Search NASA⌕ Search

SEARCH · Search NASA

Results for “CORROSIVE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

Effect of Tempered Martensite and Ferrite/Bainite on Corrosion Behavior of Low Alloy Steel Used for Flexible Pipe Exposed to High-Temperature Brine Environment

Immersion experiments and electrochemical measurements were carried out to study the effect of tempered martensite and ferrite/bainite on corrosion behavior of low alloy steel used for flexible pipe exposed to high-temperature brine environment in terms of microstructure morphology, corrosion rate, corrosion products characteristics, potentiodynamic polarization curves and electrochemical impedance spectroscopy. The experimental results indicated that the proportion of high-angle grain boundaries of tempered martensite steel was greater than ferrite/bainite steel. The corrosion rate of ferrite/bainite steel was lower than tempered martensite steel. With increasing immersion time, the structure of corrosion products formed on the surface of ferrite/bainite steel was more compact and denser than tempered martensite steel. In addition, the current density of ferrite/bainite steel was lower than tempered martensite steel. The charge transfer resistance and total impedance of ferrite/bainite steel were larger than tempered martensite steel. Thus, the corrosion resistance of ferrite/bainite steel exposed to high-temperature brine environment was excellent compared to the tempered martensite steel.

36 MATERIALS SCIENCE↗

Comparison of the Phase Stability and Corrosion Resistance of the Ni-Based Alloys C-4 and C-276

A one-to-one correspondence is developed between the phase stability and corrosion resistance of the commercial (Ni-Cr-Mo)-based alloys C-276 and C-4. Alloy C-4 is shown to outperform alloy C-276 in acidic oxidizing media and approaches its resistance in acidic reducing media. Both alloys are found to have similar resistance to chloride-induced stress corrosion cracking in the annealed condition with short-range order. The aqueous corrosion resistance of both alloys is found to be improved by long-range order; however, they become highly susceptible to chloride-induced stress corrosion cracking. Alloy C-4 is distinguished by being stable toward precipitation of detrimental intermetallic compounds. However, alloy C-276 is shown to be prone to precipitation of mu phase which degrades its resistance to aqueous corrosion and chloride-induced stress corrosion cracking. It is concluded that the chemical composition of alloy C-4 is tailored to make it more versatile than alloy C-276 in acidic oxidizing media and the results are found to be consistent with the concept of atomic percent factor of each alloy.

36 MATERIALS SCIENCE↗

Electrochemical Corrosion Behavior of 5083 Aluminum Alloy Subjected to Laser Shock Peening

This paper investigates the effect of ablative coating used during laser shock peening (LSP) on corrosion behavior of 5083 aluminum alloy in artificial seawater. Micro-hardness, residual stress, and surface morphology of the specimens were measured. The corrosion behavior was investigated by electrochemical test. Surface corrosion morphologies after electrochemical tests were examined by SEM and EDS. The results show that surface roughness and surface compressive residual stress of the specimen treated by LSP without ablative coating (LSPwC) are lower than that of the specimen treated by LSP with ablative coating under the same laser energy. The open-circuit potentials and self-corrosion potentials of the specimens treated by LSP and LSPwC both shift positively, and the diameters of the capacitor arcs were larger after LSP and LSPwC. The corrosion resistance of 5083 aluminum alloy is improved by LSP and LSPwC. Moreover, superior corrosion resistance is achieved without using the ablative coating during LSP.

36 MATERIALS SCIENCE↗

Corrosion Behavior of Fe-7Cr-1Mo-12Zr Metal Waste Form Alloy in Simulated Repository Environment

Metal waste forms (MWF) are solid metallic waste categorized as high-level radioactive waste generated during pyro-reprocessing of spent metallic fuels and geologically disposed off. This waste form generated requires an excellent corrosion resistance in a geological repository environment. In the present work, Fe-7Cr-1Mo-12Zr MWF alloy was developed by casting in an arc melting furnace. The x-ray diffraction analysis revealed the formation of stable phases of α-Fe solid solution and the intermetallic phases of Fe{sub 2}Zr and Fe{sub 23}Zr{sub 6}. The corrosion behavior of Fe-7Cr-1Mo-12Zr alloy was investigated using electrochemical techniques in aggressive (highly acidic with Cl{sup −}) and nominal repository pH environment. Cyclic potentiodynamic polarization studies indicated the shift in corrosion potential toward cathodic potential in highly acidic solution with Cl{sup −}. The corrosion mechanism of pitting is associated with acidified pH medium with more Cl{sup −}, whereas uniform corrosion or transpassive dissolution is resultant of mild acidity or mild alkaline medium. The passive region is wider in pH 5 and 8 when compared to pH 1 and 3. Electrochemical impedance spectroscopic (EIS) analysis revealed the lowering of passive film stability in the highly acidic medium in the presence of Cl{sup −}. The role of passive oxide layers on the corrosion resistance of the Fe-7Cr-1Mo-12Zr MWF alloy is discussed.

