Search NASA⌕ Search

SEARCH · Search NASA

Results for “thiophosphate”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

54 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Layer-Dependent Magnetism and Spin Fluctuations in Atomically Thin van der Waals Magnet CrPS 4

van der Waals (vdW) magnets, an emerging family of two-dimensional (2D) materials, have received tremendous attention due to their rich fundamental physics and significant potential for cutting-edge technological applications. In contrast to the conventional bulk counterparts, vdW magnets exhibit significant tunability of local material properties, such as stacking engineered interlayer coupling and layer-number dependent magnetic and electronic interactions, which promise to deliver previously unavailable merits to develop multifunctional microelectronic devices. As a further ingredient of this emerging topic, here we report nanoscale quantum sensing and imaging of atomically thin vdW magnet chromium thiophosphate CrPS 4 , revealing its characteristic layer-dependent 2D static magnetism and dynamic spin fluctuations. We also show a large tunneling magnetoresistance in CrPS 4 -based spin filter vdW heterostructures. Here, the excellent material stability, robust strategy against environmental degradation, in combination with tailored magnetic properties highlight the potential of CrPS 4 in developing state-of-the-art 2D spintronic devices for next-generation information technologies.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Exploring the Electrochemical Stability Window of an All-Solid-State Composite Cathode via a Novel Operando Tender XPS Setup

All-solid-state batteries (ASSBs) have the potential to provide greater energy density than conventional batteries based on liquid electrolytes. Here, an operando ASSB cell setup for tender X-ray photoelectron spectroscopy (XPS) was developed, and the interface of a Ni-rich layered transition metal oxide cathode active material (CAM) and an Li 6 PS 5 Cl (LPSCl) solid electrolyte (SE) was evaluated during initial charge/discharge cycles. After validating the cell performance against a conventional pouch cell operated at high compression, intermittent galvanostatic cycling was performed, and XPS data were recorded as a function of state of charge (SOC). Upon the initial charge of the cell to ≈3.3 V Li , the LPSCl appears to decompose into LiCl, Li 3 PS 4 , and polysulfides, whose amount gradually increases with potential. Upon further charge, at a potential higher than ≈3.8 V Li , initially, present sulfate and sulfite impurities decompose, and at ≈74% SOC (corresponding to a cathode potential of ≈4.10 V Li ), surface reconstruction of the CAM particles due to lattice oxygen release is detected. In addition, at potentials beyond ≈4.6 V Li , a decrease of the S 1s counts of the sum of the LPSCl, the thiophosphate, and polysulfide species suggests the formation of elemental sulfur that is lost via sublimation into the vacuum chamber.

25 ENERGY STORAGE↗
DOE OSTI2020

Facile Oxide to Chalcogenide Conversion for Actinides Using the Boron–Chalcogen Mixture Method

Actinide chalcogenides are of interest for fundamental studies of the behavior of 5f electrons in actinides located in a soft ligand coordination environment. As actinides exhibit an extremely high affinity for oxygen, the synthesis of phase pure actinide chalcogenide materials free of oxide impurities is a great challenge and, moreover, requires the availability and use of oxygen free starting materials. Herein, we report a new method, the Boron-Chalcogen Mixture (BCM) method, for the synthesis of phase pure uranium chalcogenides based on the use of a boron/chalcogen mixture, where boron functions as an “oxygen sponge” to remove oxygen from an oxide precursor and where the elemental chalcogen effects transformation of the oxide precursor into an oxygen free chalcogenide reagent. Here, the boron oxide can be separated from the reaction mixture that is left to react to form the desired chalcogenide product. Several syntheses are presented that demonstrate the broad functionali-ty of the technique and thermodynamic calculations that show the underlying driving force are discussed. Specifically, three classes of chalcogenides that include both new (rare earth uranium sulfides and alkali-thorium thiophosphates) and previously reported compounds were prepared to validate the approach: binary uranium and thorium sulfides, oxide to sulfide transfor-mation in solid state reactions, and in situ generation of actinide chalcogenides in flux crystal growth reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Dimensional reduction upon calcium incorporation in Cs 0.3 (Ca 0.3 Ln 0.7 )PS 4 and Cs 0.5 (Ca 0.5 Ln 0.5 )PS 4

