Search NASA⌕ Search

SEARCH · Search NASA

Results for “thiophene”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Influence of Surface and Structural Variations in Donor–Acceptor–Donor Sensitizers on Photoelectrocatalytic Water Splitting

Conjugated organic chromophores composed of linked donor (D) and acceptor (A) moieties have attracted considerable attention for photoelectrochemical applications. In this work, we compare the optoelectronic properties and photoelectrochemical performance of two D–A–D structural isomers with thiophene-X-carboxylic acid (X denotes 3 and 2 positions) derivatives and 2,1,3-benzothiadiazole as the D and A moieties, respectively. 5,5′-(Benzo[c][1,2,5]thiadiazole-4,7-diyl)bis(thiophene-3-carboxylic acid), BTD1, and 5,5′-(benzo[c][1,2,5]thiadiazole-4,7-diyl)bis(thiophene-2-carboxylic acid), BTD2, were employed in the study to understand how structural isomers affect surface attachments within chromophore–catalyst assemblies and their influence on charge-transfer dynamics. Crystal structures revealed that varying the position of the −COOH anchoring group causes the molecules to either contort out of a plane (BTD1) or adopt a near-perfect planar conformation (BTD2). BTD1 and BTD2 were co-loaded with either a water oxidation catalyst, [Ru(2,6-bis(1-methylbenzimidazol-2-yl)pyridine)-(4,4′-((HO) 2 OPCH 2 )2-2,2′-bipyridine)(OH 2 )] 2 , RuCt 2+ , or proton reduction catalyst [Ni(P 2 Ph N 2 C 6 H 4 CH 2 PO 3 H 2 ) 2 ] 2+ , NiCt 2+ , on oxide electrodes to facilitate photodriven water splitting reactions. Emission quenching measurements indicate that both BTD1 and BTD2 inject electrons into n-type SnO 2 |TiO 2 electrodes and holes into p-type NiO semiconductors from their respective excited states at high efficiencies >60%. Photocurrent densities of chromophore–catalyst assemblies obtained using linear sweep voltammetry (LSV) show that BTD2-sensitized photoanodes generate significantly more photocurrent than BTD1-sensitized electrodes; however, both exhibit similar performances at the photocathode. Photoelectrocatyltic measurements demonstrate that both BTD1 and BTD2 performed similarly, generating Faradaic efficiencies of 39 and 38% at the anode or 61 and 79% at the cathode. Transient absorption measurements suggest that the differences between the LSV and photoelectrocatalytic measurements result from the differences in quantum yields of the photogenerated redox equivalents, which is also a reflection of the varying metal oxide surface conformation. Our findings suggest that BTD2 should be investigated further in photocathodic studies since it has the structural advantage of being incorporated into diverse types of chromophore–catalyst assemblies.

Chromophores↗
DOE OSTI2025

Substituent effect on napthodithiophene-fused porphyrins: Understanding the unusual trend of fluorescence quantum yield quenching

A series of π-extended porphyrins containing thiophene units was prepared to investigate an unusual trend observed in the fluorescence quantum yield of naphtho[2,1-b:3,4-b']dithiophene-fused porphyrins. Monobenzoporphyrins carrying 2-thiophenyl (vinyl thiophene porphyrin) groups (2VTP, 2VTBr and Br2VTP) (numbering 2 and 3 refers to the position of sulfur on the thiophene ring) were synthesized through a Heck-based cascade reaction followed by a newly developed bromination method. These were converted to naphtho[2,1-b:3,4-b']dithiophene-fused porphyrin derivatives (FBr2VTP and F2VTBr) via ring closure with an intramolecular Scholl reaction. Increasingly larger Stokes shifts with a higher number of bromo groups were observed in the unfused π-extended molecular systems, reflecting the heavy atom effect. Fluorescence spectroscopy further confirmed the unusual trend seen in the previous work: structural rigidification in naphtho[2,1-b:3,4-b']dithiophene-fused porphyrins leads to longer fluorescence lifetimes but unexpectedly lowers the quantum yield. Adding one bromo group to the naphtho[2,1-b:3,4-b']dithiophene unit does not change this trend. Furthermore, the presence of two bromo groups prevents the quantum yield from dropping. DFT, TDDFT, and NICS analyses suggest a drastic change in aromaticity in the pyrrole ring where the naphtho[2,1-b:3,4-b']dithiophene is fused in FBr2VTP, which might contribute to the quantum yield reductions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Chiral Recognition: A Spin-Driven Process in Chiral Oligothiophene. A Chiral-Induced Spin Selectivity (CISS) Effect Manifestation

