Search NASA⌕ Search

SEARCH · Search NASA

Results for “Base Composition”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

Screening of metal matrix composites using ultrasonic C-scans

Ultrasonic C-scans can be used to find some types of defects in continuous fiber-reinforced metal matrix composites such as boron/aluminum composites. These defects are related to the fatigue behavior and fracture location of each inspected specimen. The C-scan technique determined the relative amount of defects in boron/aluminum composites. The defects were primarily identified as gaps in the fiber spacing. Those specimens with higher defect densities had shorter fatigue lives, lower fatigue endurance limits, and greater reductions in the elastic unloading modulus (that is, stiffness) because of fatigue cycling. This type of data could be used to set accept/reject levels for a composite panel based on C-scan indications.

Johnson, W. S.↗
NASA NTRS1989

A class of parallel algorithms for computation of the manipulator inertia matrix

Parallel and parallel/pipeline algorithms for computation of the manipulator inertia matrix are presented. An algorithm based on composite rigid-body spatial inertia method, which provides better features for parallelization, is used for the computation of the inertia matrix. Two parallel algorithms are developed which achieve the time lower bound in computation. Also described is the mapping of these algorithms with topological variation on a two-dimensional processor array, with nearest-neighbor connection, and with cardinality variation on a linear processor array. An efficient parallel/pipeline algorithm for the linear array was also developed, but at significantly higher efficiency.

Fijany, Amir↗
NASA NTRS1990

Angle-Ply Weaving

Bias-direction or angle-ply weaving is proposed new process for weaving fibers along bias in conventional planar fabric or in complicated three-dimensional multilayer fabric preform of fiber-reinforced composite structure. Based upon movement of racks of needles and corresponding angle yarns across fabric as fabric being formed. Fibers woven along bias increases shear stiffness and shear strength of preform, increasing value of preform as structural member.

Farley, Gary L.↗
NASA NTRS1989

UV Observations of NGC 205

Low resolution IUE observations of the dwarf elliptical galaxy NGC 205 show that the UV spectral energy distribution (SED) of the galaxy is relatively flat. Spectra centered on the nucleus and on a region north of the nucleus show evidence of recent bursts of star formation which contribute strongly to the UV spectral energy distribution. The UV spectra was fit with a composite spectrum based on a Miller-Scalo initial mass function, an underlying older population (modelled using the UV spectrum of 47 Tuc), and an extinction based on a SMC-like extinction cure. This fit implies that the total mass of young stars (with M equal to or greater than 1 solar mass) in the galaxy is approx. 7x10(5) solar mass, which can be compared to the total mass of globular cluster like stars in the galaxy of approx. 8x10(7) solar mass.

Wilcots, Eric M.↗
NASA NTRS1989

Hybrid propulsion technology program: Phase 1, volume 4

The use of a liquid oxidizer-solid fuel hybrid propellant combination in booster rocket motors appears extremely attractive due to the integration of the best features of liquid and solid propulsion systems. The hybrid rocket combines the high performance, clean exhaust, and safety of liquid propellant engines with the low cost and simplicity of solid propellant motors. Additionally, the hybrid rocket has unique advantages such as an inert fuel grain and a relative insensitivity to fuel grain and oxidizer injection anomalies. The advantages mark the hybrid rocket as a potential replacement or alternative for current and future solid propellant booster systems. The issues are addressed and recommendations are made concerning oxidizer feed systems, injectors, and ignition systems as related to hybrid rocket propulsion. Early in the program a baseline hybrid configuration was established in which liquid oxygen would be injected through ports in a solid fuel whose composition is based on hydroxyl terminated polybutadiene (HTPB). Liquid oxygen remained the recommended oxidizer and thus all of the injector concepts which were evaluated assumed only liquid would be used as the oxidizer.

Claflin, S. E.↗
NASA NTRS1991

The composition of Phobos: Meteorite analogs based on KRFM and VSK spectral data from the Phobos 2 spacecraft

In 1989 the Phobos 2 spacecraft obtained 8-channel 0.3 to 0.6 mm KRFM spectra and two-channel wide-angel TV VSK images in bandpasses of 0.40 to 0.56 mm and 0.78 to 1.10 mm. The TV data were used to map four color ratio units on disk-resolved images of Phobos, and were combined with the KRFM spectra to analyze possible meteorite analogs for the mapped units. A total of 58 spectra of 39 meteorites were studied for similarities with Phobos data in spectral shape, absorption features, and visible near-IR color ratio. Analysis of the spectral data show that, among the meteorites studied, there are no unique spectral analogs for Phobos surface material. Currently, the closest spectral analogs are the optically altered black chondrite meteorites Gorlovka and Pervomaisky. The weak UV absorption bands in some KRFM spectra and the red slope in VSK color-ratio data indicate that carbonaceous chondrite-like material may also be a component of Phobos surface material. However, the lack of close carbonaceous chondrite spectral analogs and the existence of apparent absorption bands in KRFM spectra that are not seen in meteorite spectra suggest that there are processes and/or materials on the surface of Phobos that are not represented in the meteorite collections. The similarities between KRFM spectra of Phobos and the spectra of black chondrites suggest that optically altered mafic silicates may constitute a component of the surface material of Phobos, and that optical alteration and mixing by regolith processes may be an important factor in the evolution of Phobos surface material.

