Search NASA⌕ Search

SEARCH · Search NASA

Results for “test cases”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS2019

Rest-Frame UV and Optical Emission Line Diagnostics of Ionized Gas Properties: a Test Case in a Star-Forming Knot of a Lensed Galaxy at Z ∼ 1.7

We examine the diagnostic power of rest-frame ultraviolet (UV) nebular emission lines, and compare them to more commonly used rest-frame optical emission lines, using the test case of a single star-forming knot of the bright lensed galaxy RCSGA 032727–132609 at redshift z ∼ 1.7. This galaxy has complete coverage of all the major rest-frame UV and optical emission lines from Magellan/MagE and Keck/NIRSPEC. Using the full suite of diagnostic lines, we infer the physical properties: nebular electron temperature (T(sub e)), electron density (n(sub e)), oxygen abundance (log (O/H), ionization parameter [log (q), and interstellar medium (ISM) pressure (log (P/k)]. We examine the effectiveness of the different UV, optical, and joint UV–optical spectra in constraining the physical conditions. Using UV lines alone we can reliably estimate log (q), but the same is difficult for log (O/H). UV lines yield a higher (∼1.5 dex) log (P/k) than the optical lines, as the former probes a further inner nebular region than the latter. For this comparison, we extend the existing Bayesian inference code IZI, adding to it the capability to infer ISM pressure simultaneously with metallicity and ionization parameter. This work anticipates future rest-frame UV spectral data sets from the James Webb Space Telescope (JWST) at high redshift and from the Extremely Large Telescope (ELT) at moderate redshift.

Acharyya, Ayan↗
NASA NTRS1980

A system for aerodynamic design and analysis of supersonic aircraft. Part 4: Test cases

An integrated system of computer programs was developed for the design and analysis of supersonic configurations. The system uses linearized theory methods for the calculation of surface pressures and supersonic area rule concepts in combination with linearized theory for calculation of aerodynamic force coefficients. Interactive graphics are optional at the user's request. Representative test cases and associated program output are presented.

Middleton, W. D.↗
NASA NTRS2010

Broadband Fan Noise Prediction System for Turbofan Engines: Validation and Test Cases - Volume 3

Pratt & Whitney has developed a Broadband Fan Noise Prediction System (BFaNS) for turbofan engines. This system computes the noise generated by turbulence impinging on the leading edges of the fan and fan exit guide vane, and noise generated by boundary-layer turbulence passing over the fan trailing edge. BFaNS has been validated on three fan rigs that were tested during the NASA Advanced Subsonic Technology Program (AST). The predicted noise spectra agreed well with measured data. The predicted effects of fan speed, vane count, and vane sweep also agreed well with measurements. The noise prediction system consists of two computer programs: Setup_BFaNS and BFaNS. Setup_BFaNS converts user-specified geometry and flow-field information into a BFaNS input file. From this input file, BFaNS computes the inlet and aft broadband sound power spectra generated by the fan and FEGV. The output file from BFaNS contains the inlet, aft and total sound power spectra from each noise source. This report is the third volume of a three-volume set documenting the Broadband Fan Noise Prediction System: Volume 1: Setup_BFaNS User s Manual and Developer s Guide; Volume 2: BFaNS User s Manual and Developer s Guide; and Volume 3: Validation and Test Cases. The present volume begins with an overview of the Broadband Fan Noise Prediction System, followed by validation studies that were done on three fan rigs. It concludes with recommended improvements and additional studies for BFaNS.

Morin, Bruce L.↗
NASA NTRS1977

Exact Green's function method of solar force-free magnetic-field computations with constant alpha. I - Theory and basic test cases

Exact closed-form solutions to the solar force-free magnetic-field boundary-value problem are obtained for constant alpha in Cartesian geometry by a Green's function approach. The uniqueness of the physical problem is discussed. Application of the exact results to practical solar magnetic-field calculations is free of series truncation errors and is at least as economical as the approximate methods currently in use. Results of some test cases are presented.

