Search NASA⌕ Search

SEARCH · Search NASA

Results for “tight junction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1998

Carbon Nanotube Based Molecular Electronics

Carbon nanotubes and the nanotube heterojunctions have recently emerged as excellent candidates for nanoscale molecular electronic device components. Experimental measurements on the conductivity, rectifying behavior and conductivity-chirality correlation have also been made. While quasi-one dimensional simple heterojunctions between nanotubes with different electronic behavior can be generated by introduction of a pair of heptagon-pentagon defects in an otherwise all hexagon graphene sheet. Other complex 3- and 4-point junctions may require other mechanisms. Structural stability as well as local electronic density of states of various nanotube junctions are investigated using a generalized tight-binding molecular dynamics (GDBMD) scheme that incorporates non-orthogonality of the orbitals. The junctions investigated include straight and small angle heterojunctions of various chiralities and diameters; as well as more complex 'T' and 'Y' junctions which do not always obey the usual pentagon-heptagon pair rule. The study of local density of states (LDOS) reveal many interesting features, most prominent among them being the defect-induced states in the gap. The proposed three and four pointjunctions are one of the smallest possible tunnel junctions made entirely of carbon atoms. Furthermore the electronic behavior of the nanotube based device components can be taylored by doping with group III-V elements such as B and N, and BN nanotubes as a wide band gap semiconductor has also been realized in experiments. Structural properties of heteroatomic nanotubes comprising C, B and N will be discussed.

Srivastava, Deepak↗
NASA NTRS1997

Carbon Nanotubes: Molecular Electronic Components

The carbon Nanotube junctions have recently emerged as excellent candidates for use as the building blocks in the formation of nanoscale molecular electronic networks. While the simple joint of two dissimilar tubes can be generated by the introduction of a pair of heptagon-pentagon defects in an otherwise perfect hexagonal graphene sheet, more complex joints require other mechanisms. In this work we explore structural characteristics of complex 3-point junctions of carbon nanotubes using a generalized tight-binding molecular-dynamics scheme. The study of pi-electron local densities of states (LDOS) of these junctions reveal many interesting features, most prominent among them being the defect-induced states in the gap.

Srivastava, Deepak↗
DOE OSTI2023

Junctions and Superconducting Symmetry in Twisted Bilayer Graphene

Junctions provide a wealth of information on the symmetry of the order parameter of superconductors. Here, we analyze junctions between a scanning tunneling microscope (STM) tip and superconducting twisted bilayer graphene (TBG) and TBG Josephson junctions (JJs). We compare superconducting phases that are even or odd under valley exchange (s- or ƒ-wave). The critical current in mixed (s and ƒ) JJs strongly depends on the angle between the junction and the lattice. In STM-TBG junctions, due to Andreev reflection, the ƒ-wave leads to a prominent peak in subgap conductance, as seen in experiments.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1967

Feed-through connector couples RF power into vacuum chamber

Feed-through device connects RF power to an RF coil in a vacuum chamber. The coil and leads are water cooled and vacuum tight seals are provided at the junctions. The device incorporates silver soldered copper tubes, polytetrafluoroethylene electrical insulators, and O-ring vacuum seals.

Grandy, G. L.↗
NASA NTRS1972

High power microwave components for space communications satellite

Analyzed, developed, and tested were high power microwave components for communications satellites systems. Included were waveguide and flange configurations with venting, a harmonic filter, forward and reverse power monitors, electrical fault sensors, and a diplexer for two channel simultaneous transmission. The assembly of 8.36 GHz components was bench tested, and then operated for 60 hours at 3.5 kW CW in a high vacuum. The diplexer was omitted from this test pending a modification of its end irises. An RF leakage test showed only that care is required at flange junctions; all other components were RF tight. Designs were extrapolated for 12 GHz and 2.64 GHz high power satellite systems.