A series of Ca-containing lanthanide thiophosphates has been obtained and their structural evolution from 3D for LnPS 4 and Cs 0.3 (Ln 0.7 Ca 0.3 )PS 4 to 2D in Cs 0.5 (Ln 0.5 Ca 0.5 )PS 4 was shown as a function of Ca content. The first series with an idealized formula of Cs 0.3 (Ca 0.3 Ln 0.7 )PS 4 crystallizes in the R3¯m with combining macron]m space group and belongs to a new structure type that consists of a channel containing [(Ca 0.3 Ln 0.7 )PS 4 ] 0.3– framework, where the channels are occupied by severely disordered Cs + cations. A second new series with formula Cs 0.5 (Ca 0.5 Ln 0.5 )PS 4 crystallizes in the monoclinic C2/c space group and exhibits a layered structure consisting of [(Ca 0.5 Ln 0.5 )PS 4 ] 0.5– layers with Cs + cations located between the layers for charge balance. Together with the parent structure type, LnPS 4 , these three structure types illustrate how the LnPS 4 structure changes with Cs + cation incorporation, reducing its dimensionality from 3D to 2D. The magnetic properties of Cs 0.3 [(Ca 0.3 Ce 0.7 )PS 4 ] and Cs 0.3 [(Ca 0.3 Pr 0.7 )PS 4 ] were studied and revealed no magnetic transition down to 2 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Come for predictions, stay for complexity: synthesis and experimental probing of ionic conductivity in Li 9 B 19 S 33

Lithium thioborates, despite their potential cost-effectiveness and low density, have received considerably less attention as solid electrolytes compared to their thiophosphate counterparts. A primary obstacle to their widespread investigation has been the inherent challenge in synthesizing single-phase materials. Computational studies have predicted several lithium thioborate phases exhibiting high ionic conductivity, with Li 9 B 19 S 33 notably predicted to reach 80 mS cm −1 . However, experimental validation of these theoretical predictions remains absent. This work addresses this gap by detailing a successful synthesis of the previously elusive Li 9 B 19 S 33 phase, facilitated by in situ temperature dependent powder X-ray diffraction. Our findings reveal the peritectic nature of phase formation, necessitating an excess of boron sulfide in the reaction mixture. We further present a comprehensive structural characterization of Li 9 B 19 S 33 utilizing spectroscopic techniques like NMR, FT-IR, and diffuse reflectance and report on its ionic conductivity. Solid-state 6 Li NMR line narrowing experiments revealed an ion mobility activation energy of 0.26 eV whereas activation energies derived from impedance spectroscopy measurements were significantly higher, resulting in lower than theoretically predicted ionic conductivity.

Oppong, Richeal A. [Iowa State Univ., Ames, IA (Un↗
DOE OSTI2022

Emergence of ferrimagnetism in Li-intercalated NiPS 3

AbstractIntercalation has become a powerful approach to tune the intrinsic properties and introduce novel phenomena in layered materials. Intercalating van der Waals (vdW) magnetic materials is a promising route to engineer the low-dimensional magnetism. Recently, metal thiophosphates, MPX 3 , has been widely studied because their magnetic orders are highly tunable and persist down to the two-dimensional limit. In this work, we used electrochemical technique to intercalate Li into NiPS 3 single crystals and found the emergence of ferrimagnetism at low temperature in Li-intercalated NiPS 3 . Such tuning of magnetic properties highlights the effectiveness of intercalation, providing a novel strategy to manipulate the magnetism in vdW magnets.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Tuning magnetism in Ising-type van der Waals magnet FePS 3 by lithium intercalation

Recently, layered transition metal thiophosphate MPX 3 (M = transition metals, X = S or Se) have gained significant attention because of their rich magnetic, optical, and electronic properties. Specifically, the diverse magnetic structures and the robustness of magnetism in the two-dimensional (2D) limit have made them prominent candidates to study 2D magnetism. Numerous efforts such as substitutions and interlayer intercalations have been adopted to tune the magnetic properties of these materials, which has greatly deepened the understanding of the underlying mechanisms that govern the properties. In this work, we focus on modifying the magnetism of Ising-type antiferromagnet FePS 3 using electrochemical lithium intercalation. Furthermore, our work demonstrate the effectiveness of electrochemical intercalation as a controllable tool to modulating magnetism, including tuning magnetic ordering temperature and inducing low temperature spin-glass state, offering an approach for implementing this material into applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Highly sensitive spin-flop transition in antiferromagnetic van der Waals material M PS 3 ( M = Ni and Mn)

