Search NASA⌕ Search

SEARCH · Search NASA

Results for “AMORPHIZATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

Deformation in amorphous–crystalline nanolaminates—an effective-temperature theory and interaction between defects

Experiments and atomic-scale simulations suggest that the transmission of plasticity carriers in deforming amorphous–crystalline nanolaminates is mediated by the biphase interface between the amorphous and crystalline layers. In this study, we present a micromechanics model for these biphase nanolaminates that describes defect interactions through the amorphous–crystalline interface (ACI). The model is based on an effective-temperature framework to achieve a unified description of the slow, configurational atomic rearrangements in both phases when driven out of equilibrium. We show how the second law of thermodynamics constrains the density of defects and the rate of configurational rearrangements, and apply this framework to dislocations in crystalline solids and shear transformation zones (STZs) in amorphous materials. The effective-temperature formulation enables us to interpret the observed movement of dislocations to the ACI and the production of STZs at the interface as a 'diffusion' of configurational disorder across the material. Finally, we demonstrate favorable agreement with experimental findings reported in (Kim et al 2011 Adv. Funct. Mater. 21 4550–4), and demonstrate how the ACI acts as a sink of dislocations and a source of STZs.

36 MATERIALS SCIENCE↗

Relationship between defect density and charge carrier transport in amorphous and microcrystalline silicon

The influence of dangling-bond defects and the position of the Fermi level on the charge carrier transport properties in undoped and phosphorous doped thin-film silicon with structure compositions all the way from highly crystalline to amorphous is investigated. The dangling-bond density is varied reproducibly over several orders of magnitude by electron bombardment and subsequent annealing. The defects are investigated by electron-spin-resonance and photoconductivity spectroscopies. Comparing intrinsic amorphous and microcrystalline silicon, it is found that the relationship between defect density and photoconductivity is different in both undoped materials, while a similar strong influence of the position of the Fermi level on photoconductivity via the charge carrier lifetime is found in the doped materials. The latter allows a quantitative determination of the value of the transport gap energy in microcrystalline silicon. The photoconductivity in intrinsic microcrystalline silicon is, on one hand, considerably less affected by the bombardment but, on the other hand, does not generally recover with annealing of the defects and is independent from the spin density which itself can be annealed back to the as-deposited level. For amorphous silicon and material prepared close to the crystalline growth regime, the results for nonequilibrium transport fit perfectly to a recombination model based on direct capture into neutral dangling bonds over a wide range of defect densities. For the heterogeneous microcrystalline silicon, this model fails completely. The application of photoconductivity spectroscopy in the constant photocurrent mode (CPM) is explored for the entire structure composition range over a wide variation in defect densities. For amorphous silicon previously reported linear correlation between the spin density and the subgap absorption is confirmed for defect densities below 10{sup 18} cm{sup -3}. Beyond this defect level, a sublinear relation is found i.e., not all spin-detected defects are also visible in the CPM spectra. Finally, the evaluation of CPM spectra in defect-rich microcrystalline silicon shows complete absence of any correlation between spin-detected defects and subband gap absorption determined from CPM: a result which casts considerable doubt on the usefulness of this technique for the determination of defect densities in microcrystalline silicon. The result can be related to the inhomogeneous structure of microcrystalline silicon with its consequences on transport and recombination processes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Origin of the second peak in the mechanical loss function of amorphous silica

The thermal noise in amorphous oxides is the limiting factor for gravitational wave detectors and other high-precision optical devices. Through the fluctuation-dissipation theorem, the thermal noise is directly connected to the internal friction ($Q^{–1}$). Computational calculations of $Q^{–1}$ that use a two-level system (TLS) model have previously been performed for several coating materials, facilitating the search for coatings with lower thermal noise. However, they are based on a historical approximation made within the TLS model that treats the TLS distribution as uncorrelated, which has limited the predictive power of the model. In this paper, we show that this approximation limits the physical description of amorphous oxides using the TLS model and a fully correlated distribution must be used to calculate high-temperature behavior. Not only does using a correlated distribution improve the theoretical standing of the TLS model, calculations of $Q^{–1}$ using a fully correlated distribution reproduce and uncover the physical mechanisms of a second peak observed in measurements of ion-beam sputtered amorphous silica. We also explore the details of the thermal activation of TLSs and analyze the atomic transitions that contribute to $Q^{–1}$ in amorphous silica.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural Amorphization-Induced Topological Order