Jankowski, H.↗
DOE OSTI2023

Logical Majorana zero modes in a nanowire network

We present a scheme to use physical Majorana quasizero modes at each junction of a two-dimensional nanowire network to build a logical Majorana zero mode, the location of which is controllable through gate voltages. The wire network is a way to realize a recent proposal to imprint a Kekulé vortex pattern on a honeycomb lattice via gate voltages. We show that a specific type of junction, other than a naive Y or T junction, is needed to realize, without breaking time-reversal symmetry, an artificial “graphene” system with Majorana fermions instead of complex ones at each site. The junction we propose (i) traps exactly one physical Majorana (quasi)zero mode at each site of either a brick wall or honeycomb lattice and (ii) allows this mode to hybridize with all three neighboring sites. Using a lattice of these junctions and starting from an electronic, tight-binding model for the wires, we imprint the voltage patterns corresponding to the Kekulé vortex and observe the emergence of the logical Majorana zero mode at the vortex core. By suitable adiabatic modulations of gate voltages as a function of time, the positions of individual Kekulé vortices can be moved, and in this manner, non-Abelian braiding of the logical Majoranas bound to the vortex cores can be performed. We provide the range of parameters where these excitations could be realized experimentally.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1998

Fullerene Derived Molecular Electronic Devices

The carbon Nanotube junctions have recently emerged as excellent candidates for use as the building blocks in the formation of nanoscale electronic devices. While the simple joint of two dissimilar tubes can be generated by the introduction of a pair of heptagon-pentagon defects in an otherwise perfect hexagonal grapheme sheet, more complex joints require other mechanisms. In this work we explore structural and electronic properties of complex 3-point junctions of carbon nanotubes using a generalized tight-binding molecular-dynamics scheme.

Menon, Madhu↗
NASA NTRS1998

Observation and Modeling of Single Wall Carbon Nanotube Bend Junctions

Single wall carbon nanotube (SWNT) bends, with diameters from approx. 1.0 to 2.5 nm and bend angles from 18 deg. to 34 deg., are observed in catalytic decomposition of hydrocarbons at 600 - 1200 C. An algorithm using molecular dynamics simulation (MD) techniques is developed to model these structures that are considered to be SWNT junctions formed by topological defects (i.e. pentagon-heptagon pairs). The algorithm is used to predict the tube helicities and defect configurations for bend junctions using the observed tube diameters and bend angles. The number and arrangement of the defects at the junction interfaces are found to depend on the tube helicities and bend angle. The structural and energetic calculations using the Brenner potential show a number of stable junction configurations for each bend angle with the 34 deg. bends being more stable than the others. Tight binding calculations for local density of state (LDOS) and transmission coefficients are carried out to investigate electrical properties of the bend junctions.

Han, Jie↗
DOE OSTI2025

Single-Molecule Conductance through Hybrid Radially and Linearly π-Conjugated Macromolecules Reveals an Unusual Intramolecular π-Interaction

We describe the design, synthesis, and single-molecule junction conductance of π-electron molecules bearing both radial and linear π-conjugation pathways, whereby cycloparaphenylene (CPP) radial cores are π-extended linearly with aryl alkyne substituents as models for previously reported CPP-arylene ethynylene conjugated polymers. Although radially and linearly conjugated molecules have been studied previously in isolation as junction-bridging molecular electronic units, this is the first study to examine molecules where both topologies are operative. Our results reveal that the presence of radial CPP components within the junction-spanning pathway leads to a reduction in the conductance of the backbone compared to model linear phenyl substituents. Through tight-binding and DFT-based calculations, we attribute this conductance change to intramolecular van der Waals (vdW) interactions between the CPP ring and the junction-spanning arylene-ethynylene molecular backbone. These interactions induce changes in the dihedral angles of the backbone, leading to a reduced overlap of π orbitals within the molecular junction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1998

Electronic Properties of Carbon Nanotubes and Junctions

Metallic and semiconducting Single Wall Carbon Nanotubes (CNT) have recently been characterized using scanning tunneling microscopy (STM) and the manipulation of individual CNT has been demonstrated. These developments make the prospect of using CNT as molecular wires and possibly as electronic devices an even more interesting one. We have been modeling various electronic properties such as the density of states and the transmission coefficient of CNT wires and junctions. These studies involve first calculating the stability of junctions using molecular dynamics simulations and then calculating the electronic properties using a pi-electron tight binding Hamiltonian. We have developed the expertise to calculate the electronic properties of both finite-sized CNT and CNT systems with semi-infinite boundary conditions. In this poster, we will present an overview of some of our results. The electronic application of CNT that is most promising at this time is their use as molecular wires. The conductance can however be greatly reduced because of reflection due to defects and contacts. We have modeled the transmission through CNT in the presence of two types of defects: weak uniform disorder and strong isolated scatterers. We find that the conductance is affected in significantly different manners due to these defects Junctions of CNT have also been imaged using STM. This makes it essential to derive rules for the formation of junctions between tubes of different chirality, study their relative energies and electronic properties. We have generalized the rules for connecting two different CNT and have calculated the transmission and density of states through CNT junctions. Metallic and semiconducting CNT can be joined to form a stable junction and their current versus voltage characteristics are asymmetric. CNT are deformed by the application of external forces including interactions with a substrate or other CNT. In many experiments, these deformation are expected to occur naturally. We will present some preliminary results of our calculations of the modification of CNT electronic properties as a result of deformations.

