Search NASA⌕ Search

SEARCH · Search NASA

Results for “three component”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Regional patterns in hydrologic response, a new three-component metric for hydrograph analysis and implications for ecohydrology, Northwest Volcanic Aquifer Study Area, USA

Spatial patterns of hydrologic response were examined for the Northwest Volcanic Aquifer Study Area (NVASA). The utility of established hydrograph-separation methods for assessing hydrologic response in permeable volcanic terranes was assessed and a new three-component metric for hydrograph analysis was developed. The new metric, which partitions streamflow into subcomponents defined by the timescales of hydrologic response (e.g., fast-runoff, intermediate-interflow and slow-baseflow), was used to gain a fundamental understanding of the regional hydrology, investigate sub-regional differences, influencing factors, and ecohydrological implications. The combined effects of NVASA’s physiography, climate and geology create a strongly coupled surface-groundwater system that produces copious baseflow and limited quantities of runoff and interflow. Patterns of hydrologic response are influenced by the type and rate of precipitation and permeability of the underlying geology. Under variable precipitation conditions the hydrologic response of volcanic terranes with similar permeability and subsurface-storage capacity can be significantly different. From a water management and ecohydrology perspective, understanding regional patterns of hydrologic response and sub-regional differences is fundamental. Results indicate that minimum-flow methods provide the most conservative estimate of baseflow and may be the most robust for filtering out snowmelt bias in baseflow estimates. Baseflow contributes ~75% of the perennial streamflow across the NVASA and represents a critical component of the regional water supply that provides critical cold-water habitat.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1992

Three-Component Laser Velocimetry Of Complex Flows

Since aeronautical research community depends on computations, to extent that predictions of flow-field behavior used without supporting data, question arises whether predictions of complex flow fields represent real world. In experiment, laser velocimetry used to validate computed predictions of complex flow fields. Results demonstrated capabilities of orthogonal three-component laser velocimeter to obtain data necessary to validate computational codes used.

Meyers, James F.↗
NASA NTRS1982

A three-component model of the variability of the solar ultraviolet flux 145-200 nM

The variability of the ultraviolet flux between 145 and 200 nm over both the eleven-year cycle and the 27-day solar rotation period is examined in terms of chromospheric activity, as determined from ground-based observations of the CaII K chromosphere. A three-component model of the solar UV flux is developed which includes the contributions to the full disk flux from both plage and active network emission. Solar cycle and solar rotation variations derived from the model are compared with the results of satellite and rocket experiments and with the two-component model of Cook et al (1980). Finally, possible ways of improving the model are discussed.

Lean, J. L.↗
DOE OSTI2022

Unsupervised learning from three-component accelerometer data to monitor the spatiotemporal evolution of meso-scale hydraulic fractures

Enhanced geothermal systems can provide a substantial share of the global energy demand. There exist several hurdles in the engineering implementations of such geothermal systems. One such hurdle is the accurate monitoring of the fracture networks created in subsurface through hydraulic stimulation of these systems. Micro seismicity associated with the stimulation is the primary means to locate the event hypocenters for estimating the stimulated rock volume. Existing methods for location the hypocenters are restricted to only the highest amplitude impulsive signals that are simultaneously detected on several sensors. Consequently, a large portion (usually ~99%) of the measurements are left unused. In this paper, an unsupervised manifold-approximation followed by clustering of 3-component accelerometer data is used to analyze the seismicity recorded on a monitoring well. With this method, a larger portion of the measured signal is used for the monitoring of the hydraulic fracture network. We analyze the EGS Collab experiment 1 microseismic data, recorded at the Sanford Underground Research Facility, South Dakota. Using the data from a single three-component accelerometer, the polarization features viz. Azimuth, incidence, rectilinearity, and planarity are used as inputs for the unsupervised manifold approximation followed by clustering. Our study shows that density-based clusters in the projected 3D space correspond to distinct types of hydraulically fractured zones around the injection point. Finally, we show that the temporal evolution of these clusters can be used to track fracture creation and propagation.

