Search NASA⌕ Search

SEARCH · Search NASA

Results for “vacuum electronics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS2007

High-Power, High-Efficiency Ka-Band Space Traveling-Wave Tube

The L-3 Communications Model 999H traveling-wave tube (TWT) has been demonstrated to generate an output power of 144 W at 60-percent overall efficiency in continuous-wave operation over the frequency band from 31.8 to 32.3 GHz. The best TWT heretofore commercially available for operation in the affected frequency band is characterized by an output power of only 35 W and an efficiency of 50 percent. Moreover, whereas prior TWTs are limited to single output power levels, it has been shown that the output power of the Model 999H can be varied from 54 to 144 W. A TWT is a vacuum electronic device used to amplify microwave signals. TWTs are typically used in free-space communication systems because they are capable of operating at power and efficiency levels significantly higher than those of solid-state devices. In a TWT, an electron beam is generated by an electron gun consisting of a cathode, focusing electrodes, and an anode. The electrons pass through a hole in the anode and are focused into a cylindrical beam by a stack of periodic permanent magnets and travel along the axis of an electrically conductive helix, along which propagates an electromagnetic wave that has been launched by an input signal that is to be amplified. The beam travels within the helix at a velocity close to the phase velocity of the electromagnetic wave. The electromagnetic field decelerates some of the electrons and accelerates others, causing the beam to become formed into electron bunches, which further interact with the electromagnetic wave in such a manner as to surrender kinetic energy to the wave, thereby amplifying the wave. The net result is to amplify the input signal by a factor of about 100,000. After the electrons have passed along the helix, they impinge on electrodes in a collector. The collector decelerates the electrons in such a manner as to recover most of the remaining kinetic energy and thereby significantly increase the power efficiency of the TWT.

Krawczyk, Richard↗
NASA NTRS2001

Terahertz-Regime, Micro-VEDs: Evaluation of Micromachined TWT Conceptual Designs

Summary form only given. The Terahertz (THz) region of the electromagnetic spectrum (approx.300-3000 GHz) has enormous potential for high-data-rate communications, spectroscopy, astronomy, space research, medicine, biology, surveillance, remote sensing, industrial process control, etc. The most critical roadblock to full exploitation of the THz band is lack of coherent radiation sources that are powerful (0.01-10.0 W continuous wave), efficient (>1 %), frequency agile (instantaneously tunable over 1% bandwidths or more), reliable, and relatively inexpensive. Micro-machined Vacuum Electron Devices (micro-VEDs) represent a promising solution. We describe prospects for miniature, THz-regime TWTs fabricated using micromachining techniques. Several approx.600 GHz conceptual designs are compared. Their expected performance has been analyzed using SD, 2.51), and 3D TWT codes. A folded waveguide (FWG) TWT forward-wave amplifier design is presented based on a Northrop Grumman (NGC) optimized design procedure. This conceptual device is compared to the simulated performance of a novel, micro-VED helix TWT. Conceptual FWG TWT backward-wave amplifiers and oscillators are also discussed. A scaled (100 GHz) FWG TWT operating at a relatively low voltage (-12 kV) is under development at NGC. Also, actual-size micromachining experiments are planned to evaluate the feasibility of arrays of micro-VED TWTs. Progress and results of these efforts are described. This work was supported, in part by AFOSR, ONR, and NSF.

Booske, John H.↗
NASA NTRS2008

Vacuum microelectronics and miniature instruments based on application specific electrode-integrated nanotube cathodes (ASINCs)

JPL has developed high performance cold cathodes using arrays of carbon nanotube bundles thay routinely produce > 15 A/cm2 at 5 to 8 V/μm applied fields for extreme environment vacuum electronics and miniature instrumentation. These cathodes have been monolithically integrated with additional electrodes using double siliconon-insulator process.

