Search NASA⌕ Search

SEARCH · Search NASA

Results for “topographic”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS2022

High-Resolution Imaging of Supraglacial Hydrological Features on the Greenland Ice Sheet with NASA’s Airborne Topographic Mapper (ATM) Instrument Suite

Seasonal meltwater pools on the surface of the Greenland Ice Sheet (GrIS) during late spring and summer in lakes on the surface and transforms the ice sheet's surface into a wet environment in the ablation zone below the equilibrium line. These supraglacial lakes in topographic lows on the ice surface are connected by a dendritic pattern of meandering streams and channels that together form a hydrological system consisting of supra-, en-, and subglacial components. Here, we use lidar data from NASA's Airborne Topographic Mapper (ATM) instrument suite and high-resolution optical imagery collected as part of Operation IceBridge (OIB) in spring 2019 over the GrIS to develop methods for the study of supraglacial hydrological features. While airborne surveys have a limited temporal and spatial coverage compared to imaging spaceborne sensors, their high footprint density and high-resolution imagery reveal a level of detail that is currently not obtainable from spaceborne measurements. The accuracy and resolution of airborne measurements complement spaceborne measurements, can support calibration and validation of spaceborne methods, and provide information necessary for high-resolution process studies of the supraglacial hydrological system on the GrIS that currently cannot be achieved from spaceborne observations alone.

ATM↗
NASA NTRS1972

Topographic mapping of the Apollo 16 landing site

The techniques are described for obtaining high resolution photographs from the Apollo 14 lunar orbiter for topographic mapping of the Descartes landing site for use in planning Apollo 16. The Apollo 16 spacecraft landed approximately 250 m from the selected target point, and few topographic surprises were encountered.

Hill, R. O.↗
NASA NTRS1974

Data processing of Martian topographic information obtained from ground-based radar and spectroscopy and from Mariners 6 and 7. Martian topography elevations: Data processing

Papers are presented which were published as a result of a project involving the preparation of a topographical elevation contour map of Mars from all data sources available through 1969, as well as the observation of Mars by spectroscopic methods in 1971 to provide additional pressure data for topographic information. Topics of the papers include: the analysis of large-scale Martian topography variations - data preparation from earth based radar, earth based CO2 spectroscopy, and Mariners 6 and 7 CO2 spectroscopy; the analysis of water content in observed Martian white clouds; and Martian, lunar, and terrestrial crusts - a three-dimensional exercise in comparative geophysics.

Anderson, K. A.↗
NASA NTRS1976

X-ray topographic observations of magnetic domains in Czochralski-grown nickel single crystals in anomalous transmission geometry

The anomalous transmission effect has been observed in nickel single crystals grown by the Czochralski technique. Sample crystals prepared for X-ray topography are 1.5 to 2.5 cm in diameter and thicker than 0.4 mm; the product of the ordinary linear absorption coefficient and thickness ranges from 17 to 45 for Cu K-alpha radiation. Topographs taken with an asymmetric-crystal-topographic (ACT) camera have revealed extremely straight line images and rectangular arrangements of short line-segment images, along with the images of crystal imperfections. The line images change their arrangement upon application of magnetic fields. These images are attributed to magnetic domains in the interior of crystals. The formation of domain walls near the crystal surface is also observed and distinguished clearly from magnetic domains in the bulk with the use of the ACT camera.

Kuriyama, M.↗
NASA NTRS1977

Investigation of the topographical features of surface carrier concentrations in silicon solar cell material using electrolyte electroreflectance

Topographical variations in carrier concentration delta N/N across the surface of n(+) on p diffused silicon solar cell material are studied by utilizing electrolyte electroreflectance with a spatial resolution of 100 microns within approximately 500 A of the surface. The topographical variations of delta N/N approximately 10 - 20% are found to be comparable to Czochralski grown material. The electroreflectance method can also be utilized to investigate other semiconductors such as GaAs.

Pollay, F. H.↗
NASA NTRS1978

Mars synthetic topographic mapping

Topographic contour maps of Mars are compiled by synthesizing data acquired from various scientific experiments of the Mariner 9 mission, including S-band radio occultation, the UV spectrometer, the IR radiometer, the IR interferometer spectrometer, and television imagery, as well as earth-based radar information. The entire planet is mapped at scales of 1:25,000,000 and 1:5,000,000 using Mercator, Lambert, and polar stereographic map projections. For the computation of map projections, a biaxial spheroid figure is adopted. The semimajor and semiminor axes are 3393.4 and 3375.7 km, respectively, with a polar flattening of 0.0052. For the computation of elevations, a topographic datum is defined by a gravity field described in terms of spherical harmonics of fourth order and fourth degree combined with a 6.1-mbar occultation pressure surface. This areoid can be approximated by a triaxial ellipsoid with semimajor axes of A = 3394.6 km and B = 3393.3 km and a semiminor axis of C = 3376.3 km. The semimajor axis A intersects the Martian surface at longitude 105 deg W. The dynamic flattening of Mars is 0.00525. The contour interval of the maps is 1 km. For some prominent features where overlapping pictures from Mariner 9 are available, local contour maps at relatively larger scales were also compiled by photogrammetric methods on stereo plotters.

