Search NASA⌕ Search

SEARCH · Search NASA

Results for “tropospheric ozone”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Deep Convection‐Driven Downward Transport of Trace Gases and Aerosols From the Free Troposphere to the Boundary Layer

Deep convective clouds regulate Earth's energy and moisture budgets, yet their impact on the atmospheric boundary layer (BL) composition remains underexplored. Using long-term observations from three mid-latitude sites, we show that deep convection (DC) consistently enhances nighttime surface ozone and is often accompanied by modest increases in ultrafine particle concentrations. Within the BL, the condensational growth of these transported ultrafine particles may contribute up to 60% of total cloud condensation nuclei (CCN). Mass flux calculations suggest that short-lived convective cores (∼30 min) account for ∼2% of total vertical air mass transport relative to steady entrainment, increasing to ∼13% when the trailing stratiform regions are included. These results show that DC provides an episodic but efficient pathway linking the free troposphere and BL, influencing oxidant budgets, CCN variability, and climate forcing. Accurately representing this process in climate models may help reduce uncertainties in climate projections, under both preindustrial and present-day conditions.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Sensitivity of deep convection and cross-tropopause water transport to microphysical parameterizations in WRF

Deep convective storms can overshoot the tropopause, thus altering the composition of the stratosphere by vertically transporting tropospheric air. The transport of water vapor and ice particles into a sub-saturated environment can hydrate the stratosphere, with implications for radiative forcing and ozone chemistry. Cloud-resolved models, if employed at high spatial resolutions, are used to probe process-level questions about cross-tropopause deep convective hydration and its controls. There is considerable diversity in model representations of processes associated with water transport and transformation, and the choice of a microphysics scheme affects model skill in simulating deep convective events. This motivates our evaluation of state-of-the-art, as well as widely used standard schemes, in a high spatial- and temporal-resolution framework. Six bulk microphysics schemes were employed in a WRF-LES setup, initialized with a sounding profile representative of a tropopause-overshooting storm. Here, we used an idealized framework to isolate the effect of microphysics on the dominant processes that control the reach of deep convection and stratospheric hydration. All schemes produced the highest reaching updrafts 8-12 hours into the simulation but the strength and persistence of updrafts varied across the schemes; maximum storm heights ranged 9.1-12.6 km across the schemes. Varying microphysics produced large differences in the vertical extent and horizontal aggregation of convection, and an order of magnitude spread in above-tropopause water vapor concentrations.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Reaction of N 2 O with the prototype singlet biradical CH 2 : A theoretical study

Nitrous oxide (N 2 O) is currently the most important ozone-depleting substance emission and is a potent greenhouse gas. It is also a remarkably unreactive chemical species. Any loss processes for N 2 O in the troposphere and combustion can be important. Therefore, as part of an effort to investigate how N 2 O reacts with prototypical chemical species, its reaction with singlet methylene (CH 2 ) is studied here using high accuracy thermochemistry mHEAT-345(Q) calculations, together with two-dimensional (E,J) master equation simulations. Two distinct mechanisms (an addition/elimination and an O-abstraction) have been characterized. The reaction is found to be very fast with a negative temperature dependence.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Unraveling Electronic Effects that Influence the Bimolecular Chemistry of Fluorinated Criegee Intermediates

Ozonolysis is important for the removal of unsaturated volatile organic compounds emitted into the Earth's atmosphere. The alkene + ozone reaction (alkene ozonolysis) forms a carbonyl oxide – a Criegee intermediate (CI). CIs are interesting from an atmospheric chemistry perspective. They are implicated in enhancing the oxidizing capacity of the troposphere and in secondary organic aerosol formation. CIs may participate in bimolecular reactions with trace atmospheric vapors like water and methanol. Here, the chemistry of the two isomers of CFHOO and of CF 3 CHOO with water, water dimer, and methanol is explored. The present study confirms that the syn-conformer is the minimum energy structure for both CIs and that the reactions of anti-CFHOO display slightly lower activation energies cf. syn-CFHOO, thus promoting faster reaction. For both syn- and anti-CFHOO, the energy barrier in the pathway to adding water, water dimer, or methanol is lower—and the overall reaction exoergicity greater—than for the corresponding reactions involving the nonfluorinated analogue, CH 2 OO. Here, the corresponding bimolecular reaction rates are thus predicted to be faster for CFHOO than CH 2 OO. Similar reactivity trends are found when comparing the same reactions of syn-CF 3 CHOO, cf. syn-CH 3 CHOO, but not when comparing the energetics of the reactions involving anti-CF 3 CHOO cf. anti-CH 3 CHOO.

