Search NASA⌕ Search

SEARCH · Search NASA

Results for “underperformances”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Deep Learning Reconstruction of Daily Soil CO 2 Efflux Reveals Biogeochemical Insights and Reduces Annual Estimate Uncertainty Despite Limited Daily Predictability

Soil CO 2 efflux is commonly measured monthly or seasonally, leaving daily dynamics poorly resolved and contributing to global estimation uncertainty. We trained a single Long Short-Term Memory (LSTM) model to predict daily soil CO 2 efflux across 82 globally distributed sites in COSORE, with 0.2%–46.9% daily data coverage from 2003 to 2020. Despite using far fewer sites than are typically used to train a single deep learning model, with observations biased toward temperate mesic sites, the LSTM model performed well at approximately one-third of sites, reconstructed nearly 2 decades of daily efflux, and outperformed commonly used approaches for estimating daily efflux when applied to the same data set. Performance was weakest at pronounced peaks and troughs and at non-temperate sites with <1.5 years of observations and irregular data patterns. Nevertheless, annual efflux from reconstructed daily data had <40% error even at underperforming sites, substantially improving estimates derived from monthly and seasonal sampling (maximum errors of 95% and 136%, respectively). Temperature sensitivity (Q 10 ) estimated from reconstructed daily predictions closely matched estimates from daily observations, whereas Q 10 values derived from monthly or seasonal observations deviated substantially, suggesting that coarse temporal sampling may contribute to uncertainty in reported Q 10 values. Consistent daily reconstructions further enabled trend analyses for well-performing, predominantly temperate sites and showed increasing soil CO 2 efflux at most sites from 2003 to 2020, with more variable summer trends. Despite limitations, these results demonstrate the potential of LSTM models to reconstruct daily soil CO 2 efflux and reduce estimation uncertainties from sparse observations.

Smykalov, Valerie [Pennsylvania State University, ↗

A Comparative Study of Physics‐Informed and Data‐Driven Neural Networks for Compound Flood Simulation at River‐Ocean Interfaces: A Case Study of Hurricane Irene

Simulating compound flooding (CF) at the river-ocean interface within large-scale Earth System Models (ESMs) presents significant challenges due to complex interactions between river discharge, storm surge, and tides. This study assesses the comparative advantages of physics-informed and data-driven machine learning (ML) approaches for enhancing local ESM performance. We systematically compare data-driven neural network models (i.e., CNNs, U-Net, Long Short-Term Memory (LSTM), Gated Recurrent Unit), and physics-informed neural network (PINN) models, including vanilla PINN and a finite-difference-based PINN (FD-PINN). Specifically, FD-PINN is introduced to enhance computational efficiency, accelerating vanilla PINNs by ∼6.5 times while improving accuracy. To enhance data-driven model training, a new data-generation approach is developed to sample historical fluvial and coastal flood events, which ensures a robust data set for extreme event prediction. The models are evaluated using a realistic one-dimensional river domain extracted from an ESM's river mesh and the Hurricane Irene event as an independent test case. Results show that FD-PINN achieves accurate predictions with significantly reduced computational costs relative to vanilla PINNs. Among data-driven models, the best overall performance is achieved by a CNN-LSTM hybrid, which balances accuracy and efficiency. While a fully connected CNN (CNN-FC) provides the best accuracy, it incurs high computational cost. Architectures lacking strong temporal modeling tend to underperform on unseen events. These findings highlight the importance of sequence-aware designs for robust generalization. This study reveals the trade-offs between physics-informed and data-driven models and proposes an adaptive hybrid framework for integrating ML into ESMs to enhance local flood simulations.

Earth Systems Modeling↗

A Deep State Space Model for Rainfall‐Runoff Simulations

The classical way of studying the rainfall‐runoff processes in the water cycle relies on conceptual or physically‐based hydrologic models. Deep learning (DL) has recently emerged as an alternative and blossomed in the hydrology community for rainfall‐runoff simulations. However, the decades‐old Long Short‐Term Memory (LSTM) network remains the benchmark for this task, outperforming newer architectures like Transformers. In this work, we propose a State Space Model (SSM), specifically the Frequency Tuned Diagonal State Space Sequence (S4D‐FT) model, for rainfall‐runoff simulations. The proposed S4D‐FT is benchmarked against the established LSTM and a physically‐based Sacramento Soil Moisture Accounting model under in‐sample and out‐of‐sample simulation setups across 531 watersheds in the contiguous United States (CONUS). Results show that S4D‐FT is able to outperform the LSTM model across diverse regions under both simulation setups, especially for regions that feature snowmelt‐driven or intermittent flow regimes. In contrast, S4D‐FT tends to underperform in flashier, high‐magnitude flow regimes, likely due to its global state‐space convolution computation that emphasizes slow, storage‐driven dynamics, which makes it less effective at picking up short bursts and noisy spikes in the data. In summary, our pioneering introduction of the S4D‐FT for rainfall‐runoff simulations challenges the dominance of LSTM in the hydrology community and expands the arsenal of DL tools available for hydrological modeling.