Electronic properties of crystals are inherently pertained to crystalline symmetry, so that amorphization that lowers and breaks symmetry is detrimental. One important crystalline property is electron band topology which is known to be weakened and destroyed by structural disorder. Here, we report a counterintuitive theoretical discovery that atomic structural disorder by amorphization can in fact induce electronic order of topology in an otherwise topologically trivial crystal. The resulting nontrivial topology is characterized by a nonzero spin Bott index, associated with robust topological edge states and quantized conductance. Further, the underlying topological phase transition (TPT) from a trivial crystal to a topological amorphous is analyzed by mapping out a phase diagram in the degree of structural disorder using an effective medium theory. The atomic disorder is revealed to induce topological order by renormalizing the spectral gap toward nontriviality near the phase boundary. As a concrete example, we further show such TPT in amorphous stanane by first-principles calculations. Our findings point to possible observation of an electronic ordering transition accompanied by a structural disorder transition.

36 MATERIALS SCIENCE↗

Ab Initio Simulation of Amorphous Graphite

An amorphous graphite material has been predicted from molecular dynamics simulation using ab initio methods. Carbon materials reveal a strong proclivity to convert into a sp 2 network and then layer at temperatures near 3000 K within a density range of ca. 2.2–2.8 g/cm 3 . Each layer of amorphous graphite is a monolayer of amorphous graphene including pentagons and heptagons in addition to hexagons, and the planes are separated by about 3.1 Å. The layering transition has been studied using various structural and dynamical analyses. The transition is unique as one of partial ordering (long range order of planes and galleries, but topological disorder in the planes). The planes are quite flat, even though monolayer amorphous graphene puckers near pentagonal sites. Interplane cohesion is due partly to non-Van der Waals interactions. The structural disorder has been studied closely, especially the consequences of disorder to electronic transport. Finally, it is expected that the transition elucidated here may be salient to other layered materials.

42 ENGINEERING↗

Magnetism in amorphous carbon

We investigate reported ferromagnetism in a new form of amorphous carbon. We use spin constrained first-principles simulations to obtain amorphous carbon structures with the desired magnetization. Here, we show the existence of sp 2 -like threefold coordinated carbon atoms plays an important role in causing magnetism in amorphous carbon. We predict detailed geometries of threefold carbon atoms that induce the magnetic order in amorphous carbon.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Unexpected dependence of the anomalous Hall angle on the Hall conductivity in amorphous transition metal thin films

The anomalous Hall effect (AHE), and magnetic and electronic transport properties were investigated in a series of amorphous transition metal thin films— Fe x S i –x , Fe x Ge 1-x , Co x Ge 1–x , Co x Si 1–x , and Fe 1–y Co y Si. The experimental results are compared with density functional theory calculations of the density of Berry curvature and intrinsic anomalous Hall conductivity. In all samples, the longitudinal conductivity (σ xx ), magnetization (M), and Hall resistivity (ρ xy ) increase with increasing transition metal concentration; due to the structural disorder σ xx is lower in all samples than a typical crystalline metal. In the systems with Fe as the transition metal (including Fe 1–y Co y Si), the magnetization and AHE are large and in some cases greater than the crystalline analog. In all samples, the AHE is dominated by the intrinsic mechanism, arising from a nonzero, locally derived Berry curvature. The anomalous Hall angle (AHA) (= σ xy /σ xx ) is as large as 5% at low temperature. These results are compared with the AHAs reported in a broad range of crystalline and amorphous materials. Previous work has shown that in a typical crystalline ferromagnet the Hall conductivity (σ xy ) and σ xx are correlated and are usually either both large or both small, resulting in an AHA that decreases with increasing σ xy . By contrast, the AHA increases linearly with increasing σ xy in the amorphous systems. This trend is attributed to a generally low σ xx , while σ xy varies and can be large. In the amorphous systems, σ xx and σ xy are not coupled, and there may thus exist the potential to further increase the AHA by increasing σ xy .