Guidry, Lily M. [University of Louisiana at Lafaye↗
DOE OSTI2024

The Modeled Seasonal Cycles of Surface N 2 O Fluxes and Atmospheric N 2 O

Nitrous oxide (N 2 O) is a greenhouse gas and stratospheric ozone-depleting substance with large and growing anthropogenic emissions. Previous studies identified the influx of N 2 O-depleted air from the stratosphere to partly cause the seasonality in tropospheric N 2 O (aN 2 O), but other contributions remain unclear. Here, we combine surface fluxes from eight land and four ocean models from phase 2 of the Nitrogen/N 2 O Model Intercomparison Project with tropospheric transport modeling to simulate aN 2 O at eight remote air sampling sites for modern and pre-industrial periods. Models show general agreement on the seasonal phasing of zonal-average N 2 O fluxes for most sites, but seasonal peak-to-peak amplitudes differ several-fold across models. The modeled seasonal amplitude of surface aN 2 O ranges from 0.25 to 0.80 ppb (interquartile ranges 21%–52% of median) for land, 0.14–0.25 ppb (17%–68%) for ocean, and 0.28–0.77 ppb (23%–52%) for combined flux contributions. The observed seasonal amplitude ranges from 0.34 to 1.08 ppb for these sites. The stratospheric contributions to aN 2 O, inferred by the difference between the surface-troposphere model and observations, show 16%–126% larger amplitudes and minima delayed by ~1 month compared to Northern Hemisphere site observations. Land fluxes and their seasonal amplitude have increased since the pre-industrial era and are projected to grow further under anthropogenic activities. Our results demonstrate the increasing importance of land fluxes for aN 2 O seasonality. Considering the large model spread, in situ aN 2 O observations and atmospheric transport-chemistry models will provide opportunities for constraining terrestrial and oceanic biosphere models, critical for projecting carbon-nitrogen cycles under ongoing global warming.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Summertime ozone pollution in China affected by stratospheric quasi-biennial oscillation

In recent years, the near-surface ozone (O 3 ) level has been rising fast in China, with increasing damage to human health and ecosystems. In this study, the impact of stratospheric quasi-biennial oscillation (QBO) on interannual variations in summertime tropospheric O 3 over China is investigated based on GEOS-Chem model simulations and satellite retrievals. QBO has a significant positive correlation with near-surface O 3 concentrations over central China (92.5–112.5° E, 26–38° N) when the sea surface temperature (SST) over the eastern tropical Pacific is warmer than normal, with a correlation coefficient of 0.53, but QBO has no significant effect on O 3 under the cold SST anomaly. Compared to the easterly phase of QBO, the near-surface O 3 concentrations have an increase of up to 3 ppb (5% relative to the average) over central China during its westerly phase under the warm SST anomaly. O 3 also increases above the surface and up to the upper troposphere, with a maximum increase of 2–3 ppb (3%–5%) in 850–500 hPa over central China when comparing westerly phase to easterly phase. Process-based analysis and sensitivity simulations suggest that the O 3 increase over central China is mainly attributed to the anomalous downward transport of O 3 during the westerly phase of QBO when a warm SST anomaly occurs in the eastern tropical Pacific, while the local chemical reactions and horizontal transport processes partly offset the O 3 increase. This work suggests a potentially important role of QBO and the related vertical transport process in affecting near-surface O 3 air quality, with an indication for O 3 pollution prediction and prevention.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Effective radiative forcing and adjustments in CMIP6 models

