Search NASA⌕ Search

SEARCH · Search NASA

Results for “wave modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS2009

Assessment of Ocean Wave Model used to Analyze the Constellation Program (CxP) Orion Project Crew Module Water Landing Conditions

Mr. Christopher Johnson, NASA's Systems Manager for the Orion Project Crew Module (CM) Landing and Recovery at the Johnson Space Center (JSC), and Mr. James Corliss, Project Engineer for the Orion CM Landing System Advanced Development Project at the Langley Research Center (LaRC) requested an independent assessment of the wave model that was developed to analyze the CM water landing conditions. A NASA Engineering and Safety Center (NESC) initial evaluation was approved November 20, 2008. Mr. Bryan Smith, NESC Chief Engineer at the NASA Glenn Research Center (GRC), was selected to lead this assessment. The Assessment Plan was presented and approved by the NESC Review Board (NRB) on December 18, 2008. The Assessment Report was presented to the NRB on March 12, 2009. This document is the final Assessment Report.

Smith, Bryan K.↗
DOE OSTI2025

Extending the capillary wave model to include the effect of bending rigidity: X-ray reflectivity and diffuse scattering

The surface roughness of a thin film at a liquid interface exhibits contributions of thermally excited fluctuations. This thermal roughness depends on temperature (𝑇), surface tension (𝛾), and elastic material properties, specifically the bending modulus (𝜅) of the film. A nonzero 𝜅 suppresses the thermal roughness at small length scales compared to an interface with zero 𝜅, as expressed by the power spectral density of the thermal roughness. The description of the x-ray scattering of the standard capillary wave model (CWM), which is valid for zero 𝜅, is extended to include the effect of 𝜅. The extended CWM (eCWM) provides a single analytical form for both the specular x-ray reflectivity (XRR) and the diffuse scattering around the specular reflection, and recovers the expression of the CWM at its zero 𝜅 limit. This theoretical approach enables the use of single-shot grazing incidence x-ray off-specular scattering (GIXOS) measurements for characterizing the structure of thin films on a liquid surface. The eCWM analysis approach decouples the thermal roughness factor from the surface scattering signal, providing direct access to the intrinsic surface-normal structure of the film and its bending modulus. Moreover, the eCWM facilitates the calculation of reflectivity at any desired resolution (pseudo-XRR approach). The transformation into pseudo-XRR provides the benefit of using widely available XRR software to perform GIXOS analysis. The extended range of the vertical scattering vector (𝑄 𝑧 ) available with the GIXOS pseudo-XRR approach allows for a higher spatial resolution than with conventional XRR. Experimental results are presented for various lipid systems, showing strong agreement between conventional specular XRR and pseudo-XRR methods. This agreement validates the proposed approach and highlights its utility for analyzing soft, thin films.

36 MATERIALS SCIENCE↗
NASA NTRS2006

Self-Consistent Ring Current/Electromagnetic Ion Cyclotron Waves Modeling

The self-consistent treatment of the RC ion dynamics and EMIC waves, which are thought to exert important influences on the ion dynamical evolution, is an important missing element in our understanding of the storm-and recovery-time ring current evolution. For example, the EMlC waves cause the RC decay on a time scale of about one hour or less during the main phase of storms. The oblique EMIC waves damp due to Landau resonance with the thermal plasmaspheric electrons, and subsequent transport of the dissipating wave energy into the ionosphere below causes an ionosphere temperature enhancement. Under certain conditions, relativistic electrons, with energies 21 MeV, can be removed from the outer radiation belt by EMIC wave scattering during a magnetic storm. That is why the modeling of EMIC waves is critical and timely issue in magnetospheric physics. This study will generalize the self-consistent theoretical description of RC ions and EMIC waves that has been developed by Khazanov et al. [2002, 2003] and include the heavy ions and propagation effects of EMIC waves in the global dynamic of self-consistent RC - EMIC waves coupling. The results of our newly developed model that will be presented at the meeting, focusing mainly on the dynamic of EMIC waves and comparison of these results with the previous global RC modeling studies devoted to EMIC waves formation. We also discuss RC ion precipitations and wave induced thermal electron fluxes into the ionosphere.

