Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface morphologies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Phosphorus incorporation during Si(001):P gas-source molecular beam epitaxy: Effects on growth kinetics and surface morphology

The effects of P doping on growth kinetics and surface morphological evolution during Si(001):P gas-source molecular beam epitaxy from Si{sub 2}H{sub 6} and PH{sub 3} at temperatures T{sub s}=500-900 deg. C have been investigated. With increasing PH{sub 3}/Si{sub 2}H{sub 6} flux ratio J{sub P/Si} at constant T{sub s}, we observe a decrease in the film growth rate R and an increase in the incorporated P concentration C{sub P}, both of which tend toward saturation at high flux ratios, which is accompanied by increased surface roughening and pit formation. At constant J{sub P/Si}, R increases with increasing T{sub s}, while C{sub P} initially increases, reaches a maximum at T{sub s}=700 deg. C, and then decreases at higher growth temperatures. We use in situ isotopically tagged D{sub 2} temperature programed desorption (TPD) to follow changes in film surface composition and dangling bond density {theta}{sub db} as a function of J{sub P/Si} and T{sub s}. Measurements are carried out on both as-deposited Si(001):P layers and P-adsorbed Si(001) surfaces revealing {beta}{sub 1} and {beta}{sub 2} peaks due to D{sub 2} desorption from Si monohydride and dihydride species, respectively, as well as the formation of a third peak {beta}{sub 3} corresponding to D{sub 2} desorption from mixed Si-P dimers. Dissociative PH{sub 3} adsorption on Si(001) results in a decrease in {theta}{sub db} and an initial increase in P surface coverage {theta}{sub P} with increasing T{sub s}. Saturation {theta}{sub P} values reach a maximum of {approx}1 ML at T{sub s}=550 deg. C, and decrease with T{sub s}>600 deg. C due to the onset of P{sub 2} desorption. Comparison of {theta}{sub P}(T{sub s}) results obtained during film growth with postdeposition C{sub P}(T{sub s}) results reveals the presence of strong P surface segregation. From measurements of {theta}{sub P} versus C{sub P} in Si(001):P layers grown as a function of T{sub s}, we obtain a P segregation enthalpy {delta}H{sub s}=-0.86 eV. By using the combined set of results, we develop a predictive model for C{sub P} versus T{sub s} and, J{sub P/Si} incorporating the dependence of the PH{sub 3} reactive sticking probability S{sub PH{sub 3}} on {theta}{sub P}, which provides an excellent fit to the experimental data.

36 MATERIALS SCIENCE↗

Effect of annealing temperature on the surface morphology and electrical properties of aluminum doped zinc oxide thin films prepared by sol-gel spin-coating method

Aluminum doped zinc oxide thin films were prepared through sol gel and spin coating technique from zinc acetate dihydrate and aluminum nitrate nanohydrate in alcoholic solution. The electrical properties and surface morphology study are investigated for the thin films annealed at 350{approx}500 deg. C. Zinc oxide thin films deposited on glass and silicon substrates were characterized using electron microscopy (SEM) and current-voltage (I-V) measurement scanning for surface morphology and electrical properties study respectively. The SEM investigation shows that zinc oxide thin films are denser at higher annealing temperature. The result indicates electrical properties of aluminum doped zinc oxide thin films are improved with annealing temperatures. The resistivity of aluminum doped zinc oxide thin films are decreased with annealing temperature up to 500 deg. C.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Surface morphology and electrical transport of rapid thermal annealed chromium-doped indium zinc oxides: The influence of zinc interstitials and out-diffusion

We investigate the complex impedance (CI) spectra of chromium-doped indium zinc oxide (CIZO) films with different rapid thermal annealing (RTA) temperatures. The CI spectra drawn from the impedance contributions of Zn-O and In-O bondings in CIZO films were analyzed by two sets of parallel resistance and capacitance components in series. The result demonstrates that zinc interstitials controls electron concentration and transition of electrical transport from semiconducting to metallic. At higher RTA temperature, high-density zinc interstitial promotes Zn atom diffusion from the surface, modifying surface morphology.