Recent developments in two-dimensional (2D) magnetism have motivated the search for van der Waals (vdW) magnetic materials to explore magnetic phenomena in the 2D limit. Metal thiophosphates, MPX 3 , are a class of magnetic vdW materials with antiferromagnetic ordering persisting down to the atomically thin limit. The magnetism in this material family has been found to be highly dependent on the choice of transition metal M. In this paper, we have synthesized the intermediate compounds Ni 1–x Mn x PS 3 (0 ≤ x ≤ 1) and investigated their magnetic properties. Our study reveals that the variation of Ni and Mn content in Ni 1–x Mn x PS 3 can efficiently tune the spin-flop transition, likely due to the modulation of the magnetic anisotropy. Such effective tuning offers a promising candidate to engineer 2D magnetism for future device applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Controlling magnetic exchange and anisotropy by nonmagnetic ligand substitution in layered 𝑀⁢P⁢𝑋 3 (𝑀 = Ni, Mn; 𝑋 = S, Se)

Recent discoveries in two-dimensional magnetism have intensified the investigation of van der Waals magnetic materials and further improved our ability to tune their magnetic properties. Tunable magnetism has been widely studied in antiferromagnetic metal thiophosphates 𝑀⁢P⁢𝑋 3 . Substitution of metal ions 𝑀 has been adopted as an important technique to engineer the magnetism in 𝑀⁢P⁢𝑋 3 . In this work, we have studied the previously unexplored chalcogen 𝑋 substitutions in 𝑀⁢P⁢𝑋 3 (𝑀 = Mn/Ni; 𝑋 = S/Se). We synthesized the single crystals of MnP⁢S 3−𝑥 ⁢Se 𝑥 (0 ≤ 𝑥 ≤ 3) and NiP⁢S 3−𝑥 ⁢Se 𝑥 (0 ≤ 𝑥 ≤ 1.3) and investigated the systematic evolution of the magnetism with varying 𝑥. Our study reveals the effective tuning of magnetic interactions and anisotropies in both MnPS 3 and NiPS 3 upon Se substitution. Such efficient engineering of the magnetism provides a suitable platform to understand the low-dimensional magnetism and develop future magnetic devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS1983

Semiconductor photoelectrochemistry

Semiconductor photoelectrochemical reactions are investigated. A model of the charge transport processes in the semiconductor, based on semiconductor device theory, is presented. It incorporates the nonlinear processes characterizing the diffusion and reaction of charge carriers in the semiconductor. The model is used to study conditions limiting useful energy conversion, specifically the saturation of current flow due to high light intensity. Numerical results describing charge distributions in the semiconductor and its effects on the electrolyte are obtained. Experimental results include: an estimate rate at which a semiconductor photoelectrode is capable of converting electromagnetic energy into chemical energy; the effect of cell temperature on the efficiency; a method for determining the point of zero zeta potential for macroscopic semiconductor samples; a technique using platinized titanium dioxide powders and ultraviolet radiation to produce chlorine, bromine, and iodine from solutions containing their respective ions; the photoelectrochemical properties of a class of layered compounds called transition metal thiophosphates; and a technique used to produce high conversion efficiency from laser radiation to chemical energy.

Buoncristiani, A. M.↗
DOE OSTI2021

Lithium and sodium superionic conductors

Presented are new, earth-abundant lithium superionic conductors, Li3Y(PS4)2 and L15PS4Cl2, that emerged from a comprehensive screening of the Li—P—S and Li—M—P—S chemical spaces. Both candidates are derived from the relatively unexplored quaternary silver thiophosphates. One key enabler of this discovery is the development of a first-of-its-kind high-throughput first principles screening approach that can exclude candidates unlikely to satisfy the stringent Li+ conductivity requirements using a minimum of computational resources. Both candidates are predicted to be synthesizable, and are electronically insulating. Systems and methods according to present principles enable new, all-solid-state rechargeable lithium-ion batteries.