In this paper it is experimentally demonstrated that the electron-spin/molecular-handedness interaction plays a fundamental role in the chiral recognition process. This conclusion is inferred comparing current versus potential (I-V) curves recorded using chiral electrode surfaces, which are obtained via chemisorption of an enantiopure thiophene derivative: 3,3'-bibenzothiophene core functionalized with 2,2'-bithiophene wings (BT 2 T 4 ). The chiral recognition capability of these chiral-electrodes is probed via cyclic voltammetry measurements, where, Ag nanoparticles (AgNPs) capped with enantiopure (BT 2 T 4 ) (BT 2 T 4 )@AgNP) are used as the chiral redox probe. Then, the interface handedness is explored by recording spin-polarized (I-V) curves in spin-dependent electrochemistry (SDE) and magnetic-conductive atomic force microscopy (mc-AFM) experiments. The quality of the interfaces is thoroughly cross-checked using X-ray photoemission spectroscopy, Raman, electrodesorption measurements, which further substantiate the metal(electrode)-sulfur(thiophene) central role in the chemisorption process. Spin-polarization values of about 15% and 30% are obtained in the case of SDE and mc-AFM experiments, respectively.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Half‐Fused Diketopyrrolopyrrole‐Based Conjugated Donor–Acceptor Polymer for Ambipolar Field‐Effect Transistors

Abstract A novel building block, denoted as half‐fused diketopyrrolopyrrole (DPP) (9‐(3‐octadecylhenicosyl)‐8‐(thiophen‐2‐yl)‐7 H ‐pyrrolo[3,4‐ a ]thieno[3,2‐ g ]indolizine‐7,10(9 H )‐dione), in which one of the flanking thiophene units is fused to one of the DPP rings via a carbon‐carbon double bond at the N‐position is reported. The half‐fused DPP is successfully utilized as an electron acceptor to prepare the conjugated donor–acceptor polymer PTFDFT , which exhibits ambipolar semiconducting behavior in ambient air. Theoretical calculations and absorption spectral studies show that the backbone of PTFDFT is more planar compared to the reference polymer with conventional DPP units. As a result, PTFDFT shows a narrow bandgap and low lowest unoccupied molecular orbital level. The more planar backbone with fewer side chains favors the dense packing of the polymer chains of PTFDFT with a short π–π stacking distance (3.49 Å). Grazing‐incidence wide‐angle X‐ray scattering data further confirm the predominant edge‐on packing mode of the PTFDFT polymer chains on the substrate. As expected, the PTFDFT thin film shows excellent ambipolar semiconducting properties under ambient conditions, reaching 2.23 and 1.08 cm 2 V −1 s −1 for the n‐ and p‐channels, respectively. In addition, complementary‐like inverter with gain value as high as 141 is successfully constructed using the PTFDFT thin film.

Shi, Dandan↗
DOE OSTI2021

Metal–Ligand Based Mechanophores Enhance Both Mechanical Robustness and Electronic Performance of Polymer Semiconductors