36 MATERIALS SCIENCE↗

Effect of annealing on the growth dynamics of ZnPc LB thin film and its surface morphology

The ZnPc molecules in the thin film prepared by Langmuir-Blodgett (LB) process in asdeposited state has been found to have an edge on orientation with average tilt angle of 64.3 ° as confirmed from the Pressure-Area (π-A) isotherm and X-ray diffraction (XRD) study. The ZnPc LB thin film has been observed to have abnormal growth mode at higher annealing temperature and it is mainly driven by minimization of surface free energy which lead to large increase in crystallinity of the film. Kinetically favored orientational and structural transitions of ZnPc thin film during annealing and their effect on the surface morphology of the thin film has been studied using scaling concepts. The scaling exponents 1) root mean square (RMS) roughness σ, 2) roughness exponent α and, 3) in plane correlation length ξ are calculated from the HDCF g(r) and ACF C(r). The RMS surface roughness σ is found to be dependent on the as defined short wavelength undulations (ρ) and long wavelength undulations (χ). Both ρ and χ are the function of all the three scaling exponents. σ has been observed to be maximum for the ZnPc thin film annealed at 290 °C, since the χ shoot to maximum value at this temperature due to the formation of small domains of ZnPc nanorods. The self affinity of the ZnPc thin film is found to decrease on annealing as obtained from both power spectral density (PSD) and HDCF g(R) and ACF C(R) study, which confirms that the dimension of surface morphology of the ZnPc LB thin film transform towards 2D with increase in annealing temperature.

36 MATERIALS SCIENCE↗

Influence of heavier impurity deposition on surface morphology development and sputtering behavior explored in multiple linear plasma devices

Surface morphology development and sputtering behavior of Cr, as a test material, have been explored under He plasma exposure at a low incident ion energy of ~80 eV in multiple linear plasma devices: PISCES-A, PSI-2, and NAGDIS-II. From comparison of the experiments in these devices, deposition of a small amount of heavier impurities (Mo in NAGDIS-II and Ta in PISCES-A) onto Cr is found to result in the formation of cone structures on the Cr surface due to preferential sputtering, resulting in a significant reduction (up to ~10 times) in the sputtering yield of Cr due to line-of-sight redeposition onto the neighboring cones. The heavier impurities are thought to originate from a sample holding cap/cover, which can be sputtered by a trace amount of intrinsic impurities (C, O, etc) as well as by Cr ionized in the plasma. It can be concluded from the Cr experiments, as well as additional Be data collected in PISCES-B, that heavier impurity deposition plays a major role in the cone structure formation, while other mechanisms (e.g. surface irregularity and oxide) also exist.

36 MATERIALS SCIENCE↗

Surface Morphology and Topology of TiO{sub 2} Nanocoating on Metal Substrates at Different Molar Concentrations and Speed

Mild steel is low carbon steel content of carbon less than 0.25 wt%. This type of steels is low cost to produce while has good toughness and outstanding ductility. Nanocoated mild steel surface is greatly many applications such as in automobile body component, pipelines, wall of operation's room and operation's theatre. Anatase TiO{sub 2} coating were successfully synthesized by optimize the sol-gel solution wherein glacial acetic acid and controlling of annealing temperature. In this paper initial study of TiO{sub 2} nanocoating on mild steel surface was presented. TiO{sub 2} nanocoating was prepared by spin coating technique. Spin coating technique is low processing temperature and ease of compositional modifications. The sol-gel concentration and speed (rpm) of spin coating were varied to produce different surface morphology and topology of samples. The surface phase, morphology and topology of coating were investigated by X-ray diffraction (XRD), Field Emission Scanning Electron Microscopy (FESEM) and Atomic Force Microscopy (AFM) while the roughness of coating was determined by Surface Profiler (SP).

36 MATERIALS SCIENCE↗

Metalorganic chemical vapor deposition of ZnGeN 2 films on GaN: effects of cation stoichiometry on surface morphology and crystallinity

