Search NASA⌕ Search

SEARCH · Search NASA

Results for “CoNNECT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

Composition dependent phase connectivity, dielectric and magnetoelectric properties of magnetoelectric composites with Pb(Mg{sub 1/3}Nb{sub 2/3}){sub 0.67}Ti{sub 0.33}O{sub 3} as piezoelectric phase

Ferrite (Ni{sub 0.6}Co{sub 0.4}Fe{sub 2}O{sub 4}) phase, ferroelectric (Pb(Mg{sub 1/3}Nb{sub 2/3}){sub 0.67}Ti{sub 0.33}O{sub 3}) phase and magnetoelectric composites of (x)Ni{sub 0.6}Co{sub 0.4}Fe{sub 2}O{sub 4} + (1 - x)Pb(Mg{sub 1/3}Nb{sub 2/3}){sub 0.67}Ti{sub 0.33}O{sub 3} with x = 0.15, 0.30 and 0.45 were prepared using solid-state reaction technique. Presence of Ni{sub 0.6}Co{sub 0.4}Fe{sub 2}O{sub 4} and Pb(Mg{sub 1/3}Nb{sub 2/3}){sub 0.67}Ti{sub 0.33}O{sub 3} was confirmed using X-ray diffraction technique. The scanning electron microscopic images were used to study the microstructure of the composites. Connectivity scheme present in the magnetoelectric (ME) composites are discussed from the microscopic images. Variation of dielectric constant and dielectric loss with temperature for all the composites was studied. Here we report the effect of Ni{sub 0.6}Co{sub 0.4}Fe{sub 2}O{sub 4} mole fraction on connectivity schemes between Ni{sub 0.6}Co{sub 0.4}Fe{sub 2}O{sub 4} and Pb(Mg{sub 1/3}Nb{sub 2/3}){sub 0.67}Ti{sub 0.33}O{sub 3} composite. The variation of magnetoelectric voltage coefficient with dc magnetic field shows peak behaviour. The maximum value of magnetoelectric voltage coefficient of 9.47 mV/cm Oe was obtained for 0.15Ni{sub 0.6}Co{sub 0.4}Fe{sub 2}O{sub 4} + 0.85Pb(Mg{sub 1/3}Nb{sub 2/3}){sub 0.67}Ti{sub 0.33}O{sub 3} composites. Finally we have co-related the effect of Ni{sub 0.6}Co{sub 0.4}Fe{sub 2}O{sub 4} content and dielectric properties on magnetoelectric voltage coefficient.

36 MATERIALS SCIENCE↗

Revisiting the connection of baryon number, lepton number, and operator dimension

The effects of heavy new particles beyond the Standard Model can be conveniently captured through higher-dimensional effective operators. As noted long ago by Weinberg, the amount of baryon and lepton number an operator can carry is intricately connected to its mass dimension. We derive an improved inequality for this connection and compare it to explicit operator constructions up to mass dimension 25. For the effective field theory of Standard Model plus right-handed neutrinos, our relationship is even an equality up to high mass dimension.

Baryon number violation↗

Comparison of the Optical Connectivity Method to X-Ray spray measurements in the near field of a diesel injector

For diesel sprays, the primary breakup processes are only rarely understood due to the high optical density and the resulting difficulties to measure them with extremely high spatial and sufficient temporal resolution. The Optical Connectivity Method (OCM) has been proposed in the last years to allow the determination of the breakup length of the connected liquid core, thus giving a measurement quantity of the primary breakup. In this research, an improved optical setup of the OCM is applied to a three-hole test injector nozzle where several measurement techniques are compared currently under well-defined conditions up to 100 MPa injection pressure. In this work, the direct comparison with X-Ray measurements done at the Advanced Photon Source of the Argonne National Laboratory will be described. This allows an evaluation of the OCM technique and a comparison of the different measurement quantities in the first 500 μm range of the spray. The structure of the spray is measured by X-Ray phase contrast imaging and the fuel mass distribution is measured by X-Ray absorption imaging. A detailed comparison of the two X-Ray techniques and the OCM technique has been possible for the first time. It is found that the measurement data of the spray near field are very congruent with all three methods. Due to this comparison, the measurement of the non-perturbed length, which describes the distance from the nozzle orifice up to the point where the formation of surface disturbances is starting, by the OCM is validated for the first time. Within this non-perturbed length of the spray, the OCM signal is weak before it starts to illuminate from the scattering of the perturbed surface. Hence, the OCM technique can deliver two characteristic length scales, the non-perturbed length and the breakup length , characterizing the primary spray breakup.