Abstract. The effective radiative forcing, which includes the instantaneous forcing plus adjustments from the atmosphere and surface, has emerged as the key metric of evaluating human and natural influence on the climate. We evaluate effective radiative forcing and adjustments in 17 contemporary climate models that are participating in the Coupled Model Intercomparison Project (CMIP6) and have contributed to the Radiative Forcing Model Intercomparison Project (RFMIP). Present-day (2014) global-mean anthropogenic forcing relative to pre-industrial (1850) levels from climate models stands at 2.00 (±0.23) W m−2, comprised of 1.81 (±0.09) W m−2 from CO2, 1.08 (± 0.21) W m−2 from other well-mixed greenhouse gases, −1.01 (± 0.23) W m−2 from aerosols and −0.09 (±0.13) W m−2 from land use change. Quoted uncertainties are 1 standard deviation across model best estimates, and 90 % confidence in the reported forcings, due to internal variability, is typically within 0.1 W m−2. The majority of the remaining 0.21 W m−2 is likely to be from ozone. In most cases, the largest contributors to the spread in effective radiative forcing (ERF) is from the instantaneous radiative forcing (IRF) and from cloud responses, particularly aerosol–cloud interactions to aerosol forcing. As determined in previous studies, cancellation of tropospheric and surface adjustments means that the stratospherically adjusted radiative forcing is approximately equal to ERF for greenhouse gas forcing but not for aerosols, and consequentially, not for the anthropogenic total. The spread of aerosol forcing ranges from −0.63 to −1.37 W m−2, exhibiting a less negative mean and narrower range compared to 10 CMIP5 models. The spread in 4×CO2 forcing has also narrowed in CMIP6 compared to 13 CMIP5 models. Aerosol forcing is uncorrelated with climate sensitivity. Therefore, there is no evidence to suggest that the increasing spread in climate sensitivity in CMIP6 models, particularly related to high-sensitivity models, is a consequence of a stronger negative present-day aerosol forcing and little evidence that modelling groups are systematically tuning climate sensitivity or aerosol forcing to recreate observed historical warming.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

A comparative study of two-way and offline coupled WRF v3.4 and CMAQ v5.0.2 over the contiguous US: performance evaluation and impacts of chemistry–meteorology feedbacks on air quality

The two-way coupled Weather Research and Forecasting and Community Multiscale Air Quality (WRF-CMAQ) model has been developed to more realistically represent the atmosphere by accounting for complex chemistry–meteorology feedbacks. In this study, we present a comparative analysis of two-way (with consideration of both aerosol direct and indirect effects) and offline coupled WRF v3.4 and CMAQ v5.0.2 over the contiguous US. Long-term (5 years from 2008 to 2012) simulations using WRF-CMAQ with both offline and two-way coupling modes are carried out with anthropogenic emissions based on multiple years of the U.S. National Emission Inventory and chemical initial and boundary conditions derived from an advanced Earth system model (i.e., a modified version of the Community Earth System Model/Community Atmospheric Model). The comprehensive model evaluations show that both two-way WRF-CMAQ and WRF-only simulations perform well for major meteorological variables such as temperature at 2 m, relative humidity at 2 m, wind speed at 10 m, precipitation (except for against the National Climatic Data Center data), and shortwave and longwave radiation. Both two-way and offline CMAQ also show good performance for ozone (O3) and fine particulate matter (PM 2.5 ). Due to the consideration of aerosol direct and indirect effects, two-way WRF-CMAQ shows improved performance over offline coupled WRF and CMAQ in terms of spatiotemporal distributions and statistics, especially for radiation, cloud forcing, O 3 , sulfate, nitrate, ammonium, elemental carbon, tropospheric O 3 residual, and column nitrogen dioxide (NO 2 ). For example, the mean biases have been reduced by more than 10 W m –2 for shortwave radiation and cloud radiative forcing and by more than 2 ppb for max 8 h O 3 . However, relatively large biases still exist for cloud predictions, some PM 2.5 species, and PM 10 that warrant follow-up studies to better understand those issues. The impacts of chemistry–meteorological feedbacks are found to play important roles in affecting regional air quality in the US by reducing domain-average concentrations of carbon monoxide (CO), O 3 , nitrogen oxide (NO x ), volatile organic compounds (VOCs), and PM 2.5 by 3.1 % (up to 27.8 %), 4.2 % (up to 16.2 %), 6.6 % (up to 50.9 %), 5.8 % (up to 46.6 %), and 8.6 % (up to 49.1 %), respectively, mainly due to reduced radiation, temperature, and wind speed. The overall performance of the two-way coupled WRF-CMAQ model achieved in this work is generally good or satisfactory and the improved performance for two-way coupled WRF-CMAQ should be considered along with other factors in developing future model applications to inform policy making.

