Search NASA⌕ Search

SEARCH · Search NASA

Results for “transfer entropy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

A phase-field method for boiling heat transfer

Here we present a phase field method for heat transfer in two-phase flow with boiling. The vapor/liquid interface evolution is modeled by the Cahn-Hilliard equation. The phase change rate is determined by accounting for the heat conduction balance on either vapor or liquid side of the interfacial area, depending on which side the temperature is assumed to be maintained at the saturation temperature during boiling. The velocity correction scheme proposed by Dong & Shen [27] is extended to solve the Navier-Stokes equations for a non-solenoidal velocity field, and the entropy viscosity method is employed for stabilization. The phase change model is verified by two-dimensional simulations of a vapor bubble growing in super-heated liquid and in film boiling. In both cases, mesh independence of the results is systematically performed. Subsequently, the method is applied to predict the growth of three-dimensional vapor bubble in a rectangular microchannel with boiling flow, achieving good agreement with experimental measurements and available simulation results using the level-set method. The numerical experiments demonstrate that the required mesh resolution for the phase field method is comparable with that of volume of fluid (VoF) and level-set methods.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Isopotential Electron Titration of Ammonia Charge Transfer on Metal Catalysts

Electron transfer between adsorbates and surfaces determines the binding strength and reactivity of chemical moieties on materials designed for separations and catalysis. To quantify electron exchange, the extent of charge transfer resulting from ammonia adsorption on a Ru surface was measured by isopotential electron titration (IET) on a Ru catalytic condenser, where isopotential conditions were maintained between Ru and silicon separated by an insulating HfO 2 layer during gas phase ammonia adsorption. Charge transfer upon ammonia adsorption on a Ru catalytic condenser increased from 40 to 1200 nC/cm 2 at 75 and 225 °C, respectively. Charge transfer measurements provided a direct estimate of ammonia adsorption thermodynamics on Ru without knowing surface coverages a priori, revealing an adsorption enthalpy of −53 ± 10 kJ/mol and entropy of −61 ± 26 J/mol·K. Combining experimentally-measured charge transfer with kinetic Monte Carlo simulations informed adsorbate surface coverages determined that 0.058 electrons were transferred to the Ru surface for each molecular ammonia adsorption event (δ NH 3 = 0.058 ± 0.005 e – /NH 3 *), consistent with calculated Bader charges. The ability to measure the extent of charge transfer for adsorbed species provides a fundamental descriptor to understand existing and new chemically functional surfaces, providing a foundational method for the emerging field of thermochemical surface coulometry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Helical Fins for Concentrated Solar Receivers: Design Optimization and Entropy Analysis

Concentrated solar power (CSP) with thermal energy storage (TES) has the potential to achieve grid parity. This can be realized by operating CSP systems at temperatures above 700 °C with high-efficiency sCO 2 power cycles. However, operating CSP systems at such temperatures poses several challenges, among which the design of solar receivers to accommodate increased thermal loads is critical. To this end, this work explores and optimizes various swirl-inducing internal fin designs for solar receiver tubes. These fin designs not only improve the thermal performance of receiver tubes but also levelize temperature unevenness caused by non-uniform thermal loading. In this work, the geometric parameters of the fin designs are optimized to maximize the Nusselt number with a constraint on the friction factor. This optimization, however, is computationally intensive, requiring hundreds of simulation calls to computational fluid dynamics (CFD) models. Here, to circumvent this problem, surrogate models are used to approximate the simulation outputs needed during the optimization. In addition, this study also examines the fin designs from an entropy generation perspective. To this end, the entropy contributions from thermal and viscous effects are quantitatively compared while varying the operational Reynolds number.