58 GEOSCIENCES↗
NASA NTRS2002

Measurement of Meteor Impact Experiments Using Three-Component Particle Image Velocimetry

The study of hypervelocity impacts has been aggressively pursued for more than 30 years at Ames as a way to simulate meteoritic impacts. Development of experimental methods coupled with new perspectives over this time has greatly improved the understanding of the basic physics and phenomenology of the impact process. These fundamental discoveries have led to novel methods for identifying impact craters and features in craters on both Earth and other planetary bodies. Work done at the Ames Vertical Gun Range led to the description of the mechanics of the Chicxualub crater (a.k.a. K-T crater) on the Yucatan Peninsula, widely considered to be the smoking gun impact that brought an end to the dinosaur era. This is the first attempt in the world to apply three-component particle image velocimetry (3-D PIV) to measure the trajectory of the entire ejecta curtain simultaneously with the fluid structure resulting from impact dynamics. The science learned in these experiments will build understanding in the entire impact process by simultaneously measuring both ejecta and atmospheric mechanics.

Heineck, James T.↗
DOE OSTI2023

Towards Integrating Data Quality Assessments and Radiometer Uncertainty for Determining the Expanded Uncertainty of Three-Component Solar Radiation Measurements

Accurate solar irradiance data are fundamental for determining the design and performance characteristics of photovoltaic systems. The uncertainty of solar irradiance measurements depends on many factors including radiometer design, calibration, installation, maintenance, and operational environment. The key contributors to this uncertainty can be classified as the measurement uncertainty of a particular radiometer and the operational uncertainty determined for the time of measurement. Radiometer measurement uncertainty estimates (U R ) can be based on well-established methods used as part of the radiometer calibration process. Estimates of operational uncertainties (U o ) require consideration of additional site-specific factors that affect data quality. A method is needed for establishing the accuracy of solar irradiance data by integrating an existing data quality process and measurement uncertainty estimates for specific radiometers. An algorithm has been developed to integrate data quality analyses and measurement uncertainty estimates for three-component solar irradiance data: global horizontal (total hemispheric) irradiance, direct normal (beam) irradiance, and diffuse horizontal (sky) irradiance collected at one- to 60-minute intervals. The algorithm has been tested using one-minute irradiance measurements. The goal of the project is to distribute a user-friendly software package based on the new algorithm.

data integrity↗
DOE OSTI2022

Simulation and Reynolds-averaged Navier-Stokes modeling of a three-component Rayleigh-Taylor mixing problem with thermonuclear burn

Rayleigh-Taylor mixing in the presence of a third component with intermediate density is investigated through three-dimensional large-eddy simulation (LES) with a high-order compact finite-difference code. Two configurations are considered: (1) a symmetric configuration in which the Atwood number between the heavy and intermediate components matches the Atwood number between the intermediate and light components and (2) an asymmetric configuration in which the Atwood number between the heavy and intermediate components is an order of magnitude greater than the Atwood number between the intermediate and light components. Mass fraction covariances are extracted, and proposed Reynolds-averaged Navier-Stokes (RANS) closures for density-specific-volume and density-mass-fraction covariances are evaluated in an a priori fashion. Additionally, a multicomponent extension of the k - Φ - L - a - V RANS model [Morgan, Phys. Rev. E 104, 015107 (2021)] is presented which includes model equations for the upper-triangular elements of the mass fraction covariance matrix. This model, referred to as the k - Φ - L - a - C model, is compared against results from LES and against other RANS models. Profiles of average mass fraction, mass-fraction covariance, and density-specific-volume covariance obtained with the k - Φ - L - a - C model are found to agree well with LES data. Finally, the impact of three-component turbulent mixing on average reaction rate is investigated in both premixed and nonpremixed cases by heating the mixing layer and allowing it to undergo thermonuclear (TN) burn. A closure model for average reaction rate is proposed for use with the k - Φ - L - a - C model, and when this model is applied, improved agreement is obtained between LES and RANS in total TN neutron production.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1986