The backbone of diketopyrrolopyrrole-thiophene-vinylene-thiophene-based polymer semiconductors (PSCs) is modified with pyridine (Py) or bipyridine ligands to complex Fe(II) metal centers, allowing the metal–ligand complexes to act as mechanophores and dynamically crosslink the polymer chains. Here, mono- and bi-dentate ligands are observed to exhibit different degrees of bond strengths, which subsequently affect the mechanical properties of these Wolf-type-II metallopolymers. The counter ion also plays a crucial role, as it is observed that Py-Fe mechanophores with non-coordinating BPh 4 – counter ions (Py-FeB) exhibit better thin film ductility with lower elastic modulus, as compared to the coordinating chloro ligands (Py-FeC). Interestingly, besides mechanical robustness, the electrical charge carrier mobility can also be enhanced concurrently when incorporating Py-FeB mechanophores in PSCs. This is a unique observation among stretchable PSCs, especially that most reports to date describe a decreased mobility when the stretchability is improved. Next, it is determined that improvements to both mobility and stretchability are correlated to the solid-state molecular ordering and dynamics of coordination bonds under strain, as elucidated via techniques of grazing-incidence X-ray diffraction and X-ray absorption spectroscopy techniques, respectively. This study provides a viable approach to enhance both the mechanical and the electronic performance of polymer-based soft devices.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Ion Exchange Gels Allow Organic Electrochemical Transistor Operation with Hydrophobic Polymers in Aqueous Solution

Conjugated-polymer-based organic electrochemical transistors (OECTs) are being studied for applications ranging from biochemical sensing to neural interfaces. While new polymers that interface digital electronics with the aqueous chemistry of life are being developed, the majority of high-performance organic transistor materials are poor at transporting biologically relevant ions. Here, the operating mode of an organic transistor is changed from that of an electrolyte-gated organic field-effect transistor (EGOFET) to that of an OECT by incorporating an ion exchange gel between the active layer and the aqueous electrolyte. This device works by taking up biologically relevant ions from solution and injecting more hydrophobic ions into the active layer. Using poly[2,5-bis(3-tetradecylthiophen-2-yl) thieno[3,2-b]thiophene] as the active layer and a blend of an ionic liquid, 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, and poly(vinylidene fluoride-co-hexafluoropropylene) as the ion exchange gel, four orders of magnitude improvement in device transconductance and a 100-fold increase in kinetics are demonstrated. The ability of the ion-exchange-gel OECT to record biological signals by measuring the action potentials of a Venus flytrap is demonstrated. These results show the possibility of using interface engineering to open up a wider palette of organic semiconductors as OECTs that can be gated by aqueous solutions.

Bischak, Connor G.↗
DOE OSTI2020

Critical Role of Polymer Aggregation and Miscibility in Nonfullerene‐Based Organic Photovoltaics

Abstract Understanding the correlation between polymer aggregation, miscibility, and device performance is important to establish a set of chemistry design rules for donor polymers with nonfullerene acceptors (NFAs). Employing a donor polymer with strong temperature‐dependent aggregation, namely PffBT4T‐2OD [poly[(5,6‐difluoro‐2,1,3‐benzothiadiazol‐4,7‐diyl)‐ alt ‐(3,3″′‐di(2‐octyldodecyl)‐2,2′;5′,2″;5″,2″′‐quaterthiophen‐5,5‐diyl)], also known as PCE‐11 as a base polymer, five copolymer derivatives having a different thiophene linker composition are blended with the common NFA O‐IDTBR to investigate their photovoltaic performance. While the donor polymers have similar optoelectronic properties, it is found that the device power conversion efficiency changes drastically from 1.8% to 8.7% as a function of thiophene content in the donor polymer. Results of structural characterization show that polymer aggregation and miscibility with O‐IDTBR are a strong function of the chemical composition, leading to different donor–acceptor blend morphology. Polymers having a strong tendency to aggregate are found to undergo fast aggregation prior to liquid–liquid phase separation and have a higher miscibility with NFA. These properties result in smaller mixed donor–acceptor domains, stronger PL quenching, and more efficient exciton dissociation in the resulting cells. This work indicates the importance of both polymer aggregation and donor–acceptor interaction on the formation of bulk heterojunctions in polymer:NFA blends.

