Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface radiative flux”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Two-color pyrometry based flame to fuel surface radiative heat flux diagnostic using flamelets

In this study, a non-intrusive two-color pyrometry based radiative heat flux diagnostic is presented that accounts for the self-absorption effects. This diagnostic relies on looking up the flame temperature and soot volume fraction using the ratio of color intensities obtained from digital cameras and numerical solutions of 1D steady-state diffusion flames. Virtual two color pyrometry of computed flame show a unique one-to-one mapping of strained flames with intensity ratio; thereby allowing flames to be indexed and creation of a two-color flamelet manifold (TCFM). The TCFM is a function of two variables; the ratio of red to green intensities (flame index) and physical distance to the stoichiometric surface defined using a level-set function. The developed diagnostic is used in upward flame spread experiments where an approximate flame hull reconstruction method is applied to provide the 3D level-set function and intensity ratio for use of TCFM to provide radiative absorption properties for 3D ray tracing. Accounting for self- absorption effects provide improved soot volume fraction estimates. In conclusion, the radiative heat flux estimates are found to be in very good agreement with literature and improved results are obtained near the flame base.

42 ENGINEERING↗
DOE OSTI2024

Atmospheric Variability Drives Anomalies in the Bering Sea Air–Sea Heat Exchange

Abstract High latitudes, including the Bering Sea, are experiencing unprecedented rates of change. Long-term Bering Sea warming trends have been identified, and marine heatwaves (MHWs), event-scale elevated sea surface temperature (SST) extremes, have also increased in frequency and longevity in recent years. Recent work has shown that variability in air–sea coupling plays a dominant role in driving Bering Sea upper-ocean thermal variability and that surface forcing has driven an increase in the occurrence of positive ocean temperature anomalies since 2010. In this work, we characterize the drivers of the anomalous surface air–sea heat fluxes in the Bering Sea over the period 2010–22 using ERA5 fields. We show that the surface turbulent heat flux dominates the net surface heat flux variability from September to April and is primarily a result of near-surface air temperature and specific humidity anomalies. The airmass anomalies that account for the majority of the turbulent heat flux variability are a function of wind direction, with southerly (northerly) wind advecting anomalously warm (cool), moist (dry) air over the Bering Sea, resulting in positive (negative) surface turbulent flux anomalies. During the remaining months of the year, anomalies in the surface radiative fluxes account for the majority of the net surface heat flux variability and are a result of anomalous cloud coverage, anomalous lower-tropospheric virtual temperature, and sea ice coverage variability. Our results indicate that atmospheric variability drives much of the Bering Sea upper-ocean temperature variability through the mediation of the surface heat fluxes during the analysis period. Significance Statement A long-term ocean warming trend and a recent increase in marine heatwaves in the Bering Sea have been identified. Previous work showed that anomalies in the exchange of heat between the ocean and the atmosphere were the primary driver of Bering Sea temperature variability, but the processes responsible for the heat exchange anomalies were unknown. In this work, we show that the atmosphere is the primary driver of anomalies in the Bering Sea air–sea heat exchange and therefore plays an important role in altering the thermal state of the Bering Sea. Our results highlight the importance of understanding more about how the ocean and the atmosphere interact at high latitudes and how this relationship will be affected by future climate change.

Hayden, Emily E. [a College of Earth, Ocean, and A↗
NASA NTRS1996

Surface Turbulent Fluxes Over Pack Ice Inferred from TOVS Observations

A one-dimensional, atmospheric boundary layer model is coupled to a thermodynamic ice model to estimate the surface turbulent fluxes over thick sea ice. The principal forcing parameters in this time-dependent model are the air temperature, humidity, and wind speed at a specified level (either at 2 m or at 850 mb) and the downwelling surface radiative fluxes. The free parameters. are the air temperature, humidity, and wind speed profiles below the specified level, the surface skin temperature, the ice temperature profile, and the surface turbulent fluxes. The goal is to determine how well we can estimate the turbulent surface heat and momentum fluxes using forcing parameters from atmospheric temperatures and radiative fluxes retrieved from the TIROS-N Operational Vertical Sounder (TOVS) data. Meteorological observations from the Lead Experiment (LeadEx, April 1992) ice camp are used to validate turbulent fluxes computed with the surface observations and the results are used to compare with estimates based on radio-sonde observations or with estimates based on TOVS data. We find that the TOVS-based estimates of the stress are significantly more accurate than those found with a constant geostrophic drag coefficient, with a root-mean-square error about half as large. This improvement is due to stratification effects included in the boundary layer model. The errors in the sensible heat flux estimates, however, are large compared to the small mean values observed during the field experiment.

