Search NASA⌕ Search

SEARCH · Search NASA

Results for “Alignment”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
DOE OSTI2011

Linear diffraction grating interferometer with high alignment tolerance and high accuracy

We present an innovative structure of a linear diffraction grating interferometer as a long stroke and nanometer resolution displacement sensor for any linear stage. The principle of this diffractive interferometer is based on the phase information encoded by the {+-}1st order beams diffracted by a holographic grating. Properly interfering these two beams leads to modulation similar to a Doppler frequency shift that can be translated to displacement measurements via phase decoding. A self-compensation structure is developed to improve the alignment tolerance. LightTool analysis shows that this new structure is completely immune to alignment errors of offset, standoff, yaw, and roll. The tolerance of the pitch is also acceptable for most installation conditions. In order to compact the structure and improve the signal quality, a new optical bonding technology by mechanical fixture is presented so that the miniature optics can be permanently bonded together without an air gap in between. For the output waveform signals, a software module is developed for fast real-time pulse counting and phase subdivision. A laser interferometer HP5529A is employed to test the repeatability of the whole system. Experimental data show that within 15 mm travel length, the repeatability is within 15 nm.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2011

Ultra-high-precision alignment of the elastomerically mounted elements of the science camera lenses for the Mars Science Laboratory (MSL) rover

Cameras built for space exploration are required to meet stringent environmental conditions, such as thermal and dynamic loads for both the optics (camera lens) and imaging electronics. On a multitude of spaceborne imaging instruments, optical elements are supported in their mounts via an elastomeric bonding approach using a room temperature vulcanizing silicone as the bonding agent. Employing this integration method, we achieved element-to-element alignment, measured as the total indicated runout, using a high-precision contact probe to be on the order of half a wavelength of He-Ne laser light, or 0.3 {mu}m, on the Malin Space Science Systems lenses for the Mars Science Laboratory (MSL) cameras. This is a higher precision than the current industry state-of-the-art, and it was achieved for the very challenging small diameter lens elements. This paper describes the design philosophy, implementation, and integration method that resulted in achieving this level of precision for interelement alignment. The results are based on actual measurements that were made during the process of building the MSL rover's science camera lenses, namely Mastcams, the Mars Hand Lens Imager, and the Mars Descent Imager. The optical designs of these cameras lenses are described in detail in [Opt. Eng.48, 103002 (2009)10.1117/1.3251343], while further information on the four science cameras can be found at http://www.msss.com.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2013

An Integrated Support and Alignment System for Large ILC Lattice Elements

The manipulators used to support and position lattice elements are critical components of all particle accelerators. The increased use of large superconducting magnets and accelerator modules places even greater demands on these manipulators. However, the performance of these support systems has not kept pace with the advances made in other areas of accelerator technology. This results in accelerators that are difficult to align and may not be capable of achieving target luminosities. An innovative new type of positioning mechanism tailored to the requirements of the International Linear Collider is proposed. The Tri-Sphere System provides secure support for large lattice elements and precision adjustment in six degrees of freedom. Integrated target sockets allow the support system to be rapidly pre-aligned. The system's kinematic design passively guides lattice elements into their correct location during installation. A complimentary Portable Actuation Unit provides the advantages of automated adjustment and allows these adjustments to be completely decoupled from surveying.

43 PARTICLE ACCELERATORS↗
DOE OSTI2012

High Performance PrFeB Permanent Magnets through Novel Pulse Alignment and Compaction Method for Cryogenic Permanent Magnet Undulators (CPMU)

The Phase I feasibility results of processing PrFeB magnets have shown highly promising magnetic property results with the potential to equal or exceed the best PrFeB properties reported. These findings will be advanced in Phase II through composition tuning, optimization of powder alignment from 95% to > 98%, sintering and heat treat adjustments. The objectives of Phase I were successfully achieved during Phase I work. These were to produce PrFeB magnets and test to establish a baseline process including material chemistry, alloy milling to 3 microns, compaction with domain alignment, and liquid Phase sintering and annealing – under both thermal and vacuum cycles. Success of proper chemistry and processing is determined by the finished magnet density and magnetic performance. A density of 7.45 +/-0.03 g/cm3 has been established as demonstrating full density.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Contactless Position Measurement System for Remote Alignment of Highly Reflective Objects