Anantram, M. P.↗
DOE OSTI2023

The Roadrunner Trap: A QSCOUT Device

The Roadrunner ion trap is a micro-fabricated surface-electrode ion trap based on silicon technology. This trap has one long linear section and a junction to allow for chain storage and reconfiguration. It uses a symmetric rf-rail design with segmented inner and outer control electrodes and independent control in the junction arms. The trap is fabricated on Sandia’s High Optical Access (HOA) platform to provide good optical access for tightly focused laser beams skimming the trap surface. It is packaged on our custom Bowtie-102 ceramic pin or land grid array packages using a 2.54 mm pitch for backside pins or pads. This trap also includes an rf sensing capacitive divider and tungsten wires for heating or temperature monitoring. The Roadrunner builds on the knowledge gained from previous surface traps fabricated at Sandia while improving ion control capabilities.

42 ENGINEERING↗
NASA NTRS2004

The Space Technology 5 Avionics System

The Space Technology 5 (ST5) mission is a NASA New Millennium Program project that will validate new technologies for future space science missions and demonstrate the feasibility of building launching and operating multiple, miniature spacecraft that can collect research-quality in-situ science measurements. The three satellites in the ST5 constellation will be launched into a sun-synchronous Earth orbit in early 2006. ST5 fits into the 25-kilogram and 24-watt class of very small but fully capable spacecraft. The new technologies and design concepts for a compact power and command and data handling (C&DH) avionics system are presented. The 2-card ST5 avionics design incorporates new technology components while being tightly constrained in mass, power and volume. In order to hold down the mass and volume, and quali& new technologies for fUture use in space, high efficiency triple-junction solar cells and a lithium-ion battery were baselined into the power system design. The flight computer is co-located with the power system electronics in an integral spacecraft structural enclosure called the card cage assembly. The flight computer has a full set of uplink, downlink and solid-state recording capabilities, and it implements a new CMOS Ultra-Low Power Radiation Tolerant logic technology. There were a number of challenges imposed by the ST5 mission. Specifically, designing a micro-sat class spacecraft demanded that minimizing mass, volume and power dissipation would drive the overall design. The result is a very streamlined approach, while striving to maintain a high level of capability, The mission's radiation requirements, along with the low voltage DC power distribution, limited the selection of analog parts that can operate within these constraints. The challenge of qualifying new technology components for the space environment within a short development schedule was another hurdle. The mission requirements also demanded magnetic cleanliness in order to reduce the effect of stray (spacecraft-generated) magnetic fields on the science-grade magnetometer.

Speer, Dave↗
DOE OSTI2023

Superconducting Hyperdimensional Associative Memory Circuit for Scalable Machine Learning

Here we propose a generalized architecture for the first rapid-single-flux-quantum (RSFQ) associative memory circuit. The circuit employs hyperdimensional computing (HDC), a machine learning (ML) paradigm utilizing vectors with dimensionality in the thousands to represent information. HDC designs have small memory footprints, simple computations, and simple training algorithms compared to superconducting neural network accelerators (SNNAs), making them a better option for scalable SFQ machine learning (ML) solutions. The proposed superconducting HDC (SHDC) circuit uses entirely on-chip RSFQ memory which is tightly integrated with logic, operates at 33.3 GHz, is applicable to general ML tasks, and is manufacturable at practically useful scales given current SFQ fabrication limits. Tailored to a language recognition task, SHDC consists of ~ 2-20 M Josephson junctions (JJs) and consumes up to three times less power than an analogous CMOS HDC circuit while achieving 78-84% higher throughput. SHDC is capable of outperforming the state of the art RSFQ SNNA, SuperNPU, by 48-99% for all benchmark NN architectures tested while occupying up to 90% less area and consuming up to nine times less power. To the best of the authors' knowledge, SHDC is currently the only superconducting ML approach feasible at practically useful scales for real-world ML tasks and capable of online learning.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