14 SOLAR ENERGY↗
DOE OSTI2023

Refractory high entropy alloy compact heat exchanger

Several innovative technologies, including pressure-drop minimization, advanced refractory high entropy alloys, and advanced manufacturing can provide a compact heat exchanger that extends the state-of-the-art heat-exchanger operating range. The compact heat exchanger can reduce pressure drop losses by 100 to 500%, while retaining most of the heat transfer. The compact heat exchanger can be fabricated from refractory high entropy alloys that have favorable corrosion, thermal fatigue, and creep properties at high temperatures and pressures. Therefore, the compact heat exchanger using high entropy alloys can operate at >800° C. and 80 bars.

Kustas, Andrew↗
DOE OSTI2024

Phase-space entropy cascade and irreversibility of stochastic heating in nearly collisionless plasma turbulence

We consider a nearly collisionless plasma consisting of a species of “test particles” in one spatial and one velocity dimension, stirred by an externally imposed stochastic electric field—a kinetic analog of the Kraichnan model of passive advection. The mean effect on the particle distribution function is turbulent diffusion in velocity space—known as stochastic heating. Accompanying this heating is the generation of fine-scale structure in the distribution function, which we characterize with the collisionless (Casimir) invariant C 2 ∝ ∫ ∫ d x d v 〈 f 2 〉 —a quantity that here plays the role of (negative) entropy of the distribution function. We find that C 2 is transferred from large scales to small scales in both position and velocity space via a phase-space cascade enabled by both particle streaming and nonlinear interactions between particles and the stochastic electric field. We compute the steady-state fluxes and spectrum of C 2 in Fourier space, with k and s denoting spatial and velocity wave numbers, respectively. In our model, the nonlinearity in the evolution equation for the spectrum turns into a fractional Laplacian operator in k space, leading to anomalous diffusion. Whereas even the linear phase mixing alone would lead to a constant flux of C 2 to high s (towards the collisional dissipation range) at every k , the nonlinearity accelerates this cascade by intertwining velocity and position space so that the flux of C 2 is to both high k and high s simultaneously. Integrating over velocity (spatial) wave numbers, the k -space ( s -space) flux of C 2 is constant down to a dissipation length (velocity) scale that tends to zero as the collision frequency does, even though the rate of collisional dissipation remains finite. The resulting spectrum in the inertial range is a self-similar function in the ( k , s ) plane, with power-law asymptotics at large k and s . Our model is fully analytically solvable, but the asymptotic scalings of the spectrum can also be found via a simple phenomenological theory whose key assumption is that the cascade is governed by a “critical balance” in phase space between the linear and nonlinear timescales. We argue that stochastic heating is made irreversible by this entropy cascade and that, while collisional dissipation accessed via phase mixing occurs only at small spatial scales rather than at every scale as it would in a linear system, the cascade makes phase mixing even more effective overall in the nonlinear regime than in the linear one. Published by the American Physical Society 2024

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Temperature and Solvent Effects on H 2 Splitting and Hydricity: Ramifications on CO 2 Hydrogenation by a Rhenium Pincer Catalyst

The catalytic hydrogenation of carbon dioxide holds immense promise for applications in sustainable fuel synthesis and hydrogen storage. Mechanistic studies that connect thermodynamic parameters with the kinetics of catalysis can provide new understanding and guide predictive design of improved catalysts. Reported here are thermochemical and kinetic analyses of a new pincer-ligated rhenium complex ( tBu POCOP)Re(CO) 2 ( tBu POCOP = 2,6-bis(di-tert-butylphosphinito)phenyl) that catalyzes CO 2 hydrogenation to formate with faster rates at lower temperature. Because the catalyst follows the prototypical “outer sphere” hydrogenation mechanism, comprehensive studies of temperature and solvent effects on the H 2 splitting and hydride transfer steps are expected to be relevant to many other catalysts. Strikingly large entropy associated with cleavage of H2 results in a strong temperature dependence on the concentration of [( tBu POCOP)Re(CO) 2 H] – present during catalysis, which is further impacted by changing the solvent from toluene to tetrahydrofuran to acetonitrile. New methods for determining the hydricity of metal hydrides and formate at temperatures other than 298 K were developed, providing insight into how temperature can influence the favorability of hydride transfer during catalysis. These thermochemical insights guided the selection of conditions for CO 2 hydrogenation to formate with high activity (up to 364 h –1 at 1 atm or 3330 h –1 at 20 atm of 1:1 H 2 CO 2 ). In cases where hydride transfer is the highest individual kinetic barrier, entropic contributions to outer sphere H 2 splitting lead to a unique temperature dependence: catalytic activity increases as temperature decreases in tetrahydrofuran (200-fold increase upon cooling from 50 to 0 °C) and toluene (4-fold increase upon cooling from 100 to 50 °C). Furthermore, the ramifications on catalyst structure-function relationships are discussed, including comparisons between “outer sphere” mechanisms and metal–ligand cooperation mechanisms.