Three component plasma electron distribution in the intermediate ionized coma of Comet Giacobini-Zinner

The observation of three distinct components of the electron distribution function measured in the intermediate ionized coma (IIC) and plasma tail of Comet Giacobini-Zinner is reported. It is believed that the cold component represents electrons produced close to the comet nucleus by ionization of cometary matter and subsequent cooling by Coulomb collisions. The second component also appears to be composed of electrons produced by photoionization of cometary neutrals, but sufficiently far from the nucleus that the distributions are largely unaffected by Coulomb interactions. The hot component is probably a population of electrons originating in the solar wind. Throughout the IIC, the electrostatic potential of the spacecraft was very low (less than 0.8 eV), implying that ICE generated very little impact-produced plasma during its passage.

Zwickl, R. D.↗
NASA NTRS1986

Combined fringe and Fabry-Perot laser anemometer for three component velocity measurements in turbine stator cascade facility

A laser anemometer is described that was developed for use in a 508 mm diameter annular turbine stator cascade facility. All three velocity components are measured through a single restricted optical port, both within the stator vane row and downstream of the vanes. The measurements are made through a cylindrical window in the casing that matches the tip radius of the cascade. The stator tested has a contoured hub endwall that results in a large radial flow near the hub. The anemometer uses a standard fringe configuration (LFA) with a fluorescent aerosol seed to measure the axial and circumferential velocity components. The radial component is measured with a confocal Fabry-Perot interferometer. The two configurations are combined in a single optical system and can operate simultaneously. Data are presented to illustrate the capabilities of the system.

Seasholtz, R. G.↗
NASA NTRS1988

Three component laser anemometer measurements in an annular cascade of core turbine vanes with contoured end wall

The three mean velocity components were measured in a full-scale annular turbine stator cascade with contoured hub end wall using a newly developed laser anemometer system. The anemometer consists of a standard fringe configuration using fluorescent seed particles to measure the axial and tangential components. The radial component is measured with a scanning confocal Fabry-Perot interferometer. These two configurations are combined in a single optical system that can operate simultaneously in a backscatter mode through a single optical access port. Experimental measurements were obtained both within and downstream of the stator vane row and compared with calculations from a three-dimensional inviscid computer program. In addition, detailed calibration procedures are described that were used, prior to the experiment, to accurately determine the laser beam probe volume location relative to the cascade hardware.

Goldman, Louis J.↗
NASA NTRS1974

Approximate spin projection of three-component UHF wavefunctions - The states of the pentachlorocyclopentadienyl cation and the croconate dianion, C5O5/2-/

The approximate spin projection method of Amos et al. is extended to handle UHF wave functions having three significant components of differing multiplicity. An expression is given for the energy after single annihilation which differs from that of Amos and Hall. The new expression reproduces the results obtained from a previous exact calculation for which the weights and energies of the components are known. The extended approximate projection method is applied to the pi-electron UHF wave functions for the ground states of the pentachlorocyclopentadienyl cation and the croconate dianion, C5O5(2-). The results indicate a triplet ground state for the former and a singlet ground state for the latter, in agreement with experimental ESR susceptibility measurements for these molecular ions. C5C15(-) cannont be treated by restricted Hartree-Fock theory, due to its open-shell ground state. Incorrect results are obtained for the croconate dianion, if restricted Hartree-Fock theory and singly excited configuration interactions are utilized.