Novel optoelectronic device designs based on the heterostructures of III-N and II-IV-N 2 are promising to advance device performance significantly. For example, by utilizing InGaN-ZnGeN 2 quantum well (QW) structures instead of pure InGaN, the band structure engineering in the QW active region can lead to improved electron-hole wavefunction overlap, and thus enhance the radiative efficiency for photon generation. These novel heterostructures have great potential to address the current challenge of low quantum efficiency in InGaN QW based light emitting diodes emitting in green and beyond. The materials development of ZnGeN 2 is still at an early stage as compared to the much matured GaN material system. In an ideal octet rule preserving ordered structure of ZnGeN 2 , every N atom is coordinated by exactly two Zn and two Ge atoms. However, local violation of octet rule can be caused by non-ideal coordination of N by the cations. The disordered structure is thermodynamically less favorable but can still be achieved, for example, in kinetics-limited growth regime. The ordered ZnGeN 2 has a bandgap very close to that of GaN (~3.4 eV) and a lattice mismatch of <0.1% with GaN. Interestingly, the valence band of ZnGeN 2 has been predicted to be ~1 eV above that of GaN, which has inspired novel designs for high efficiency light emitters. In this work, we investigated the metalorganic chemical vapor deposition (MOCVD) of ZnGeN 2 films on GaN/c-sapphire templates. Diethylzinc (DEZn), germane (GeH4) and ammonia were used as the precursors for Zn, Ge and N, respectively. A systematic study was conducted to investigate the cation stoichiometry as a function of growth temperature (TG), total reactor pressure (P) and DEZn/GeH 4 molar flow rate ratio (RII/IV). Under the investigated growth window, the Zn/(Zn+Ge) composition in the films, determined from energy dispersive X-ray spectroscopy, decreased monotonically with increase in TG but increased with increase in P and RII/IV. Atom probe tomography data did not indicate the presence of any secondary phases such as Zn 3 N 2 or Ge 3 N 4 . The surface morphology and crystallinity of the grown films had strong correlation with the Zn/(Zn+Ge) composition. The scanning electron microscopy images showed that the near-stoichiometric films have planar surfaces whereas Zn-rich films had crystallites on their surface and the Zn-poor films had faceted surface. Scanning transmission electron microscopy (STEM) imaging revealed that the Zn-rich and Zn-poor films have columnar and filament-like morphology, respectively, whereas the near-stoichiometric films have continuous film-like cross-sectional morphology. TEM nano-diffraction patterns as well as X-ray diffraction 2θ-ω scan profiles indicate that the near stoichiometric films are single crystalline. Nano-diffraction pattern of the stoichiometric films resembled that of a disordered ZnGeN 2 structure. Room temperature Raman spectra of near-stoichiometric films showed only the phonon density of states like features of a cation disordered ZnGeN 2 . Cathodoluminescence and photoluminescence spectra measured at different temperatures had similar features with peak emission wavelength at ~ 2 eV. In conclusion, the stoichiometry of ZnGeN 2 films can be widely tuned by tuning the MOCVD growth parameters. The surface morphology and the crystallinity of the films were found to have strong correlation with the Zn/(Zn+Ge) composition. The stoichiometric ZnGeN 2 films grown on GaN were demonstrated with uniform surface morphology and high crystalline quality. The results from this work will provide pathway to implement ZnGeN 2 in device structures.

Karim, Md Rezaul↗

Structure and features of the surface morphology of A{sup 4}B{sup 6} chalcogenide epitaxial films

The structure and features of the surface morphology of Pb{sub 1-x}Mn{sub x}Se (x = 0.03) epitaxial films grown on freshly cleaved BaF{sub 2}(111) faces and PbSe{sub 1-x}S{sub x}(100) (x = 0.12) single-crystal wafers were investigated by molecular beam condensation and the hot-wall method. It is shown that the epitaxial films, in accordance with the data in the literature for other chalcogenides, grow in the (111) and (100) planes, repeating the substrate orientation. Black aggregates are observed on the film surface of the films grown. The results obtained are compared with the data in the literature and generalized for other chalcogenides: A{sup 4}B{sup 6}:Pb (S, Se, Te); Pb{sub 1-x}Sn{sub x} (S, Se, Te); and Pb{sub 1-x}Mn (Se, Te). It is established that the formation of black aggregates, which are second-phase inclusions on the surface of epitaxial films obtained by vacuum thermal deposition, is characteristic of narrow-gap A{sup 4}B{sup 6} chalcogenides.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Interrelation of the construction of the metamorphic InAlAs/InGaAs nanoheterostructures with the InAs content in the active layer of 76-100% with their surface morphology and electrical properties

The influence of the construction of a metamorphic buffer on the surface morphology and electrical properties of InAlAs/InGaAs/InAlAs nanoheterostructures with InAs content in the active layer from 76 to 100% with the use of the GaAs and InP substrates is studied. It is shown that such parameters as the electron mobility and the concentration, as well as the root-mean-square surface roughness, substantially depend on the construction of the metamorphic buffer. It is established experimentally that these parameters largely depend on the maximal local gradient of the lattice constant of the metamorphic buffer in the growth direction of the layers rather than on its average value. It is shown that, with selection of the construction of the metamorphic buffer, it is possible to form nanostructured surfaces with a large-periodic profile.