33 ADVANCED PROPULSION SYSTEMS↗

High-efficiency grid-connected photovoltaic module integrated converter system with high-speed communication interfaces for small-scale distribution power generation

This paper presents a high-efficiency grid-connected photovoltaic (PV) module integrated converter (MIC) system with reduced PV current variation. The proposed PV MIC system consists of a high-efficiency step-up DC-DC converter and a single-phase full-bridge DC-AC inverter. An active-clamping flyback converter with a voltage-doubler rectifier is proposed for the step-up DC-DC converter. The proposed step-up DC-DC converter reduces the switching losses by eliminating the reverse-recovery current of the output rectifying diodes. To reduce the PV current variation introduced by the grid-connected inverter, a PV current variation reduction method is also suggested. The suggested PV current variation reduction method reduces the PV current variation without any additional components. Moreover, for centralized power control of distributed PV MIC systems, a PV power control scheme with both a central control level and a local control level is presented. The central PV power control level controls the whole power production by sending out reference power signals to each individual PV MIC system. The proposed step-up DC-DC converter achieves a high-efficiency of 97.5% at 260 W output power to generate the DC-link voltage of 350 V from the PV voltage of 36.1 V. The PV MIC system including the DC-DC converter and the DC-AC inverter achieves a high-efficiency of 95% with the PV current ripple less than 3% variation of the rated PV current. (author)

14 SOLAR ENERGY↗

Electricity storage for grid-connected household dwellings with PV panels

Classically electricity storage for PV panels is mostly designed for stand-alone applications. In contrast, we focus in this article on houses connected to the grid with a small-scale storage to store a part of the solar power for postponed consumption within the day or the next days. In this way the house owner becomes less dependent on the grid and does only pay for the net shortage of his energy production. Local storage solutions pave the way for many new applications like omitting over-voltage of the line and bridging periods of power-line black-out. Since 2009 using self-consumption of PV energy is publicly encouraged in Germany, which can be realised by electric storage. This paper develops methods to determine the optimal storage size for grid-connected dwellings with PV panels. From measurements in houses we were able to establish calculation rules for sizing the storage. Two situations for electricity storage are covered: - the storage system is an optimum to cover most of the electricity needs; - it is an optimum for covering the peak power need of a dwelling. After these calculation rules a second step is needed to determine the size of the real battery. The article treats the aspects that should be taken into consideration before buying a specific battery like lead-acid and lithium-ion batteries. (author)

14 SOLAR ENERGY↗

A grid-connected photovoltaic power conversion system with single-phase multilevel inverter

This paper presents a grid-connected photovoltaic (PV) power conversion system based on a single-phase multilevel inverter. The proposed system fundamentally consists of PV arrays and a single-phase multilevel inverter structure. First, configuration and structural parts of the PV assisted inverter system are introduced in detail. To produce reference output voltage waves, a simple switching strategy based on calculating switching angles is improved. By calculated switching angles, the reference signal is produced as a multilevel shaped output voltage wave. The control algorithm and operational principles of the proposed system are explained. Operating PV arrays in the same load condition is a considerable point; therefore a simulation study is performed to arrange the PV arrays. After determining the number and connection types of the PV arrays, the system is configured through the arrangement of the PV arrays. The validity of the proposed system is verified through simulations and experimental study. The results demonstrate that the system can achieve lower total harmonic distortion (THD) on the output voltage and load current, and it is capable of operating synchronous and transferring power values having different characteristic to the grid. Hence, it is suitable to use the proposed configuration as a PV power conversion system in various applications. (author)