Britt, D. T.↗
NASA NTRS1987

Fatigue-resistant nickel-base superalloys

New γ' strengthened nickel-base superalloy compositions are described that, when forged and properly heat treated, demonstrate superior resistance to fatigue crack growth accompanied by very good high temperature properties. Parts can be fabricated (e.g., using conventional cast and wrought processing) from these alloys without encountering difficulty in forging.

Keh-Minn Chang↗
NASA NTRS1990

The Iosipescu shear test method as used for testing polymers and composite materials

This paper describes a shear test method for polymers and composite materials, based on the Iosipescu (1967) shear test which was originally developed for use with homogeneous isotropic metals. Special attention is given to the loading fixture for the test, the standard specimen design and shear stress measurements. The range of the test applications is indicated. The method is in the final stages of being accepted as an ASTM standard.

Adams, Donald F.↗
NASA NTRS1990

Ultraviolet observations of NGC 205

Low-resolution IUE observations of the dwarf elliptical galaxy NGC 205 show that the UV spectral energy distribution of the galaxy is relatively flat. Spectra centered on the nucleus and on a region north of the nucleus show evidence of recent 'bursts' of star formation which contribute strongly to the UV spectral energy distribution. The UV spectra are fit with a composite spectrum based on a Miller-Scalo initial mass function, an underlying older population and an extinction based on a SMC-like extinction curve. This fit implies that the total mass of young stars in the galaxy is about 700,000 solar mass, which can be compared to the total mass of Population II stars in the galaxy of about 100 million solar mass.

Wilcots, Eric M.↗
NASA NTRS1991

Optical model description of momentum transfer in relativistic heavy ion collisions

An optical model description of momentum transfer in relativistic heavy ion collisions, based upon composite particle multiple scattering theory, is presented. The imaginary component of the complex momentum transfer, which comes from the absorptive part of the optical potential, is identified as the longitudinal momentum downshift of the projectile. Predictions of fragment momentum distribution observables are made and compared with experimental data. Use of the model as a tool for estimating collision impact parameters is discussed.

Khan, F.↗
NASA NTRS1991

Propellant development for the Advanced Solid Rocket Motor

The properties of a propellant developed for the NASA Advanced Solid Rocket Motor (ASRM) are described in terms of its composition, performance, and compliance to NASA specifications. The class 1.3 HTPB/AP/A1 propellant employs an ester plasticizer and the content of ballistic solids is set at 88 percent. Ammonia evolution is prevented by the utilization of a neutral bonding agent which allows continuous mixing. The propellant also comprises a bimodal AP blend with one ground fraction, ground AP of at least 20 microns, and ferric oxide to control the burning rate. The propellant's characteristics are discussed in terms of tradeoffs in AP particle size and the types of Al powder, bonding agent, and HTPB polymer. The size and shape of the ballistic solids affect the processability, ballistic properties, and structural properties of the propellant. The revised baseline composition is based on maximizing the robustness of in-process viscosity, structural integrity, and burning-rate tailoring range.

Landers, L. C.↗
NASA NTRS1992

Preliminary Design Of Adhesively Bonded Composite Joints

Joints symmetrical and long enough to withstand cyclic loads and hygrothermal effects. Step-by-step procedure for preliminary design of adhesively bonded joints between laminated fiber-reinforced-matrix composite bars based on simplified methods for prediction of microstresses and local strengths, including interlaminar strengths. Involves approximate calculations of stresses in various components of joint. Includes calculations to determine such critical parameters as minimum length, maximum shear stress in adhesive, and peeloff stress. Deleterious effects of cyclic loading, increased temperature, and humidity also taken into account.

Chamis, C. C.↗
NASA NTRS1991

Ionospheric ion composition from satellite measurements made during 1970-1980 - Altitude profiles

Ion-mass spectrometers were carried by a number of satellites in the 1970s. The ion-composition measurements from two of these missions, the Orbiting Geophysical Observatory-6 and the Atmosphere Explorer-C, are collected into an ion composition data base to evaluate several widely used empirical and theoretical models for the species H(+), He(+), N(+), O(+), NO(+), N2(+), and O2(+). The data base covers all latitudes and local times, and the altitude range from 150 km to 1200 km, but here altitude plots are presented of the ion densities at noon and at dip latitudes of 20-40 deg N. The satellite data are compared with an early ion-density profile, with the Koehnlein and IRI-90 empirical models, and with the Utah State University theoretical ionosphere model. These comparisons serve to verify some aspects of the models, but they also reveal some outstanding differences. The solar activity dependence of H(+), He(+), N(+), and O(+) is demonstrated, although this has not been possible for the molecular ions because low altitude measurements have not been made near solar maximum.