Chiu, Y. T.↗
NASA NTRSDate not supplied

A Separation Control CFD Validation Test Case: Baseline and Steady Suction - Part 1

Low speed flow separation over a wall-mounted hump, and its control using steady suction, were studied experimentally in order to generate a data set for a workshop aimed at validating CFD turbulence models. The baseline and controlled data sets comprised static and dynamic surface pressure measurements, flow field measurements using Particle Image Velocimetry (PIV) and wall shear stress obtained via oil-film interferometry. In addition to the specific test cases studied, surface pressures for a wide variety of conditions were reported for different Reynolds numbers and suction rates. Stereoscopic PIV and oil-film flow visualization indicated that the baseline separated flow field was mainly two- dimensional. With the application of control, some three-dimensionality was evident in the spanwise variation of pressure recovery, reattachment location and spanwise pressure fluctuations. Part 2 of this paper, under preparation for the AIAA Meeting in Reno 2005, considers separation control by means of zero-efflux oscillatory blowing.

David Greenblatt↗
NASA NTRS2004

A Separation Control CFD Validation Test Case: Baseline and Steady Suction - Part 1

Low speed flow separation over a wall-mounted hump, and its control using steady suction, were studied experimentally in order to generate a data set for a workshop aimed at validating CFD turbulence models. The baseline and controlled data sets comprised static and dynamic surface pressure measurements, flow field measurements using Particle Image Velocimetry (PIV) and wall shear stress obtained via oil-film interferometry. In addition to the specific test cases studied, surface pressures for a wide variety of conditions were reported for different Reynolds numbers and suction rates. Stereoscopic PIV and oil-film flow visualization indicated that the baseline separated flow field was mainly two-dimensional. With the application of control, some three-dimensionality was evident in the spanwise variation of pressure recovery, reattachment location and spanwise pressure fluctuations. Part 2 of this paper, under preparation for the AIAA Meeting in Reno 2005, considers separation control by means of zero-efflux oscillatory blowing.

Greenblatt, David↗
NASA NTRS2010

Comparison of ORSAT and SCARAB Reentry Analysis Tools for a Generic Satellite Test Case

Reentry analysis is essential to understanding the consequences of the full life cycle of a spacecraft. Since reentry is a key factor in spacecraft development, NASA and ESA have separately developed tools to assess the survivability of objects during reentry. Criteria such as debris casualty area and impact energy are particularly important to understanding the risks posed to people on Earth. Therefore, NASA and ESA have undertaken a series of comparison studies of their respective reentry codes for verification and improvements in accuracy. The NASA Object Reentry Survival Analysis Tool (ORSAT) and the ESA Spacecraft Atmospheric Reentry and Aerothermal Breakup (SCARAB) reentry analysis tools serve as standard codes for reentry survivability assessment of satellites. These programs predict whether an object will demise during reentry and calculate the debris casualty area of objects determined to survive, establishing the reentry risk posed to the Earth's population by surviving debris. A series of test cases have been studied for comparison and the most recent uses "Testsat," a conceptual satellite composed of generic parts, defined to use numerous simple shapes and various materials for a better comparison of the predictions of these two codes. This study is an improvement on the others in this series because of increased consistency in modeling techniques and variables. The overall comparison demonstrated that the two codes arrive at similar results. Either most objects modeled resulted in close agreement between the two codes, or if the difference was significant, the variance could be explained as a case of semantics in the model definitions. This paper presents the main results of ORSAT and SCARAB for the Testsat case and discusses the sources of any discovered differences. Discussion of the results of previous comparisons is made for a summary of differences between the codes and lessons learned from this series of tests.

Kelley, Robert L.↗
NASA NTRS1988

Horizontal plasma flow velocities in the ionosphere of Mars - A test case for the solar wind interaction

On the apparently nonmagnetic planets Mars and Venus, ionospheric plasma can be driven from the day to the nightside by two different mechanisms: (1) the pressure gradient force across the terminator, and (2) a solar wind-induced force via a viscous boundary layer interaction. Calculations of the horizontal flow velocities in the ionosphere of Mars using the two mechanisms produce results differing by an order of magnitude. It is pointed out that the detailed observations of the horizontal flow velocity in the ionosphere of Mars may provide a test case for the resolution of some problems relating to the interaction of the solar wind with the planets Mars and Venus.