14 SOLAR ENERGY↗

Bounce-averaged theory in arbitrary multi-well plasmas: solution domains and the graph structure of their connections

Bounce-averaged theories provide a framework for simulating relatively slow processes, such as collisional transport and quasilinear diffusion, by averaging these processes over the fast periodic motions of a particle on a closed orbit. This procedure dramatically increases the characteristic time scale and reduces the dimensionality of the modelled system. The natural coordinates for such calculations are the constants of motion (COM) of the fast particle motion, which by definition do not change during an orbit. However, for sufficiently complicated fields – particularly in the presence of local maxima of the electric potential and magnetic field – the COM are not sufficient to specify the particle trajectory. In such cases, multiple domains in COM space must be used to solve the problem, with boundary conditions enforced between the domains to ensure continuity and particle conservation. Previously, these domains have been imposed by hand, or by recognising local maxima in the fields, limiting the flexibility of bounce-averaged simulations. Here, we present a general set of conditions for identifying consistent domains and the boundary condition connections between the domains, allowing the application of bounce-averaged theories in arbitrarily complicated and dynamically evolving electromagnetic field geometries. We also show how the connections between the domains can be represented by a directed graph, which can help to succinctly represent the trajectory bifurcation structure.

fusion plasma↗

Criticality and Connectivity in Macromolecular Charge Complexation

We examine the role of molecular connectivity and architecture on the complexation of ionic macromolecules (polyelectrolytes) of finite size. A unified framework is developed and applied to evaluate the electrostatic correlation free energy for point-like, rod-like, and coil-like molecules. That framework is generalized to molecules of variable fractal dimensions, including dendrimers. Analytical expressions for the free energy, correlation length, and osmotic pressure are derived, thereby enabling consideration of the effects of charge connectivity, fractal dimension, and backbone stiffness on the complexation behavior of a wide range of polyelectrolytes. Results are presented for regions in the immediate vicinity of the critical region and far from it. A transparent and explicit expression for the coexistence curve is derived in order to facilitate analysis of experimentally observed phase diagrams.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Exploring the Effects of Node Topology, Connectivity, and Metal Identity on the Binding of Nerve Agents and Their Hydrolysis Products in Metal–Organic Frameworks

Recent studies have shown that metal–organic frameworks (MOFs) built from hexanuclear M(IV) oxide cluster nodes are effective catalysts for nerve agent hydrolysis, where the properties of the active sites on the nodes can strongly influence the reaction energetics. The connectivity and metal identity of these M6 nodes can be easily tuned, offering extensive opportunities for computational screening to predict promising new materials. Thus, we used density functional theory (DFT) to examine the effects of node topology, connectivity, and metal identity on the binding energies of multiple nerve agents and their corresponding hydrolysis products. By computing an optimization metric based on the relative binding strengths of key hydrolysis reaction species (water, agent, and bidentate-bound products), we predicted optimal M6 nodes for hydrolyzing specific nerve agent and simulant molecules, where our results are in qualitative agreement with observed experimental trends. This analysis highlighted the notion that no single metal or node topology is optimal for all possible organophosphates, suggesting that MOFs should be selected based on the agent of interest. Using the large amount of data generated from our DFT calculations, we then derived quantitative structure–activity relationship (QSAR) models to help explain the complex trends observed in the binding energies. Through linear regression, we identified the most important descriptors for describing the binding of nerve agents and their hydrolysis products to M6 nodes. These results suggested that both molecular and node properties, including both structural and chemical features, collectively contribute to the binding energetics. By performing a thorough statistical analysis, we showed that our QSAR models are capable of making quantitatively accurate binding energy predictions for nerve agents and their hydrolysis products in a wide variety of M(IV)-MOFs. In conclusion, the insights gained herein can be used to guide future experiments for the synthesis of MOFs with enhanced catalytic activity for organophosphate hydrolysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of Building Block Connectivity and Ion Solvation on Electrochemical Stability and Ionic Conductivity in Novel Fluoroether Electrolytes