36 MATERIALS SCIENCE↗

Corrosion integrity of oil cement modified by environment responsive microspheres for CO2 geologic sequestration wells

In order to ensure the safe and effectiveness of CO{sub 2} geological storage, an environmental responsive polymer microspheres (ERPM) was prepared to improve the corrosion resistance of cement stone. The structure and environmental response characteristics of ERPM were characterized, and then the anti-corrosion performance and anti-corrosion mechanism for ERPM were discussed. The results shown that ERPM had good environmental response characteristics and temperature resistance. ERPM could effectively suppressed the corrosion rate and the damage degree of mechanical properties of cement stone. The corrosion integrity of cement stone was improved due to the acidic response characteristic and form polymer films of ERPM, which effectively shield the direct contact between corrosion medium and hydration products.

36 MATERIALS SCIENCE↗

First-principles search for alloying elements that increase corrosion resistance of Mg with second-phase particles of transition metal impurities

A significant challenge for applications of Mg alloys is their poor corrosion resistance and hence Mg alloys designs with built-in corrosion resistance are of significant interest. Corrosion can result from the coupling of anodic dissolution of Mg and cathodic reduction of water on impurities such as Iron (Fe)-rich second-phase particles. Experiments have shown that small quantities of Arsenic (As) or Germanium (Ge) can inhibit Mg corrosion, possibly slowing the hydrogen evolution reaction (HER) as the cathodic reaction on Fe surfaces. Since a broader experimental search across the periodic table for other Mg corrosion inhibiting elements is unavailable, we designed thermodynamic and HER criteria, and used high-throughput computations to search a pool of 68 elements including As and Ge that can segregate from bulk Mg to surfaces of Fe particles and impede the HER there. Our computational procedure predicts that six p-block elements meet these criteria, and they rank according to their ability to reduce H adsorption energies and the HER rate as follows: As > Ge > Si > Ga > P ≈ Al. Results for As, the most effective corrosion-inhibiting element, and Ge are in qualitative accord with recent experiments. Further, while none of the 68 elements was found to enhance H adsorption, the six p-block elements reduce H adsorption via strong orbital overlap (Pauli repulsion) between their outer-shell orbitals and the s orbitals of H adsorbates. These p-block elements are also found to have the potential to reduce HER on surfaces of Ni second-phase particles in Mg according to the same criteria, but not on surfaces of Cu second-phase particles.

36 MATERIALS SCIENCE↗

Enhanced crevice corrosion of stainless steel 316 by degradation of Cr-containing hollandite crevice former

This study explores the corrosion interactions between stainless steel 316 (SS316), a candidate nuclear waste canister material, and Cr-containing hollandite (Ba 1.15 Cr 2.3 Ti 5.7 O 16 ), a model ceramic nuclear waste form. The two materials were corroded in close proximity in 0.6 M NaCl solution at 90 °C for 28 days. Severe crevice corrosion was observed on the stainless steel surface after the corrosion experiment, which is likely associated with the rapid accumulation of Cr 3+ cations originating from both SS316 and the Cr-containing hollandite. Furthermore, the enhanced corrosion of SS316 by the corrosion products of hollandite is quantitatively explained using a classical crevice corrosion model.

36 MATERIALS SCIENCE↗

Application of the immobilized low-activity waste glass corrosion model to the static dissolution of 24 statistically-designed alkali-borosilicate waste glasses