The Contactless Position Measurement System (CPMS) permits automatic alignment of highly-reflecting components that cannot or should not be touched by human hands, such as those used in SRF cavities. CPMS also has application during maintenance of fusion reactors, when the components in the reactor are radioactive. The length of time for which humans can handle the components in order to carry out maintenance or repairs is limited. We would like to measure the relative positions of such objects so we can bring them into alignment with motorized stages, thus eliminating the need for human contact. The CPMS is a computer vision system that measures the location of highly reflective components to within a fraction of a millimeter by finding the edges of silhouette images. This is done by placing a uniform, infrared backlight behind the components, and viewing each component with two low-aberration, infrared cameras. Each of these stereoscopic cameras are located within a coordinate system we set up with reference platforms, light sources, and survey cameras distributed around the perimeter of the string assembly room, or fusion reactor. We obtain stereoscopic silhouette images of each component, and we use these to determine the position of the component within our string assembly coordinate system. The CPMS combines the silhouette images with knowledge of the dimensions of the objects to obtain the relative positions of components in its field of view. These position measurements then allow us to mechanically maneuver the components into contact. Once we know where they are, we can move the components to where they are supposed to be with motorized stages or other mechanical means, check they are in the right place, and bolt them together. In Phase I, we built a prototype infrared backlights and cameras, tested it, wrote an analysis program to fit the images. At a range of 50 cm, we are able to measure the relative positions of two stainless steel flanges with an accuracy of 150 μm rms. The next steps are to test the analysis program with motorized stages, build a full-size prototype, and implement it in an cleanroom with SRF cavity assembly. This can be done in a cost effective way given the materials with which the system is designed. As Open Source Instruments achieved more in Phase I than anticipated, despite not receiving a Phase II SBIR grant, we hope to move forward with product development and sales with a testing partner.

43 PARTICLE ACCELERATORS↗
DOE OSTI2024

An Empirical Model For Intrinsic Alignments: Insights From Cosmological Simulations

We extend current models of the halo occupation distribution (HOD) to include a flexible, empirical framework for the forward modeling of the intrinsic alignment (IA) of galaxies. A primary goal of this work is to produce mock galaxy catalogs for the purpose of validating existing models and methods for the mitigation of IA in weak lensing measurements. This technique can also be used to produce new, simulation-based predictions for IA and galaxy clustering. Our model is probabilistically formulated, and rests upon the assumption that the orientations of galaxies exhibit a correlation with their host dark matter (sub)halo orientation or with their position within the halo. We examine the necessary components and phenomenology of such a model by considering the alignments between (sub)halos in a cosmological dark matter only simulation. We then validate this model for a realistic galaxy population in a set of simulations in the Illustris-TNG suite. We create an HOD mock with Illustris-like correlations using our method, constraining the associated IA model parameters, with the $\mathcal{X}$$^{2}_{dof}$ between our model’s correlations and those of Illustris matching as closely as 1.4 and 1.1 for orientation–position and orientation–orientation correlation functions, respectively. By modeling the misalignment between galaxies and their host halo, we show that the 3-dimensional two-point position and orientation correlation functions of simulated (sub)halos and galaxies can be accurately reproduced from quasi-linear scales down to 0.1 $\mathcal{h}$ –1 Mpc. We also find evidence for environmental influence on IA within a halo. Our publicly-available software provides a key component enabling efficient determination of Bayesian posteriors on IA model parameters using observational measurements of galaxy-orientation correlation functions in the highly nonlinear regime.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Optimal intrinsic alignment estimators in the presence of redshift-space distortions

We present estimators for quantifying intrinsic alignments in large spectroscopic surveys that efficiently capture line-of-sight (LOS) information while being relatively insensitive to redshift-space distortions (RSD). We demonstrate that changing the LOS integration range, pimax, as a function of transverse separation outperforms the conventional choice of a single pimax value. This is further improved by replacing the flat pimax cut with a LOS weighting based on shape projection and RSD. Although these estimators incorporate additional LOS information, they are projected correlations that exhibit signal-to-noise ratios comparable to 3D correlation functions, such as the IA quadrupole. Using simulations from Abacus Summit, we evaluate these estimators and provide recommended pimax values and weights for projected separations of 1 - 100 Mpc/h. These will improve measurements of intrinsic alignments in large cosmological surveys and the constraints they provide for both weak lensing and direct cosmological applications.

cosmology↗
DOE OSTI2023

Effects of HAT-CN Layer Thickness on Molecular Orientation and Energy-Level Alignment with ZnPc