Novel electrolytes are required for the commercialization of batteries with high energy densities such as lithium metal batteries. Recently, fluoroether solvents have become promising electrolyte candidates because they yield appreciable ionic conductivities, high oxidative stability, and enable high Coulombic efficiencies for lithium metal cycling. However, reported fluoroether electrolytes have similar molecular structures, and the influence of ion solvation in modifying electrolyte properties has not been elucidated. In this work, we synthesize a group of fluoroether compounds with reversed building block connectivity where ether moieties are sandwiched by fluorinated end groups. These compounds can support ionic conductivities as high as 1.3 mS/cm (30 °C, 1 M salt concentration). Remarkably, we report that the oxidative stability of these electrolytes increases with decreasing fluorine content, a phenomenon not observed in other fluoroethers. Using Raman and other spectroscopic techniques, we show that lithium ion solvation is controlled by fluoroether molecular structure, and the oxidative stability correlates with the “free solvent” fraction. Finally, we show that these electrolytes can be cycled repeatedly with lithium metal and other battery chemistries. Understanding the impact of building block connectivity and ionic solvation structure on electrochemical phenomena will facilitate the development of novel electrolytes for next-generation batteries.

36 MATERIALS SCIENCE↗

Effect of Pore Connectivity on Li Dendrite Propagation within LLZO Electrolytes Observed with Synchrotron X-ray Tomography

Li 7 La 3 Zr 2 O 12 (LLZO) is a garnet type material that demonstrates promising characteristics for all solid-state battery applications due to its high Li-ion conductivity and its compatibility with Li metal. The primary limitation of LLZO is the propensity for short-circuiting at low current densities. Microstructure features such as grain boundaries, pore character, and density all contribute to this shorting phenomenon. Toward the goal of understanding structure-processing relationships for practical design of solid electrolytes, the present study tracks structural transformations in solid electrolytes processed at three different temperatures (1000, 1050 and 1150 °C) using synchrotron x-ray tomography. A sub volume of 300 μm 3 captures the heterogeneity of the solid electrolyte microstructure while minimizing the computational intensity associated with 3D reconstructions. While the porosity decreases with increasing temperature, the underlying connectivity of the pore region increases. In conclusion, solid electrolytes with interconnected pores short circuit at lower critical current densities than samples with less connected pores.

36 MATERIALS SCIENCE↗

Atomic Structural Features of Stacking Faults and Domain Connections in the Li- and Mn-Rich Cathode

Li- and Mn-rich layered oxides (LMRs), a class of earth-abundant materials for rechargeable Li-ion battery cathodes, crystallize into layered structures of two different symmetries: C2/m represented by Li 2 MnO 3 and R$\overline{3}$m represented by LiMn 0.5 Ni 0.5 O 2 . Fundamental questions about how the C2/m and R$\overline{3}$m domains spatially correlate within the same oxide grain and how the C2/m stacking faults arrange themselves when this happens still remain. Here, by using integrated differential phase contrast imaging in scanning transmission electron microscopy (STEM-iDPC), we probe the structural and compositional details of a prototypical, cobalt-free LMR material, 0.3Li 2 MnO 3 •0.7LiMn 0.5 Ni 0.5 O 2 (Li 1.13 Mn 0.57 Ni 0.3 O 2 ). The connection between the C2/m and R$\overline{3}$m domains is found to be abrupt, facilitated by the small lattice mismatch between the two structures. Stacking faults in the C2/m domains feature atomic plane shifting that accommodates stacking sequence changes, which explains why the stacking faults form in a random manner. Furthermore, a local disordering mechanism was identified to correlate with the C2/m stacking faults. Chemically, it is found that Ni coexists with Mn at the transition metal sites within the nominal Li 2 MnO 3 domain. As a result, this study demonstrates that STEM-iDPC is a very useful tool for capturing all the elements in a single image, revealing atomic details on domain connections and stacking faults in the LMRs.