Glass corrosion models that capture the complex mechanisms of the glass-water reaction enable the prediction of nuclear waste glass durability in disposal scenarios. Parameterization of such models is challenging because of the need to capture changes in corrosion behavior with time, reaction conditions, and glass composition. In this report we describe and employ the immobilized low activity waste (ILAW) glass corrosion model (IGCM) in geochemical simulations of static dissolution tests, at two temperatures (40 °C and 90 °C), for a matrix of 24 enhanced low activity waste (eLAW) glasses statistically designed to cover a processable composition space defined by 8 major glass components (Al 2 O 3 , B 2 O 3 , CaO, Na 2 O, SiO 2 , SnO 2 , ZrO 2 , and Others as defined in the text). The IGCM includes a first-order chemical affinity term and an ion-exchange term that represents the net exchange of Na+ ions in the pristine glass with protons in aqueous solution. Constant, time-dependent, and time- and pH-dependent functional forms of the ion-exchange term are evaluated to reproduce the change in corrosion behavior with time in saturated, static dissolution tests. The agreement with measured aqueous concentrations of the main glass components (B, Na, and Si) improved significantly upon addition of a time-dependent term, which therefore constitutes a simple representation of the glass-water reaction progress. Due to the limited changes in pH in the static dissolution tests, past a short initial period of rapid increase, addition of a pH dependent term did not appreciably improve the fits, indicating that comprehensive model parameterization requires more than one type of glass corrosion test to capture a wide range of solution chemistries. IGCM parameters were found to be dependent on glass composition, and the parameter sets generated in this work will enable the development of composition–parameter correlation models that offer the promise of predicting IGCM parameters, and thus glass corrosion behavior, solely based on glass composition.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

The corrosion performance of die-cast magnesium alloy MRI230D in 3.5% NaCl solution saturated with Mg(OH){sub 2}

The environmental behavior of die-cast magnesium alloy MRI230D designated for high-temperature applications was evaluated in comparison with regular AZ91D alloy. The microstructure examination was carried out using SEM, TEM, and X-ray diffraction analysis; the corrosion performance in 3.5% NaCl solution was evaluated by immersion test, salt spray testing, potentiodynamic polarization analysis, and stress corrosion behavior by Slow Strain Rate Testing (SSRT). Although the general corrosion resistance of MRI230D was slightly improved compared to that of AZ91D alloy its stress corrosion resistance was relatively reduced. The variations in the environmental behavior of the two alloys were mainly due to the differences in their chemical composition and microstructure after die casting. In particular, the differences were related to the reduced Al content in MRI230D and the addition of Ca to this alloy, which consequently affected its relative microstructure and electrochemical characteristics. - Research Highlights: {yields}Corrosion and SCC resistance of a new Mg alloy MRI230D was evaluated vs. regular AZ91D. {yields}MRI230D has a minor advantage in corrosion performance compared with AZ91D. {yields}The SCC resistance of MRI230D by SSRT analysis was relatively reduced. {yields}The reduced SCC resistance of MRI230D was due to the detrimental effect of Ca on ductility.

36 MATERIALS SCIENCE↗

Influence of the secondary phase on micro galvanic corrosion of low carbon bainitic steel in NaCl solution

Highlights: • Micro galvanic couple forms between steel matrix and secondary phase for LCB steel. • Micro galvanic couple causes non-uniform corrosion on micro area surface of steel. • The ω secondary phase acts as the micro anode in lath bainitic steel. • The M secondary phase acts as the micro cathode in granular bainitic steel. • Galvanic accelerated corrosion is obvious initially and weakened for long term. - Abstract: The corrosion behavior of lath bainitic and granular bainitic steels in 0.01 mol/L NaCl solution was studied by SEM and TEM observation, electrochemical monitoring and weight loss test. The results indicate that the micro galvanic couple forms between the steel matrix and the secondary phase, which causes non-uniform micro corrosion on surfaces of two steels. In lath bainitic steel, the secondary phase ω acts as the micro anode. While in granular bainitic steel, the secondary phase M acts as the micro cathode. Moreover, the corrosion acceleration caused by micro galvanic couple is obvious in the initial immersion stage, and then it becomes weak during the long term corrosion.

36 MATERIALS SCIENCE↗

Correlation between corrosion resistance, anodic hydrogen evolution and microhardness in friction stir weldment of AA2198 alloy

Highlights: • There is a relationship between hardness, corrosion and H{sub 2} evolution in AA2198-T851 alloy friction stir weldment • Variation in the population density of T1 particles is the correlating factor for the relationship • The parent material is the region that is most susceptible to corrosion. • The weld zones of AA2198-T851 alloy friction stir weldment exhibit different forms of corrosion. - Abstract: Correlation between corrosion resistance, anodic hydrogen evolution and microhardness in the friction stir weldment of AA2198-T851 alloy has been investigated. Different microscopy techniques, scanning vibrating electrode technique (SVET) and potentiodynamic polarization tests were employed in the investigation. Unlike other 3rd generation Al-Cu-Li alloys where the regions that are most susceptible to corrosion are always within the weld region, the results reveal that the parent material is the most susceptible in this case. There is a direct correlation between corrosion resistance, anodic hydrogen evolution and microhardness in the weldment, and the T{sub 1} phase is associated with the direct correlation.