Efficient energy-level alignment is crucial for achieving high performance in organic electronic devices. Because the electronic structure of an organic semiconductor is significantly influenced by its molecular orientation, comprehensively understanding the molecular orientation and electronic structure of the organic layer is essential. In this study, we investigated the interface between a 1,4,5,8,9,11-hexaazatriphenylene hexacarbonitrile (HAT-CN) hole injection layer and a zinc-phthalocyanine (ZnPc) p-type organic semiconductor. To determine the energy-level alignment and molecular orientation, we conducted in situ ultraviolet and X-ray photoelectron spectroscopies, as well as angle-resolved X-ray absorption spectroscopy. We found that the HAT-CN molecules were oriented relatively face-on (40°) in the thin (5 nm) layer, whereas they were oriented relatively edge-on (62°) in the thick (100 nm) layer. By contrast, ZnPc orientation was not significantly altered by the underlying HAT-CN orientation. The highest occupied molecular orbital (HOMO) level of ZnPc was closer to the Fermi level on the 100 nm thick HAT-CN layer than on the 5 nm thick HAT-CN layer because of the higher work function. Consequently, a considerably low energy gap between the lowest unoccupied molecular orbital level of HAT-CN and the HOMO level of ZnPc was formed in the 100 nm thick HAT-CN case. This may improve the hole injection ability of the anode system, which can be utilized in various electronic devices.

42 ENGINEERING↗
DOE OSTI2016

Spin–orbit alignment of exoplanet systems: Ensemble analysis using asteroseismology

The angle ψ between a planet's orbital axis and the spin axis of its parent star is an important diagnostic of planet formation, migration, and tidal evolution. We seek empirical constraints on ψ by measuring the stellar inclination is via asteroseismology for an ensemble of 25 solar-type hosts observed with NASA's Kepler satellite. Our results for is are consistent with alignment at the 2σ level for all stars in the sample, meaning that the system surrounding the red-giant star Kepler-56 remains as the only unambiguous misaligned multiple-planet system detected to date. The availability of a measurement of the projected spin–orbit angle λ for two of the systems allows us to estimate ψ. We find that the orbit of the hot Jupiter HAT-P-7b is likely to be retrograde, whereas that of Kepler-25c seems to be well aligned with the stellar spin axis. hile the latter result is in apparent contradiction with a statement made previously in the literature that the multi-transiting system Kepler-25 is misaligned, we show that the results are consistent, given the large associated uncertainties. Finally, we perform a hierarchical Bayesian analysis based on the asteroseismic sample in order to recover the underlying distribution of ψ. The ensemble analysis suggests that the directions of the stellar spin and planetary orbital axes are correlated, as conveyed by a tendency of the host stars to display large values of inclination.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2011

CP Violation in D0-D0bar Mixing and Electric Dipole Moments in SUSY Alignment Models

We report on a study of CP Violation in D{sup 0}-{bar D}{sup 0} mixing and Electric Dipole Moments in the framework of supersymmetric alignment models. Both classes of observables are strongly suppressed in the Standard Model and highly sensitive to new sources of flavor and CP violation that can be present in models of New Physics. Supersymmetric alignment models generically predict large non-standard effects in D{sup 0}-{bar D}{sup 0} mixing and we show that visible CP violation in D{sup 0}-{bar D}{sup 0} mixing implies lower bounds for the EDMs of hadronic systems, like the neutron EDM and the mercury EDM, in the reach of future experimental sensitivities. We also give updated constraints on the mass insertions of the Minimal Supersymmetric Standard Model using the current data on D{sup 0}-{bar D}{sup 0} mixing.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2011

Reconstruction of the Electron Density of Molecules with Single-Axis Alignment

Diffraction from the individual molecules of a molecular beam, aligned parallel to a single axis by a strong electric field or other means, has been proposed as a means of structure determination of individual molecules. As in fiber diffraction, all the information extractable is contained in a diffraction pattern from incidence of the diffracting beam normal to the molecular alignment axis. We present two methods of structure solution for this case. One is based on the iterative projection algorithms for phase retrieval applied to the coefficients of the cylindrical harmonic expansion of the molecular electron density. Another is the holographic approach utilizing presence of the strongly scattering reference atom for a specific molecule.

42 ENGINEERING↗
DOE OSTI2011

Survey and Alignment of SLAC's B Factory

The survey and alignment of SLAC's B-factory injector and high energy ring will be complete in March 1997. Modern digital electronic surveying tools are contributing to new, efficient alignment procedures. A laser tracker was used to fiducialize almost 300 quadrupole magnets. Digital levels were used to pre-set base plate elevations. Theodolites with very accurate co-axial distance meters were used for everything from layout to 3D magnet positioning to network surveys, all in free stationing mode. A number of procedures and measurement results are outlined.