Phillips, D. H.↗
DOE OSTI2025

A simple three-component mixing problem for the evaluation of a new reaction rate model

A simple computational mixing problem is presented which can be utilized to assess the behavior of Reynolds-averaged reaction rate models in a problem with temporally varying mixedness. In this problem, three mixing components are homogeneously distributed but initially separated in a triply periodic domain. Further, these components are initialized within a Taylor–Green-like velocity field, which creates a mixing history evolving from the so-called “no-mix limit” to a well-mixed state. Large-eddy simulation results from this problem in configurations involving both premixed and nonpremixed reactants are then compared with zero-dimensional Reynolds-averaged Navier–Stokes results utilizing a new model for multicomponent reacting mixtures. The new model is shown to appropriately respect the no-mix limit and outperforms an earlier model (Morgan, 2022), particularly at early times when components are near the no-mix limit.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS1993

Modifications to the three-component classification algorithm for SAR data

Previously, a scattering model was used to classify SAR data as due to three mechanisms: surface or odd-bounce scattering; double-bounce scattering; and volume scattering. A Bragg rough-surface model was used for odd-bounce scattering, and two reflecting surfaces, as in a dihedral corner reflector, represented the double-bounce scattering mechanism. A random collection of infinitely thin cylinders was used to model the volume scattering contribution. It was assumed that the cylinders are uniformly oriented in all directions. In this work, modifications are made to the above model, which include specifying a preferred orientation for the cylinders representing branches and using thin cylinders of finite thickness as opposed to infinitely thin ones. In the first case, the preferred orientation is represented by a probability density function in the form of a dirac delta function. For the second case, small argument asymptotic expansions of Bessel functions are used to express the volume scattering contributions in terms of quantities containing the average radius of the cylinders. Since in each case the number of unknowns exceeds that of equations, simplifying assumptions are made. The solutions are applied to multifrequency polarimetric SAR data to obtain the new unknowns in addition to the relative contributions of each scattering mechanism. Several results are presented. It is found that the calculated percentage of each mechanism does not change significantly compared to the original model; however, additional information is gained about the scatterers.

Moghaddam, M.↗
NASA NTRS1979

Three component velocity measurements in an upper surface blowing configuration

In four recent papers, results of an experimental investigation of a freely expanding coflowing jet as well as a three dimensional wall jet have been presented. A flat plate and a curved wall surface modelling a wing-flap combination in a high lift V/STOL configuration have been documented as to their effects on the flow field. The ratio of the jet exit plane velocity to the free stream velocity was varied from 5.1 to 10.9 to 1. This report continues the documentation of the three dimensional wall jet with special emphasis on the vertical and lateral mean and fluctuating velocities. Additionally, boundary layer profiles over both the flat plate and the flap are presented.

Catalano, G. D.↗
NASA NTRS1982

Effect of aluminum phosphate additions on composition of three-component plasma-sprayed solid lubricant

Image analysis (IA) and electron microprobe X-ray analysis (EMXA) were used to characterize a plasma-sprayed, self-lubricating coating, NASA LUBE PS106, specified by weight percent as 35NiCr-35Ag-30CaF2. To minimize segregation of the powder mixture during the plasma-spraying procedure, monoaluminum phosphate was added to form agglomerate particles. Three concentrations of AlPO4 were added to the mixtures: 1.25, 2.5, and 6.25 percent by weight. Analysis showed that 1.25 wt% AlPO4 yielded a CaF2 deficiency, 2.5 wt% kept the coating closest to specification, and 6.25 wt% yielded excess CaF2 as well as more impurities and voids and a deficiency in silver. Photomicrographs and X-ray maps are presented. The methods of IA and EMXA complement each other, and the reasonable agreement in the results increases the confidence in determining the coating composition.

Jacobson, T. P.↗
DOE OSTI2022

(CAAC)Copper Catalysis Enables Regioselective Three-Component Carboboration of Terminal Alkynes

Here, cyclic(alkyl)(amino)carbene (CAAC) ligands are found to perturb regioselectivity of the copper-catalyzed carboboration of terminal alkynes, favoring the less commonly observed internal alkenylboron regiosomer through an α-selective borylcupration step. A variety of carbon electrophiles participate in the reaction, including allyl alcohols derivatives and alkyl halides. The method provides a straightforward and selective route to versatile tri-substituted alkenylboron compounds that are otherwise challenging to access.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