Search NASA⌕ Search

SEARCH · Search NASA

Results for “unsteady simulations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS2006

Unsteady Flow Simulation of High-speed Turbopumps

Computation of high-speed hydrodynamics requires high-fidelity simulation to resolve flow features involving transient flow, cavitation, tip vortex and multiple scales of unsteady fluctuations. One example of this type in aerospace is related to liquid-fueled rocket turbopump. Rocket turbopumps operate under severe conditions at very high rotational speeds typically at thousands of rpm. For example, the Shuttle orbiter low-pressure-fuel-turbopump creates transient flow features associated with reverse flows, tip clearance effects, secondary flows, vortex shedding, junction flows, and cavitation effects. Flow unsteadiness originating from the orbiter Low-Pressure-Fuel-Turbopump (LPFTP) inducer is one of the major contributors to the high frequency cyclic loading that results in high cycle fatigue damage to the flow liners just upstream of the LPFTP. The reverse flow generated at the tip of the inducer blades travels upstream and interacts with the bellows cavity. Simulation procedure for this type high-speed hydrodynamic problems requires a method for quantifying multi-scale and multi-phase flow as well as an efficient high-end computing strategy. The current paper presents a high-fidelity computational procedure for unsteady hydrodynamic problems using a high-speed liquid-fueled rocket turbopump.

Kiris, Cetin C.↗
NASA NTRS1989

Unsteady aerodynamic simulation of multiple bodies in relative motion

A prototype method for time-accurate simulation of multiple aerodynamic bodies in relative motion is presented. The method is general and features unsteady chimera domain decomposition techniques and an implicit approximately factored finite-difference procedure to solve the time-dependent thin-layer Navier-Stokes equations. The method is applied to a set of two- and three-dimensional test problems to establish spatial and temporal accuracy, quantify computational efficiency, and begin to test overall code robustness.

Meakin, Robert L.↗
NASA NTRS1989

Unsteady aerodynamic simulation of multiple bodies in relative motion: A prototype method

A prototype method for time-accurate simulation of multiple aerodynamic bodies in relative motion is presented. The method is general and features unsteady chimera domain decomposition techniques and an implicit approximately factored finite-difference procedure to solve the time-dependent thin-layer Navier-Stokes equations. The method is applied to a set of two- and three- dimensional test problems to establish spatial and temporal accuracy, quantify computational efficiency, and begin to test overall code robustness.

Meakin, Robert L.↗
NASA NTRSDate not supplied

Numerical Simulation of An Aspect Ratio 13.5 Common Research Model with Trailing Edge Mini-Flaps

This paper presents an aeroelastic modeling study of an aspect ratio 13.5 wind tunnel scale Common Research Model (CRM) with trailing edge mini-flaps. FUN3D is used for the aeroelastic steady and unsteady simulations at Mach 0.85 and dynamic pressure 230 psf. The aeroelastic simulation results are compared with the in-house developed VSPAERO aeroelastic model results. The incremental aerodynamic coefficients predicted by FUN3D and VSPAERO are close except when the mini-flap deflection angle is 10˚. The control reversal behavior is observed for the wing tip mini-flap. A series of dynamic pressure sweep simulations are performed to determine the control reversal onset point. Unsteady simulation results show that there is no buffet phenomenon observed at angle of attacks 0˚ and 2˚ when the mini-flap is deflected 10˚. The mini-flap oscillation simulations show the nonlinear behavior appears when the deflection angle is about 4˚.

Mini-flap↗
NASA NTRS2014

Steady and Unsteady Nozzle Simulations Using the Conservation Element and Solution Element Method

This paper presents results from computational fluid dynamic (CFD) simulations of a three-stream plug nozzle. Time-accurate, Euler, quasi-1D and 2D-axisymmetric simulations were performed as part of an effort to provide a CFD-based approach to modeling nozzle dynamics. The CFD code used for the simulations is based on the space-time Conservation Element and Solution Element (CESE) method. Steady-state results were validated using the Wind-US code and a code utilizing the MacCormack method while the unsteady results were partially validated via an aeroacoustic benchmark problem. The CESE steady-state flow field solutions showed excellent agreement with solutions derived from the other methods and codes while preliminary unsteady results for the three-stream plug nozzle are also shown. Additionally, a study was performed to explore the sensitivity of gross thrust computations to the control surface definition. The results showed that most of the sensitivity while computing the gross thrust is attributed to the control surface stencil resolution and choice of stencil end points and not to the control surface definition itself.Finally, comparisons between the quasi-1D and 2D-axisymetric solutions were performed in order to gain insight on whether a quasi-1D solution can capture the steady and unsteady nozzle phenomena without the cost of a 2D-axisymmetric simulation. Initial results show that while the quasi-1D solutions are similar to the 2D-axisymmetric solutions, the inability of the quasi-1D simulations to predict two dimensional phenomena limits its accuracy.