36 MATERIALS SCIENCE↗

Molten chloride salts for next generation CSP plants: Electrolytical salt purification for reducing corrosive impurity level

In this study, electrolysis with a Mg anode is presented to purify the molten chloride salt (MgCl 2 /KCl/NaCl 60/20/20 mol.%) for reducing its corrosivity. Using a Mg anode, the production of toxic gases like Cl 2 on an inert anode (e.g., tungsten) can be avoided. Moreover, compared to an inert anode, a lower over-potential is required to remove the corrosive impurity MgOH + in the molten salt due to the high reactivity of Mg. In order to evaluate the effect of the salt purification, the cyclic voltammetry (CV) method developed in our previous work is used to in-situ measure the concentration of the corrosive MgOH + impurity in the molten salt. The CV measurements indicate that the corrosive impurity is efficiently removed by electrolysis. For decreasing the cathode inactivation due to produced MgO on the surface, a pulsed potential applied on the tungsten cathode during electrolysis shows to be promising. This electrochemical salt purification method has shown to be promising by efficiently controlling the corrosivity of the molten chloride salt. The potentiodynamic polarization (PDP) measurements on a commercial high-temperature alloy (Incoloy 800 H) immersed in the molten salt indicate that the corrosion rate of the alloy is significantly reduced due to the salt purification. It could also lead to a reduction of the cost of the conventional salt purification step, structural container materials, and piping in next generation concentrated solar power (Gen3 CSP) plants.

14 SOLAR ENERGY↗

Assessment of dissimilar metal corrosion in molten chloride salt

Dissimilar metal corrosion between high nickel alloys and stainless steel was tested in purified molten chloride salt. Preliminary results have shown that corrosion rates are significantly affected for samples both when electrically connected and isolated. Suggesting that galvanic corrosion as well as non-galvanic dissimilar metal corrosion play a role in corrosion processes for multi component systems. Finally, these results suggest that even if efforts to prevent electrical contact are taken, close proximity of structural materials can still change corrosion rates in molten salt environments.

14 SOLAR ENERGY↗

Genesis of Nanogalvanic Corrosion Revealed in Pearlitic Steel

Nanoscale, localized corrosion underpins billions of dollars in damage and material costs each year; however, the processes responsible have remained elusive due to the complexity of studying degradative material behavior at nanoscale liquid–solid interfaces. Recent improvements to liquid cell scanning/transmission electron microscopy and associated techniques enable this first look at the nanogalvanic corrosion processes underlying this widespread damage. Nanogalvanic corrosion is observed to initiate at the near-surface ferrite/cementite phase interfaces that typify carbon steel. In minutes, the corrosion front delves deeper into the material, claiming a thin layer of ferrite around all exposed phase boundaries before progressing laterally, converting the ferrite to corrosion product normal to each buried cementite grain. Over the following few minutes, the corrosion product that lines each cementite grain undergoes a volumetric expansion, creating a lateral wedging force that mechanically ejects the cementite grains from their grooves and leaves behind percolation channels into the steel substructure.

36 MATERIALS SCIENCE↗

From Micro-environments to Macroscopic Effects: How the Alkaline Hydrogen Evolution Reaction Drives Cu Cathodic Corrosion

Cathodic corrosion of copper (Cu) has posed a significant challenge for over a century, impeding various technological progresses such as electrochemical conversion of CO 2 (eCO 2 RR) into fuels and other value-added carbon products. Here, in this study, employing a combined Density Functional Theory (DFT) and kinetic Monte Carlo (kMC) simulation approach, we delve into the atomistic level mechanism driving this phenomenon in Cu. Our hypothesis posits the pivotal role of alkaline hydrogen evolution reaction (HER) in facilitating cathodic corrosion in Cu. We rigorously develop a pH-dependent hydroxide (OH) adsorption mechanism and calculate the equilibrium OH coverage (𝜃 OH ) at varying pH levels, the thermodynamic stability of subsurface oxygen (O sub ), as well as the Cu-vacancy mediated diffusion of subsurface oxygens (O sub ). Through comprehensive analysis, we establish correlation among various microenvironments, including oxygen diffusion in subsurface layers, pH-dependent OH adsorption, and Cu dissolution into the electrolyte as (Cu-OH) complexes. Furthermore, our investigation explores the correlation between surface coordination environment of active sites and cathodic corrosion of Cu. Finally, by integrating DFT-derived thermodynamic data into a kMC model, we successfully predict the formation of experimentally observed corrosion pits on Cu-surfaces. This combined approach not only advances our fundamental understanding of Cu cathodic corrosion but also offers insights crucial for developing effective corrosion mitigation strategies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of V Content on Corrosion Behavior of Al-V Alloys Produced by Mechanical Alloying and Subsequent Spark Plasma Sintering