Khazanov, G. V.↗
DOE OSTI2022

3D full wave fast wave modeling with realistic HHFW antenna geometry and SOL plasma in NSTX-U

This paper reports the significant advancement of our ability to model and to understand how RF waves interact with the SOL plasma, by developing for the full torus 3D scrape-off layer (SOL) plasma simulation together with the antenna and core plasma in the NSTX-U device in HHFW frequency regime for a cold plasma model. The present paper extends the previous modeling (Bertelli et al 2020 AIP Conf. Proc. 2254 030001) to a full 3D device geometry including realistic antenna geometry in order to capture a more realistic experimental situation including the fully 3D wave field effects and the antenna plasma interaction in the SOL plasma, and, at the same time, resulting core wave propagation. Here, the central tool of the present work is the Petra-M code, which is a newly developed state-of-the-art generic electromagnetic simulation tool for modeling RF wave propagation based on MFEM (http://mfem.org), an open source scalable C++ finite element method library.

3D RF modeling↗
DOE OSTI2024

Full wave modeling of radio-frequency beams in tokamaks in the electron cyclotron frequency range

Simulation of full wave, without paraxial approximation, high-resolution solution of wave equations in frequency domain in the electron cyclotron resonance (ECR) frequency range for realistic Tokamak plasma parameters became possible by using recently formulated hybrid iterative algorithm [Svidzinski et al., Phys. Plasmas 25, 082509 (2018)] for numerically solving discretized wave equations. This approach combines time evolution and iterative relaxation techniques into iteration cycles. This algorithm is implemented in 2D code FullWave, solving wave equations in Tokamaks in cold and hot plasma models, and it has been tested in 3D full wave iterative RF beams simulation tool, which is presently being developed to model 3D ECRH RF beams in fusion devices using dynamic grid adaptation. The results of 2D full wave modeling, assuming specified toroidal mode number, of ECRH RF beams in DIII-D plasma, performed in the cold and hot plasma models for outboard and top launch scenarios using FullWave are presented. Nonlocal hot plasma response model, based on accurate numerical solution of linearized Vlasov equation, is used to model beam propagation and absorption in the 2nd electron cyclotron harmonic region. Demonstration of capability of the hybrid iterative algorithm to model ECRH RF beams in 3D is made by simulating a substantial part of realistic beam in DIII-D, launched from outboard side of the machine. All relevant physics of RF beam propagation, most of which is not captured in paraxial approximation, such as beam's divergence, interference between the X and O modes in the beam, X-O mode conversion, beam splitting into the X and O mode beams, transformation of beam's cross section, and absorption at the 2nd electron cyclotron harmonic, is captured in the simulations. A numerical technique to find an optimal beam polarization at the launcher to launch a nearly pure X or O mode beam in plasma is developed and tested.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS2007

Effect of EMIC Wave Normal Angle Distribution on Relativistic Electron Scattering Based on the Newly Developed Self-consistent RC/EMIC Waves Model by Khazanov et al. [2006]

It is well known that the effects of EMIC waves on RC ion and RB electron dynamics strongly depend on such particle/wave characteristics as the phase-space distribution function, frequency, wave-normal angle, wave energy, and the form of wave spectral energy density. Therefore, realistic characteristics of EMIC waves should be properly determined by modeling the RC-EMIC waves evolution self-consistently. Such a selfconsistent model progressively has been developing by Khaznnov et al. [2002-2006]. It solves a system of two coupled kinetic equations: one equation describes the RC ion dynamics and another equation describes the energy density evolution of EMIC waves. Using this model, we present the effectiveness of relativistic electron scattering and compare our results with previous work in this area of research.