Yi, Xueping↗
DOE OSTI2023

Heterocyclic Chromophore Amphiphiles and their Supramolecular Polymerization

Abstract Supramolecular polymerization of π‐conjugated amphiphiles in water is an attractive approach to create functional nanostructures. Here, we report on the synthesis, optoelectronic and electrochemical properties, aqueous supramolecular polymerization, and conductivity of polycyclic aromatic dicarboximide amphiphiles. The chemical structure of the model perylene monoimide amphiphile was modified with heterocycles, essentially substituting one fused benzene ring with thiophene, pyridine or pyrrole rings. All the heterocycle‐containing monomers investigated underwent supramolecular polymerization in water. Large changes to the monomeric molecular dipole moments led to nanostructures with low electrical conductivity due to diminished interactions. Although the substitution of benzene with thiophene did not notably change the monomer dipole moment, it led to crystalline nanoribbons with 20‐fold higher electrical conductivity, due to enhanced dispersion interactions as a result of the presence of sulfur atoms.

Đorđević, Luka↗
DOE OSTI2023

Heterocyclic Chromophore Amphiphiles and their Supramolecular Polymerization

Abstract Supramolecular polymerization of π‐conjugated amphiphiles in water is an attractive approach to create functional nanostructures. Here, we report on the synthesis, optoelectronic and electrochemical properties, aqueous supramolecular polymerization, and conductivity of polycyclic aromatic dicarboximide amphiphiles. The chemical structure of the model perylene monoimide amphiphile was modified with heterocycles, essentially substituting one fused benzene ring with thiophene, pyridine or pyrrole rings. All the heterocycle‐containing monomers investigated underwent supramolecular polymerization in water. Large changes to the monomeric molecular dipole moments led to nanostructures with low electrical conductivity due to diminished interactions. Although the substitution of benzene with thiophene did not notably change the monomer dipole moment, it led to crystalline nanoribbons with 20‐fold higher electrical conductivity, due to enhanced dispersion interactions as a result of the presence of sulfur atoms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Unidirectional Sidechain Engineering to Construct Dual‐Asymmetric Acceptors for 19.23 % Efficiency Organic Solar Cells with Low Energy Loss and Efficient Charge Transfer

Abstract Achieving both high open‐circuit voltage ( V oc ) and short‐circuit current density ( J sc ) to boost power‐conversion efficiency (PCE) is a major challenge for organic solar cells (OSCs), wherein high energy loss ( E loss ) and inefficient charge transfer usually take place. Here, three new Y‐series acceptors of mono‐asymmetric asy‐YC11 and dual‐asymmetric bi‐asy‐YC9 and bi‐asy‐YC12 are developed. They share the same asymmetric D 1 AD 2 (D 1 =thieno[3,2‐ b ]thiophene and D 2 =selenopheno[3,2‐ b ]thiophene) fused‐core but have different unidirectional sidechain on D 1 side, allowing fine‐tuned molecular properties, such as intermolecular interaction, packing pattern, and crystallinity. Among the binary blends, the PM6 : bi‐asy‐YC12 one has better morphology with appropriate phase separation and higher order packing than the PM6 : asy‐YC9 and PM6 : bi‐asy‐YC11 ones. Therefore, the PM6 : bi‐asy‐YC12‐based OSCs offer a higher PCE of 17.16 % with both high V oc and J sc , due to the reduced E loss and efficient charge transfer properties. Inspired by the high V oc and strong NIR‐absorption, bi‐asy‐YC12 is introduced into efficient binary PM6 : L8‐BO to construct ternary OSCs. Thanks to the broadened absorption, optimized morphology, and furtherly minimized E loss , the PM6 : L8‐BO : bi‐asy‐YC12‐based OSCs achieve a champion PCE of 19.23 %, which is one of the highest efficiencies among these annealing‐free devices. Our developed unidirectional sidechain engineering for constructing bi‐asymmetric Y‐series acceptors provides an approach to boost PCE of OSCs.