Al-V alloys produced via high-energy ball milling have been reported to show simultaneous improvement of corrosion resistance and mechanical properties compared to traditional Al alloys. In these alloys, V content plays a crucial role in increasing or decreasing the corrosion resistance. Therefore, the effect of V and microstructure on corrosion of high-energy ball milled and subsequently spark plasma sintered Al-xV alloys (x = 2, 5, 10 at%) has been studied. Cyclic potentiodynamic polarization tests and electrochemical impedance spectroscopic analysis revealed the increment of V content up to 5 at% enhanced the corrosion resistance of the alloy. However, highly heterogeneous microstructure in Al-10 at%V resulted in significant localized corrosion over the immersion time. The electrochemical impedance spectroscopy studies over 14 days of immersion revealed underlying corrosion mechanisms.

36 MATERIALS SCIENCE↗

Corrosion Resistance of Amorphous Fe 49.7 Cr 17.7 Mn 1.9 Mo 7.4 W 1.6 B 15.2 C 3.8 Si 2.4 Coating: A New Criticality Control Material

Here, an iron-based amorphous metal with good corrosion resistance and a high absorption cross section for thermal neutrons has been developed and is reported here. This amorphous alloy has the approximate formula Fe 49.7 Cr 17.7 Mn 1.9 Mo 7.4 W 1.6 B 15.2 C 3.8 Si 2.4 and is known as SAM2X5. Chromium, molybdenum, and tungsten were added to provide corrosion resistance, while boron was added to promote glass formation and the absorption of thermal neutrons. Since this amorphous metal has a higher boron content than conventional borated stainless steels, it provides the nuclear engineer with design advantages for criticality control structures with enhanced safety. While melt-spun ribbons with limited practical applications were initially produced, large quantities (several tons) of gas-atomized powder have now been produced on an industrial scale, and applied as thermal-spray coatings on prototypical half-scale spent-nuclear-fuel containers and neutron-absorbing baskets. These prototypes and other SAM2X5 samples have undergone a variety of corrosion testing, including both salt-fog and long-term immersion testing. Modes and rates of corrosion have been determined in various relevant environments and are reported here. While these coatings have less corrosion resistance than melt-spun ribbons and optimized coatings produced in the laboratory, substantial corrosion resistance has been achieved.

36 MATERIALS SCIENCE↗

Preliminary irradiation effect on corrosion resistance of zirconium alloys - 2016-0067

In order to improve the composition and structure of zirconium alloys, it is important to know how changes in their structure-phase state under irradiation affect various properties, including corrosion. In this work, autoclave corrosion tests were carried out on fuel cladding samples made of zirconium-niobium and zirconium-niobium-tin-iron alloy systems. All samples were preliminarily irradiated in a BOR-60 nuclear reactor at a fluence of 2 X10{sup 26} m{sup -2} (E>0.1 MeV). The autoclave tests of irradiated and unirradiated samples were performed at 350 deg. C for 240 days in distilled water containing 10 ppm lithium and 1,600 ppm boron. The irradiation of all alloys resulted in a significant change in their initial structure-phase state. The content of niobium in b-niobium-phase precipitates was reduced from 80 % to - 90 % to 50 % to - 60 %. Iron atoms from the Laves-phase particles were diffused into a matrix, and their lattice transformed from hexagonal close-packed to body-centered cubic. An average size of the transformed second-phase precipitates in the irradiated alloys increased relatively to an average size of the initial precipitates. Elongated radiation-induced precipitates (RIPs) with an average length up to 7 nm were formed in all alloys under irradiation. In comparison with the unirradiated state, irradiation reduced the corrosion of zirconium-niobium alloys, and this effect became more apparent with increased niobium content in the alloy. For zirconium-niobium-tin-iron alloys, irradiation led to more severe corrosion, mostly because of increasing tin content. Niobium content increased up to 2.37 %, and iron content decreased up to 0.18 % in the alloys, contributing to higher corrosion resistance. An interconnection between the niobium/(tin + iron) alloying parameter, quantity of nanometric precipitates formed therein under irradiation, and their corrosion performance has been suggested. (authors)

36 MATERIALS SCIENCE↗