Mojarradi, M.M.↗
NASA NTRSDate not supplied

Advanced Material Options for the Portable Life Support System

Meeting an aggressive mass requirement is a challenge for new space suit development efforts, including that of the Exploration Extravehicular Mobility Unit Portable Life Support System (PLSS) government reference design. To reduce overall system mass, titanium was selected as the primary metal for the PLSS backplate and thermal loop. However, galvanically compatible metals (Hastelloy, Inconel, Monel) have relatively high densities and require further design complexities such as coatings and more challenging manufacturing. Efforts to reduce the mass of the government reference design for an International Space Station (ISS) or lunar mission were halted due to the government’s transition to a commercial Extravehicular Activity (EVA) services approach, but research was conducted into methodologies for mass savings using advanced materials. With the advent of a lunar Artemis mission and potential for future Mars missions, mass becomes a more critical driver going forward. Therefore, alternative materials and processes must be considered to fully close the mass requirement. There are many new materials and processes that can be considered; however, considerations must be made to ensure galvanic compatibility, radiation concerns for sensitive electronics, vacuum compatibility, tight tolerances, fluid compatibility with oxygen and water, and thread insert options. Individual PLSS components may have different requirements and need to be considered separately for reducing overall mass. This report will touch on comparisons between advanced materials, focusing on composites, additive manufacturing, and plastics. It will also address the different processes that may need to be applied when using these materials in the harsh environment of space. Lastly, it will look at specific components and make recommendations for options to reduce the mass of each one.

Ryan Ogilvie↗
NASA NTRS2024

Advanced Material Options for the Portable Life Support System (PLSS)

Meeting an aggressive mass requirement is a challenge for new space suit development efforts, including that of the Exploration Extravehicular Mobility Unit Portable Life Support System (PLSS) government reference design. To reduce overall system mass, titanium was selected as the primary metal for the PLSS backplate and thermal loop. However, galvanically compatible metals (Hastelloy, Inconel, Monel) have relatively high densities and require further design complexities such as coatings and more challenging manufacturing. Efforts to reduce the mass of the government reference design for an International Space Station (ISS) or lunar mission were halted due to the government’s transition to a commercial Extravehicular Activity (EVA) services approach, but research was conducted into methodologies for mass savings using advanced materials. With the advent of a lunar Artemis mission and potential for future Mars missions, mass becomes a more critical driver going forward. Therefore, alternative materials and processes must be considered to fully close the mass requirement. There are many new materials and processes that can be considered; however, considerations must be made to ensure galvanic compatibility, radiation concerns for sensitive electronics, vacuum compatibility, tight tolerances, fluid compatibility with oxygen and water, and thread insert options. Individual PLSS components may have different requirements and need to be considered separately for reducing overall mass. This report will touch on comparisons between advanced materials, focusing on composites, additive manufacturing, and plastics. It will also address the different processes that may need to be applied when using these materials in the harsh environment of space. Lastly, it will look at specific components and make recommendations for options to reduce the mass of each one.

Ryan Ogilvie↗
NASA NTRS1975

Effect of electron irradiation in vacuum on FEP-A silicon solar cell covers

The effect of irradiation on the light transmittance of ethylene-propylene-A (FEP-A) was investigated by measuring the short-circuit current of the cells after each of several electron dose increments, immediately after total irradiation, and 16 hours after total irradiation. Results indicated no apparent overall loss in transmission due to irradiation of FEP-A. However, filter wheel measurements revealed a 'darkening' of the FEP-A at the blue end of the spectrum. Some embrittlement of the FEP-A occurred at an accumulated dose of 67,500,000 rads.

