Search NASA⌕ Search

SEARCH · Search NASA

Results for “velocity data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1999

Photon-Weighted Midpoint Exposure Meter for Keck/HIRES Extrasolar Planet Research

NASA Grant was received for research involving the construction of a photon-weighting midpoint exposure meter for the Keck HIRES spectrometer, and for support of our NASA/Keck-based planet research with this instrumentation. The research funds were also to be used to make our iodine cell calibration system and exposure meter available to the NASA Keck observing community. Progress this past year, the second of the 3-year granting period, involved work in 4 areas: 1) Further construction of the midpoint exposure meter. 2) Assisting observers with use of the Iodine system. 3) Acquisition of precision radial velocity data on our program star sample with continued monitoring to proceed in subsequent years as available telescope time permits. 4) Reduction and analysis of incoming precision radial velocity data to reject problematic and uninteresting program stars, and to identify promising planet candidates.

Source record↗
NASA NTRS2021

TESS-Keck Survey. V. Twin Sub-Neptunes Transiting the Nearby G Star HD 63935

We present the discovery of two nearly identically sized sub-Neptune transiting planets orbiting HD 63935, abright(V=8.6 mag), Sun-like(Teff=5560 K)star at 49 pc. TESS identified thefirst planet, HD 63935 b(TOI-509.01), in Sectors 7 and 34. We identified the second signal(HD 63935 c)in Keck High Resolution EchelleSpectrometer and Lick Automated Planet Finder radial velocity data as part of our follow-up campaign. It wassubsequently confirmed with TESS photometry in Sector 34 as TOI-509.02. Our analysis of the photometric andradial velocity data yielded a robust detection of both planets with periods of 9.0600±0.007 and 21.40±0.0019days, radii of 2.99±0.14 and 2.90±0.13R⊕, and masses of 10.8±1.8 and 11.1±2.4M⊕. We calculated densities for planets b and c consistent with a few percent of the planet mass in hydrogen/helium envelopes. Wealso describe our survey’s efforts to choose the best targets for James Webb Space Telescope atmospheric follow-up. These efforts suggest that HD 63935 b has the most clearly visible atmosphere of its class. It is the best targetfor transmission spectroscopy(ranked by the transmission spectroscopy metric, a proxy for atmosphericobservability)in the so far uncharacterized parameter space comprising sub-Neptune-sized(2.6R⊕<Rp<4R⊕),moderately irradiated(100F⊕<Fp<1000F⊕)planets around G stars. Planet c is also a viable target fortransmission spectroscopy, and given the indistinguishable masses and radii of the two planets, the system servesas a natural laboratory for examining the processes that shape the evolution of sub-Neptune planets.

Nicholas Scarsdale↗
NASA NTRS1979

The Urbana coherent-scatter radar: Synthesis and first results

A coherent scatter radar system was synthesized and several hundred hours of echo power and line of sight velocity data obtained. The coherent scatter radar utilizes a diode array and components from meteor radar. The receiving system permits a time resolution of one minute in the data. Echo power from the D region shows a high degree of variability from day to day. Examples of changes in power level at shorter time scales are observed. Velocity data show the existence of gravity waves and occasionally exhibit vertical standing wave characteristics.

Gibbs, K. P.↗
NASA NTRS2000

Flow Environment Study Near the Empennage of a 15-Percent Scale Helicopter Model

Development of advanced rotorcraft configurations has highlighted a need for high-quality experimental data to support the development of flexible and accurate analytical design tools. To provide this type of data, a test program was conducted in the Langley 14- by 22-Foot Subsonic Tunnel to measure the flow near the empennage of a 15-percent scale powered helicopter model with an operating tail fan. Three-component velocity profiles were measured with laser velocimetry (LV) one chord forward of the horizontal tail for four advance ratios to evaluate the effect of the rotor wake impingement on the horizontal tail angle of attack. These velocity data indicate the horizontal tail can experience unsteady angle of attack variations of over 30 degrees due to the rotor wake influence. The horizontal tail is most affected by the rotor wake above advance ratios of 0.10. Velocity measurements of the flow on the inlet side of the tail fan were made for a low-speed flight condition using conventional LV techniques. The velocity data show an accelerated flow near the tail fan duct, and vorticity calculations track the passage of main rotor wake vortices through the measurement plane.

Gorton, Susan Althoff↗
NASA NTRS1972

A laser velocimeter for remote wind sensing.