Singhal, R. P.↗
NASA NTRS1991

Standard test case for a low-speed, turbulent junction vortex flow

The mean flow structure upstream, around within, and in the near wake of a turbulent junction or horseshoe vortex is reported for an incompressible subsonic flow. Measurements of the primitive variables of velocity and pressure are reported on all surfaces bounding the region of the vortex flow and on three transverse and one streamwise plane within the flowfield itself for comparisons between the measured and any calculated flow variables. Detailed surface flow visualizations and some direct force measurements of surface shear stress are also available. The data is a highly detailed, coherent, self-consistent set offered to the computational fluid mechanics community as a standard test case for the evaluation of the capability of numerical solvers intended for predicting the flowfield in such a complex, separated, three-dimensional turbulent flow. This data base is available for copying to user supplied tapes or for transmission via BITNET, as well as in two National Technical Information Service (NTIS) reports.

Pierce, F. J.↗
NASA NTRSDate not supplied

FUN3D Analyses of the 5th AIAA Propulsion Aerodynamics Workshop Inlet Test Case

This work presents the results of FUN3D analyses that were performed for the 5th AIAA Propulsion Aerodynamics Workshop. The workshop was separated into two sections that focused on inlet and nozzle flows. This paper focuses on the inlet section of the workshop, which considered an axisymmetric inlet in close-proximity to the ground and subjected to a crosswind. Four levels of grid refinement were provided by the workshop committee. Participants were asked to perform simulations for three crosswind velocities on a minimum of three levels of grid refinement, for a total of nine required cases. This work employed an updated set of grids provided by the committee after completion of the workshop based on feedback from participants. The updated grids featured a larger computational domain and increased refinement near the ground vortex region. This work employed the three coarsest grid levels from the updated grid set. Note that an additional extension downstream of the inlet was added to the provided grids for this work to mitigate observed convergence issues. Additionally, a limited turbulence model study was performed for the highest value of crosswind velocity and the finest grid. The results show that grid convergence was only achieved for the case with the lowest value of crosswind velocity. However, the results were generally observed to improve, relative to the experimental data, with increasing grid refinement. The FUN3D predictions were observed to agree qualitatively with the provided experimental data. However, FUN3D exhibited a tendency to underpredict the minimum value of the radially averaged total pressure at the Aerodynamic Interface Plane, which is consistent with the general findings from the workshop. Overall, FUN3D was found to perform well relative to its peers for the PAW5 workshop inlet test case.

PAI↗
NASA NTRSDate not supplied

FUN3D Analyses of the 5th AIAA Propulsion Aerodynamics Workshop Inlet Test Case

This work presents the results of FUN3D analyses that were performed for the 5th AIAA Propulsion Aerodynamics Workshop. The workshop was separated into two sections that focused on inlet and nozzle flows. This paper focuses on the inlet section of the workshop, which considered an axisymmetric inlet in close-proximity to the ground and subjected to a crosswind. Four levels of grid refinement were provided by the workshop committee. Participants were asked to perform simulations for three crosswind velocities on a minimum of three levels of grid refinement, for a total of nine required cases. This work employed an updated set of grids provided by the committee after completion of the workshop based on feedback from participants. The updated grids featured a larger computational domain and increased refinement near the ground vortex region. This work employed the three coarsest grid levels from the updated grid set. Note that an additional extension downstream of the inlet was added to the provided grids for this work to mitigate observed convergence issues. Additionally, a limited turbulence model study was performed for the highest value of crosswind velocity and the finest grid. The results show that grid convergence was only achieved for the case with the lowest value of crosswind velocity. However, the results were generally observed to improve, relative to the experimental data, with increasing grid refinement. The FUN3D predictions were observed to agree qualitatively with the provided experimental data. However, FUN3D exhibited a tendency to underpredict the minimum value of the radially averaged total pressure at the Aerodynamic Interface Plane, which is consistent with the general findings from the workshop. Overall, FUN3D was found to perform well relative to its peers for the PAW5 workshop inlet test case.