First-Principles Quantum Transport Modeling of Spin-Transfer and Spin-Orbit Torques in Magnetic Multilayers

A unified approach for computing (i) spin-transfer torque in magnetic trilayers like spin valve and magnetic tunnel junction, where injected charge current flows perpendicularly to interfaces, and (ii) spin-orbit torque in magnetic bilayers of the type ferromagnet/spin-orbit-coupled material, where injected charge current flows parallel to the interface, was reviewed. The experimentally explored and technologically relevant spin-orbit-coupled materials include 5d heavy metals, topological insulators, Weyl semimetals, and transition metal dichalcogenides. This approach requires to construct the torque operator for a given Hamiltonian of the device and the steady-state nonequilibrium density matrix, where the latter is expressed in terms of the nonequilibrium Green’s functions and split into three contributions. Tracing these contributions with the torque operator automatically yields field-like and damping-like components of spin-transfer torque or spin-orbit torque vector, which is particularly advantageous for spin-orbit torque where the direction of these components depends on the unknown-in-advance orientation of the current-driven nonequilibrium spin density in the presence of spin-orbit coupling. Illustrative examples are provided by computing spin-transfer torque in a one-dimensional toy model of a magnetic tunnel junction and realistic Co/Cu/Co spin valve, both of which are described by first-principles Hamiltonians obtained from noncollinear density functional theory calculations, as well as by computing spin-orbit torque in a ferromagnetic layer described by a tight-binding Hamiltonian which includes spin-orbit proximity effect within ferromagnetic monolayers assumed to be generated by the adjacent monolayer transition metal dichalcogenide. In addition, it is shown here how spin-orbit proximity effect, quantified by computing (via first-principles retarded Green’s function) spectral functions and spin textures on monolayers of realistic ferromagnetic material like Co in contact with heavy metal or monolayer transition metal dichalcogenide, can be tailored to enhance the magnitude of spin-orbit torque. Furthermore, errors made in the calculation of spin-transfer torque are quantified when using Hamiltonian from collinear density functional theory, with rigidly rotated magnetic moments to create noncollinear magnetization configurations, instead of proper (but computationally more expensive) self-consistent Hamiltonian obtained from noncollinear density functional theory.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Modeling Surface-Enhanced Raman Scattering of Au-Pyrazine and Au-Pyrazine-Au Nanorod Dimer Systems with the TD-DFTB Method

This study investigates Raman scattering from a pyrazine molecule adsorbed on gold nanorod surfaces using the time-dependent density functional tight-binding (TD-DFTB) method. We analyze surface enhanced Raman scattering (SERS) of the molecule for two configurations: one where the molecule is adsorbed on a single gold nanorod forming Au-pyrazine complex, and another where it forms a nano-junction Au-pyrazine-Au dimer system. These two configurations offer distinct chemical environments for the molecule and different local field enhancements, with the dimer systems generating enhanced hotspot regions at the junctions. We present results for nanojunction, Au-pyrazine-Au dimer structures, for variable nanogap sizes that lead to shift in the plasmon energy. The study identifies contributions to the SERS enhancements from chemical, electromagnetic, and resonance charge transfer mechanisms. Our results show that the chemical mechanism provides enhancement factors in the range of 10 2 –10 3 , while the electromagnetic enhancements are on the order of 10 3 –10 5 for monomer systems and 10 6 –10 8 for dimer structures. We present results for a nanorod with a length of 5.3 nm and a width of 0.52 nm, consisting of 121 gold atoms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

A computational approach to complex junctions and interfaces

Molecular- and nano- junctions, surfaces, interfaces, and interfacial processes have been the subjects of this DOE supported program for about 20 years. We have investigated electronic and magnetic structure, spin-dependent charge transport, and emerging phenomena at surfaces and interfaces in a number of physical systems ranging from nano-clusters, to nanowires, to two-dimensional (2D) crystals and their interactions, to bulk matter. Eighty-four refereed papers were published [1-84], with a majority effort from the group led by the PI, and over a hundred presentations were made at international conferences. We use first-principles methods in the framework of density functional theory in conjunction with nano-equilibrium Green function techniques, semi-empirical Boltzmann transport theory, tight-binding models, and the Hubbard model and many-body wavefunction approaches. In pursuing our scientific goals, we have also developed a number of computational algorithms and computational packages.