A CW carbon dioxide laser Doppler radar has been developed and applied to remote measurement of atmospheric wind velocity and turbulence. The carbon dioxide laser illuminates residual particulate matter in the atmosphere. Radiation scattered by these particles is homodyned with a local oscillator to provide the Doppler signal. The performance of the instrument is verified by comparison of wind velocity data recorded simultaneously by the laser Doppler system and a cup-anemometer wind-vane system. All data comparisons indicate very close agreement of the two systems. Data inconsistencies are within the accuracy limitations of the conventional anemometer system. The range of the laser Doppler system during these tests was confined to approximately 30 m. Laser Doppler wind velocity data were observed at ranges exceeding 300 m; however, no conventional anemometer was set up at these ranges for data comparisons.

Lawrence, T. R.↗
NASA NTRS1996

Velocity Measurements Near the Empennage of a SmallScale Helicopter Model

A test program was conducted in the NASA Langley 14- by 22-Foot Subsonic Tunnel to measure the flow near the empennage of a small-scale powered helicopter model with an operating tail fan. Three-component velocity profiles were measured with Laser Velocimetry (LV) one chord forward of the horizontal tail for four advance ratios to evaluate the effect of the rotor wake impingement on the horizontal tail angle of attack. These velocity data indicate the horizontal tail can experience unsteady downwash angle variations of over 30 degrees due to the rotor wake influence. The horizontal tail is most affected by the rotor wake above advance ratios of 0.10. Velocity measurements of the flow on the inlet side of the fan were made for a low-speed flight condition using both conventional LV techniques and a promising, non-intrusive, global, three-component velocity measurement technique called Doppler Global Velocimetry (DGV). The velocity data show an accelerated flow near the fan duct, and vorticity calculations track the passage of main rotor wake vortices through the measurement plane. DGV shows promise as an evolving tool for rotor flowfield diagnostics.

Gorton, Susan Althoff↗
NASA NTRS1989

Jupiter's Great Red Spot as a shallow water system

Voyager cloud-top velocity data for Jupiter's Great Red Spot (GRS) is used to derive the bottom topography up to a constant that depends on the unknown radius of deformation. The bottom topography is inferred from the Bernoulli streamfunction, kinetic energy per unit mass, and absolute vorticity values derived from the velocity data. The results are used to calculate potential vorticity versus latitude far from the vortex. It is found that the deep atmosphere is in differential motion and that the far-field potential vorticity gradient changes sign at several latitudes. Numerical experiments are conducted to study the time-dependent behavior of the shallow water analog of Jupiter's analog.

Dowling, Timothy E.↗
NASA NTRS2000

The nu Andromedae System: Models and Stability

Radial velocity observations of the F8 V star nu Andromedae taken at Lick and at Whipple Observatories have revealed evidence of three periodicities in the line-of-sight velocity of the star. These periodicities have been interpreted as evidence for at least three low-mass companions (LMCs) revolving around nu Andromedae. The mass and orbital parameters inferred for these companions raise questions about the dynamical stability of the system. We report here results from our independent analysis of the published radial velocity data, as well as new unpublished data taken at Lick Observatory. Our results confirm the finding of three periods in the data. Our best fits to the data, on the assumption that these periods arise from the gravitational perturbations of companions in Keplerian orbits, are also generally in agreement but with some differences from the earlier findings. We find that the available data do not constrain well the orbital eccentricity of the middle companion in a three-companion model of the data. We also find that in order for our best-fit model to the Lick data to be dynamically stable over the lifetime of the star (approximately 2 billion years), the system must have a mean inclination to the plane of the sky greater than 13 deg. The corresponding minimum inclination for the best fit to the Whipple data set is 19 deg. These values imply that the maximum mass for the outer companion can be no greater than about 20 Jupiter masses. Our analysis of the stability of the putative systems also places constraints on the relative inclinations of the orbital planes of the companions. We comment on global versus local (i.e., method of steepest descent) means of finding best-fit orbits from radial velocity data sets.

Stepinski, Tomasz F.↗
NASA NTRS1989

MU radar observation of a mesospheric gravity wave breaking caused by convective instability

In recent measurements of mesospheric winds with the MU radar at Shigaraki (34.9 N, 136.1 E), Japan, a couple of wind velocity data was obtained showing that a monochromatic inertia-gravity wave was propagating vertically in the mesosphere. The data show that the velocity amplitude of the wave did not increase exponentially above a height and further show that the wave form had broken down at a level. Evaluating the changes of the atmospheric stability in the wave field from the measured wind data and from the estimated wave parameters, the breakdown of the wave was shown to be connected with the occurrence of convective instability in the wave field.