58 GEOSCIENCES↗
DOE OSTI2025

Source attribution of near-surface ozone pollution in Jiangsu Province of China over 2013–2019

Near-surface ozone (O3) is one of the most severe air pollutants in China, particularly over densely populated Jiangsu Province in the Yangtze River Delta. In this study, an O3 source tagging technique is utilized in a chemistry-climate model to quantify the source contributions of various emission sectors and regions for nitrogen oxides (NOx) and volatile organic compounds (VOCs) to O3 concentrations in Jiangsu Province during 2013–2019. The results show that the near-surface O3 in Jiangsu Province is mainly contributed by surrounding and remote anthropogenic NOx emissions through long-range transport. Local anthropogenic NOx emissions account for only 13 % and 18 % of the annual and summertime mean near-surface O3 in Jiangsu Province, respectively. Anthropogenic NOx emissions from the surface transportation, industry, and energy sectors account for 21 %, 22 % and 20 % of the annual mean near-surface O3 concentration in Jiangsu Province, respectively. Biogenic and anthropogenic VOCs emissions each explains one-third of the annual mean near-surface O3 concentration in Jiangsu, while methane and stratospheric chemical production contribute 21 % and 6 %, respectively. The sources from stratospheric production, aircraft, lightning, and foreign emissions are the primary contributors to O3 in the mid- and high troposphere. During high pollution days in Jiangsu Province, the near-surface O3 concentrations increase with the maximum exceeding 20 ppb, which is attributed to both the enhanced photochemical production and regional transport in favorable meteorological conditions.

ozone pollution↗
DOE OSTI2022

Fast climate responses to emission reductions in aerosol and ozone precursors in China during 2013-2017

China has been implementing a sequence of policies for clean air since the year 2013, and the aerosol pollution has been substantially improved, but ozone (O 3 )-related issues arose. Here, fast climate responses to emission reductions in aerosol and O 3 precursors over China during 2013–2017 are investigated using the Community Earth System Model version 2 (CESM2). The overall decreases in aerosols produced an anomalous warming of 0.09 ± 0.10°C in eastern China (22–40° N, 110–122.5° E), which is further intensified by the increase in O 3 in the lower troposphere, resulting in an enhanced warming of 0.16 ± 0.15° C in eastern China. Reductions in industrial emissions contributed the most to the aerosol-induced warming, while emission reductions from residential sector induced a cooling effect due to a substantial decrease in light-absorbing black carbon aerosols. This implies that switching the residential sector to cleaner energy is more effective to achieve climate and health benefits in China.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

An approach to sulfate geoengineering with surface emissions of carbonyl sulfide

Sulfate geoengineering (SG) methods based on lower stratospheric tropical injection of sulfur dioxide (SO 2 ) have been widely discussed in recent years, focusing on the direct and indirect effects they would have on the climate system. Here a potential alternative method is discussed, where sulfur emissions are located at the surface or in the troposphere in the form of carbonyl sulfide (COS) gas. There are two time-dependent chemistry–climate model experiments designed from the years 2021 to 2055, assuming a 40 Tg-Syr -1 artificial global flux of COS, which is geographically distributed following the present-day anthropogenic COS surface emissions (SG-COS-SRF) or a 6 Tg-Syr -1 injection of COS in the tropical upper troposphere (SG-COS-TTL). The budget of COS and sulfur species is discussed, as are the effects of both SG-COS strategies on the stratospheric sulfate aerosol optical depth (~Δτ=0.080 in the years 2046–2055), aerosol effective radius (0.46 µm), surface SO x deposition (+8.9 % for SG-COS-SRF; +3.3 % for SG-COS-TTL), and tropopause radiative forcing (RF; ~-1.5 W m –2 in all-sky conditions in both SG-COS experiments). Indirect effects on ozone, methane and stratospheric water vapour are also considered, along with the COS direct contribution. According to our model results, the resulting net RF is –1.3 W m –2 , for SG-COS-SRF, and –1.5 W m –2 , for SG-COS-TTL, and it is comparable to the corresponding RF of –1.7 W m –2 obtained with a sustained injection of 4 Tg-Syr -1 in the tropical lower stratosphere in the form of SO 2 (SG-SO2, which is able to produce a comparable increase of the sulfate aerosol optical depth). Significant changes in the stratospheric ozone response are found in both SG-COS experiments with respect to SG-SO2 (~5 DU versus +1.4 DU globally). According to the model results, the resulting ultraviolet B (UVB) perturbation at the surface accounts for –4.3 % as a global and annual average (versus –2.4 % in the SG-SO2 case), with a springtime Antarctic decrease of –2.7 % (versus a +5.8 % increase in the SG-SO2 experiment). Overall, we find that an increase in COS emissions may be feasible and produce a more latitudinally uniform forcing without the need for the deployment of stratospheric aircraft. However, our assumption that the rate of COS uptake by soils and plants does not vary with increasing COS concentrations will need to be investigated in future work, and more studies are needed on the prolonged exposure effects to higher COS values in humans and ecosystems.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Reconciliation of asynchronous satellite-based $\mathrm{NO_2}$ and $\mathrm{XCO_2}$ enhancements with mesoscale modeling over two urban landscapes