Chemistry↗
DOE OSTI2021

A refined design concept for sulfur-tolerant Pd catalyst supported on zeolite by shape-selective exclusion and hydrogen spillover for hydrogenation of aromatics

Sulfur poisoning of noble metal catalysts has been a major challenge for decades. This work demonstrates the superior sulfur tolerance of a hybrid zeolite-supported Pd catalyst for hydrogenation of tetralin containing benzothiophene. The hybrid catalyst consists of Pd supported on a large-pore acidic zeolite Y (Pd/HY) and a small-pore zeolite A without (Pd/HA) or with surface metal passivation by chemical vapor deposition of SiO 2 (SiO 2 -Pd/HA) and with potassium ion exchange (SiO 2 -Pd/KA). Pd/HY is very active for tetralin hydrogenation but quickly deactivates after exposure to benzothiophene at high concentration of 100 ppm sulfur. The SiO 2 -coated Pd/HA shows no activity for tetralin hydrogenation, but continues to activate H 2 and serve as a source of hydrogen spillover from Pd/HA since these metal sites are protected from thiophenic sulfur due to size-selective exclusion. Adding K ion-exchanged and SiO 2 -coated catalyst SiO 2 -Pd/KA to Pd/HY is even more effective for enhancing sulfur tolerance, both for tetralin hydrogenation and for isomerization of cis-decalin to trans-decalin in the presence of benzothiophene. The turnover frequencies (TOF) of all the catalysts are similar at the exposed sulfur/Pd atomic ratio of around 0.5. With further increase in sulfur/Pd ratio, rapid decline in TOF was observed on Pd/HY, but SiO 2 -Pd/KA + Pd/HY hybrid catalyst shows a significantly higher TOF than that over Pd/HY, even though SiO 2 -Pd/KA or SiO 2 -Pd/HA alone shows no TOF for tetralin hydrogenation. Even after high-dose poisoning at 400 ppm sulfur, the SiO 2 -Pd/KA + Pd/HY hybrid recovered activity more quickly than SiO 2 -Pd/HA + Pd/HY, while the latter in turn is much better than Pd/HY alone. These results point to the higher activity for hydrogen spillover from SiO 2 -Pd/KA where Pd metal sites are protected from not only thiophenic sulfur but also inorganic sulfur H 2 S by shape-selective exclusion. The present work further establishes the validity of shape-selective exclusion and hydrogen spillover in the design concept proposed for a sulfur-tolerant bimodal acidic zeolite-supported metal catalyst for hydrogenation of naphthalene [C.S. Song, Chemtech, 29 (1999) 26–30], and refines the design concept further for limiting the size of small pore in hybrid catalysts to~3 Å for restricting access of H 2 S but allowing entrance of H 2 . Further, this refined design concept is applicable to other supported monometallic and bimetallic catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

A comparative analysis of different van der Waals treatments for molecular adsorption on the basal plane of 2H-MoS 2

The binding energy of hydrogen sulfide, ammonia, ethane, ethylene, butadiene, benzene, toluene, pyridine, pyrrole, and thiophene on the basal plane of the semi-conducting 2H-molybdenum sulfide (MoS 2 ) was calculated with the following flavors of Density Functional Theory (DFT): GGA-PW91, PBE-D3, vdW-DF, optPBE, optB86b, optB88, vdW-TS, and BEEF-vdW. The GGA-PW91 binding energies are negligible (<0.07 eV in magnitude) in all cases. The predictions with vdW-DF and PBE-D3 are the closest (error <0.05 eV) to the isosteric heats of adsorption calculated from reported temperature programmed desorption data for thiophene and butadiene. For all dispersion flavors examined here, the magnitude of the dispersion contribution to the binding energy increases linearly with the number of heavy atoms in the adsorbate, with each atom contributing 0.05 eV (BEEF-vdW) – 0.09 eV (optB88-vdW). Further, this implies that the calculated adsorption constants of molecules larger than acridine (i.e., comprising > 14 non-heavy atoms) can vary by more than four orders of magnitude at industrial conditions depending on the chosen method of dispersion correction. Further, dispersion effects fall off rapidly (>0.03 eV/ non-hydrogen atom/Å) as the adsorbate-surface distance increases.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Impact of Side Chain Chemistry on Lithium Transport in Mixed Ion–Electron-Conducting Polymers