Muraoka, Y.↗
NASA NTRS2002

Evolution of Ionospheric Convection during a Double Transpolar Arc Phenomenon on February 11, 1999

An evolution of ionospheric convection was studied for a double transpolar arc phenomenon on February 11, 1999. While one transpolar arc split from the auroral oval in the morning sector and drifted duskward, another arc appeared in the evening sector. The convection was investigated with three velocity data sets: E B drift velocities from the ASTRID-2 satellite; Ion Driftmeter data from the DMSP satellites; and Doppler-shift data from the Super-DARN radars. We inferred convection cells from these data sets and found that the number of convection cells changed from three to four as the dominance of IMF changed from a negative By to a positive Bz. Our result suggests that the ionospheric convection that has been so far discussed for various conditions of IMF may be applied even to the cases accompanied by transpolar arcs.

Narita, Y.↗
NASA NTRS1990

Investigation of Particle Sampling Bias in the Shear Flow Field Downstream of a Backward Facing Step

The flow field about a backward facing step was investigated to determine the characteristics of particle sampling bias in the various flow phenomena. The investigation used the calculation of the velocity:data rate correlation coefficient as a measure of statistical dependence and thus the degree of velocity bias. While the investigation found negligible dependence within the free stream region, increased dependence was found within the boundary and shear layers. Full classic correction techniques over-compensated the data since the dependence was weak, even in the boundary layer and shear regions. The paper emphasizes the necessity to determine the degree of particle sampling bias for each measurement ensemble and not use generalized assumptions to correct the data. Further, it recommends the calculation of the velocity:data rate correlation coefficient become a standard statistical calculation in the analysis of all laser velocimeter data.

Meyers, James F.↗
NASA NTRS1982

SASS wind ambiguity removal by direct minimization

An objective analysis procedure is presented which combines Seasat-A satellite scatterometer (SASS) data with other available data on wind speeds by minimizing an objective function of gridded wind speed values. The functions are defined as the loss functions for the SASS velocity data, the forecast, the SASS velocity magnitude data, and conventional wind speed data. Only aliases closest to the analysis were included, and a method for improving the first guess while using a minimization technique and slowly changing the parameters of the problem is introduced. The model is employed to predict the wind field for the North Atlantic on Sept. 10, 1978. Dealiased SASS data is compared with available ship readings, showing good agreement between the SASS dealiased winds and the winds measured at the surface. Expansion of the model to take in low-level cloud measurements, pressure data, and convergence and cloud level data correlations is discussed.

Hoffman, R. N.↗
NASA NTRS1982

Solar rotation measurements at Mount Wilson. III - Meridional flow and limbshift

It is shown that the use of a two-parameter limbshift and a meridional flow velocity fits solar velocity data better than the standard analysis defined by Howard et al. (1980). The data used are the coarse residual velocity arrays, with 34 equal intervals in both sine latitude and sine longitude. There are a total of 2899 full-disk observations between January 1, 1967, and December 12, 1980. The original velocity fields are reconstructed by adding into the residual arrays the large-scale patterns that were measured and removed on a daily basis by a standard reduction. Tests of this reconstituded data set show that no significant errors are introduced in the analysis of large-scale velocity fields. The results of the analysis presented here imply that the study of solar velocity pattern at the level of a few m/s requires that magnetic regions be treated separately from nonmagnetic regions.

Labonte, B. J.↗
NASA NTRSDate not supplied

Characterization of Large Drop Velocity in the NASA Icing Research Tunnel

This paper presents experimental work conducted in the Icing Research Tunnel at NASA Glenn Research Center to characterize the velocity of large drops in the test section. Some icing spray clouds with large drops were generated with Mod1 nozzles at low nozzle air pressure of 2 to 4 psig for various tunnel air speeds. Drop diameters and drop velocities were measured via high-resolution imaging with a Particle Imaging Particle Tracking Velocimetry probe developed by Artium Technologies. The probe was mounted at four different locations aligned with the centerline of the test section from near the end of the contraction to the constant height test section part of the tunnel. CFD analyses were performed. It showed that the probe head geometry affects the local air flow in the measurement area of the probe between the prongs and in front of the probe. Initial analysis of the air velocity data during the test also indicated that the probe mounting stand has blockage effect on the local tunnel air velocity measurement by a pitot-static probe affixed on the mounting plate next to the stand. Those findings were later verified in the Icing Research Tunnel using a new pitot-static probe design with a linear motion system to measure the local tunnel air velocity with and without the probe. As a result, additional drop trajectory simulations were performed with the airflow moving towards the probe head with a Langmuir-D 7-bin distribution cloud containing large drops. The simulation results helped identify a critical drop-size threshold of 300 μm above which the velocities of larger drops are negligibly affected by the adverse pressure gradient generated by the probe head due to their large drop inertia. From the dimensional analysis of the drop velocity measurement data obtained, it showed that at the tunnel test section reference location a generalized empirical correlation was developed for the non-dimensional drop velocity as a function of the non-dimensional corrected drop diameter independent of the actual spraybar pressure settings and the tunnel air speeds. The generalized curve-fit correlation showed that the drop velocity was universally asymptotic to about 86 percent of the corresponding tunnel air speed at the test section reference location for the largest drop diameter captured by the probe. Further evaluation of this correlation is recommended to assess its applicability for Supercooled Large Drop icing scaling applications in the Icing Research Tunnel.