14 SOLAR ENERGY↗
DOE OSTI2025

Entropy is an important design principle in the photosystem II supercomplex

Photosystem II (PSII) can achieve near-unity quantum efficiency of light harvesting in ideal conditions and can dissipate excess light energy as heat to prevent the formation of reactive oxygen species (ROS) under light stress. Understanding how this pigment–protein complex accomplishes these opposing goals is a topic of great interest that has so far been explored primarily through the lens of the system energetics. Despite PSII’s known flat energy landscape, a thorough consideration of the entropic effects on energy transfer in PSII is lacking. In this work, we aim to discern the free energetic design principles underlying the PSII energy transfer network. To accomplish this goal, we employ a structure-based rate matrix and compute the free energy terms in time following a specific initial excitation to discern how entropy and enthalpy drive ensemble system dynamics. We find that the interplay between the entropy and enthalpy components differ among each protein subunit, which allows each subunit to fulfill a unique role in the energy transfer network. This individuality ensures that PSII can accomplish efficient energy trapping in the reaction center (RC), effective nonphotochemical quenching (NPQ) in the periphery, and robust energy trapping in the other-monomer RC if the same-monomer RC is closed. We also show that entropy, in particular, is a dynamically tunable feature of the PSII free energy landscape accomplished through regulation of LHCII binding. These findings help rationalize natural photosynthesis and provide design principles for more efficient solar energy harvesting technologies.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Fluid dynamic and thermal performance of a slotted cylinder at low Reynolds number

The fluid dynamic and thermal performance of a circular cylinder with a slot parallel to the flow is numerically investigated. The study utilized the semi-implicit finite volume multi-material algorithm MPM-ICE, a component of the Uintah framework. The normalized slot width s/D ranges from 0.1 - 0.3, introducing an additional heat transfer surface area between ~ 10 and ~ 50%, and a mass reduction between ~ 13 and ~ 38% in the cylinder. We assumed two-dimensional incompressible flow and simulated a Reynolds number Re D between 100 and 1000. The slotted cylinders are found to have a total drag force reduction up to ~ 45%, compared to a solid cylinder despite the additional viscous drag force in the slot. Convection heat transfer is enhanced up to ~ 70%. Further, the slotted cylinder performance index, defined as the ratio of the heat rate to the drag force, increases up to maximum of ~ 3, indicating better overall thermal fluid performance. An entropy analysis showed the best performance index occurs at the highest Re D . Correlations for drag coefficient and Nusselt number are proposed along with an entropy optimization method.

42 ENGINEERING↗
DOE OSTI2021

Stochastic thermodynamic cycles of a mesoscopic thermoelectric engine

Here, we analyze a steady-state thermoelectric engine, whose working substance consists of two capacitively coupled quantum dots. One dot is tunnel-coupled to a hot reservoir serving as a heat source, the other one to two electrically biased reservoirs at a colder temperature, such that work is extracted under the form of a steady-state current against the bias. In single realizations of the dynamics of this steady-state engine autonomous, four-stroke cycles can be identified. The cycles are purely stochastic, in contrast to mechanical autonomous engines which exhibit self-oscillations. In particular, these cycles fluctuate in direction and duration and occur in competition with other spurious cycles. Using a stochastic thermodynamic approach, we quantify the cycle fluctuations and relate them to the entropy produced during individual cycles. We identify the cycle mainly responsible for the engine performance and quantify its statistics with tools from graph theory. We show that such stochastic cycles are made possible because the work extraction mechanism is itself stochastic instead of the periodic time dependence in the working-substance Hamiltonian which can be found in conventional mechanical engines. Our investigation brings new perspectives about the connection between cyclic and steady-state engines.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Analysis of direct and indirect noise in a next-generation aviation gas turbine combustor