PAI↗
NASA NTRS2011

Automated Test Case Generation for an Autopilot Requirement Prototype

Designing safety-critical automation with robust human interaction is a difficult task that is susceptible to a number of known Human-Automation Interaction (HAI) vulnerabilities. It is therefore essential to develop automated tools that provide support both in the design and rapid evaluation of such automation. The Automation Design and Evaluation Prototyping Toolset (ADEPT) enables the rapid development of an executable specification for automation behavior and user interaction. ADEPT supports a number of analysis capabilities, thus enabling the detection of HAI vulnerabilities early in the design process, when modifications are less costly. In this paper, we advocate the introduction of a new capability to model-based prototyping tools such as ADEPT. The new capability is based on symbolic execution that allows us to automatically generate quality test suites based on the system design. Symbolic execution is used to generate both user input and test oracles user input drives the testing of the system implementation, and test oracles ensure that the system behaves as designed. We present early results in the context of a component in the Autopilot system modeled in ADEPT, and discuss the challenges of test case generation in the HAI domain.

Giannakopoulou, Dimitra↗
DOE OSTI2020

Optimal electric-distribution-grid planning considering the demand-side flexibility of thermal building systems for a test case in Singapore

The planning of district-scale electric grids, i.e., distribution grids, has traditionally relied on finding the most cost-effective design such that they are able to supply the peak loads in a district. With the advent of electric demand side flexibility (DSF), there is the opportunity to reshape peak loads such that the investment cost of the electric grid decreases in exchange for a minor increase in the operation cost. This paper formulates an optimal planning approach for the electric grid at the district scale, which incorporates the DSF from thermal building systems, e.g., heating ventilation and air-conditioning (HVAC) systems. The problem is formulated as a mixed-integer linear program (MILP) and aims at minimizing the investment cost for the grid along with the operation cost of the flexible loads. This is subjected to the fixed electricity demand and thermal comfort constraints of building occupants. To this end, linear models for the thermal comfort in the buildings and the power flow in electric grid are considered. The approach is tested on a district planning test case based in Singapore, where the results show up to 30.9 % reductions in investment cost and up to 3.7 % reduction in total annualized cost. Urban planning authorities, developers and utility companies can all benefit from the presented approach to make optimized investment decisions. For building operators, the results point to the need of adopting their control systems for DSF.

Troitzsch, Sebastian↗
DOE OSTI2024

Summary of FY 2024 A709 Code Case testing at ANL, INL and ORNL

A collaborative research and development effort in support of the Alloy 709 Code Case qualification in the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code, Section III, Division 5, High Temperature Reactors is being carried out at Oak Ridge National Laboratory (ORNL), Idaho National Laboratory (INL), and Argonne National Laboratory (ANL). Key testing data for the Alloy 709 100,000-hr near-term Code Case submittal to ASME is expected to be completed by the end of 2024, with design parameters anticipated to be finalized in FY 2025. This report summarizes the testing results for three commercial heats of Alloy 709 conducted across three laboratories, reviews the current testing status, and outlines the remaining data needed to support the first Alloy 709 Code Case submittal to ASME. The Alloy 709 Code Case plan remains on schedule.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
NASA NTRS2001

Test Cases for Modeling and Validation of Structures with Piezoelectric Actuators

A set of benchmark test articles were developed to validate techniques for modeling structures containing piezoelectric actuators using commercially available finite element analysis packages. The paper presents the development, modeling, and testing of two structures: an aluminum plate with surface mounted patch actuators and a composite box beam with surface mounted actuators. Three approaches for modeling structures containing piezoelectric actuators using the commercially available packages: MSC/NASTRAN and ANSYS are presented. The approaches, applications, and limitations are discussed. Data for both test articles are compared in terms of frequency response functions from deflection and strain data to input voltage to the actuator. Frequency response function results using the three different analysis approaches provided comparable test/analysis results. It is shown that global versus local behavior of the analytical model and test article must be considered when comparing different approaches. Also, improper bonding of actuators greatly reduces the electrical to mechanical effectiveness of the actuators producing anti-resonance errors.

Reaves, Mercedes C.↗
NASA NTRS1992

Perturbation of a normal shock - A test case for unsteady Euler codes

Shock tracking capabilities of modern nonoscillatory schemes for solving the Euler equations are studied by comparing their solutions to solutions obtained using the method of characteristics on two test problems. Both test problems involve accelerating and decelerating shock motions. The schemes tested include first order upwind, second order SONIC-A, third order ENO, and third order TONIC-A. Results show that the second and higher order schemes give nearly identical shock trajectories that are closer to the characteristic solution than the first order upwind scheme. All schemes approach the characteristic solution upon mesh refinement.

Suresh, Ambady↗