Khazanov, G. V.↗
NASA NTRS1978

Relativistic blast-wave model for the rapid flux variations of AO 0235+164 and other compact radio sources

A relativistic blast-wave version of a signal-screen model is developed which can adequately explain the details of the flux-density and structural variations of compact extragalactic radio sources. The relativistic motion implied by flux variations is analyzed with respect to the synchrotron spectrum of the BL Lac object AO 0235+164 observed during outbursts, and a signal-screen model for rapidly expanding shells produced by ultrarelativistic blast waves is examined. The approximate observed structure of the blast wave at three stages in its evolution is illustrated, each stage is described, and the model is applied to the flux density outburst in AO 0235+164 observed in late 1975. The results show that a relativistic blast-wave model can in general reproduce the main features of the observed flux variations in compact sources. Some problems with the proposed model are briefly discussed.

Marscher, A. P.↗
DOE OSTI2020

Theory of the Tertiary Instability and the Dimits Shift from Reduced Drift-Wave Models

Tertiary modes in electrostatic drift-wave turbulence are localized near extrema of the zonal velocity U(x) with respect to the radial coordinate x. We argue that these modes can be described as quantum harmonic oscillators with complex frequencies, so their spectrum can be readily calculated. The corresponding growth rate $γ$ TI is derived within the modified Hasegawa-Wakatani model. We show that $γ$TI equals the primary-instability growth rate plus a term that depends on the local U''; hence, the instability threshold is shifted compared to that in homogeneous turbulence. This provides a generic explanation of the well-known yet elusive Dimits shift, which we find explicitly in the Terry-Horton limit. Linearly unstable tertiary modes either saturate due to the evolution of the zonal density or generate radially propagating structures when the shear |U'| is sufficiently weakened by viscosity. The Dimits regime ends when such structures are generated continuously.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1978

Microwave scatter and sea state estimation - Two-scale ocean wave models

The efficient estimation of ocean wave-structure parameters with a remote, narrow-beam, pulsed, microwave radar at intermediate incidence angles is discussed. The sea surface is described as the sum of random small- and large-scale structures (waves), the latter the sum of a sinusoid and a random field. It is shown that the small-scale structure is responsible for scattering and that the scatter depends parametrically on the large-scale structure. For the estimation problem it is assumed, reasonably, that the received signal is normally distributed: a relatively simple processor which will efficiently estimate parameters of the sinusoidal structure is illustrated and its performance discussed. A brief comparison is made with a normal incidence system with which the variance of the large-scale random roughness can be estimated.

Harger, R. O.↗
DOE OSTI2020

3D full wave fast wave modeling with realistic antenna geometry and SOL plasma

This paper reports the significant advancement of our ability to model and to understand how RF waves interact with the SOL plasma, by simulating the full torus 3D SOL plasma together with the antenna and core plasma. We introduce and use a recently developed and open source code, Petra-M, which was constructed on the scalable MFEM C++ finite element library, and performed 3D full wave simulations in the HHFW regime for both NSTX-U and LAPD plasmas. A first full wave simulation for a full 3D torus including a realistic antenna geometry and SOL plasma region for NSTX-U is presented. A scan of the antenna phasing shows a strong interaction between FWs and the SOL plasma for lower antenna phasing, which is consistent with previous NSTX HHFW observations. The effect of the 3D wave field on the fast ion population from NBI beams in NSTX-U is also discussed by using the 3D field obtained from the Petra-M simulations in the full-orbit following particle SPIRAL code. On LAPD, 3D full wave simulations of a new HHFW 4-strap antenna recently installed by TAE Technologies on LAPD are performed showing a qualitative agreement with experimental data.

Bertelli, Nicola↗
NASA NTRS1975

Isothermal blast wave model of supernova remnants

The validity of the 'adiabatic' assumption in supernova-remnant calculations is examined, and the alternative extreme of an isothermal blast wave is explored. It is concluded that, because of thermal conductivity, the large temperature gradients predicted by the adiabatic model probably are not maintained in nature. Self-similar solutions to the hydrodynamic equations for an isothermal blast wave have been found and studied. These solutions are then used to determine the relationship between X-ray observations and inferred parameters of supernova remnants. A comparison of the present results with those for the adiabatic model indicates differences which are less than present observational uncertainties. It is concluded that most parameters of supernova remnants inferred from X-ray measurements are relatively insensitive to the specifics of the blast-wave model.