36 MATERIALS SCIENCE↗

Electrical and Surface Morphology of Polyvinylchloride Composites Filled with Aluminum Powder

In this work, the electrical and surface morphology of polyvinyl chloride (PVC) composites filled with different concentration of aluminum powder varying from 0 to 40 wt.% have been prepared by solution costing method. The electrical conductivity of these composites were investigated in the frequency range 100 Hz-10 MHz at room temperature. The conductivity of the composites system exhibited a strong frequency dependence particularly in the vicinity of percolation threshold (20 wt.%). It was observed that the electrical conductivity gradually increased with filler concentration and frequency and explained in terms of hopping conduction mechanism. The electrical conductivity of the composites obeys universal power law (i.e. {sigma} = Af{sup n}), where, n is power exponent. The scanning electron microscope (SEM) micrographs indicate the agglomeration of aluminum particles dispersed within the PVC at the higher aluminum concentration, yielding a conductive path through the composites. It is also corroborated with electrical conductivity result.

36 MATERIALS SCIENCE↗

Studying femtosecond-laser hyperdoping by controlling surface morphology

We study the fundamental properties of femtosecond-laser (fs-laser) hyperdoping by developing techniques to control the surface morphology following laser irradiation. By decoupling the formation of surface roughness from the doping process, we study the structural and electronic properties of fs-laser doped silicon. These experiments are a necessary step toward developing predictive models of the doping process. We use a single fs-laser pulse to dope silicon with sulfur, enabling quantitative secondary ion mass spectrometry, transmission electron microscopy, and Hall effect measurements. These measurements indicate that at laser fluences at or above 4 kJ m{sup -2}, a single laser pulse yields a sulfur dose >(3 {+-} 1) x 10{sup 13} cm{sup -2} and results in a 45-nm thick amorphous surface layer. Based on these results, we demonstrate a method for hyperdoping large areas of silicon without producing the surface roughness.

36 MATERIALS SCIENCE↗

Effect of anion-to-cation supplying ratio on the surface morphology of AlN films grown on ZnO substrates at low temperature

The authors investigated the evolution of surface morphology of AlN films grown on ZnO substrates at low temperature (LT) (400 deg. C) as a function of anion/cation supplying ratio (V/III ratio). Unlike the well-known favorable growth conditions for high-temperature growth, smooth-surface LT-AlN layers were obtained under the O-polar surface, stoichiometric, and N-rich conditions. LT-AlN layers revealed smooth surface (roughness in root mean square=0.20 nm for AlN on O-polar ZnO and 0.44 nm for AlN on Zn-polar ZnO) and quite low etch-pit density ({approx}2x10{sup 6} cm{sup -2} for AlN/Zn-polar ZnO).

36 MATERIALS SCIENCE↗

Transition Behavior of Surface Morphology Evolution of Si(100) During Low-Energy Normal-Incidence Ar+ Ion Bombardment

The temperature dependence of the surface morphology evolution during 1000 eV Ar{sup +} ion bombardment of Si(100) surfaces at normal incidence is studied in real time. At room temperature the surface is amorphized by the ion bombardment but remains smooth. Calculations suggest this may be due to ion impact induced lateral mass redistribution. However, at the fluxes used here, surface roughening occurs above 400 C, and in the range of 400 C to 500 C a transition region from amorphous to crystalline surface is observed. Above 500 C, the surface remains crystalline and the growing corrugations exhibit dynamic scaling with power law growth in amplitude and characteristic length scale. This behavior is characteristic of instabilities driven by surface diffusion processes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of Surface Morphology and Magnetic Impurities on the Electronic Structure in Cobalt-Doped BaFe 2 As 2 Superconductors

Combined scanning tunneling microscopy, spectroscopy, and local barrier height (LBH) studies show that low-temperature-cleaved optimally doped Ba(Fe 1–x Co x ) 2 As 2 crystals with x = 0.06, with T c = 22 K, have complicated morphologies. Although the cleavage surface and hence the morphologies are variable, the superconducting gap maps show the same gap widths and nanometer size inhomogeneities irrelevant to the morphology. Based on the spectroscopy and LBH maps, the bright patches and dark stripes in the morphologies are identified as Ba- and As-dominated surface terminations, respectively. Magnetic impurities, possibly due to Co or Fe atoms, are believed to create local in-gap state and, in addition, suppress the superconducting coherence peaks. Lastly, this study will clarify the confusion on the cleavage surface terminations of the Fe-based superconductors and its relation with the electronic structures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Helium flux effects on bubble growth and surface morphology in plasma-facing tungsten from large-scale molecular dynamics simulations