Marsik, S. J.↗
NASA NTRS1997

Investigation of Field Emitter Array Vacuum Microtriodes for Space Electronics Applications

Research into processing techniques for fabrication of vacuum microelectronic devices has been carried out, with special emphasis being given to the growth of silicon dioxide thin films. Oxide films ranging from 30 nm to approximately 2 micrometers have been grown on single crystal silicon wafers. Metal-oxide-semiconductor capacitor test structures have been made from some of these oxide films, and current-versus-voltage plots for these structures have been measured. It has been observed that the rate of applied voltage across the oxide films produces marked differences in measured leakage current. Breakdown fields across two of the thinnest oxide films have been measured and are comparable with highest values reported in literature. Several silicon wafers were processed to make field- emitter array diodes, and were delivered to collaborators at NASA-Lewis Research Center for final fabrication steps and testing.

Smith, Mark A.↗
NASA NTRS1972

Dissociative excitation of vacuum ultraviolet emission features by electron impact on molecular gases. 3: CO2

Vacuum ultraviolet multiplets of C I, C II, and O I were produced by electron impact of CO2. Absolute emission cross sections for these multiplets were measured from threshold to 350 eV. The electrostatically focussed electron gun used in this series of experiments is described in detail. The atomic multiplets which were produced by dissociative excitation of CO2 and the cross sections at 100 eV are given. The dependence of the excitation functions on electron energy shows that these multiplets are produced by electric-dipole-allowed transitions in CO2.

Mumma, M. J.↗
NASA NTRS1972

Dissociative excitation of vacuum ultraviolet emission features by electron impact on molecular gases. 3: CO2

Vacuum ultraviolet multiplets of C I, C II, and O I were produced by electron impact on CO2. Absolute emission cross sections for these multiplets were measured from threshold to 350 eV. The electrostatically focused electron gun used is described in detail. The atomic multiplets which were produced by dissociative excitation of CO2 and the cross sections at 100 eV are presented. The dependence of the excitation functions on electron energy shows that these multiplets are produced by electric-dipole-allowed transitions in CO2.

Mumma, M. J.↗
NASA NTRS1981

Testing of a spacecraft model in a combined environment simulator

A scale model of a satellite was tested in a large vacuum facility under electron bombardment and vacuum ultraviolet radiation to investigate the charging of dielectric materials on curved surfaces. The model was tested both stationary and rotating relative to the electron sources as well as grounded through one megohm and floating relative to the chamber. Surface potential measurements are presented and compared with the predictions of computer modelling of the stationary tests. Discharge activity observed during the stationary tests is discussed and signals from sensing devices located inside and outside of the model are presented.

Staskus, J. V.↗
NASA NTRS1981

Testing of a spacecraft model in a combined environment simulator

A scale model of a satellite was tested in a large vacuum facility under electron bombardment and vacuum ultraviolet radiation to investigate the charging of dielectric materials on curved surfaces. The model was tested both stationary and rotating relative to the electron sources as well as grounded through one megohm and floating relative to the chamber. Surface potential measurements are presented and compared with the predictions of computer modelling of the stationary tests. Discharge activity observed during the stationary tests is discussed and signals from sensing devices located inside and outside of the model are presented.

Staskus, J. V.↗
NASA NTRS1993

Electron excitation of the H2(a 3Sigma(g)(+) - b 3Sigma(u)(+)) continuum in the vacuum ultraviolet

The electron excitation function for the H2(a 3Sigma(g)(+) - b 3Sigma(u)(+)) continuum emission has been measured from 11 to 30 eV at 195.0 nm. The emission cross, section data have been combined with electron energy loss cross section measurements to extend the experimental data to 60 eV. The excitation cross section has been estimated by normalizing the data to the electron energy loss cross section at 20 eV and using a model to account for emission from the entire band system. The spin forbidden excitation of the a 3Sigma(g)(+) state is a major dissociative channel of H2 at low energy with a peak cross section of 1.7 +/- 0.85 x 10 exp -17 sq cm at 15.5 eV. The FWHM of the cross section is 7 eV. The high energy dependence of the cross section has a rapid 1/E-cubed fall off with electron energy, E, above 50 eV. A modified Born approximation analysis was applied to the data to provide an analytic model.

Ajello, J. M.↗