36 MATERIALS SCIENCE↗

Thermally activated diffusion of copper into amorphous carbon

Using x-ray photoelectron spectroscopy, the authors characterize the thermally activated changes that occur when Cu is deposited on amorphous carbon supported on Si at 300 K, then heated to 800 K. The authors compare data for Cu on the basal plane of graphite with pinning defects, where scanning tunneling microscopy reveals that coarsening is the main process in this temperature range. Coarsening begins at 500–600 K and causes moderate attenuation of the Cu photoelectron signal. For Cu on amorphous carbon, heating to 800 K causes Cu to diffuse into the bulk of the film, based on the strong attenuation of the Cu signal. Diffusion into the bulk of the amorphous carbon film is confirmed by changes in the shape of the Cu 2 p inelastic tail, and by comparison of attenuation between Cu 2 p and Cu 3 p lines. The magnitude of the photoelectron signal attenuation is compatible with Cu distributed homogeneously throughout the amorphous carbon film, and is not compatible with Cu at or below the C–Si interface under the conditions of our experiments. As a result, desorption is not significant at temperatures up to 800 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hydrogen solubility in amorphous Mg{sub 0.6}SiO{sub 2.6} at high pressure

The solubility of hydrogen in amorphous Mg{sub 0.6}SiO{sub 2.6} at a temperature of 250°C and pressures up to 75 kbar is studied using a quenching technique. The molar ratio H{sub 2}/formula unit is found to nonlinearly increase with pressure from x = 0.12 at P = 10 kbar to x = 0.303 at P = 75 kbar. An investigation of the quenched samples by Raman spectroscopy demonstrated that hydrogen dissolves in amorphous Mg{sub 0.6}SiO{sub 2.6} in the form of H{sub 2} molecules. X-ray diffraction and Raman studies showed that the hydrogenation of the samples is likely to be accompanied by a phase transition in the amorphous lattice of Mg{sub 0.6}SiO{sub 2.6} at P ≈ 52.5 kbar to a denser amorphous modification.

36 MATERIALS SCIENCE↗

Amorphous Films of Ternary Zinc and Tin Oxides for Transparent Electronics

Amorphous films of two varieties of zinc stannate (ZnSnO{sub 3} and Zn{sub 2}SnO{sub 4}) have been considered that were fabricated by radio-frequency sputtering of ceramic compound targets containing ZnO and SnO{sub 2} in 1: 1 and 2: 1 ratios. The elemental and phase compositions of the films and their optical and electrical parameters were determined. The transparency of the films in the visible spectral range is on average 87%. Zinc stannate amorphous films have a high electrical conductivity in contrast to amorphous ZnO and SnO{sub 2}. This phenomenon, which makes it possible to use zinc stannate amorphous films in transparent and flexible electronics, is explained.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ab Initio Insights to Metal Passivation: Diffusion and Defect Formation in Amorphous Zirconia and Alumina

Metal passivation refers to the formation of protective oxide films on metals, which shield them from further corrosion and oxidation, playing a crucial role in maintaining their stability. The mesoscopic Point Defect Model has successfully predicted passivity as a steady state process where oxide growth from oxygen vacancies at the metal/film interface competes with oxide dissolution at the film/environment interface. In this work, informed by the Point Defect Model parameters, we use first-principles calculations to calculate defect formation and atomic diffusion in amorphous materials and correlate these descriptors with the behavior and growth of the oxide film. Focusing on amorphous zirconia and alumina, we demonstrate that defect formation energies exhibit significant variability in amorphous systems. In alumina, vacancies dominate, with cation and anion vacancies occurring at comparable concentrations. Diffusion calculations for stoichiometric amorphous alumina and zirconia, as well as oxygen-deficient zirconia, reveal faster diffusion in the oxygen-deficient case, highlighting the impact of defects on transport. Comparison of calculated self-diffusion coefficients for the dominant defect species with experimentally measured oxide thicknesses shows a clear correlation, suggesting that first-principles-derived diffusivity information can serve as a key descriptor for surface passivation film growth.