We investigate helium flux effects on helium transport and surface evolution in plasma-facing tungsten using molecular dynamics. The simulations span two orders of magnitude, from ITER-relevant levels to those more typical of simulations published to date. Simulation times of up to 2.5 µs (corresponding to actual fluences of 1.4 x 10 21 m -2 ) are achieved, revealing concerted bubble-bursting events that are responsible for significant and very sudden changes in surface morphology. The depth distribution of helium depends very strongly on helium flux: helium self-trapping becomes more probable near the surface at high flux, and a layer of near-surface bubbles forms. Helium retention prior to the onset of bubble bursting is also substantially lower at low flux than it is at high flux. Surface features at low fluence are correlated with the positions of bubbles, but at high fluence, bubbles tend to coalesce, venting to the surface at one or more locations and leaving large interconnected cavities below the surface. Ruptured bubbles may serve as pathways deeper into the material, allowing helium to bypass the layer of near-surface bubbles and fill deeper, potentially much larger, bubbles that can produce more substantial surface features. Deeper bubbles also emit prismatic dislocation loops that can fill in cavities closer to the surface. Our results suggest that nearly all molecular dynamics simulations published to date are hampered by finite-size effects, and that helium flux is a very important parameter in determining the behavior of helium in plasma-facing components.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Combined density functional theory/kinetic Monte Carlo investigation of surface morphology during cycling of Li-Cu electrodes

In this work, we employed a combined density functional theory and kinetic Monte Carlo approach in order to investigate the nanoscale behavior of lithium stripping and plating on lithium-copper nanoalloys. Density functional theory calculations were used to develop an atom-by-atom understanding of the nucleation behavior of lithium on copper surfaces with different surface morphologies. We found that nanometric pits resulted in significantly more favorable lithium deposition when compared to pristine or lightly-defective Cu surfaces, which is in agreement with previous experimental studies. We then used density functional theory and constrained ab initio molecular dynamics to develop interaction and reaction parameters for a larger-scale kinetic Monte Carlo model in order to provide insight into the stripping and plating behavior of nanostructured Li-Cu nanoalloy anodes. Substantial losses in capacity and strong indications of morphological change were observed for a wide range of Cu:Li ratios over 100 cycles. We observed a complex relationship between the nanoparticle composition and the properties of the formed solid-electrolyte interphase.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Modifications of Textured Silicon Surface Morphology and Its Effect on Poly-Si/SiO x Contact Passivation for Silicon Solar Cells

High-efficiency crystalline silicon (c -Si) solar cells require textured surfaces for efficient light trapping. However, passivation of a textured pyramidal surface to reduce carrier recombination is challenging due to the presence of sharp tips, edges, and valleys. Using electrical and surface microscopies combined with lifetime measurements, we report on the effect of HF:HNO3 etching on the pyramidal textured Si surface morphology, and on poly-Si/SiOx contact performance. Preferential rounding of either the valleys between pyramids, or the pyramid tips is obtained depending on the HF:HNO3 solution temperature. Both these morphologies make the pyramid shape irregular, with the pyramid faces no longer being predominantly a Si(111) surface. Our atomic force microscopy measurements further show that the nanoscale roughness over the pyramid face also reduces after HF:HNO3 etching. Thus, etching affects the microscopic pyramidal shape, the dominant crystallographic orientation, and the nanoscale roughness of the surface. We speculate that these three surface effects result in the improvement of surface passivation via poly-Si/SiOx contacts. However, this improved passivation is accompanied by increased reflectance of the HF:HNO3-etched textured surface. Finally, our electron-beam-induced current measurements reveal thickness nonuniformities in the thermally grown SiOx layer on the HF:HNO3-etched textured Si surface: SiO x is thicker near the pyramid tips, edges, and faces as compared with near the valleys between pyramids. This nonuniformity in the SiOx layer may explain the poorer passivation obtained on a KOH-textured and HF:HNO3-etched textured surface as compared with a planar surface.

14 SOLAR ENERGY↗

Variation of anode grid surface morphology and its effect on operation of a triode virtual cathode oscillator

After repeatedly operation of a triode virtual cathode oscillator, the surface morphology of anode grid is studied by a scanning electron microscope. It is found that there are many quasi-periodic sawteeth formed on the anode grid, which are about 300-500 {mu}m in height, {approx}200 {mu}m in width, and 150-200 {mu}m in period. The formation of this sawteeth implies that there is possible Rayleigh-Taylor-like instability on the anode grid during the irradiation by high-current relativistic electron beam. These sawteeth enhance the electric field on anode grid, leading to more feasible of anode plasma generation, and more rapidly expansion of that plasma. As a result, the electron transmissivity of anode grid is decreased, the output microwave power of the virtual cathode oscillator is lowered and its operational performance is degraded.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