Wang, Yihan [Univ. of Oklahoma, Norman, OK (United↗

Embedding physics domain knowledge into a Bayesian network enables layer-by-layer process innovation for photovoltaics

Process optimization of photovoltaic devices is a time-intensive, trial-and-error endeavor, which lacks full transparency of the underlying physics and relies on user-imposed constraints that may or may not lead to a global optimum. Herein, we demonstrate that embedding physics domain knowledge into a Bayesian network enables an optimization approach for gallium arsenide (GaAs) solar cells that identifies the root cause(s) of underperformance with layer-by-layer resolution and reveals alternative optimal process windows beyond traditional black-box optimization. Our Bayesian network approach links a key GaAs process variable (growth temperature) to material descriptors (bulk and interface properties, e.g., bulk lifetime, doping, and surface recombination) and device performance parameters (e.g., cell efficiency). For this purpose, we combine a Bayesian inference framework with a neural network surrogate device-physics model that is 100× faster than numerical solvers. With the trained surrogate model and only a small number of experimental samples, our approach reduces significantly the time-consuming intervention and characterization required by the experimentalist. As a demonstration of our method, in only five metal organic chemical vapor depositions, we identify a superior growth temperature profile for the window, bulk, and back surface field layer of a GaAs solar cell, without any secondary measurements, and demonstrate a 6.5% relative AM1.5G efficiency improvement above traditional grid search methods.

14 SOLAR ENERGY↗

Ultimate precision limit of noise sensing and dark matter search

Abstract The nature of dark matter is unknown and calls for a systematical search. For axion dark matter, such a search relies on finding feeble random noise arising from the weak coupling between dark matter and microwave haloscopes. We model such process as a quantum channel and derive the fundamental precision limit of noise sensing. An entanglement-assisted strategy based on two-mode squeezed vacuum is thereby demonstrated optimal, while the optimality of a single-mode squeezed vacuum is found limited to the lossless case. We propose a “nulling” measurement (squeezing and photon counting) to achieve the optimal performances. In terms of the scan rate, even with 20-decibel of strength, single-mode squeezing still underperforms the vacuum limit which is achieved by photon counting on vacuum input; while the two-mode squeezed vacuum provides large and close-to-optimum advantage over the vacuum limit, thus more exotic quantum resources are no longer required. Our results highlight the necessity of entanglement assistance and microwave photon counting in dark matter search.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Critical Assessment of Metagenome Interpretation: the second round of challenges

Abstract Evaluating metagenomic software is key for optimizing metagenome interpretation and focus of the Initiative for the Critical Assessment of Metagenome Interpretation (CAMI). The CAMI II challenge engaged the community to assess methods on realistic and complex datasets with long- and short-read sequences, created computationally from around 1,700 new and known genomes, as well as 600 new plasmids and viruses. Here we analyze 5,002 results by 76 program versions. Substantial improvements were seen in assembly, some due to long-read data. Related strains still were challenging for assembly and genome recovery through binning, as was assembly quality for the latter. Profilers markedly matured, with taxon profilers and binners excelling at higher bacterial ranks, but underperforming for viruses and Archaea. Clinical pathogen detection results revealed a need to improve reproducibility. Runtime and memory usage analyses identified efficient programs, including top performers with other metrics. The results identify challenges and guide researchers in selecting methods for analyses.

54 ENVIRONMENTAL SCIENCES↗

Structural differences between human and mouse neurons and their implementation in generative AIs

Mouse and human brains have different functions that depend on their neuronal networks. We analyzed nanometer-scale three-dimensional structures of brain tissues of the mouse medial prefrontal cortex and compared them with structures of the human anterior cingulate cortex. The obtained results indicated that mouse neuronal somata are smaller and neurites are thinner than those of human neurons. We implemented these characteristics of mouse neurons in convolutional layers of a generative adversarial network (GAN) and a denoising diffusion implicit model (DDIM), which were then subjected to image generation tasks using photo datasets of cat faces, cheese, human faces, birds, and automobiles. The mouse-mimetic GAN outperformed a standard GAN in the image generation task using the cat faces and cheese photo datasets, but underperformed for human faces and birds. The mouse-mimetic DDIM gave similar results, suggesting that the nature of the datasets affected the results. Analyses of the five datasets indicated differences in their image entropy, which should influence the number of parameters required for image generation. The preferences of the mouse-mimetic AIs coincided with the impressions commonly associated with mice. The relationship between the neuronal network and brain function should be investigated by implementing other biological findings in artificial neural networks.