Wu, S. S. C.↗
NASA NTRS1979

Evaluation and modeling of the topographic effect on the spectral response from NADIR pointing sensors

A field experiment, using a hand-held radiometer, was designed and conducted to assess a simple theoretical incidence model for simulating the topographic effect of a uniform sand surface. Seven data sets were taken to compare effects of solar elevation and azimuth encountered at different times of year. Analysis of these data showed considerable variation in radiance values for different slope angles and aspects and that these values varied considerably with changes in solar elevation and azimuth. The field measured variations in spectral response were found to have generally strong correlations with the theoretical model. The reason for the occurrence of lower correlations are given and methods for improving the model are suggested. A model to simulate LANDSAT sensor response was applied to two subsets of the field data to establish the magnitude of the topographic effect on satellite data.

Holben, B. N.↗
NASA NTRS1978

Improving forest cover classification accuracy from Landsat by incorporating topographic information

The paper shows that accuracies of computer classification of species-specific forest cover types from Landsat imagery can be improved by 27% or more through the incorporation of topographic information from digital terrain tapes registered to multidate Landsat imagery. The topographic information improves classification accuracies because many common forest tree species have preferred elevation ranges and slope aspects. These preferences allow the separation of forest cover types which have similar spectral signatures but different species compositions. It is noted that the development of a classification system which uses prior probabilities and sets of prior probabilities conditioned by one or two external variables represents a significant increase in classification power.

Strahler, A. H.↗
NASA NTRS1982

Effect of differential spectral reflectance on DIAL measurements using topographic targets

Differential absorption lidar (DIAL) measurements of atmospheric gases and temperature made using topographic targets to provide the backscattered signal are subject to errors from the differential spectral reflectance of the target materials. The magnitude of this effect is estimated for a number of DIAL measurements reported in the literature. Calculations are presented for several topographic targets. In general the effect on a DIAL measurement increases directly with increasing wavelength and laser line separation, and inversely with differential absorption coefficient and distance to the target. The effect can be minimized by using tunable or isotope lasers to reduce the laser line separation or by using additional reference wavelengths to determine the surface differential spectral reflectance.

Grant, W. B.↗
NASA NTRS1983

Techniques for the correction of topographical effects in scanning Auger electron microscopy

A number of ratioing methods for correcting Auger images and linescans for topographical contrast are tested using anisotropically etched silicon substrates covered with Au or Ag. Thirteen well-defined angles of incidence are present on each polyhedron produced on the Si by this etching. If N1 electrons are counted at the energy of an Auger peak and N2 are counted in the background above the peak, then N1, N1 - N2, (N1 - N2)/(N1 + N2) are measured and compared as methods of eliminating topographical contrast. The latter method gives the best compensation but can be further improved by using a measurement of the sample absorption current. Various other improvements are discussed.

Prutton, M.↗
NASA NTRS1983

Laboratory simulation of tunable diode laser remote measurement of atmospheric gases using topographic targets

In order to test the possibility that tunable diode laser (TDL) systems using topographic targets can be applied to the measurement of a variety of gases at concentrations and distances characteristic of industrial gas leaks, a single-ended TDL system was assembled for use with selected topographic targets to detect NO2 at atmospheric pressure and NO2 and NH3 at low pressures. In both cases, the intensity distribution of radiation backscattered from selected targets was found to be heavily weighted to a specular rather than a Lambertian distribution. A sensitivity of 5 ppm-m has been demonstrated for the case of NO2.

Webster, C. R.↗
NASA NTRS1984

Mercury: Topographic and geologic data from Earth-based radar observations

Significant new geologic information has been revealed by comparing 1:5 million scale geologic maps of the equatorial zone quadrangles of Mercury (H-6, H-7 and H-8) to Earth-based elevation profiles and surface reflectivity maps of Mercury obtained in the early 1970's at the Arecibo (PR) and Goldstone (CA) radar facilities. These data consist of 23 Goldstone images and profiles of polarized return data at 12.5-cm wavelength and one Arecibo profile. Radar data with 150-m vertical accuracy and 10- to 20-km horizontal resolution are available for areas between latitudes 13 N. and 11 S. In general, these data sets show excellent correlation between: (1) relative elevation and roughness differences that are reflected by mapped geologic contacts; (2) mapped ridges and scarps that display distinctive radar signatures; and (3) position and morphology of crater-and-basin topographic elements. Inferences can also be drawn about topographic and geologic terrain beyond the area imaged by Mariner 10 cameras.