Zhu, Zhuoying↗
DOE OSTI2023

Lithium and sodium superionic conductors

Presented are new, earth-abundant lithium superionic conductors, Li 3 Y(PS 4 ) 2 and Li 5 PS 4 Cl 2 , that emerged from a comprehensive screening of the Li—P—S and Li-M-P—S chemical spaces. Both candidates are derived from the relatively unexplored quaternary silver thiophosphates. One key enabler of this discovery is the development of a first-of-its-kind high-throughput first principles screening approach that can exclude candidates unlikely to satisfy the stringent Li+ conductivity requirements using a minimum of computational resources. Both candidates are predicted to be synthesizable, and are electronically insulating. Systems and methods according to present principles enable new, all-solid-state rechargeable lithium-ion batteries.

Zhu, Zhuoying↗
DOE OSTI2020

Glass transition temperature studies of planetary ball milled glasses: Accessing the rapidly cooled glassy state in Na 4 P 2 S 7-x O x , 0 ≤ x ≤ 7, Oxy-thio phosphate glasses

This paper details the very first in-depth study of the glass transition temperature (T g ) for planetary balled milled (PBM) Na 4 P 2 S 7-x O x (NaPSO), where 0 ≤ x ≤ 7, glasses. For 0 ≤ x ≤ 5, fully amorphous, homogeneous, and chemically reacted compositions can be prepared. For samples with 5 < x ≤ 7, partially amorphous but fully chemically reacted glass-ceramics can be produced. The reproducible, thermally cyclable onset T g and the onset crystallization temperature, T c , were investigated as a function of the composition and of the short-range order (SRO) structures of the glasses. Additionally, we examined the extreme sub-T g exothermic relaxations present due to the high energy milling processing and correspondingly high effective quenching rate. Using a differential scanning calorimeter (DSC) and scanning from well below the onset T g , the glasses are observed to relax exothermally below T g . The integrated relaxation enthalpy, ΔH rel , is ~ 0 for the x = 2 glass, but is significantly exothermic for lower and higher values of x. Once the high fictive state of these glasses has been erased by scanning to above the T g , but below the T c of the glass, the DSC scans of the glasses recover normal behavior for a normally cooled glass without any relaxation exotherm. The T g s of these glasses remain relatively constant for 0 ≤ x ≤ 3, but for glasses with 3 < x ≤ 5, T g increases sharply following the combined effects of the phosphate chain length increasing caused by the formation of bridging oxygens and the increasing concentration of more charge dense non-bridging oxygens (NBOs). For x > 5, both T g and Tc decrease sharply, becoming nearly identical at x = 7 where glass formation essentially ceases. For smaller values of x, T c increases with both chain length and the structural complexity of the composition but decreases sharply for glass-ceramics of x > 5.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Local Strain and Polarization Mapping in Ferrielectric Materials

CuInP 2 S 6 (CIPS) is a van der Waals material that has attracted attention because of its unusual properties. Recently, a combination of density functional theory (DFT) calculations and piezoresponse force microscopy (PFM) showed that CIPS is a uniaxial quadruple-well ferrielectric featuring two polar phases and a total of four polarization states that can be controlled by external strain. In this study, we combine DFT and PFM to investigate the stress-dependent piezoelectric properties of CIPS, which have so far remained unexplored. The two different polarization phases are predicted to differ in their mechanical properties and the stress sensitivity of their piezoelectric constants. This knowledge is applied to the interpretation of ferroelectric domain images, which enables investigation of local strain and stress distributions. The interplay of theory and experiment produces polarization maps and layer spacings which we compare to macroscopic X-ray measurements. We found that the sample contains only the low-polarization phase and that domains of one polarization orientation are strained, whereas domains of the opposite polarization direction are fully relaxed. The described nanoscale imaging methodology is applicable to any material for which the relationship between electromechanical and mechanical characteristics is known, providing insight on structural, mechanical, and electromechanical properties down to ~10 nm length scales.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Ionic Control over Ferroelectricity in 2D Layered van der Waals Capacitors