43 PARTICLE ACCELERATORS↗
DOE OSTI2014

The Dependence of the Strength and Thickness of Field-Aligned Currents on Solar Wind and Ionospheric Parameters

Sheared plasma flows at the low-latitude boundary layer correlate well with early afternoon auroral arcs and eld-aligned currents [Sonnerup, 1980; Lundin and Evans, 1985]. We present a simple analytic model that relates solar wind and ionospheric parameters to the strength and thickness of field-aligned currents in a region of sheared velocity, such as the low latitude boundary layer. We compare the predictions of the model with DMSP observations and nd remarkably good scaling of the currents with solar wind and ionospheric parameters. The sheared boundary layer thickness is inferred to be around 3000km consistent with observational studies. The analytic model provides a simple way to organize data and to infer boundary layer structures from ionospheric data.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2015

The dependence of the strength and thickness of field‐aligned currents on solar wind and ionospheric parameters

Abstract Sheared plasma flows at the low‐latitude boundary layer (LLBL) correlate well with early afternoon auroral arcs and upward field‐aligned currents. We present a simple analytic model that relates solar wind and ionospheric parameters to the strength and thickness of field‐aligned currents (Λ) in a region of sheared velocity, such as the LLBL. We compare the predictions of the model with DMSP observations and find remarkably good scaling of the upward region 1 currents with solar wind and ionospheric parameters in region located at the boundary layer or open field lines at 1100–1700 magnetic local time. We demonstrate that and Λ ∼ L when Λ/ L < 5 where L is the auroral electrostatic scale length. The sheared boundary layer thickness (Δ m ) is inferred to be around 3000 km, which appears to have weak dependence on V sw . J ∥ has dependencies on Δ m , Σ p , n sw , and V sw . The analytic model provides a simple way to organize data and to infer boundary layer structures from ionospheric data.

Johnson, Jay R.↗
DOE OSTI2015

Theory and observations of upward field‐aligned currents at the magnetopause boundary layer

Abstract The dependence of the upward field‐aligned current density ( J || ) at the dayside magnetopause boundary layer is well described by a simple analytic model based on a velocity shear generator. A previous observational survey confirmed that the scaling properties predicted by the analytical model are applicable between 11 and 17 MLT. We utilize the analytic model to predict field‐aligned currents using solar wind and ionospheric parameters and compare with direct observations. The calculated and observed parallel currents are in excellent agreement, suggesting that the model may be useful to infer boundary layer structures. However, near noon, where velocity shear is small, the kinetic pressure gradients and thermal currents, which are not included in the model, could make a small but significant contribution to J || . Excluding data from noon, our least squares fit returns log( J ||,max_cal ) = (0.96 ± 0.04) log( J ||_obs ) + (0.03 ± 0.01) where J ||,max_cal = calculated J ||,max and J ||_obs = observed J || .

Wing, Simon↗
DOE OSTI2018

Aligned van der Waals Coupled Growth of Carbon Nanotubes to Hexagonal Boron Nitride

Abstract 1D carbon nanotubes (CNTs) are grown on hexagonal boron nitride (hBN) surfaces. The nanotubes show clear preference to align to specific crystal directions of the hBN substrate. Raman spectra confirm that the nanotubes consist of sp 2 carbon, while nanomanipulation shows that they are van der Waals coupled to the underlying hBN substrate. Scanning conductance and electric force microscopy show that the CNTs have significantly greater electrical conductance compared to the hBN. This integrated aligned growth of materials with similar lattices, yet having dissimilar dimensionality and electrical conducting properties, provides a promising route to achieving intricate nanoscale electrical circuits on high‐quality insulating substrates.

Nasseri, Mohsen↗
DOE OSTI2023

Tunable Magnetic and Optical Anisotropy in ZrO 2 ‐Co Vertically Aligned Nanocomposites

Abstract Metamaterials have gained great research interest in recent years owing to their potential for property tunability, multifunctionality, and property coupling. As a new group of self‐assembled thin films, vertically aligned nanocomposite (VAN)‐based hybrid metamaterials have been demonstrated with significant anisotropic physical properties and a broad range of property tailorability, such as optical anisotropy, magnetic anisotropy, hyperbolic dispersion, and enhanced second harmonic generation properties. Herein, self‐assembled ZrO 2 ‐Co nanocomposite films, with high epitaxial quality and ultra‐fine vertically aligned Co nanopillars (with an average diameter of ≈2 nm) embedded in a ZrO 2 matrix, are fabricated using a pulsed laser deposition (PLD) method. The Co pillar density can be effectively tuned by varying the Co concentration in the target, which results in tunable optical properties and magnetic properties. Specifically, a high saturation magnetization of 100 emu cm −3 , strong out‐of‐plane magnetic anisotropy and tailorable magnetization properties are achieved via tuning the Co nanopillar density. Coupled with hyperbolic dispersion of dielectric constant from 950 to 1500 nm in wavelength, plasmonic Co metal nanopillars, and the unique dielectric ZrO 2 matrix, this new nanoscale hybrid metamaterial shows great potential for future integrated optical and magnetic device designs.

36 MATERIALS SCIENCE↗