Farnell, Mackinzie S. [University of California, B↗

Fast Li-Ion Transport in Amorphous Li 2 Si 2 O 5 : An Ab Initio Molecular Dynamics Simulation

The present study reports an ab-initio molecular dynamics (AIMD) simulation of ionic diffusion in the amorphous Li 2 Si 2 O 5 in a temperature range of 573–823 K. The results show that the amorphous Li 2 Si 2 O 5 is primarily a Li + conductor with negligible O 2- and Si 4+ contributions. The obtained activation energy of 0.47 eV for Li + diffusion is higher than Na + in the analogue amorphous Na 2 Si 2 O 5 , but close to other types of Li + conductors. The predicted Li + conductivity is on the order of 10 -2 S·cm -1 at 623–823 K. Our simulations also reveal that Li + in the amorphous Li 2 Si 2 O 5 diffuses via a hopping mechanism between the nearest sites in the channels formed by two adjacent SiO 4 layers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Low temperature amorphization and superconductivity in FeSe single crystals at high pressures

In this study, we report low temperature x-ray diffraction studies combined with electrical resistance measurements on single crystals of iron-based layered superconductor FeSe to a temperature of 10 K and a pressure of 44 GPa. The low temperature high pressure x-ray diffraction studies were performed using a synchrotron source and superconductivity at high pressure was studied using designer diamond anvils. At ambient temperature, the FeSe sample shows a phase transformation from a PbO-type tetragonal phase to a NiAs-type hexagonal phase at 10 {+-} 2 GPa. On cooling, a structural distortion from a PbO-type tetragonal phase to an orthorhombic Cmma phase is observed below 100 K. At a low temperature of 10 K, compression of the orthorhombic Cmma phase results in a gradual transformation to an amorphous phase above 15 GPa. The transformation to the amorphous phase is completed by 40 GPa at 10 K. A loss of superconductivity is observed in the amorphous phase and a dramatic change in the temperature behavior of electrical resistance indicates formation of a semiconducting state at high pressures and low temperatures. The formation of the amorphous phase is attributed to a kinetic hindrance to the growth of a hexagonal NiAs phase under high pressures and low temperatures.

43 PARTICLE ACCELERATORS↗

The ab initio amorphous materials database: Empowering machine learning to decode diffusivity

Amorphous materials exhibit unique properties that make them suitable for various applications in science and technology, ranging from optical and electronic devices and solid-state batteries to protective coatings. However, data-driven ex- ploration and design of amorphous materials is hampered by the absence of a com- prehensive database covering a broad chemical space. In this work, we present the largest computed amorphous materials database to date, generated from sys- tematic and accurate ab initio molecular dynamics (AIMD) calculations. We also show how the database can be used in simple machine-learning models to connect properties to composition and structure, here specifically targeting ionic conductiv- ity. These models predict the Li-ion diffusivity with speed and accuracy, offering a cost-effective alternative to expensive density functional theory (DFT) calculations. Furthermore, the process of computational quenching amorphous materials provides a unique sampling of out-of-equilibrium structures, energies, and force landscape, and we anticipate that the corresponding trajectories will inform future work in uni- versal machine learning potentials, impacting design beyond that of non-crystalline materials.

36 MATERIALS SCIENCE↗

Sound speed and refractive index of amorphous CaSiO3 upon pressure cycling to 40 GPa

Abstract Brillouin spectroscopy at room temperature and pressures up to 40 GPa documents nearly identical elasticity and refractive index of amorphous CaSiO3 created by two different methods: temperature-quenching the melt at ambient pressure and pressure-amorphizing crystalline wollastonite at room temperature. We find reproducible hysteresis of 0 to 8% on pressure cycling that is small relative to the 30 to 60% changes in shear and longitudinal wave velocities over this pressure range. Together with observed changes in refractive index and previous results from Raman spectroscopy, these measurements reveal a continuous and reversible change in atomic packing induced by pressure. Unlike many other silicate glasses, amorphous CaSiO3 exhibits highly reproducible properties, behaving smoothly and reversibly under pressure cycling and possessing similar structure and elasticity regardless of synthesis paths for the starting material, which suggests that the amorphous solid may mimic the liquid over the pressure range investigated.

Geochemistry & Geophysics↗

Modeling the Coupled Chemo-Thermo-Mechanical Behavior of Amorphous Polymer Networks.

