 mm were leak-tested at room temperature (300 K), liquid nitrogen temperature (21 cycles at 77 K), liquid helium temperature (nine cycles at 4.2K) and superfluid helium temperature (four cycles at 1.6 K). Each seal was mounted and demounted for 13 cycles. Thickness measurements at 90 deg intervals along the circumference showed a maximum seal compression of 0.038 mm. Leak rate measurements at all temperatures showed no detectable leak above the helium background level, typically 0.1 x 10 exp -9 std cu cm/s, during testing.

Salerno, L. J.↗
NASA NTRS1988

Superfluid Helium Tanker (SFHT) study

The accomplishments and recommendations of the two-phase Superfluid Helium Tanker (SFHT) study are presented. During the first phase of the study, the emphasis was on defining a comprehensive set of user requirements, establishing SFHT interface parameters and design requirements, and selecting a fluid subsystem design concept. During the second phase, an overall system design concept was constructed based on appropriate analyses and more detailed definition of requirements. Modifications needed to extend the baseline for use with cryogens other than SFHT have been determined, and technology development needs related to the recommended design have been assessed.

Source record↗
NASA NTRS1988

Superfluid Helium On-Orbit Transfer Flight Experiment - Performance estimates

Several components on the Superfluid Helium On-Orbit Transfer Flight Experiment are analyzed with respect to expected performance. The interaction of the components is then used to calculate an expected transfer efficiency. Steady state conditions are assumed. Transfer efficiencies based on the thermomechanical pump range from 96 to 99 percent plus. Transfer line parasitics lead to lower efficiencies at low flow rates.

Dipirro, M. J.↗
NASA NTRS1985

Design of the superfluid helium dewar for the Cosmic Background Explorer (COBE)

Design features of the 664-liter superfluid helium dewar to be used for the Cosmic Background Explorer (COBE) are described, with emphasis on the similarities and differences vis a vis the Infrared Astronomical Satellite (IRAS) dewar. The dewar (23 percent larger than the IRAS dewar) is intended to provide a 14-month operating lifetime (vs. 10 months for IRAS). A far infrared absolute spectrophotometer (FIRAS) and diffuse infrared background experiment (DIRBE) will conduct full sky surveys over the wavelength region from 1 micron to 1 centimeter. Launch into a 900-km sun-synchronous polar orbit is scheduled for the autumn of 1987.

Hopkins, R. A.↗
NASA NTRS1989

Design considerations for a micro-g superfluid helium fluid acquisition system

The general description, the operation, and the design of a superfluid helium (SFHe) fluid acquisition system (FAS) for use under microgravity conditions is presented. For the type of FAS considered here, where fine-mesh woven screens are used to retain flowing SFHe within a gallery arm (flow) channel, those forces which determine the flow dynamics are the micro-g accelerations, liquid surface tension, and tensile strength and cumulative pressure drops along a flow path that begins at the bulk liquid and ends at the entrance to a pump. For this case, the dimensionless number, N(T) is written as the ratio between the pressure drop across the screen and the surface tension forces at the screen for low fluid velocities. Static Bond number measurements have bene taken for SFHe using 325 x 2300 twilled Dutch screen and have indicated a screen pore hydraulic radius of 0.00031 cm.

Lee, J. M.↗
NASA NTRS1990

A design and critical technology issues for on-orbit resupply of superfluid helium

The issues of and the solutions to the critical design and technology areas of the Superfluid Helium On-Orbit Transfer (SHOOT) experiment, presently under development at the NASA Goddard Spaceflight Center, are discussed. Special attention is given to the SHOOT design requirements for the 10,000-liter superfluid He resupply tanker system, the concept details of the system, and the resupply operations and their analysis. A block diagram of the SHOOT system is included along with fluid management schematic and configuration diagrams of the system and its subsystems. A summary of the dewar performance is also presented.

Hopkins, Richard A.↗
NASA NTRS1988

Mechanical pumps for superfluid helium transfer in space

Two alternate mechanical pump concepts have been identified for the transfer of superfluid helium in space. Both pumps provide flow at sufficient head and have operating characteristics suitable for the Space Infrared Telescope Facility (SIRTF) refill mission. One pump operates at a relatively low speed and utilizes mechanical roller bearings, while the other operates at a higher rotational speed using either electromagnetic or tilting pad gas-dynamic bearings. The use of gas bearings requires transfer of normal helium so that the gas pressure within the pump casing is high enough to operate the bearings. The operating characteristics of both pumps are predicted, the dimensions are estimated and major technology issues are identified. The major issues for each pump design are cavitation performance and bearing development. Roller bearings require quantified reliability for operation in space while electromagnetic bearings require basic development as well as a complex control system. The low speed pump has significantly poorer hydraulic efficiency than the high speed pump.

Izenson, M. G.↗
NASA NTRS1983

A Report on Superfluid Helium Flow Through Porous Plugs for Space Science Applications

As a background for the study of the nature of superfluid helium flow through porous plugs for other space science uses, preliminary tests on various plugs of a given material, diameter, height, and filtration grade have been performed. Two characteristics of the plugs, pore size and number of channels, have been determined by the bubble test and warm flow test of helium gas through the plugs, respectively. Tests on the flow of He II through the plugs have also been performed. An obvious feature of the results of these tests is that for isothermal measurements of pressure versus mass flow rate below approximately 2.10 K, the flow is separated into two different regimes, indicative of the occurrence of a critical phenomenon.