We discuss how typical design strategies for mixed ion-electron conduction in polymers have focused on overall ionic conductivity, without specificity for anion vs. cation conduction. Here, we demonstrate that side chain chemistry can be used to control Li+ conductivity in semiconducting polymers. This design principle is significant for applications which require Li+ specific transport, such as Li-ion batteries. We show that a polythiophene functionalized with an ionic liquid side chain demonstrates higher conductivity and lithium transference than a more commonly studied ether-functionalized P3AT derivative. Poly(3-(6’-(N-methylimidazolium) hexyl)thiophene TFSI–) (P3HT-Im+TFSI–) can solvate and conduct ions up to salt concentrations of r=1.0 (where r = [moles of salt]/[moles of monomer]) while achieving ionic conductivity of ≈10–3 S/cm at 80°C, and a lithium transference number of 0.36. On the other hand, poly(3¬-(methoxyethoxyethoxymethyl) thiophene) (P3MEEMT) shows a peak conductivity of ≈10–5 S/cm at r=0.05 and 80°C, with near zero lithium transport. This work shows that multiple high dielectric moieties can be used to drive ion conduction in semiconducting polymers, but diffuse, cationic side chains such as imidazolium are preferred for Li-ion conduction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Manipulating Two-Photon Absorption of Molecules through Efficient Optimization of Entangled Light

We report how the unique temporal and spectral features of pulsed entangled photons from a parametric downconversion source can be utilized for manipulating electronic excitations through the optimization of their spectral phase. A new comprehensive optimization protocol based on Bayesian optimization has been developed in this work to selectively excite electronic states accessible by two-photon absorption. Using our optimization method, the entangled two-photon absorption probability for a thiophene dendrimer can be enhanced by up to a factor of 20, while classical light turns out to be nonoptimizable. Moreover, the optimization involving photon entanglement enables selective excitation that would not be possible otherwise. In addition to optimization, we have explored entangled two-photon absorption in the small entanglement time limit showing that entangled light can excite molecular electronic states that are vanishingly small for classical light. As a result, we demonstrate these opportunities with an application to a thiophene dendrimer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

NEXAFS Spectroscopy of P3HT and PBTTT at the Sulfur K-Edge

The sulfur K-edge near-edge X-ray absorption fine-structure (NEXAFS) spectra of the common conjugated polymers P3HT and PBTTT are studied from both experimental and theoretical perspectives. Experimental angle-resolved spectra are measured to characterize both the dominant peaks and the dichroism of the polymers. First-principles calculations using the density functional theory-based many-body X-ray absorption spectroscopy (MBXAS) method are performed for the two polymers as well as for the thiophene and thienothiophene units that make up the conjugated backbones of these polymers. Through this combined approach, we are able to confidently assign the observed peaks to specific molecular orbitals and identify the orientation of their transition dipole moments (TDMs) with respect to the coordinate frame of the polymer backbone. Here, in particular, we are able to establish the character and orthogonal nature of the three main low-energy peaks at: (i) 2473.5 eV, 1s → (S–C)­π* with TDM along the π-stacking direction; (ii) 2474.1 eV, 1s → (S–C)­σ* with TDM along the backbone; and (iii) 2475.4 eV, 1s → (S–C)­σ* with TDM perpendicular to the first two. By performing both gas-phase and solid-state simulations, and with reference to the NEXAFS spectra of thiophene and thienothiophene building blocks, the influences of polymerization and molecular packing are also explored.

Chantler, Paul Alexander [Monash University, Clayt↗
DOE OSTI2022

Use of a Multiple Hydride Donor To Achieve an n-Doped Polymer with High Solvent Resistance

We report the ability to insolubilize doped semiconducting polymer layers can help enable the fabrication of efficient multilayer solution-processed electronic and optoelectronic devices. Here, we present a promising approach to simultaneously n-dope and largely insolubilize conjugated polymer films using tetrakis[{4-(1,3-dimethyl-2,3-dihydro-1H-benzo[d]imidazol-2-yl)phenoxy}methyl]methane (tetrakis-O-DMBI-H), which consists of four 2,3-dihydro-1H-benzoimidazole (DMBI-H) n-dopant moieties covalently linked to one another. Doping a thiophene-fused benzodifurandione-based oligo(p-phenylenevinylene)-co-thiophene polymer (TBDOPV-T) with tetrakis-O-DMBI-H results in a highly n-doped film with bulk conductivity of 15 S cm –1 . Optical absorption spectra provide evidence for film retention of ~93% after immersion in o-dichlorobenzene for 5 min. The optical absorption signature of the charge carriers in the n-doped polymer decreases only slightly more than that of the neutral polymer under these conditions, indicating that the exposure to solvent also results in negligible dedoping of the film. Moreover, thermal treatment studies on a tetrakis-O-DMBI-H-doped TBDOPV-T film in contact with another undoped polymer film indicate immobilization of the molecular dopant in TBDOPV-T. This is attributed to the multiple electrostatic interactions between each dopant tetracation and up to four nearby anionic doped polymer segments.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Screening of Coulombic Interactions To Achieve a Higher Power Factor in Conjugated Polymers