Fossil fuel carbon dioxide (CO 2ff ), the main driver of global warming and climate change, is often co-emitted with nitrogen oxides (NO x ) and precursors to ground-level ozone from anthropogenic sources like power plants or vehicles. In urban and suburban areas, satellite-based NO 2 can be used as a proxy to track the emissions of CO 2ff . Because of NO 2 ’s shorter lifetime, urban NO 2 plumes are more distinguishable from backgrounds and more sensitive to variations in emissions. However, the combination of these two gases is limited by the asynchrony among NO 2 and CO 2 monitoring satellites. We used CO 2ff simulated by the Weather Research and Forecasting model coupled with Chemistry (WRF-Chem) model to reconcile the tropospheric NO 2 vertical column density (VCD) from the Tropospheric Monitoring Instrument (TROPOMI) and column-averaged dry-air mole fractions of carbon dioxide enhancements (ΔXCO 2 ) from Orbiting Carbon Observatory 3 (OCO-3) Snapshot Area Maps (SAMs) over a multicity area, Washington D.C.-Baltimore (DC-Balt), and a basin city, Mexico City. NO 2 /CO 2ff ratios over DC-Balt are smaller than Mexico City, indicative of stricter emission restrictions, a more combustion-efficient vehicle fleet, and higher combustion efficiency due to lower altitude in DC-Balt. For single-track cases, the spatial correlations between NO 2 and ΔXCO 2 over Mexico City are stronger than DC-Balt because the NO 2 and CO 2 are mostly trapped in the valley of Mexico City, while DC-Balt is severely affected by distant sources (i.e., US East Coast cities). Using multi-track averaging, spatial correlation coefficients increase with the number of days used for averaging. The correlations reached a maximum when averaging >12 continuous images for DC-Balt and > 10 continuous images for Mexico City. This finding indicates that multi-track averaging using modeled CO 2ff as a proxy is helpful to filter the noise in single-track images, to cancel the interference from distant sources, and to magnify correlations between NO 2 and CO 2ff . Mexico City showed stronger spatial correlations but weaker temporal correlations than DC-Balt due to biomass burning hot spots and large transport errors caused by the trapping effects of the surrounding mountains. Tracking the 20-day moving average of CO 2ff emissions using TROPOMI NO 2 seems technically feasible, considering the relationship between correlation coefficients and the number of available satellite images.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Role of chemical production and depositional losses on formaldehyde in the Community Regional Atmospheric Chemistry Multiphase Mechanism (CRACMM)