Mason, F. C.↗
NASA NTRS1990

Computer based control of the Superfluid Helium On-Orbit Transfer Space Shuttle experiment

Ground software that is being developed for the control of the Superfluid Helium On-Orbit Transfer (SHOOT) project is discussed. Special attention is given to two software development projects for SHOOT support: (1) the SHOOT Command and Monitoring System, which will provide a real-time highly interactive interface for the SHOOT principal investigator to control the experiment and to analyze and display its telemetry; and (2) the SHOOT Aft Flight Deck Operating System, which is comprised of several monitoring programs to give the astronaut mission specialist on-orbit visibility into SHOOT systems, and an intelligent-rule-based system that will control a He transfer without ground intervention. Major accomplishments of the SHOOT project to date include two successful interface tests with the Goddard Space Flight Center developed breadboard electronics and prototype software.

Castellano, T. P.↗
NASA NTRS2001

Dynamics and Morphology of Superfluid Helium Drops in a Microgravity Environment

We developed an apparatus that makes it possible to observe and study magnetically levitated drops of superfluid helium. The force on a diamagnetic substance in a magnetic field is proportional to the gradient of the square of the magnetic field B. For the magnetic force on helium to be equal to the gravitational force on Earth, it is necessary for the product of B with the field gradient dB/d z to be 21.5 T(exp 2)/cm. In addition, in order for the magnetic field to provide a stable trap, the value of B(exp 2) must increase in all directions in the horizontal plane that passes through the point where the field/field gradient product in the vertical direction has the critical value of 21.5 T(exp 2)/cm. A specially designed superconducting magnet that meets these specifications has been installed in a large helium dewar with optical access. Helium drops levitated by the magnet can be viewed along the axis of the solenoid. The sample chamber within the bore of the magnet is thermally isolated from the magnet and helium reservoir. Its temperature can be varied between 4 and 0.5 K, the lower part of the range being reached using a He-3 refrigerator. Liquid helium can be injected into the magnetic trap using a small capillary. Once a drop is contained in the trap it can be held there indefinitely. With this apparatus we have conducted a number of different types of experiments on helium drops so as to gain information necessary for performing experiments in space. With magnetically levitated drops we are limited to working with drops of 1 cm. or less in diameter. The shape of the drops larger than a few mm diameter can be distorted by the profile of the magnetic field. The study of phenomena such as the initial motion of the surfaces of two drops as they just make contact, requires the use large drops to resolve the behavior of interest. We have performed a detailed investigation of the shape oscillations of superfluid drops.

Seidel, George M.↗
NASA NTRS1981

Superfluid helium leak sealant study

Twenty-one leak specimens were fabricated in the ends of stainless steel and aluminum tubes. Eighteen of these tubes were coated with a copolymer material to seal the leak. The other three specimens were left uncoated and served as control specimens. All 21 tubes were cold shocked in liquid helium 50 times and then the leak rate was measured while the tubes were submerged in superfluid helium at 1.7 K. During the cold shocks two of the coated specimens were mechanically damaged and eliminated from the test program. Of the remaining 16 coated specimens one suffered a total coating failure and resulting high leak rate. Another three of the coated specimens suffered partial coating failures. The leak rates of the uncoated specimens were also measured and reported. The significance of various leak rates is discussed in view of the infrared astronomical satellite (IRAS) Dewar performance.

Vorreiter, J. W.↗
NASA NTRS1988

The superfluid helium on-orbit transfer (SHOOT) flight experiment

The SHOOT flight demonstration is being undertaken to verify component and system level technology necessary to resupply large superfluid helium dewars in space. The baseline configuration uses two identical 210 liter dewars connected by a transfer line which contains a quick disconnect coupling. The helium will be transferred back and forth between the dewars under various conditions of flow rate, parasitic heat load, and temperature. An astronaut Extra-vehicular Activity (EVA) is also planned to manually demate and mate the coupling. A number of components necessary for the flight are being developed. These components are described here.

Dipirro, Michael J.↗
NASA NTRS1988

Temperature rise in superfluid helium pumps

The temperature rise of a fountain effect pump (FEP) and of a centrifugal pump (CP) are compared. Calculations and estimates presented here show that under the operating conditions expected during the resupply of superfluid helium in space, a centrifugal pump will produce a smaller temperature rise than will a fountain effect pump. The temperature rise for the FEP is calculated assuming an ideal pump, while the temperature rise of the CP is estimated from the measured performance of a prototype pump. As a result of this smaller temperature rise and of the different operating characteristics of the two types of pumps, transfers will be more effective using a centrifugal pump.

Kittel, Peter↗
NASA NTRS1988

Cryogenic and thermal design for the Superfluid Helium On-Orbit Transfer (SHOOT) experiment

The analysis and trade-offs of the external thermal design of the two 200-liter dewars required in the SHOOT experiment to extend space mission life by superfluid helium replenishment are discussed. Also considered are the support electronics and the optimization and prediction of the performance of the dewar and cryostat assemblies. Particular attention is given to the ground-hold and standby performance of the dewars, along with the temperature of the helium bath during high-flow-rate helium transfers.

Lee, J. H.↗