Li-rich and Mn-rich oxides↗

Tuning Metal–Organic Framework (MOF) Topology by Regulating Ligand and Secondary Building Unit (SBU) Geometry: Structures Built on 8-Connected M 6 (M = Zr, Y) Clusters and a Flexible Tetracarboxylate for Propane-Selective Propane/Propylene Separation

Topology evolution originating from variations of linker and SBU (Secondary Building Unit) geometries could largely enrich the chemistry of metal–organic frameworks (MOFs). Here we report the synthesis and characterization of three MOF structures built on the same organic linker, N,N,N',N'-Tetrakis(4-carboxyphenyl)-1,4-phenylenediamine (tcppda) and similar 8-connected M 6 (M = Zr or Y) clusters. The three compounds, HIAM-402, HIAM-403, and HIAM-311, feature 4,8-connected sqc, scu, and flu topology, respectively. Detailed structural analysis revealed that different geometries of the inorganic M 6 SBUs as well as the organic linker have led to the formation of distinct MOF nets. In particular, HIAM-402 features exceptional framework stability and high porosity and acts as a propane-selective adsorbent for the discrimination of propane and propylene. Its balanced adsorption selectivity (S propane/propylene = 1.43) and capacity (Q propane = 133.3 cm 3 /g, 298 K and 1 bar) endow it with the capability of separating propane and propylene mixtures and one-step production of highly pure propylene (purity >99.9%), as validated by column breakthrough measurements, with the presence of moisture or propyne. As a result, ab initio calculations further confirm that the propane-selective behavior of HIAM-402 is a result of its higher binding energy toward propane compared to that of propylene.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Interflow Is Not Binary: A Continuous Shallow Perched Layer Does Not Imply Continuous Connectivity

Hillslopes exert critical controls on the quality and quantity of downstream waters. To understand and model dominant headwater catchment processes, we need to estimate the relative importance of different runoff generation processes. In this work we analyze published data from studies of 17 hillslopes from a range of landscapes to better understand the relative role of interflow, that is, shallow lateral subsurface flow moving over a layer impeding percolation, in streamflow generation. For each slope, we calculated downslope interflow travel distances, that is, the potential distance a water parcel travels downslope above an impeding layer until it percolates into the impeding layer. The downslope travel distances for the 17 hillslopes ranged from around 1 m to several hundred meters. The vector analysis of downslope travel distances revealed that all but three hillslopes had slope lengths that were much longer than downslope travel distances. For the remaining 14 cases we could show that most water perched above a shallow impeding layer percolates through the impeding layer before reaching the valley or the stream channel. Thus, interflow usually contributes directly to valley water or streamflow only from the lower portions of the hillslope in most landscapes. A critical finding of our analysis is that a continuously perched saturated zone with downslope flow does not imply continuous connectivity to the stream. Such a continuous connectivity is the exception rather than the rule in most landscapes. Future hillslope and headwater processes and modeling studies will need to account for this.

60 APPLIED LIFE SCIENCES↗

Connecting Pressure-Saturation and Relative Permeability Models to Fracture Properties: The Case of Capillary-Dominated Flow of Supercritical CO 2 and Brine

Fractures are potential pathways for subsurface fluids. In the context of geologic CO 2 sequestration, fractures could threaten the security of reservoirs since they are pathways for leakage. However, the constitutive equations describing the pressure-saturation and relative permeability-saturation, key inputs for flow modeling and prediction, are poorly understood for two-phase fracture flow at the field scale where each fracture might be an element of a complex fracture network or dual-porosity domain. This knowledge is required for the safe storage of CO 2 under potentially fractured caprocks. To address this, we numerically simulated two-phase viscous flow through horizontal heterogeneous fractures across a broad range of roughness and aperture correlation length. The numerical experiments, which solved the modified local cubic law, showed a weak to strong phase interference during the drainage process; that is, supercritical CO 2 displaces brine if the imposed pressure + local viscous force > local capillary force. The drainage process ended when no new brine cells can be further invaded by CO 2 . Afterward, we froze the saturation field for each individual phase and calculated the relative permeability by single-phase flow modeling. Thousands of simulated pressure-saturation and relative permeability curves enabled us to estimate and connect the parameters of the Van-Genuchten model and of the generalized ν-type model to fracture roughness and aperture correlation length. In conclusion, this empirical connection will be useful for assessing and predicting immiscible two-phase flow in horizontal rough fractures at the large scale.