Amorphous polymers exhibit a rich landscape of time-dependent behavior including viscoelasticity, structural relaxation, and viscoplasticity. These time-dependent mechanisms can be exploited to achieve shape-memory behavior, which allows the material to store a programmed deformed shape indefinitely and to recover entirely the undeformed shape in response to specific environmental stimulus. The shape-memory performance of amorphous polymers depends on the coordination of multiple physical mechanisms, and considerable opportunities exist to tailor the polymer structure and shape-memory programming procedure to achieve the desired performance. The goal of this project was to use a combination of theoretical, numerical and experimental methods to investigate the effect of shape memory programming, thermo-mechanical properties, and physical and environmental aging on the shape memory performance. Physical and environmental aging occurs during storage and through exposure to solvents, such as water, and can significantly alter the viscoelastic behavior and shape memory behavior of amorphous polymers. This project – executed primarily by Professor Thao Nguyen and Graduate Student Rui Xiao at Johns Hopkins University in support of a DOE/NNSA Presidential Early Career Award in Science and Engineering (PECASE) – developed a theoretical framework for chemothermo- mechanical behavior of amorphous polymers to model the effects of physical aging and solvent-induced environmental factors on their thermoviscoelastic behavior.

36 MATERIALS SCIENCE↗

Understanding the Structure of Amorphous Thin Film Hafnia (Final Paper)

Hafnium Oxide (HfO 2 ) amorphous thin films are being used as gate oxides in transistors because of their high dielectric constant (κ) over Silicon Dioxide. The present study looks to find the atomic structure of HfO 2 thin films which hasn’t been done with the technique of this study. In this study, two HfO 2 samples were studied. One sample was made with thermal atomic layer deposition (ALD) on top of a Chromium and Gold layer on a silicon wafer. The second sample was made with plasma ALD on top of a Chromium and Gold layer on a Silicon wafer. Both films were deposited at a thickness of 50nm. To obtain atomic structure information, Grazing Incidence X-ray diffraction (GIXRD) was carried out on the HfO 2 samples. Because of this, absorption, footprint, polarization, and dead time corrections were applied to the scattering intensity data collected. The scattering curves displayed a difference in structure between the ALD processes. The plasma ALD sample showed the broad peak characteristic of an amorphous structure whereas the thermal ALD sample showed an amorphous structure with characteristics of crystalline materials. This appears to suggest that the thermal process results in a mostly amorphous material with crystallites within. Further, the scattering intensity data was used to calculate a pair distribution function (PDF) to show more atomic structure. The PDF showed atom distances in the plasma ALD sample had structure up to 10 Å, while the thermal ALD sample showed the same structure below 10 Å. This structure that shows up below 10 Å matches the bond distances of HfO 2 published in literature. The PDF for the thermal ALD sample also showed peaks up to 20 Å, suggesting repeating atomic spacing outside the HfO 2 molecule in the sample. This appears to suggest that there is some crystalline structure within the thermal ALD sample.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Additive manufacturing of amorphous metal soft magnetic composites

Soft magnet alloys are used as magnetic cores for electric motors, transformers, wind turbines and other power generation systems. Soft magnetic cores are expensive and time consuming to manufacture in the complex shapes required for next-generation devices using conventional press and sinter powder metallurgy. The objective of this effort is to additively manufacture high performance soft magnets, with reduced cost and reduced material waste and 10x lower energy (core) loss at the high operating frequencies of many electric machines. Laser powder bed fusion additive manufacturing is used as the fabrication method. Electrical steel and amorphous alloys atomized powders are used as a feedstock materials. Magnetic cores are printed in topology optimized structures such as the Hilbert curve because this has been shown to reduce energy losses by minimizing the eddy currents that circulate within the magnet at high frequencies. In our project, we succeed in printing FeSi 3.5wt% and FeSi 6.5wt% electrical steels, and iron-based soft magnetic amorphous alloys in the shape of Hilbert and Peano curve topology optimized structures. We found that the Peano curve has a higher cut-off frequency than the Hilbert curve, and that amorphous alloys have high cut-off frequencies and higher mechanical hardness than electrical steels. Processing conditions such as laser power, scan speed, and hatching pattern were optimized to achieve high density prints, and optimize magnetic performance. We find that the printing of amorphous alloy soft magnetic cores may be technoeconomically feasible for large scale applications such as transformers, for which supply chain issues and the labor costs of manual fabrication of magnetic cores is prohibitive in some cases.

36 MATERIALS SCIENCE↗