Solinger, A.↗
NASA NTRS1988

Reynolds stress closure in jet flows using wave models

Ways of implementing the turbulence closure scheme based on modeling the large scale coherent structures as instability waves were sought. The computational tools necessary to apply this scheme to jets of arbitrary geometry were developed. The model, developed earlier, was extended to the shock structure of supersonic jets of arbitrary geometry and multiple jets. It was found that though the qualititate features of the unsteady flow field could be predicted there were always difficulties with some of the quantitative features. This led to the new formation of the closure scheme. The schemes for computations tools which were developed are efficient and represent the application of the very powerful mathematical tools to the problems of practical significance.

Morris, P. J.↗
NASA NTRS1993

A nonreflecting upper boundary condition for anelastic nonhydrostatic mesoscale gravity-wave models

A sponge layer is formulated to prevent spurious reflection of vertically propagating quasi-stationary gravity waves at the upper boundary of a two-dimensional numerical anelastic nonhydrostatic model. The sponge layer includes damping of both Newtonian-cooling type and Rayleigh-friction type, whose coefficients are determined in such a way that the reflectivity of wave energy at the bottom of the layer is zero. Unlike the formulations in earlier studies, our formulation includes the effects of vertical discretization, vertical mean density variation, and nonhydrostaticity. This sponge formulation is found effective in suppressing false downward reflection of waves for various types of quasi-stationary forcing.

Kim, Young-Joon↗
NASA NTRS1973

The critical state - A trapped wave model of vortex breakdown.

A model of vortex breakdown is presented, and its predictions are compared with the experiments of Sarpkaya (1971). The model is centered about a theory of long, weakly nonlinear waves propagating on critical flows in tubes of variable cross section. Although the weakly nonlinear theory must be extended beyond its domain of formal validity, many of the experimentally observed features of vortex breakdown are reproduced by the model. The description of the time evolution of the flowfield that is presented requires numerical calculations that are not simple, but some important conclusions may be determined by easy computations. In particular, the axial position of a breakdown may be found from a very simple equation.

Randall, J. D.↗
NASA NTRS2007

A Shock-Refracted Acoustic Wave Model for Screech Amplitude in Supersonic Jets

A physical model is proposed for the estimation of the screech amplitude in underexpanded supersonic jets. The model is based on the hypothesis that the interaction of a plane acoustic wave with stationary shock waves provides amplification of the transmitted acoustic wave upon traversing the shock. Powell's discrete source model for screech incorporating a stationary array of acoustic monopoles is extended to accommodate variable source strength. The proposed model reveals that the acoustic sources are of increasing strength with downstream distance. It is shown that the screech amplitude increases with the fully expanded jet Mach number. Comparisons of predicted screech amplitude with available test data show satisfactory agreement. The effect of variable source strength on the directivity of the fundamental (first harmonic, lowest frequency mode) and the second harmonic (overtone) is found to be unimportant with regard to the principal lobe (main or major lobe) of considerable relative strength, and is appreciable only in the secondary or minor lobes (of relatively weaker strength).

Kandula, Max↗
NASA NTRS2007

A Shock-Refracted Acoustic Wave Model for the Prediction of Screech Amplitude in Supersonic Jets

A physical model is proposed for the estimation of the screech amplitude in underexpanded supersonic jets. The model is based on the hypothesis that the interaction of a plane acoustic wave with stationary shock waves provides amplification of the transmitted acoustic wave upon traversing the shock. Powell's discrete source model for screech incorporating a stationary array of acoustic monopoles is extended to accommodate variable source strength. The proposed model reveals that the acoustic sources are of increasing strength with downstream distance. It is shown that the screech amplitude increases with the fuiiy expanded jet Mach number. Comparisons of predicted screech amplitude with available test data show satisfactory agreement. The effect of variable source strength on directivity of the fundamental (first harmonic, lowest frequency mode) and the second harmonic (overtone) is found to be unimportant with regard to the principal lobe (main or major lobe) of considerable relative strength, and is appreciable only in the secondary or minor lobes (of relatively weaker strength

Kandula, Max↗