SLD↗
NASA NTRSDate not supplied

Characterization of Large Drop Velocity in the NASA Icing Research Tunnel

This presentation presents experimental work conducted in the Icing Research Tunnel at NASA Glenn Research Center to characterize the velocity of large drops in the tunnel test section. Some icing spray clouds with large-sized drops were generated with Mod1 nozzles at low nozzle air pressure of 2 to 4 psig for various tunnel air speeds. Drop diameters and drop velocities were measured via high-resolution imaging with a Particle Imaging Particle Tracking Velocimetry probe developed by Artium Technologies. The probe was mounted at four different locations aligned with the centerline of the test section from near the end of the contraction to the constant height test section part of the tunnel. CFD analyses were performed. It showed that the probe head geometry affects the local air flow between the prongs and in front of the probe. Initial analysis of the air velocity data during the test also indicated that the probe mounting stand has blockage effect on the local tunnel air velocity measurement by a Pitot static probe affixed on the mounting plate. Those findings were later verified in the Icing Research Tunnel using a new Pitot probe design with a linear motion system to measure the local tunnel air velocity with and without the probe. As a result, additional drop trajectory simulations as airflow moving towards the probe head were run for a Langmuir-D 7-bin drop size distribution of a spray cloud with a nominally large value of medium volumetric diameter. The simulation results helped identify a critical drop-size threshold of 300 µm above which the velocities of larger drops are not affected by the adverse pressure gradient generated by the probe head due to their large drop inertia. From the dimensional analysis of the drop velocity measurement data obtained, it showed that at the tunnel test section reference location a generalized empirical correlation was developed for the non-dimensional drop velocity as a function of the non-dimensional corrected drop diameter independent of the actual spraybar pressure settings and the tunnel air speeds. The generalized curve-fit correlation showed that the drop velocity was universally asymptotic to about 86 percent of the corresponding tunnel air speed at the test section reference location for the largest drop diameter captured by the probe. Further evaluation of this correlation is recommended to assess its applicability for Supercooled Large Drop icing scaling applications in the Icing Research Tunnel.

SLD↗
NASA NTRS1973

Wind data for wind driven plant

Simple, averaged wind velocity data provide information on energy availability, facilitate generator site selection and enable appropriate operating ranges to be established for windpowered plants. They also provide a basis for the prediction of extreme wind speeds.

Stodhart, A. H.↗
NASA NTRS1997

Determination of Residual Stress in Composite Materials Using Ultrasonic Waves

The performance of high temperature composites can be significantly affected by the presence of residual stresses. These stresses arise during cooling processes from fabrication to room temperature due to mismatch of thermal expansion coefficients between matrix and fiber materials. This effect is especially pronounced in metal matrix and intermetallic composites. It can lead to plastic deformations, matrix cracking and fiber/matrix interface debonding. In this work the feasibility of ultrasonic techniques for residual stress assessment in composites is addressed. A novel technique for absolute stress determination in orthotropic materials from angular dependencies of ultrasonic velocities is described. The technique is applicable for determination of both applied and residual stresses and does not require calibration measurements on a reference sample. The important advantage of this method is that stress is determined simultaneously with stress-dependent elastic constants and is thus decoupled from the material texture. It is demonstrated that when the principal plane stress directions coincide with acoustical axes, the angular velocity data in the plane perpendicular to the stress plane may be used to determine both stress components. When the stress is off the acoustical axes, the shear and the difference of the normal stress components may be determined from the angular dependence of group velocities in the plane of stresses. Synthetic sets of experimental data corresponding to materials with different anisotropy and stress levels are used to check the applicability of the technique. The method is also verified experimentally. A high precision ultrasonic wave transmission technique is developed to measure angular dependence of ultrasonic velocities. Examples of stress determination from experimental velocity data are given. A method is presented for determination of velocities of ultrasonic waves propagating through the composite material with residual stresses. It is based on the generalized self-consistent multiple scattering model. Calculation results for longitudinal and shear ultrasonic wave velocities propagating perpendicular to the fibers direction in SCS-6/Ti composite with and without residual stresses are presented. They show that velocity changes due to presence of stresses are of order 1%.

Rokhlin, S. I.↗