Lindsay, R. W.↗
NASA NTRS1994

Tropical cloud feedbacks and natural variability of climate

Simulations of natural variability by two general circulation models (GCMs) are examined. One GCM is a sector model, allowing relatively rapid integration without simplification of the model physics, which would potentially exclude mechanisms of variability. Two mechanisms are found in which tropical surface temperature and sea surface temperature (SST) vary on interannual and longer timescales. Both are related to changes in cloud cover that modulate SST through the surface radiative flux. Over the equatorial ocean, SST and surface temperature vary on an interannual timescale, which is determined by the magnitude of the associated cloud cover anomalies. Over the subtropical ocean, variations in low cloud cover drive SST variations. In the sector model, the variability has no preferred timescale, but instead is characterized by a 'red' spectrum with increasing power at longer periods. In the terrestrial GCM, SST variability associated with low cloud anomalies has a decadal timescale and is the dominant form of global temperature variability. Both GCMs are coupled to a mixed layer ocean model, where dynamical heat transports are prescribed, thus filtering out El Nino-Southern Oscillation (ENSO) and thermohaline circulation variability. The occurrence of variability in the absence of dynamical ocean feedbacks suggests that climatic variability on long timescales can arise from atmospheric processes alone.

Miller, R. L.↗
NASA NTRS1995

Clouds and the Earth's Radiant Energy System (CERES) Algorithm Theoretical Basis Document: Cloud Analyses and Determination of Improved Top of Atmosphere Fluxes (Subsystem 4) - Volume 3

The theoretical bases for the Release 1 algorithms that will be used to process satellite data for investigation of the Clouds and Earth's Radiant Energy System (CERES) are described. The architecture for software implementation of the methodologies is outlined. Volume 3 details the advanced CERES methods for performing scene identification and inverting each CERES scanner radiance to a top-of-the-atmosphere (TOA) flux. CERES determines cloud fraction, height, phase, effective particle size, layering, and thickness from high-resolution, multispectral imager data. CERES derives cloud properties for each pixel of the Tropical Rainfall Measuring Mission (TRMM) visible and infrared scanner and the Earth Observing System (EOS) moderate-resolution imaging spectroradiometer. Cloud properties for each imager pixel are convolved with the CERES footprint point spread function to produce average cloud properties for each CERES scanner radiance. The mean cloud properties are used to determine an angular distribution model (ADM) to convert each CERES radiance to a TOA flux. The TOA fluxes are used in simple parameterization to derive surface radiative fluxes. This state-of-the-art cloud-radiation product will be used to substantially improve our understanding of the complex relationship between clouds and the radiation budget of the Earth-atmosphere system.

Source record↗
DOE OSTI2025

Representing Fine‐Scale Topographic Effects on Surface Radiation Balance in Hyper‐Resolution Land Surface Models