A large-eddy simulation (LES) of a next-generation combustor is performed to examine effects of this combustor concepts on direct and indirect combustion noise characteristics. Direct noise is computed considering the unsteady heat release predictions while entropy fluctuations in the downstream part of the combustor are used to estimate indirect noise through the transfer function of the outlet nozzle. A low-order acoustic reconstruction technique, which utilizes the Green’s function of the configuration, is developed to compute the acoustics inside the combustor. Comparisons to experimental results are reported, showing the reasonable accuracy of the LES and combustion noise computations. The direct noise spectrum peaks at frequencies around 3 kHz because of the fast timescales associated with the chemical reactions inside the combustor. In addition, the indirect noise is dominant at low frequencies, i.e., less than 400 Hz, because of the characteristics of the entropy spectrum at the outlet nozzle. Further, compared to a conventional rich-quench-lean (RQL) combustor configuration, significant differences in the acoustics are observed, and are explained by two specific technological novelties. Firstly, the direct noise spectrum peaks at significantly higher frequencies due to the combustor’s compactness. Secondly, the entropy inhomogeneties downstream of the combustion region are an order of magnitude smaller in amplitude due to the lack of dilution with cold air. This leads to a significant reduction in the indirect noise amplitude at low frequencies, where it is the dominant source of noise. These results suggest opportunities for advanced combustion technologies to achieve substantial reductions in combustion-related noise.

42 ENGINEERING↗
DOE OSTI2022

Structural and Optical Properties of High Entropy (La,Lu,Y,Gd,Ce)AlO 3 Perovskite Thin Films

Mixtures of Ce-doped rare-earth aluminum perovskites are drawing a significant amount of attention as potential scintillating devices. However, the synthesis of complex perovskite systems leads to many challenges. Designing the A-site cations with an equiatomic ratio allows for the stabilization of a single-crystal phase driven by an entropic regime. This work describes the synthesis of a highly epitaxial thin film of configurationally disordered rare-earth aluminum perovskite oxide (La 0.2 Lu 0.2 Y 0.2 Gd 0.2 Ce 0.2 )AlO 3 and characterizes the structural and optical properties. The thin films exhibit three equivalent epitaxial domains having an orthorhombic structure resulting from monoclinic distortion of the perovskite cubic cell. An excitation of 286.5 nm from Gd 3+ and energy transfer to Ce 3+ with 405 nm emission are observed, which represents the potential for high-energy conversion. These experimental results also offer the pathway to tunable optical properties of high-entropy rare-earth epitaxial perovskite films for a range of applications.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Using Light to Enhance Charge Transfer in Battery Materials: Increasing Charging Rates in LiNi 0.5 Mn 1.5 O 4

Electrochemical, spectroscopic, and computational studies on the interplay between light perturbation and coupled electron and Li-ion transfer in LiNi 0.5 Mn 1.5 O 4 (LNMO) cathodes identify that photon perturbation moves the system out of equilibrium, increases entropy, lowers the impedance of the battery, and increases the charging capacity by at least 15% during fast charging by promoting the oxidation of Ni 3+ to Ni 4+ . Here, the correlation with density functional theory calculations points out that oxidation of Ni 3+ faces a 30% higher barrier compared with the oxidation of Ni 2+ and hence exhibits greater responses to the energy transferred from photons. Structural analysis elucidates that photon energy also assists the transition of LNMO from the Jahn−Teller distorted asymmetric lattice with Ni 3+ to the nondistorted Ni 4+ . Synergistically, photons energize the removal of electrons from Ni 3+ and create photoinduced Ni 4+ intermediates, followed by the removal of Li + with almost two times faster diffusion rates.