generative AI↗

Multiscale analysis of large twist ferroelectricity and swirling dislocations in bilayer hexagonal boron nitride

With its atomically thin structure and intrinsic ferroelectric properties, heterodeformed bilayer hexagonal boron nitride (hBN) has gained prominence in next-generation non-volatile memory applications. However, studies to date have focused almost exclusively on small-twist bilayer hBN, leaving the question of whether ferroelectricity can persist under small heterostrain and large heterodeformation entirely unexplored. In this work, we establish the crystallographic origin of ferroelectricity in bilayer hBN configurations heterodeformed relative to high-symmetry configurations such as AA-stacking and 21.786789° twisted configurations (Σ7), using Smith normal form bicrystallography. We then demonstrate out-of-plane ferroelectricity in bilayer hBN across configurations vicinal to both the AA and Σ7 stackings. Atomistic simulations reveal that AA-vicinal systems support ferroelectricity under both small twist and small strain, with polarization switching in the latter governed by the deformation of swirling dislocations rather than the straight interface dislocations seen in the former. For Σ7-vicinal systems, where existing interatomic potentials underperform particularly under extreme out-of-plane compression, we develop a density-functional-theory-informed continuum framework—the bicrystallography-informed frame-invariant multiscale (BFIM) model, which captures out-of-plane ferroelectricity in heterodeformed configurations vicinal to Σ7 stacking. Interface dislocations in these large heterodeformed bilayer configurations exhibit markedly smaller Burgers vectors compared to interface dislocations in small-twist and small-strain bilayer hBN. The BFIM model reproduces experimental results and provides a powerful, computationally efficient framework for predicting ferroelectricity in large-unit-cell heterostructures where atomistic simulations are prohibitively expensive.

Ahmed, Md Tusher [Univ. of Illinois at Urbana-Cham↗

Validation of Continuous-Energy ENDF/B-VIII.0 16 O, 56 Fe, and 63,65 Cu Cross Sections for Nuclear Criticality Safety Applications

Recently completed cross-section evaluations sponsored in part by the Nuclear Criticality Safety Program were incorporated into the 2018 release of the ENDF/B-VIII.0 cross-section library. Evaluated isotopes of interest to the nuclear data and criticality safety community include 16 O, 56 Fe, and 63,65 Cu. For performance validation, benchmark models defined in the International Criticality Safety Benchmark Evaluation Project Handbook were selected based on energy-integrated k eff sensitivities to total cross sections of interest and compared with experimental values. Of the 102 benchmark configurations that were utilized, 63 are sensitive to 16 O, 32 sensitive to 63,65 Cu, and 25 sensitive to 56 Fe. Selected benchmarks were modeled in SCALE 6.2.3 Criticality Safety Analysis Sequence (CSAS) continuous-energy Monte Carlo k eff calculations with ENDF/B-VII.1, with a hybrid ENDF/B-VII.1 with ENDF/B-VIII.0 data substituted for individual isotopes of interest, and with ENDF/B-VIII.0. ENDF/B-VIII.0 showed improved agreement with experimental k eff for 56 Fe, 63 Cu, elemental copper, and full library substitution while producing lessened agreement for 16 O and 65 Cu. Furthermore, with full library and isotope-specific ENDF/B-VIII.0 performance, a best-case ENDF library was formed by excluding underperforming isotopes’ ENDF/B-VIII.0 data, reverting 16 O and 65 Cu cross sections to ENDF/B-VII.1. This resulted in the average relative deviation between calculated and experimental data improving from 1.45σ for the ENDF/B-VIII.0 library to 1.32σ for the best-case library, relative to benchmark uncertainty.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Machine Learning–Augmented Laser-Induced Breakdown Spectroscopy for Spectral Discrimination of Iron Oxalates