Nozzle gross thrust calculations↗
NASA NTRS1983

Time-dependent finite-difference simulation of unsteady interactive flows

The solution of the time-dependent, Reynolds-averaged, Navier-Stokes equations for unsteady, interacting flows by finite-difference algorithms is discussed. Specific examples include (1) unsteady transonic flow over a thick biconvex airfoil, (2) determination of buffet boundaries for a transonic lifting airfoil, (3) the simulation of aileron buzz and (4) dynamic stall. Algorithms considered include explicit methods, mixed (or hybrid) methods, and fully implicit methods. Consideration of time scales for computational stability, computational accuracy, and physical accuracy and the use of time-dependent adaptive meshing to realize computational efficiency are also discussed.

Deiwert, G. S.↗
NASA NTRS2022

Application of Rotor Disk Model in the Overflow CFD Code

To reduce the complexity and to reduce the cost of turnaround time of simulating unsteady flows of rotating blades with moving overset grids, amid-fidelity option is provided in the OVERFLOW computational fluid dynamics analysis to model rotors and propellers as infinitely thin disks. The effect of the flow through the disk is represented by the momentum source terms in the governing Navier-Stokes equations. The model is loosely coupled with the rotorcraft comprehensive analysis CAMRADII. A brief description of the coupling algorithm is provided. Simulations of a single rotor and multiple rotors are shown, including comparisons with measurements and with the full rotor where all blades are modeled, and unsteady simulation performed with moving grids for rotating geometry,

ARMD↗
NASA NTRS2000

Parallel Unsteady Turbopump Simulations for Liquid Rocket Engines

This paper reports the progress being made towards complete turbo-pump simulation capability for liquid rocket engines. Space Shuttle Main Engine (SSME) turbo-pump impeller is used as a test case for the performance evaluation of the MPI and hybrid MPI/Open-MP versions of the INS3D code. Then, a computational model of a turbo-pump has been developed for the shuttle upgrade program. Relative motion of the grid system for rotor-stator interaction was obtained by employing overset grid techniques. Time-accuracy of the scheme has been evaluated by using simple test cases. Unsteady computations for SSME turbo-pump, which contains 136 zones with 35 Million grid points, are currently underway on Origin 2000 systems at NASA Ames Research Center. Results from time-accurate simulations with moving boundary capability, and the performance of the parallel versions of the code will be presented in the final paper.

Kiris, Cetin C.↗
NASA NTRS1998

Numerical Simulations of Unsteady Low-Reynolds-Number Flows Over the APEX Airfoil

Laminar and transitional separation bubbles are an important feature of low-Reynolds-number flows over airfoils. The separation bubbles are unsteady and have a significant impact on the aerodynamic properties of the airfoils. In this paper unsteady low-Reynolds-number separated flows over the APEX airfoil are calculated using a Navier-Stokes solver. The numerical results show the presence of unsteady separation bubbles in the flowfield. An analysis of the numerical results shows that flowfield disturbances are amplified significantly in the separation bubble, leading to periodic vortex shedding. A linear stability analysis of the separated boundary layer is performed and the results show that the dominant wavenumber and frequency in the numerical simulations agree with the most unstable wavenumber and frequency from the linear stability analysis. The numerical results also show the growth and interaction of disturbance waves in the separation bubble. For transonic flows over the APEX airfoil, the calculations show that the presence of shocks causes significant changes in the separation location and consequently, the overall flowfield.

Tatineni, Mahidhar↗
NASA NTRS2002

Higher Order Time Integration Schemes for the Unsteady Navier-Stokes Equations on Unstructured Meshes

The rapid increase in available computational power over the last decade has enabled higher resolution flow simulations and more widespread use of unstructured grid methods for complex geometries. While much of this effort has been focused on steady-state calculations in the aerodynamics community, the need to accurately predict off-design conditions, which may involve substantial amounts of flow separation, points to the need to efficiently simulate unsteady flow fields. Accurate unsteady flow simulations can easily require several orders of magnitude more computational effort than a corresponding steady-state simulation. For this reason, techniques for improving the efficiency of unsteady flow simulations are required in order to make such calculations feasible in the foreseeable future. The purpose of this work is to investigate possible reductions in computer time due to the choice of an efficient time-integration scheme from a series of schemes differing in the order of time-accuracy, and by the use of more efficient techniques to solve the nonlinear equations which arise while using implicit time-integration schemes. This investigation is carried out in the context of a two-dimensional unstructured mesh laminar Navier-Stokes solver.