Thermoelectric properties of conducting polymers typically suffer from molecular chain disordering, as charge transport is predominantly controlled by morphology. This is especially more problematic when counterions are introduced to tune the carrier concentration for optimal thermoelectric performance, which disturbs the morphology further. Here, in this work, we introduce a new avenue for enhancing thermoelectric properties without needing to regulate the morphology, namely, by controlling the coulombic interaction between polarons and counterions. We perform in situ de-doping thermoelectric experiments over 3 orders of magnitude change in electrical conductivity of three distinct thermoelectric polymers, namely, poly(3-hexylthiophene-2,5-diyl) (P3HT), poly[2,5-bis(3-dodecylthiophen-2-yl)thieno[3,2-b]thiophene] (PBTTT-C 12 ), and poly[2,5-(2-octyldodecyl)-3,6-diketopyrrolopyrrole-alt-5,5-(2,5-di(thien-2-yl)thieno[3,2-b]thiophene)] (OD-PDPP2T-TT) conjugated polymers, followed by grazing-incidence wide-angle X-ray scattering (GIWAXS) to study their respective morphologies. We demonstrate a 9-fold enhancement in the thermoelectric power factor in OD-PDPP2T-TT compared to PBTTT-C 12 and link it to the coulombic screening of charge carriers, including in the optimally doped regime. We support this hypothesis using Boltzmann transport equations and show that, in both P3HT and PBTTT-C 12 , as the polymer is doped, impurity scattering remains the dominant scattering mechanism, while in OD-PDPP2T-TT, the scattering mechanism changes from impurity to acoustic phonon limited, resulting in more effective screening of ionized counterions. Our results provide an additional knob to enhance the fundamental understanding of thermoelectric physics of conducting polymers and provide a pathway to achieve higher performance in the field of organic thermoelectrics.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Electrolyte Immersion Increases Photoconductivity in a Model Polymer Photocathode

Immersing polymer solar cells in aqueous electrolyte for photoelectrochemical (PEC) hydrogen production is likely to cause photophysical changes that could present both challenges and opportunities for engineering functional and durable devices. Herein we study the bulk heterojunction blend poly(4,8-bis(5-(2-ethylhexyl)thiophen-2-yl)benzo[1,2-b:4,5-b']dithiophene-2,6-diyl)-alt-(2-(((2-ethylhexyl)oxy)carbonyl)-3-fluorothieno[3,4-b]thiophene-4,6-diyl):poly(N,N'-di(2-octyldodecyl)naphthalene-1,8:4,5-bis(dicarboximide)-2,6-diyl)-alt-(2,2-bithiophene-5,5'-diyl) (PTB7-Th:N2200) excited-state dynamics in electrolyte from femtosecond to millisecond time scales using pump-probe microwave conductivity and absorption spectroscopy. While the blend swells very little, electrolyte exposure increases the microwave-frequency mobility and possibly the yield of photogenerated charges while also decreasing crystallinity. These results indicate an enhancement in key performance metrics, implying that any limitations on the performance of PEC test devices do not arise from active layer-electrolyte interactions. For the PTB7-Th:N2200 blend or similar photocathode systems, our results indicate that improving the interfacial kinetics and/or the carrier lifetime should be prioritized, not protecting the active layer from the electrolyte. Since this observation may not be universal to all polymer systems, future research should focus on identifying their limiting photophysical processes. electrolyte.

14 SOLAR ENERGY↗