Hoegy, W. R.↗
NASA NTRS1993

Properties Of Carbon/Carbon and Carbon/Phenolic Composites

Report presents data on physical properties of carbon-fiber-reinforced carbon-matrix and phenolic-matrix composite materials. Based on tests conducted on panels, cylinders, blocks, and formed parts. Data used by designers to analyze thermal-response and stress levels and develop structural systems ensuring high reliability at minimum weight.

Mathis, John R.↗
NASA NTRS1993

Report of the Meteoroid and Debris Special Investigation Group

The LDEF Meteoroid and Debris Special Investigation Group (hereafter M&D SIG) was formed to maximize the data harvest from LDEF by permitting the characterization of the meteoroid and space debris impact record of the entire satellite. Thus, our work is complementary to that of the various M&D PI's, all of whom are members of the SIG. This presentation will summarize recent results and discussions concerning five critical SIG goals: (1) classification of impactors based upon composition of residues, (2) small impact (microimpact) features, (3) impact cratering and penetration data to derive projectile sizes and masses, (4) particulate flux estimates in low-Earth orbit, and (5) the LDEF Meteoroid and Debris database.

Zolensky, Michael E.↗
NASA NTRS1994

Fire hazard considerations for composites in vehicle design

Military ground vehicles fires are a significant cause of system loss, equipment damage, and crew injury in both combat and non-combat situations. During combat, the ability to successfully fight an internal fire, without losing fighting and mobility capabilities, is often the key to crew survival and mission success. In addition to enemy hits in combat, vehicle fires are initiated by electrical system failures, fuel line leaks, munitions mishaps and improper personnel actions. If not controlled, such fires can spread to other areas of the vehicle, causing extensive damage and the potential for personnel injury and death. The inherent fire safety characteristics (i.e. ignitability, compartments of these vehicles play a major roll in determining rather a newly started fire becomes a fizzle or a catastrophe. This paper addresses a systems approach to assuring optimum vehicle fire safety during the design phase of complex vehicle systems utilizing extensive uses of composites, plastic and related materials. It provides practical means for defining the potential fire hazard risks during a conceptual design phase, and criteria for the selection of composite materials based on its fire safety characteristics.

Gordon, Rex B.↗
NASA NTRS1994

Geochemical evidence for mixing of three components in martian orthopyroxenite ALH 84001

ALH 84001, a ferroan martian orthopyroxenite, originally consisted of three petrographically defined components: a cumulus assemblage of orthopyroxene + chromite, a trapped melt assemblage of orthopyroxene(?) + chromite + maskelynite + apatite + augite +/- pyrite, and a metasomatic assemblage of carbonate +/- pyrite. We present the results of Instrumental Neutron Activation Analysis (INAA) study of five bulk samples of ALH 84001, combined with Scanning Ion Mass Spectrometer (SIMS) data on the orthopyroxene, in order to attempt to set limits on the geochemical characteristics of the latter two components, and therefore on the petrogenesis of ALH 84001. The INAA data support the petrographic observations, suggesting that there are at least three components in ALH 84001. We will assume that each of the three geochemically required components can be equated with one of the petrographically observed components. Both trapped melt and metasomatic components in ALH 84001 have higher Na than orthopyroxene based on compositions of maskelynite, apatite, and carbonate. For the metasomatic component, we will assume its Na content is that of carbonate, while for a trapped melt component, we will use a typical Na content inferred for martian meteorite parent melts, approximately 1 wt% Na2O. Under these assumptions, we can set limits on the Light Rare Earth Elements/Heavy Rare Earth Elements (LREE/HREE) ratios of the components, and use this information to compare the petrogenesis of ALH 84001 with other martian meteorites. The above calculations assume that the bulk samples are representative of different portions of ALH 84001. We will also evaluate the possible heterogeneous distribution of mineral phases in the bulk samples as the cause of compositional heterogeneity in our samples.

Mittlefehldt, D. W.↗
NASA NTRS2001

Multiple Spectral Components in Nearby Radio Galaxies

The purpose of this work was to study the complicated structures appearing in ROSAT PSPC observations of nearby radio galaxies through detailed spectroscopy using ASCA, and through combining spectroscopic and structural analyses. The galaxy studied in this work was NGC 6251, believed to have a composite structure based on our ROSAT PSPC analysis, with a strong, point-like, nonthermal core embedded in a weaker, group-scale, thermal halo. However, this simplest interpretation of the PSPC data (Birkinshaw & Worrall 1993; ApJ 412 568) is not unique. Other possibilities included strong thermal emission from the core, with an implied cooling flow. ASCA's spectroscopic capabilities were expected to resolve the ambiguity. When the ASCA data for NGC 6251 were received, we found (after resolving considerable difficulties with the calibration) that they are entirely consistent with a simple power-law interpretation, but that a strong intrinsic X-ray absorbing column is required in NGC 6251. This absorbing column can be identified with the neutral hydrogen found with the VLA (Birkinshaw & Worrall, 1994; BAAS, 25, 1432), and confirmed in a later, higher-resolution, VLA study.

Birkinshaw, M.↗