Jothiprasad, Giridhar↗
NASA NTRS1999

Simulation of Unsteady Hypersonic Combustion Around Projectiles in an Expansion Tube

The temporal evolution of combustion flowfields established by the interaction between wedge-shaped bodies and explosive hydrogen-oxygen-nitrogen mixtures accelerated to hypersonic speeds in an expansion tube is investigated. The analysis is carried out using a fully implicit, time-accurate, computational fluid dynamics code that we developed recently for solving the Navier-Stokes equations for a chemically reacting gas mixture. The numerical results are compared with experimental data from the Stanford University expansion tube for two different gas mixtures at Mach numbers of 4.2 and 5.2. The experimental work showed that flow unstart occurred for the Mach 4.2 cases. These results are reproduced by our numerical simulations and, more significantly, the causes for unstart are explained. For the Mach 5.2 mixtures, the experiments and numerical simulations both produced stable combustion. However, the computations indicate that in one case the experimental data were obtained during the transient phase of the flow; that is, before steady state had been attained.

Yungster, S.↗
NASA NTRS1973

An integrated human thermal system and its unsteady-state simulation

Consideration of an integrated human thermal system consisting of a human thermal system proper and an external thermal device. A mathematical model of the integrated system has been used in a computer simulation, and the simulation results have been verified through comparison with the results of experiments carried out on nine human subjects. The comparison indicates that the model simulates the system reasonably well.

Hsu, F. T.↗
NASA NTRS1982

Numerical simulations of unsteady transonic flow in diffusers

Forced and naturally occurring, self-sustaining oscillations of transonic flows in two-dimensional diffusers were computed using MacCormack's hybrid method. Depending upon the shock strengths and the area ratios, the flow was fully attached or separated by either the shock or the adverse pressure gradient associated with the enlarging diffuser area. In the case of forced oscillations, a sinusoidal plane pressure wave at frequency 300 Hz was prescribed at the exit. A sufficiently large amount of data were acquired and Fourier analyzed. The distrbutions of time-mean pressures, the power spectral density, and the amplitude with phase angle along the top wall and in the core region were determined. Comparison with experimental results for the forced oscillation generally gave very good agreement; some success was achieved for the case of self-sustaining oscillation despite substantial three-dimensionality in the test. An observation of the sequence of self-sustaining oscillations was given.

Liou, M.-S.↗
NASA NTRS1986

Numerical simulation of unsteady, viscous, high-angle-of-attack flows using a partially flux-split algorithm

Viscous separated flow surrounding a hemisphere-cylinder body at angles of attack ranging up to 19 deg in transonic flow has been computed using an implicit, approximately-factored, partially flux-split algorithm. The resulting flowfield structures, including the vortical flow on the leeward side of the body and the three-dimensional separation patterns, have been investigated. The computed results show good qualitative and quantitative agreement with experimental data. Furthermore, visualization of the flowfield patterns has yielded insight into the behavior of the three-dimensional separated flow.

Ying, S. X.↗
NASA NTRS1987

Numerical simulations of unsteady, viscous, transonic flow over isolated and cascaded airfoils using a deforming grid

A compressible, unsteady, full Navier-Stokes, finite difference code was developed for modeling transonic flow through two-dimensional, oscillating cascades. The procedure introduces a deforming grid technique to capture the motion of the airfoils. Results using a deforming grid are presented for both isolated and cascaded airfoils. The load histories and unsteady pressure distributions are predicted for the NASA 64A010 isolated airfoil and compared with existing experimental data. Results show that the deforming grid technique can be used to successfully predict the unsteady flow properties around an oscillating airfoil. The deforming grid technique was extended for modeling unsteady flow in a cascade. The use of a deforming grid simplifies the specification of boundary conditions. Unsteady flow solutions similar to the isolated airfoil predictions are found for a NACA 0012 cascade with zero interblade phase angle and zero stagger. Experimental data for these cases are not available for code validation, but computational results are presented to show sample predictions from the code. Applications of the code to typical turbomachinery flow conditions will be presented in future work.

Huff, Dennis L.↗
NASA NTRS1987

Numerical simulations of unsteady airfoil-vortex interactions

Numerical methods based on the thin layer Navier-Stokes, Euler and transonic small disturbance equations, all three of which use the perturbation form of an implicit numerical algorithm, are used to formulate the unsteady interactions of a moving vortex with a stationary airfoil. Results are presented for both transonic and subsonic flows, as well as for weak and strong interactions. In general, the results exhibit an overwhelming influence of the vortex on the flow field around the airfoil, especially when the convecting vortex is within one chord of the airfoil. It is noted that even the ostensibly weak interactions produced vortex/shock-induced boundary layer separation.

Srinivasan, G. R.↗
NASA NTRS1986

A spectral element method for the simulation of unsteady incompressible flows with heat transfer

The spectral element method is a high-order finite element technique for solution of the Navier-Stokes and energy equations. In the isoparametric spectral element discretization, the domain is broken up into general brick elements, and the dependent and independent variables represented as high-order tensor-product Lagrangian interpolants through Chebyshev collocation points. The nonlinear and convective terms in the governing equations are treated with explicit collocation, while the pressure and diffusive contributions are handled implicitly using variational projection operators. The method is applied to flow past a cylinder, flow in grooved channels, and natural convection in an enclosure.

Karniadakis, George E.↗