The van der Waals layered material CuInP 2 S 6 features interesting functional behavior, including the existence of four uniaxial polarization states, polarization reversal against the electric field through Cu ion migration, a negative-capacitance regime, and reversible extraction of Cu ions. At the heart of these characteristics lies the high mobility of Cu ions, which also determines the spontaneous polarization. Therefore, Cu migration across the lattice results in unusual ferroelectric behavior. Here, we demonstrate how the interplay of polar and ionic properties provides a path to ionically controlled ferroelectric behavior, achieved by applying selected DC voltage pulses and subsequently probing ferroelectric switching during fast triangular voltage sweeps. Using current measurements and theoretical calculations, we observe that increasing DC pulse duration results in higher ionic currents, the buildup of an internal electric field that shifts polarization loops, and an increase in total switchable polarization by ~50% due to the existence of a high polarization phase which is stabilized by the internal electric field. Apart from tuning ferroelectric behavior by selected square pulses, hysteretic polarization switching can even be entirely deactivated and reactivated, resulting in three-state systems where polarization switching is either inhibited or can be performed in two different directions.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Revealing Fast Cu-Ion Transport and Enhanced Conductivity at the CuInP 2 S 6 –In 4/3 P 2 S 6 Heterointerface

Van der Waals layered ferroelectrics, such as CuInP 2 S 6 (CIPS), offer a versatile platform for miniaturization of ferroelectric device technologies. Control of the targeted composition and kinetics of CIPS synthesis enables the formation of stable self-assembled heterostructures of ferroelectric CIPS and nonferroelectric In 4/3 P 2 S 6 (IPS). Here, we use quantitative scanning probe microscopy methods combined with density functional theory (DFT) to explore in detail the nanoscale variability in dynamic functional properties of the CIPS-IPS heterostructure. Within, we report evidence of fast ionic transport which mediates an appreciable out-of-plane electromechanical response of the CIPS surface in the paraelectric phase. Further, we map the nanoscale dielectric and ionic conductivity properties as we thermally stimulate the ferroelectric-paraelectric phase transition, recovering the local dielectric behavior during this phase transition. Finally, aided by DFT, we reveal a substantial and tunable conductivity enhancement at the CIPS/IPS interface, indicating the possibility of engineering its interfacial properties for next generation device applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Correlative piezoresponse and micro-Raman imaging of CuInP 2 S 6 –In 4/3 P 2 S 6 flakes unravels phase-specific phononic fingerprint via unsupervised learning

Characterizing the novel properties of layered van der Waals materials is key for their application in functional devices. A better understanding of this type of material requires correlative imaging of diverse nanoscale material properties. Within this class of materials, CuInP 2 S 6 (CIPS) has received a significant degree of interest due to its ionically mediated room temperature ferroelectricity. Moreover, it is possible to form stable self-assembled heterostructures of ferroelectric CuInP 2 S 6 (CIPS) and non-ferroelectric (i.e., lacking Cu) In 4/3 P 2 S 6 (IPS) phases, by controlling the targeted composition and kinetics of synthesis. In this work, we present a correlative nanometric imaging study of the phononic modes and piezoelectricity of the phase-separated thin heteroepitaxial CIPS/IPS flakes. Here, we show that it is possible to isolate the different phononic modes of the two phases by spatially correlating them with their distinct ferroelectric behavior. The coupling of our experimental data with unsupervised learning statistical methods enables unraveling specific Raman peaks that are characteristic of each chemical phase (CIPS and IPS) present in the composite sample, discarding the less significant ones.

correlative microscopy↗
DOE OSTI2020

Strongly adhesive dry transfer technique for van der Waals heterostructure

That one can stack van der Waals materials with atomically sharp interfaces has provided a new material platform of constructing heterostructures. The technical challenge of mechanical stacking is picking up the exfoliated atomically thin materials after mechanical exfoliation without chemical and mechanical degradation. Chemically inert hexagonal boron nitride (hBN) has been widely used for encapsulating and picking up vdW materials. However, due to the relatively weak adhesion of hBN, assembling vdW heterostructures based on hBN has been limited. Here, we report a new dry transfer technique. We used two vdW semiconductors (ZnPS 3 and CrPS 4 ) to pick up and encapsulate layers for vdW heterostructures, which otherwise are known to be hard to fabricate. By combining with optimized polycaprolactone (PCL) providing strong adhesion, we demonstrated various vertical heterostructure devices, including quasi-2D superconducting NbSe 2 Josephson junctions with atomically clean interface. The versatility of the PCL-based vdW stacking method provides a new route for assembling complex 2D vdW materials without interfacial degradation.

36 MATERIALS SCIENCE↗