Abstract. Formaldehyde (HCHO) is an important air pollutant with direct cancer risk and ozone-forming potential. HCHO sources are complex because HCHO is both directly emitted and produced from oxidation of most gas-phase reactive organic carbon. We update the secondary production of HCHO in the Community Regional Atmospheric Chemistry Multiphase Mechanism (CRACMM) in the Community Multiscale Air Quality (CMAQ) model. Production of HCHO from isoprene and monoterpenes is increased, correcting an underestimate in the current version. Simulated June–August surface HCHO during peak photochemical production (11:00–15:00 LT, local time) increased by 0.6 ppb (32 %) over the southeastern USA and by 0.2 ppb (13 %) over the contiguous USA. The increased HCHO compares more favorably with satellite-based observations from the TROPOspheric Monitoring Instrument (TROPOMI) and from aircraft-based observations. Evaluation against hourly surface observations indicates a missing nighttime sink that can be improved by increased nighttime deposition, which reduces June–August nocturnal (20:00–04:00 LT) surface HCHO by 1.1 ppb (36 %) over the southeastern USA and 0.5 ppb (29 %) over the contiguous USA. The ability of CRACMM to capture peak levels of HCHO at midday is improved, particularly at sites in the northeastern USA, while peak levels at sites in the southeastern USA are improved, although still lower than observed. Using established risk assessment methods, lifetime exposure of the population in the contiguous USA (∼ 320 million) to ambient HCHO levels predicted here may result in 6200 lifetime cancer cases, with 40 % from controllable anthropogenic emissions of nitrogen oxides and reactive organic compounds. Chemistry updates will be available in CRACMM version 2 (CRACMM2) in CMAQv5.5.

Skipper, T. Nash↗
DOE OSTI2023

Climate, Variability, and Climate Sensitivity of “Middle Atmosphere” Chemistry Configurations of the Community Earth System Model Version 2, Whole Atmosphere Community Climate Model Version 6 (CESM2(WACCM6))

Abstract Simulating whole atmosphere dynamics, chemistry, and physics is computationally expensive. It can require high vertical resolution throughout the middle and upper atmosphere, as well as a comprehensive chemistry and aerosol scheme coupled to radiation physics. An unintentional outcome of the development of one of the most sophisticated and hence computationally expensive model configurations is that it often excludes a broad community of users with limited computational resources. Here, we analyze two configurations of the Community Earth System Model Version 2, Whole Atmosphere Community Climate Model Version 6 (CESM2(WACCM6)) with simplified “middle atmosphere” chemistry at nominal 1 and 2° horizontal resolutions. Using observations, a reanalysis, and direct model comparisons, we find that these configurations generally reproduce the climate, variability, and climate sensitivity of the 1° nominal horizontal resolution configuration with comprehensive chemistry. While the background stratospheric aerosol optical depth is elevated in the middle atmosphere configurations as compared to the comprehensive chemistry configuration, it is comparable among all configurations during volcanic eruptions. For any purposes other than those needing an accurate representation of tropospheric organic chemistry and secondary organic aerosols, these simplified chemistry configurations deliver reliable simulations of the whole atmosphere that require 35% and 86% fewer computational resources at nominal 1 and 2° horizontal resolution, respectively.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Intra-annual variations of regional total column ozone, aerosol optical depth, and water vapor from ground-based, satellite-based and model-based observations

The Microtops II ozonometer has been deployed to continuously measure the total column ozone (TCO), pre-cipitable water content (PWC) and aerosol optical thickness (AOT) at Atigre village (16.74° N, 74.37° E, 604 m above sea level, masl) located on the southeastern slope of Indian western Ghats. The Microtops II ozonometer measurements during the period from September 2017 to June 2018 were analyzed along with the retrieved products of Ozone Monitoring Instrument (OMI) and Moderate Resolution Imaging Spectroradiometer (MODIS) onboard NASA's Terra satellites and also the ERA-interim reanalysis model. We found that the TCO (or PWC) data from the OMI (or MODIS) and the ERA reanalysis model data products are in good agreement. The mea-surements showed strong seasonal variability such that TCO was lowest in the winter season but increased in the summer season, and both PWC and AOT were lowest in the post-monsoon season and increased in the summer season. In continuous ERA-interim reanalysis TCO observations, we found the three types of periodicities in the daily mean TCO as well as PWC (i) The weekly (7 days), (ii) quasi-biweekly (14 to 16 days), (iii) Madden Julian Oscillations (MJO) (30–60 days) oscillations. These oscillations depend on the periodic weather changes in the troposphere. We also observe that the average day to day variability in daily mean TCO observations in the observational period is about 1.4%, 1.1%, 2.62% in the Microtops II ozonometer, ERA-interim reanalysis, and OMI data respectively. We found the positive correlation between daily mean AOT and PWC in all seasons (except monsoon), which is maximum in the winter season, showing the hygroscopic nature of aerosols. The sources of water vapor and aerosol at our location are also studied using back-trajectory analysis.