Enhanced characterization and phase identification of post-PUREX Pu Oxalates (PuOXA) are pivotal for nonproliferation and pre-detonation nuclear forensics. Despite significant advances in the characterization of PuO 2 samples, little is known about the impact of both the chemical structure and oxidation states of PuOXA (i.e., Pu(III) and Pu(IV)) have on optical emission signatures. Here, we demonstrate the analytical capabilities of laser-induced breakdown spectroscopy (LIBS) applied to Fe(II) and Fe(III) oxalate samples as surrogates for PuOXA, highlighting the discriminating features in the LIBS emission spectra arising from differences in the oxidation states within mixed FeOXA samples. We report the enhancement of spectral feature selection using Principal Component Analysis (PCA), which enables the analytical superiority of machine learning algorithms such as Linear Discriminant Analysis (LDA), Quadratic Discriminant Analysis (QDA), Partial Least Squares Regression (PLSR), Support Vector Regression (SVR), and Random Forest Regression (RFR) over conventional univariate techniques for phase discrimination and chemometric analysis. Cluster analysis revealed how both matrix effects and laser ablation influence cluster separability by introducing spectral artifacts that misdirect the maximization of variance. PCA-selected emission lines were used in the regression models, demonstrating that both univariate and multivariate linear regression models (i.e., PLSR and SVR) can achieve acceptable performance, with machine learning models outperforming conventional calibration regressions. Furthermore, the application of non-linearly activated PCA-selected emission lines illustrates how simplifying the data while retaining captured variance enables the use of less complex and more computationally efficient models. Furthermore, this is particularly evident in the underperformance of RFR, which suffers from increased computational costs and overfitting owing to its high complexity.

Oxalates↗

Very massive tracers and higher derivative biases

Most of the upcoming cosmological information will come from analyzing the clustering of the Large Scale Structures (LSS) of the universe through LSS or CMB observations. It is therefore essential to be able to understand their behavior with exquisite precision. The Effective Field Theory of Large Scale Structures (EFTofLSS) provides a consistent framework to make predictions for LSS observables in the mildly non-linear regime. Herein we focus on biased tracers. We argue that in calculations at a given order in the dark matter perturbations, highly biased tracers will underperform because of their larger higher derivative biases. A natural prediction of the EFTofLSS is therefore that by simply adding higher derivative biases, highly massive tracers should perform comparably well. We implement this prediction for the halo-halo and the halo-matter power spectra at one loop, and the halo-halo-halo, halo-halo-matter, and halo-matter-matter bispectra at tree-level, and compare with simulations. We find good agreement with the prediction: at $z$ = 0, for all tracers, we are able to match the power spectra up to $k ≃$ 0.28$h$ Mpc -1 , as well as a small set of about 10 2 bispectra triangles up to $k ≃$ 0.17$h$ Mpc -1 . We also discuss the limitations of our study and some avenues to pursue to further establish these findings.

79 ASTRONOMY AND ASTROPHYSICS↗

Machine learning for reducing noise in RF control signals at industrial accelerators

Industrial particle accelerators typically operate in dirtier environments than research accelerators, leading to increased noise in RF and electronic systems. Furthermore, given that industrial accelerators are mass produced, less attention is given to optimizing the performance of individual systems. As a result, industrial accelerators tend to underperform their own hardware capabilities. Improving signal processing for these machines will improve cost and time margins for deployment, helping to meet the growing demand for accelerators for medical sterilization, food irradiation, cancer treatment, and imaging. Our work focuses on using machine learning techniques to reduce noise in RF signals used for pulse-to-pulse feedback in industrial accelerators. Here we review our algorithms and observed results for simulated RF systems, and discuss next steps with the ultimate goal of deployment on industrial systems.

43 PARTICLE ACCELERATORS↗

Formation energy puzzle in intermetallic alloys: Random phase approximation fails to predict accurate formation energies

We performed density functional calculations to estimate the formation energies of intermetallic alloys. We used two semilocal approximations, the generalized gradient approximation (GGA) by Perdew-Burke- Ernzerhof (PBE) and the strongly constrained and appropriately normed (SCAN) meta-GGA. In addition, we utilized two nonlocal DFT functionals, the hybrid HSE06, and the state-of-the-art random phase approximation (RPA). The nonlocal functionals such as HSE06 and RPA yield accurate formation energies of binary alloys with completely-filled d-band metals, where semilocal functionals underperform. The accuracy at the nonlocal functionals is greatly reduced when a partially-filled d-band metal is present in an alloy, while PBE-GGA outperforms in these cases. We show that the accurate prediction of formation energies by any DFT method depends on its ability to predict the accurate electronic properties, e.g., valence d-band contribution to the density of states (DOS). The SCAN meta-GGA often corrects the PBE-DOS, however, it does not provide accurate formation energies compared to PBE. This is assumed to be due to the lack of proper error cancellation that should be expected due to the similar bulk nature of both alloys and their constituents, which may improve with the modification of meta-GGA ingredients. RPA yields too negative formation energies of alloys with partially-filled d-band metals. RPA results can be corrected by restoring the exchange-correlation kernel, thereby improving the short-range electron-electron correlation in metallic densities.