2D materials↗
DOE OSTI2025

Competing conduction mechanisms in high performance carbon nanotube fibers

The performance of carbon nanotube (CNT) cables, a contender for copper-wire replacement, is tied to its metallic and semi-conducting-like conductivity responses with temperature; the origin of the semi-conducting-like response however is an underappreciated incongruity in literature. With controlled aspect-ratio and doping-degree, over 61 unique cryogenic experiments including anisotropy and Hall measurements, CNT cable performance is explored at extreme temperatures (65 mK) and magnetic-fields (60 T). A semi-conducting-like conductivity response with temperature becomes temperature-independent approaching absolute-zero, uniquely demonstrating for the first time the necessity of heterogeneous fluctuation induced tunneling; complete de-doping leads to localized hopping, contrasting graphite's pure metallic-like response. High-field magneto-resistance (including novel +22 % longitudinal magneto-resistance near room-temperature) is analyzed with hopping and classical two-band models, both yielding a similar parameter useful for conductor development. Varying field-orientation angle uncovers significant two- and four-fold symmetries that are shown to be from Aharonov-Bohm-like corrections to the curvature-induced bandgap, a first for macroscale CNT fibers. Tight-binding calculations using Green's Function formalism model the largest, coherent transport to-date in commensurate CNT bundles in magnetic-field, revealing non-uniform transmission across bundle cross-sections with doping restoring uniformity; independent of doping, transport in bundle-junction-bundle systems are predominantly from CNTs adjacent to the other bundle—demonstrating that smaller bundles are more efficient for electronic transport. The final impact is predicting the ultimate conductivity of heterogeneous CNT cables using temperature and field-dependent transport, surpassing conductivity of traditional metals.

36 MATERIALS SCIENCE↗
NASA NTRS1995

Mechanotransduction and the functional response of bone to mechanical strain

Mechanotransduction plays a crucial role in the physiology of many tissues including bone. Mechanical loading can inhibit bone resorption and increase bone formation in vivo. In bone, the process of mechanotransduction can be divided into four distinct steps: (1) mechanocoupling, (2) biochemical coupling, (3) transmission of signal, and (4) effector cell response. In mechanocoupling, mechanical loads in vivo cause deformations in bone that stretch bone cells within and lining the bone matrix and create fluid movement within the canaliculae of bone. Dynamic loading, which is associated with extracellular fluid flow and the creation of streaming potentials within bone, is most effective for stimulating new bone formation in vivo. Bone cells in vitro are stimulated to produce second messengers when exposed to fluid flow or mechanical stretch. In biochemical coupling, the possible mechanisms for the coupling of cell-level mechanical signals into intracellular biochemical signals include force transduction through the integrin-cytoskeleton-nuclear matrix structure, stretch-activated cation channels within the cell membrane, G protein-dependent pathways, and linkage between the cytoskeleton and the phospholipase C or phospholipase A pathways. The tight interaction of each of these pathways would suggest that the entire cell is a mechanosensor and there are many different pathways available for the transduction of a mechanical signal. In the transmission of signal, osteoblasts, osteocytes, and bone lining cells may act as sensors of mechanical signals and may communicate the signal through cell processes connected by gap junctions. These cells also produce paracrine factors that may signal osteoprogenitors to differentiate into osteoblasts and attach to the bone surface. Insulin-like growth factors and prostaglandins are possible candidates for intermediaries in signal transduction. In the effector cell response, the effects of mechanical loading are dependent upon the magnitude, duration, and rate of the applied load. Longer duration, lower amplitude loading has the same effect on bone formation as loads with short duration and high amplitude. Loading must be cyclic to stimulate new bone formation. Aging greatly reduces the osteogenic effects of mechanical loading in vivo. Also, some hormones may interact with local mechanical signals to change the sensitivity of the sensor or effector cells to mechanical load.

Non-NASA Center↗