Land surface models are increasingly used to simulate land surface processes at hyper-spatial resolutions (e.g., ∼1 km). As model resolution increases, grid-scale topographic effects on surface radiation fluxes and their interactions between adjacent grids become more pronounced. However, current land surface models routinely neglect the fine-scale topographic effects on surface radiation balance. This study developed physically-based and computationally-efficient parameterizations (fineTOP) that explicitly resolve fine-scale topographic effects on downward shortwave and longwave radiation as well as land surface radiative properties. The newly developed parameterizations were implemented and tested in the Energy Exascale Earth System Model (E3SM) Land Model (ELM). Multi-decadal km-resolution ELM simulations over the California Sierra Nevada show that fine-scale topography significantly impacts the surface energy balance and snow processes across seasons. Slope determines the magnitude of topographic effects, while aspect controls their sign. For slopes larger than 30°, topography-induced change in annual surface temperature can be as large as 3.3 K. Regionally, the mean value and standard deviation of topography-induced changes in annual surface temperature are −0.22 ± 0.38 K and +0.25 ± 0.37 K over north-facing and south-facing slopes, respectively. Topography-induced changes in surface radiative properties account for 3.5% ± 13.8% of total topographic effects on annual net radiation. With fineTOP, ELM captures the aspect-dependence of snow cover fraction, snow water equivalent, and land surface temperature found in MODIS satellite observations and a snow reanalysis data set, while the default ELM fails to capture this phenomenon. The enhanced capability to represent fine-scale topographic effects on surface radiation balance can be used to advance understanding of the role of fine-scale topography in land surface processes and land-atmosphere interactions over mountainous regions.

Hao, Dalei [Pacific Northwest National Laboratory ↗
NASA NTRSDate not supplied

CERES FLASHFlux: Low Latency Data Product for Education and Applied Science Uses

The Fast Longwave and Shortwave Radiative Flux (FLASHFlux) data product was developed to provide a rapid release version of the CERES results, which are made available to the GLOBE (Global Learning and Observations to Benefit the Environment) program and the applied science research communities involving in the renewable energy and agricultural sectors within a week of the satellite observations by exchanging some accuracy for speed. FLASHFlux provides two data products: 1) an hourly Level 2 Single Scanner Footprint (SSF) data separately for Terra, Aqua, and NOAA-20 observations, and 2) a daily Level 3 Time Interpolated and Spatially Averaged (TISA) 1-degree equal angle gridded data the combines Terra and Aqua observations. However, since both Terra and Aqua satellites are nearing end of life, the FLASHFlux data product will begin to transition to utilizing NOAA-20 observation in the TISA data product. The Visible Infrared Imaging Radiometer Suite (VIIRS) on board the NOAA-20 and the Moderate Resolution Imaging Spectroradiometer (MODIS) on board the Aqua satellites have different optics and spectral channels. We quantify the differences in the Level 2 SSF data products between the two satellites over a few sample months for cloud and radiative flux quantities for both the shortwave (solar wavelengths) and longwave (thermal infrared wavelengths) at TOA and surface. In addition, we also assess the impact of using NOAA-20 in place of Aqua in the Level 3 FLASHFlux TISA daily product on the TOA and surface radiative fluxes. Additionally, we highlight use case of FLASHFlux data product in combination with CERES EBAF to assess the Earth’s Radiation Budget, the accuracy of FLASHFlux data product compares to Surface sites measurement, and users of the FLASHFlux data through the POWER (Prediction of Worldwide Energy Resources) program.

PC Sawaengphokhai↗
NASA NTRS1991

The derivation of cloud parameters from satellite-measured radiances for use in surface radiation calculations

A simple scheme is developed for calculating the cloud amount, optical thickness, and height from satellite-measured radiances and is applied to the International Satellite Cloud Climatology Project B3 radiance data to compute the surface radiative fluxes over the tropical and subtropical western Pacific regions for July 1983, using a radiative transfer model. Results are presented on the sensitivity of surface radiation to the cloud scheme. In addition, the validity of an empirical relationship between the solar fluxes at the surface and at the top of the atmosphere is examined.