5 V spinel↗
DOE OSTI2023

Data-driven, structure-preserving approximations to entropy-based moment closures for kinetic equations

In this study, we present a data-driven approach for approximating entropy-based closures of moment systems from kinetic equations. The proposed closure learns the entropy function by fitting the map between the moments and the entropy of the moment system, and thus does not depend on the spacetime discretization of the moment system or specific problem configurations such as initial and boundary conditions. With convex and C 2 approximations, this data-driven closure inherits several structural properties from entropy-based closures, such as entropy dissipation, hyperbolicity, and H-Theorem. We construct convex approximations to the Maxwell–Boltzmann entropy using convex splines and neural networks, test them on the plane source benchmark problem for linear transport in slab geometry, and compare the results to the standard, entropy-based systems which solve a convex optimization problem to find the closure. Numerical results indicate that these data-driven closures provide accurate solutions in much less computation time than that required by the optimization routine.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Information transfer with a twist

Holographic duals for CFTs compactified on a Riemann surface Σ with a twist are cast in the language of wedge holography. Σ starts as part of the field theory geometry in the UV and becomes part of the internal space in the IR. This allows to associate entanglement entropies with splits of the internal space in the IR geometry. Decomposing the internal space in the IR and geometrizing the corresponding subsystems separately leads to two interacting gravitational systems, similar to the intermediate holographic description in braneworld models. For Σ = T 2 the setups are used to model information transfer from a black hole to a gravitating bath. This leads to Page curves with a phase structure which precisely mirrors that in braneworld models. The transition from geometric to non-geometric entropies is also discussed for Σ = S 2 as a model for more general internal spaces in AdS/CFT.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Reversible Ligand Protonation in Noninnocent Constrained-Geometry-Like Group 4 Complexes

The proligands C 5 H 5 CMe 2 CHPhOx R (R = Me 2 , CHMe 2 , and CMe 3 ) react with M(NMe 2 ) 4 (M = Ti, Zr, and Hf) to give monodeprotonated (Ox R CHPhCMe 2 C 5 H 4 )M(NMe 2 ) 3 , doubly deprotonated (C 5 H 4 CMe 2 CPhOx R )M(NMe 2 ) 2 , or a mixture of both. The observed products depend on reaction conditions, the oxazoline substituent, and the metal center, with 4-t-butyl-oxazoline or Ti giving only the monodeprotonated (Ox R CHPhCMe 2 C 5 H 4 )M(NMe 2 ) 3 . Amine elimination from (Ox R CHPhCMe 2 C 5 H 4 )M(NMe 2 ) 3 to give (C 5 H 4 CMe 2 CPhOx R )M(NMe 2 ) 2 is reversible for 4,4-dimethyl- and 4-isopropyl-oxazoline-based ligands in Zr or Hf complexes. Temperature-dependent kinetic studies of the equilibration of (C 5 H 4 CMe 2 CPhOx Me2 )Zr(NMe 2 ) 2 , HNMe 2 and (Ox Me2 CHPhCMe 2 C 5 H 4 )Zr(NMe 2 ) 3 provide the experimental thermodynamic parameters ΔS° = -17.4 ± 2.6 cal·mol –1 K –1 and ΔH° = -6.8 ± 0.8 kcal·mol –1 . An Eyring plot of the rate constants, determined from the system as it approaches equilibrium, gives the activation entropy and activation enthalpy for the addition of (C 5 H 4 CMe 2 CPhOx Me2 )Zr(NMe 2 ) 2 and HNMe 2 as -36 ± 4 cal·mol –1 K –1 and 8.9 ± 1.3 kcal·mol –1 , respectively; the elimination of HNMe 2 from (Ox Me2 CHPhCMe 2 C 5 H 4 )Zr(NMe 2 ) 3 is characterized by ΔS ‡ = -19 ± 5 cal·mol –1 K –1 and ΔH ‡ = 15.7 ± 1.5 kcal·mol –1 . DFT computational models indicate a single-step, nonlinear transfer of the H between the benzylic position of the noninnocent, oxazoline-coordinated ligand and NMe 2 . Computations also confirm the negative activation entropy and the trends in the barriers support the experimental results. Together, these studies indicate the importance of steric effects from the oxazoline ligand, metal center, ancillary ligands, and leaving group on the shuttling of the proton between HNMe 2 and the noninnocent ligand. Finally, these effects suggest that coordination of oxazoline to the metal center is a key part of the benzylic deprotonation and noninnocent behavior of the cyclopentadienyl-oxazoline ligand.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