36 MATERIALS SCIENCE↗

Advanced Signal Decomposition Analysis and Anomaly Detection in Photovoltaic Systems

With the rapid expansion of large-scale photovoltaic (PV) plants, it is paramount for solar stakeholders to understand the reliability and efficiency of their plants to inform maintenance decisions, increase production, and understand the design factors that impact performance. Diagnosing underperformance in PV plants is challenging due to the relatively few monitoring points with respect to the large geographic footprint of the plant. This work introduces a cutting-edge method that transforms the analysis and management of key factors influencing PV plant performance, including performance loss rate (PLR), recoverable soiling, and major system changes. Identifying these factors is critical for deriving actionable insights. Leveraging advanced analytical techniques such as wavelet transformation, robust regression, and extreme point analysis, this approach provides a nuanced understanding of these factors. This method has been tested across two synthetic datasets and one real dataset, consistently surpassing existing benchmarks by achieving a lower median mean absolute error and reduced error variability across all comparable components.

14 SOLAR ENERGY↗

Different Damp-Heat-Induced Series Resistance Degradation Behaviors in Fielded Crystalline Silicon Photovoltaic Modules Due to Difference in Bill of Materials

This case study investigates mono-crystalline silicon modules from underperforming portions of a utility-scale photovoltaic power plant. Field-collected I-V curves and electroluminescence imaging suggested that increased series resistance was a primary factor driving module degradation. Selected modules were removed from the field for further analysis, including incremental damp heat accelerated testing, which confirmed a progression in series resistance degradation. Two distinct cell degradation behaviors became apparent during the investigation. Cross-sectional scanning electron microscopy (with elemental analysis) and scanning spreading resistance microscopy identified key differences between the two degradation mechanisms, primarily grid finger width and contact resistance. Additionally, the study highlights the reliability implications of retest requirements in International Electrotechnical Commission 61215 for material changes and how they may have mitigated the degradation observed at this site.

14 SOLAR ENERGY↗

On the Computational Viability of Quantum Optimization for PMU Placement

Using optimal phasor measurement unit placement as a prototypical problem, we assess the computational viability of the current generation D-Wave Systems 2000Q quantum annealer for power systems design problems. We reformulate minimum dominating set for the annealer hardware, solve the reformulation for a standard set of IEEE test systems, and benchmark solution quality and time to solution against the CPLEX optimizer and simulated annealing. For some problem instances the 2000Q outpaces CPLEX. For instances where the 2000Q underperforms with respect to CPLEX and simulated annealing, we suggest hardware improvements for the next generation of quantum annealers.

hardware↗

Performance Index Assessment for the PV Fleet Performance Data Initiative

We report on 250 PV systems throughout the United States, comprising 157 MWdc of system capacity and more than 10,000 monthly performance index (PI) values. Loss factors were isolated including first-year start-up issues, snowfall, soiling and inverter downtime. Inverter availability was found to contribute significant system energy loss during the first six months of operation, with an average of 8% loss occurring during this period, and 2.3% on average thereafter. Other start-up issues beyond inverter downtime, such as partial string outage, contributed additional underperformance in the first year of operation across the fleet. Winter performance was also found to be below summer performance on average, likely due to snowfall. A relationship was found between monthly snowfall accumulation in centimeters and monthly under-performance, indicating a 6%-40% loss in months with measured snowfall, depending on climate. After correcting for availability, snow and startup loss, over 90% of systems were performing within 10% of monthly expectation based on satellite resource data and PVWatts production estimates.

loss factors↗

Analysis of the Mechanical Performance of the 4.2-m-Long MQXFA Magnets for the Hi-Lumi LHC Upgrade

Under the U.S. High Luminosity LHC Accelerator Upgrade Project (HL-LHC AUP), the 150 mm bore, high-field Nb 3 Sn low-{eta}_MQXFA quadrupole magnets are being fabricated, assembled and tested, in the context of the CERN Hi-Luminosity LHC (HL-LHC) upgrade. These magnets have 4.2 m magnetic length and 4.56 m long iron yoke. To date, eight MQXFA magnets have been tested. One of the magnets additionally underwent a successful endurance test with 40 triggered quenches, and two magnets did not perform as expected. This work summarizes for the first time the available strain gauge data from eight identical Nb 3 Sn MQXFA tested magnets, focusing on the endurance test, and on a possible cause of underperformance of the two magnets that did not pass the vertical test. Here we applied methods to prevent this from happening in future MQXFA magnets, which shown to be effective for last two tested magnets.

43 PARTICLE ACCELERATORS↗