Chou, Ming-Dah↗
DOE OSTI2020

Bounding Global Aerosol Radiative Forcing of Climate Change

Abstract Aerosols interact with radiation and clouds. Substantial progress made over the past 40 years in observing, understanding, and modeling these processes helped quantify the imbalance in the Earth's radiation budget caused by anthropogenic aerosols, called aerosol radiative forcing, but uncertainties remain large. This review provides a new range of aerosol radiative forcing over the industrial era based on multiple, traceable, and arguable lines of evidence, including modeling approaches, theoretical considerations, and observations. Improved understanding of aerosol absorption and the causes of trends in surface radiative fluxes constrain the forcing from aerosol‐radiation interactions. A robust theoretical foundation and convincing evidence constrain the forcing caused by aerosol‐driven increases in liquid cloud droplet number concentration. However, the influence of anthropogenic aerosols on cloud liquid water content and cloud fraction is less clear, and the influence on mixed‐phase and ice clouds remains poorly constrained. Observed changes in surface temperature and radiative fluxes provide additional constraints. These multiple lines of evidence lead to a 68% confidence interval for the total aerosol effective radiative forcing of ‐1.6 to ‐0.6 W m −2 , or ‐2.0 to ‐0.4 W m −2 with a 90% likelihood. Those intervals are of similar width to the last Intergovernmental Panel on Climate Change assessment but shifted toward more negative values. The uncertainty will narrow in the future by continuing to critically combine multiple lines of evidence, especially those addressing industrial‐era changes in aerosol sources and aerosol effects on liquid cloud amount and on ice clouds.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Search for a Cloud Phase Feedback in the Arctic Climate System

This project was motivated by a hypothesis involving the transition in lower troposphere temperatures across the freezing point of water. Specifically, at temperatures just below to about ten degrees below freezing, Arctic clouds should be in a mixed-phase, with strong influences from secondary ice production (e.g., the Hallett-Mossop process). At temperatures just above freezing, clouds should become entirely deglaciated. We hypothesized that, with multiple years of ARM data, a statistically significant change could be detected in cloud radiative properties and surface radiative fluxes that could be directly attributed to this phase change. Furthermore, in a gradually warming climate, these phase change-related responses in surface radiation would represent a cloud phase feedback as part of Arctic amplification. We designed this research project to coincide with a new ARM Arctic cloud radar product developed by Ed Luke and collaborators at BNL (Luke et al., 2021: PNAS, doi:10.1073/pnas.2021387118) that explicitly contains SIP cloud properties retrieved from radar data. This research project has successfully concluded after analysis of a much larger North Slope of Alaska (NSA) data sample than originally anticipated, and the results are quite different than originally hypothesized.

58 GEOSCIENCES↗
NASA NTRSDate not supplied

CERES Clouds and Radiative Swath (CRS) data in HDF (CER_CRS_TRMM-PFM-VIRS_Edition2C)

The Clouds and Radiative Swath (CRS) product contains one hour of instantaneous Clouds and the Earth's Radiant Energy System (CERES) data for a single scanner instrument. The CRS contains all of the CERES SSF product data. For each CERES footprint on the SSF the CRS also contains vertical flux profiles evaluated at four levels in the atmosphere: the surface, 500-, 70-, and 1-hPa. The CRS fluxes and cloud parameters are adjusted for consistency with a radiative transfer model and adjusted fluxes are evaluated at the four atmospheric levels for both clear-sky and total-sky. [Location=GLOBAL] [Temporal_Coverage: Start_Date=1998-01-01; Stop_Date=2000-03-31] [Spatial_Coverage: Southernmost_Latitude=-90; Northernmost_Latitude=90; Westernmost_Longitude=-180; Easternmost_Longitude=180] [Data_Resolution: Temporal_Resolution=1 hour; Temporal_Resolution_Range=Hourly - < Daily].

ICE PARTICLE DIAMETER↗
NASA NTRS2017

North Polar Radiative Flux Variability from 2002 Through 2014

NASA's Clouds and the Earth's Radiant Energy System (CERES) project produces the SYN1Deg data product. SYN1deg provides global, 1deg gridded, hourly estimates of Top of Atmosphere (TOA) (CERES observations and calculations) and atmospheric and surface radiative flux (calculations). Examples of 12 year North Polar averages of some variables are shown to the right. Given recent interest in polar science we focus here on TOA and Surface validation of calculated irradiant fluxes. TOA upward longwave irradiance calculations match the CERES observations well both spatially and temporally with correlations remaining strong through PC 6. Compare SYN1Deg Calculations & Meteorological Teleconnections. TOA reflected shortwave irradiance calculations match the CERES observations well both spatially and temporally with correlations remaining string through PC 7. Comparing SYN1Deg calculations to teleconnection patterns requires expanding the area to 30N for EOF analyses. Correlating the Principal Components of various variables to teleconnection time series indicates which variable is most highly correlated with which teleconnection signal. The tables indicate the Pacific North American Oscillation is most correlated to the OLR EOF 1, and the North American Oscillation is correlated most closely to surface LW flux down EOF 1.