Nade, Dada R.↗
DOE OSTI2020

Photochemical reactions on aerosols at West Antarctica: A molecular case-study of nitrate formation among sea salt aerosols

Environmental implications of climate change are complex and exhibit regional variations both within and between the polar regions. The increase of solar UV radiation flux over Antarctica due to stratospheric ozone depletion creates the optimal conditions for photochemical reactions on the snow. Modeling, laboratory, and indirect field studies suggest that snowpack process release gases to the atmosphere that can react on sea salt particles in remote regions such as Antarctica, modifying aerosol composition and physical properties of aerosols. Here, we present evidence of photochemical processing in West Antarctica aerosols using microscopic and chemical speciation of individual atmospheric particles. Individual aerosol particles collected at the Brazilian module Criosfera 1 were analyzed by scanning transmission X-ray microscopy with near edge X-ray absorption fine structure spectroscopy (STXM/NEXAFS) combined with computer controlled scanning electron microscopy (CCSEM) with energy-dispersive X-ray (EDX) microanalysis. The displacement of chlorine relative to sodium was observed over most of the sea salt particles. Particles with a chemical composition consistent with NaCl-NO3 contributed up to 30% of atmospheric particles investigated. Overall, this study provides evidence that the snowpack and particulate nitrate photolysis should be considered in dynamic partition equilibrium in the troposphere. Finally, these findings may assist in reducing modeling uncertainties and present new insights into the aerosol chemical composition in the polar environment.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

SCILLA Secondary Aerosol Volume Concentration Airborne Data

This data set contains secondary aerosol volume concentration in cubic micrometers per cubic centimeter (um^3/cm^3). The aerosol was generated in an oxidation flow reactor (OFR) and its volume concentration measured with a scanning mobility particle sizer (SMPS). Both components were designed and built at the University of California Riverside. Ambient particles were removed with a Teflon filter upstream of the OFR and then pure ammonium sulfate particles were added to create a stable aerosol surface area on which low-volatility oxidation products condense. High concentrations of hydroxyl radical (OH) formed inside the OFR accelerate the oxidative chemistry that would typically occur over a period of several days in the atmosphere, resulting in the production of secondary aerosol from precursor gases present in the ambient air. Concentrations of added ozone and water vapor were controlled to produce the desired and approximately constant level of photochemical aging. The reactor temperature was controlled, while the pressure was not, and was always slightly lower than that of the sampled outside air. Sampled air was pulled from above the Naval Postgraduate School’s (NPS) Twin Otter aircraft through a rear-facing, ¼” OD PFA Teflon tube. The sample stream was split between the OFR and several gas analyzers (NOx, CO, O3, and H2O). Though not contained in these files, data from an aerosol mass spectrometer intermittently operated downstream of the OFR are also available.

{"secondary aerosol concentration",aerosol_concent↗
DOE OSTI2021

Urban NO x emissions around the world declined faster than anticipated between 2005 and 2019

Emission inventory development for air pollutants, by compiling records from individual emission sources, takes many years and involves extensive multi-national effort. A complementary method to estimate air pollution emissions is in the use of satellite remote sensing. In this study, NO 2 observations from the Ozone Monitoring Instrument are combined with re-analysis meteorology to estimate urban nitrogen oxide (NO X ) emissions for 80 global cities between 2005 and 2019. The global average downward trend in satellite-derived urban NO X emissions was 3.1%–4.0% yr -1 between 2009 and 2018 while inventories show a 0%–2.2% yr -1 drop over the same timeframe. This difference is primarily driven by discrepancies between satellite-derived urban NO X emissions and inventories in Africa, China, India, Latin America, and the Middle East. In North America, Europe, Korea, Japan, and Australasia, NO X emissions dropped similarly as reported in the inventories. In Europe, Korea, and Japan only, the temporal trends match the inventories well, but the satellite estimate is consistently larger over time. While many of the discrepancies between satellite-based and inventory emissions estimates represent real differences, some of the discrepancies might be related to the assumptions made to compare the satellite-based estimates with inventory estimates, such as the spatial disaggregation of emissions inventories. Overall, our work identifies that the three largest uncertainties in the satellite estimate are the tropospheric column measurements, wind speed and direction, and spatial definition of each city.

54 ENVIRONMENTAL SCIENCES↗