High-entropy halide perovskite single crystals stabilized by mild chemistry

High entropy materials are excellent candidates for a range of functional materials but traditionally require high-temperature synthetic procedures over 1000°C and complex processing techniques such as hot rolling to form. One route to address the extreme synthetic requirements for high entropy materials should involve designing crystal structures with ionic bonding networks and low cohesive energies. Here, we develop room-temperature (20°C) and low temperature (80°C) solution synthesis procedures for a new class of metal-halide perovskite high entropy semiconductor (HES) single crystals. Due to the soft, ionic lattice nature of the class of metal-halide perovskites, these HES single crystals are designed on the cubic Cs 2 MCl 6 (M = Zr 4+ , Sn 4+ , Te 4+ , Hf 4+ , Re 4+ , Os 4+ , Ir 4+ , or Pt 4+ ) vacancy-ordered double perovskite structure from the self-assembly of stabilized complexes in multielement inks, namely free Cs + cations and five or six different isolated [MCl6] 2- anionic octahedral molecules well-mixed in strong hydrochloric acid. The resulting single-phase single crystals span two HES families of five- and six-elements occupying the M-site as a random alloy in near-equimolar ratios, with the overall Cs 2 MCl 6 crystal structure and stoichiometry maintained. In conclusion, the incorporation of various [MCl 6 ] 2- octahedral molecular orbitals disordered across the high entropy five- and six-element Cs 2 MCl 6 single crystals produces complex vibrational and electronic structures with energy transfer interactions between the confined exciton states of the five or six different isolated octahedral molecules.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Stochastic relativistic viscous hydrodynamics from the Metropolis algorithm

We propose an algorithm for simulating stochastic relativistic fluid dynamics based on Metropolis updates. Each step of the algorithm begins with an update based on ideal hydrodynamics. This is followed by proposing random (spatial) momentum transfers between fluid cells, keeping the total energy fixed. These proposals are then accepted or rejected using the change in entropy as a statistical weight. The algorithm reproduces relativistic viscous hydrodynamics in the “density frame,” which is a formulation of viscous hydrodynamics we review and clarify here. This formulation is first order in time and requires no auxiliary dynamical fields such as Π 𝜇⁢𝜈 . The only parameters are the shear and bulk viscosities and the equation of state. Here, by adopting the 3+1 split of general relativity, we extend the Metropolis algorithm to general space-time coordinates, such as Bjorken coordinates, which are commonly used to simulate heavy-ion collisions.

Hydrodynamic noise↗
DOE OSTI2020

An Entropy-Maximization Approach to Automated Training Set Generation for Interatomic Potentials

Machine learning-based interatomic potentials are currently garnering a lot of attention as they strive to achieve the accuracy of electronic structure methods at the computational cost of empirical potentials. Given their generic functional forms, the transferability of these potentials is highly dependent on the quality of the training set, the generation of which can be highly labor-intensive. Good training sets should at once contain a very diverse set of configurations while avoiding redundancies that incur cost without providing benefits. We formalize these requirements in a local entropy-maximization framework and propose an automated sampling scheme to sample from this objective function. We show that this approach generates much more diverse training sets than unbiased sampling and is competitive with hand-crafted training sets.

74 ATOMIC AND MOLECULAR PHYSICS↗