Rutan, David↗
NASA NTRS2000

Validation of CERES/TERRA Data

There are 2 CERES scanning radiometer instruments aboard the TERRA spacecraft, one for mapping the solar radiation reflected from the Earth and the outgoing longwave radiation and the other for measuring the anisotropy of the radiation. Each CERES instrument has on-board calibration devices, which have demonstrated that from ground to orbit the broadband total and shortwave sensor responses maintained their ties to the International Temperature Scale of 1990 at precisions approaching radiances have been validated in orbit to +/- 0.3 % (0.3 W/sq m sr). Top of atmosphere fluxes are produced by use of the CERES data alone. By including data from other instruments, surface radiation fluxes and radiant fluxes within the atmosphere and at its top, shortwave and longwave, for both up and down components, are derived. Validation of these data products requires ground and aircraft measurements of fluxes and of cloud properties.

Barkstrom, Bruce R.↗
NASA NTRS1990

Cloud radiative forcing variability during FIFE

The present study evaluates a set of radiative flux surface measurements, concomitant with other meteorological observations, so as to derive the cloud radiative forcing at the surface. The forcing is analyzed in terms of variability and relation to other meteorological parameters. Both SW and LW cloud forcings show a very large temporal variability due to the changing cloudiness and to measurements and computational uncertainties. No dominant correlation between either components of the cloud radiative forcing and cloudiness were found using sky camera data. This is explained by the fact that forcings are a function not only of cloudiness but also of cloud liquid water content and cloud base height. Surface cloud radiative forcing showed a rather large diurnal cycle with a minimum at local noon for the LW component and two pronounced minima at sunrise and sunset for the SW component.

Breon, Francois-Marie↗
NASA NTRS1990

Using spatial coherence to retrieve cloud properties - ERBE experience and CERES applications

Cloud properties for individual ERBE scanner fields of view are obtained from simultaneous, collocated imagery data. The cloud properties are used to assess the performance of the ERBE maximum likelihood estimate of cloud conditions which ultimately influences estimates of the radiative fluxes at the top of the atmosphere. During EOS the analysis of MODIS observations within the fields of view of the CERES instruments promises to yield, in addition, estimates of surface radiative fluxes as well as the vertical distribution of radiative heating within the atmosphere.

Coakley, James A., Jr.↗
NASA NTRS2022

The impacts of immersion ice nucleation parameterizations on Arctic mixed-phase stratiform cloud properties and the Arctic radiation budget in GEOS-5

The influence of four different immersion freezing parameterizations on Arctic clouds and the top-of-the atmosphere (TOA) and surface radiation fluxes is investigated in the fifth version of the National Aeronautics and Space Administration (NASA) Goddard Earth Observing System (GEOS-5) with sea surface temperature, sea ice fraction and aerosol emissions held fixed. The different parameterizations were derived from a variety of sources, including classical nucleation theory, field and laboratory measurements. Despite the large spread in the ice-nucleating particle (INP) concentrations in the parameterizations, the cloud properties and radiative fluxes had a tendency to form two groups, with the lower INP concentration category producing larger water path and low-level cloud fraction during winter and early spring, whereas the opposite occurred during the summer season. The stability of the lower troposphere was found to strongly correlate with low-cloud fraction, and along with the effect of ice nucleation, ice sedimentation and melting rates, appears to explain the spring-to-summer reversal pattern in the relative magnitude of the cloud properties between the two categories of simulations. The strong modulation effect of the liquid phase on immersion freezing led to the successful simulation of the characteristic Arctic cloud structure, with a layer rich in supercooled water near cloud top and ice and snow at lower levels. Comparison with satellite retrievals and in situ data suggest that simulations with low INP concentrations more realistically represent Arctic clouds and radiation.

Arctic↗