Strobell, M. E.↗
NASA NTRS1984

SIR-B cartography and stereo topographic mapping

The SIR-B mapping experiment which will evaluate the utility of SAR images taken singularly, in pairs, and in combination with other data sets for cartographic, topographic, and thematic mapping, and determine the optimum configuration of a SAR system for future mapping mission is outlined. SIR-B is the first orbital imaging radar mission which will incorporate maintenance of geometric image fidelity along with careful calibration and documentation of internal timing and frequency parameters. This along and and the multiple incidence angle images of the same target which are necessary for stereoscopy and topographic mapping, make it the ideal opportunity for cartographic experimentation. It is emphasized that comprises a significant part of the overall experiment objectives.

Kobrick, M.↗
NASA NTRS1985

Topographic mapping of the moon

Contour maps of the moon have been compiled by photogrammetric methods that use stereoscopic combinations of all available metric photographs from the Apollo 15, 16, and 17 missions. The maps utilize the same format as the existing NASA shaded-relief Lunar Planning Charts (LOC-1, -2, -3, and -4), which have a scale of 1:2,750,000. The map contour interval is 500 m. A control net derived from Apollo photographs by Doyle and others was used for the compilation. Contour lines and elevations are referred to the new topographic datum of the moon, which is defined in terms of spherical harmonics from the lunar gravity field. Compilation of all four LOC charts was completed on analytical plotters from 566 stereo models of Apollo metric photographs that cover approximately 20 percent of the moon. This is the first step toward compiling a global topographic map of the moon at a scale of 1:5,000,000.

Wu, S. S. C.↗
NASA NTRS1985

Topographic mapping from interferometric synthetic aperture radar observations

The production of high-resolution topographic maps derived from interferometric synthetic aperture radar observations of the Earth is reported. Topographic maps are typically determined from stereo-pair optical photographs. Vertical relief causes the same terrain to appear in a slightly different projection for differing look angles, and this shift in appearance is interpreted in terms of the height of the terrain. The radar interferometric approach is related to the stereo technique in that the terrain is viewed at two different angles; however, in this case, the angular separation of the antennas is extremely small, on the order of a milliradian or less, as compared to tens of degrees for the optical case. Thus, the geometrical distortion and subsequent rectification correction algorithms are much less severe in the reduction of interferometric data.

Zebker, H. A.↗
NASA NTRS1985

Topographic mapping from interferometric synthetic aperture radar observations

Interferometric SAR observations are a basis for the generation of high resolution topographic maps of a region through the interpretation of interference fringes. The combination of height, along-track, and slant range measurements is sufficient for rectification of the radar imagery for cartographic applications, in addition to furnishing an accurate determination of the scene topography. Topographic maps have been derived on the basis of data recorded by both aircraft and Seasat-A satellite radars. A comparison of the maps obtained with U.S. Geological Survey Contour maps indicates a high degree of correlation between two sets of altitude data.

Zebker, H. A.↗
NASA NTRS1986

Topographic mapping from interferometric synthetic aperture radar observations

The production of high-resolution topographic maps derived from interferometric synthetic aperture radar observations of the earth is reported. Topographic maps are typically determined from stereo-pair optical photographs. Vertical relief causes the same terrain to appear in a slightly different projection for differing look angles, and this shift in appearance is interpreted in terms of the height of the terrain. The radar interferometric approach is related to the stereo technique in that the terrain is viewed at two different angles; however, in this case, the angular separation of the antennas is extremely small, on the order of a milliradian or less, as compared to tens of degrees for the optical case. Thus, the geometrical distortion and subsequent rectification correction algorithms are much less severe in the reduction of interferometric data.

Zebker, H. A.↗
NASA NTRS1986

Topographic effect on tilt, strain, and displacement measurements

An approximate analytical method is used to give simple expressions for the effect of arbitrarily shaped topography on vertical, horizontal and surface tilt measurements. Corrections to tilt fields are found to be directly proportional to the local slope of the topography. Comparison is made between expressions for tilt and those for strain and displacement. Although the topographic effects on secular tilt, strain, and vertical displacement are not yet measurable, the topographic effect on precision tidal tilt and strain measurements can be significant.

Meertens, Charles M.↗