54 ENVIRONMENTAL SCIENCES↗

Mountainous Floodplain Connectivity in Response to Hydrological Transitions

In mountainous watersheds, floodplain sediments are typically characterized by gravel bed layers capped by an overlying soil unit that serves as a hotspot for biogeochemical reactivity. However, the influence of soil biogeochemistry on gravel bed underflow composition remains unclear, especially during hydrological transitions that alter the vertical connectivity between overlaying soils and the underlying gravel bed. This study investigates these dynamics by measuring hydraulic gradients and water compositions over three hydrological years in a typical mountainous, low-order stream floodplain in the Upper Colorado River Basin. Results indicate that the timing of hydrological conditions strongly influences the vertical exchanges that control water quality. Specifically, during flooding events such as beaver ponding, that induce downward flushing of the soil, anoxic conditions prevalent in the biogeochemically active soil are transferred downstream via gravel bed underflow. Conversely, snowmelt and drought conditions increase oxic conditions in the gravel bed due to diminished hydrological connectivity with the overlying soil. To compare water quality response to hydrological transitions across similar floodplain environments, we propose a conceptual model that quantifies the inundation-induced flushing of soil porewater to measure solute exchange efficiency with the gravel bed solute convergence efficiency (SCE). This model provides a framework for quantifying biogeochemical processes in hydrological underflow systems, which is critical for water and elemental budgets in these globally important mountainous ecosystems.

58 GEOSCIENCES↗

Greenland subglacial drainage evolution regulated by weakly connected regions of the bed

Penetration of surface meltwater to the bed of the Greenland Ice Sheet each summer causes an initial increase in ice speed due to elevated basal water pressure, followed by slowdown in late summer that continues into fall and winter. While this seasonal pattern is commonly explained by an evolution of the subglacial drainage system from an inefficient distributed to efficient channelized configuration, mounting evidence indicates that subglacial channels are unable to explain important aspects of hydrodynamic coupling in late summer and fall. Here we use numerical models of subglacial drainage and ice flow to show that limited, gradual leakage of water and lowering of water pressure in weakly connected regions of the bed can explain the dominant features in late and post melt season ice dynamics. Finally, these results suggest that a third weakly connected drainage component should be included in the conceptual model of subglacial hydrology.

58 GEOSCIENCES↗

Si/SiGe QuBus for single electron information-processing devices with memory and micron-scale connectivity function

The connectivity within single carrier information-processing devices requires transport and storage of single charge quanta. Single electrons have been adiabatically transported while confined to a moving quantum dot in short, all-electrical Si/SiGe shuttle device, called quantum bus (QuBus). Here we show a QuBus spanning a length of 10 μm and operated by only six simply-tunable voltage pulses. We introduce a characterization method, called shuttle-tomography, to benchmark the potential imperfections and local shuttle-fidelity of the QuBus. The fidelity of the single-electron shuttle across the full device and back (a total distance of 19 μm) is (99.7 ± 0.3) %. Using the QuBus, we position and detect up to 34 electrons and initialize a register of 34 quantum dots with arbitrarily chosen patterns of zero and single-electrons. The simple operation signals, compatibility with industry fabrication and low spin-environment-interaction in 28 Si/SiGe, promises long-range spin-conserving transport of spin qubits for quantum connectivity in quantum computing architectures.

97 MATHEMATICS AND COMPUTING↗