Search NASA⌕ Search

SEARCH · Search NASA

Results for “Corrected equation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

538 records · Page 30
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Equation of state for He bubbles in W and model of He bubble growth and bursting near W{100} surfaces derived from molecular dynamics simulations

Abstract Molecular dynamics (MD) simulations are performed to derive an equation of state (EOS) for helium (He) bubbles in tungsten (W) and to study the growth of He bubbles under a W(100) surface until they burst. We study the growth as a function of the initial nucleation depth of the bubbles. During growth, successive loop-punching events are observed, accompanied by shifts in the depth of the bubble towards the surface. Subsequently, the MD data are used to derive models that describe the conditions that cause the loop punching and bursting events. Simulations have been performed at 500, 933, 1500, 2000, and 2500 K to fit the parameters in the models. To compute the pressure in the bubble at the loop punching and bursting events from the models, we derive an EOS for He bubbles in tungsten with an accompanying volume model to compute the bubble volume for a given number of vacancies ( $$N_\text {V}$$ N V ), He atoms ( $$N_\text {He}$$ N He ), and temperature ( T ). To derive the bubble EOS, we firstly derive the EOS for a free He gas. The derived free-gas EOS can accurately predict all MD data included in the analysis (which span up to 54 GPa at 2500 K). Subsequently, the bubble EOS is derived based on the free-gas EOS by correcting the gas density to account for the interaction between He and W atoms. The EOS for the bubbles is fitted to data from MD simulations of He bubbles in bulk W that span a wide range of gas density and sizes up to about 3 nm in diameter. The pressure of subsurface bubbles at the loop punching events as calculated using the bubble-EOS and the volume model agrees well with the pressure obtained directly from the MD simulations. In the loop punching model, for bubbles consisting of $$N_\text {V}$$ N V vacancies and $$N_\text {He}$$ N He helium atoms, the $$N_\text {He}/N_\text {V}$$ N He / N V ratio that causes the event, the resulting increase in $$N_\text {V}$$ N V , and the associated shift of the bubble depth are formulated as a function of $$N_\text {V}$$ N V and T . In the bursting model, a bubble must simultaneously reach a certain depth and $$N_\text {He}/N_\text {V}$$ N He / N V ratio in order to burst. The burst depth and $$N_\text {He}/N_\text {V}$$ N He / N V are also modeled as a function of $$N_\text {V}$$ N V and T . The majority of the loop punching events occur at bubble pressures between 20 and 60 GPa, depending on the bubble size and temperature. The larger the bubble and the higher the temperature, the lower the bubble pressure. Furthermore, our results indicate that at a higher temperature, a bubble can burst from a deeper region.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Toward real-time optimization through model reduction and model discrepancy sensitivities

Optimization problems arise in a range of scenarios, from optimal control to model parameter estimation. In many applications, such as the development of digital twins, it is essential to solve these optimization problems within wall-clock-time limitations. However, this is often unattainable for complex systems, such as those modeled by nonlinear partial differential equations. One strategy for mitigating this issue is to construct a reduced-order model (ROM) that enables more rapid optimization. In particular, the use of nonintrusive ROMs—those that do not require access to the full-order model at evaluation time—is popular because they facilitate the computation of optimization solutions within the wall-clock time requirements. However, the optimization solution will be unreliable if the iterates move outside the ROM training data. This article proposes the use of hyper-differential sensitivity analysis with respect to model discrepancy (HDSA-MD) as a computationally efficient tool to augment ROM-constrained optimization and improve its reliability. The proposed approach consists of two phases: (i) an offline phase where several full-order model evaluations are computed to train the ROM, and (ii) an online phase where a ROM-constrained optimization problem is solved, a limited number of full-order model evaluations are computed, and HDSA-MD is used to enhance the optimization solution. Numerical results are demonstrated for two examples, atmospheric contaminant control and wildfire ignition location estimation, in which a ROM is trained offline using inaccurate atmospheric data. In conclusion, the HDSA-MD update yields a significant improvement in the ROM-constrained optimization solution using only one full-order model evaluation online with corrected atmospheric data.

PDE-constrained optimization↗
DOE OSTI2022

Phase transitions in high-purity zirconium under dynamic compression

In this work, we present results from ramp compression experiments on high-purity Zr that show the α → ω, ω → β, as well as reverse β → ω phase transitions. Simulations with a multi-phase equation of state and phenomenological kinetic model match the experimental wave profiles well. While the dynamic α ! ! transition occurs ~ 9 GPa above the equilibrium phase boundary, the ω → β transition occurs within 0.9 GPa of equilibrium. We estimate that the dynamic compression path intersects the equilibrium ω – β line at P = 29:2 GPa, and T = 490 K. The thermodynamic path in the interior of the sample lies ~ 100 K above the isentrope at the point of the ω → β transition. Approximately half of this dissipative temperature rise is due to plastic work, and half is due to the non-equilibrium α → ω transition. The inferred rate of the α → ω transition is several orders of magnitude higher than that measured in dynamic diamond anvil cell (DDAC) experiments in an overlapping pressure range. We discuss a model for the influence of shear stress on the nucleation rate. We find that the shear stress s ji has the same effect on the nucleation rate as a pressure increase δP = cϵ ij s ji /(ΔV/V); where c is a geometric constant ~ 1 and, ϵ ij are the transformation shear strains. The small fractional volume change ΔV/V ≈ 0:1 at the α → ω transition amplifies the effect of shear stress, and we estimate that for this case δP is in the range of several GPa. Correcting our transition rate to a hydrostatic rate brings it approximately into line with the DDAC results, suggesting that shear stress plays a significant role in the transformation rate.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Inner Belt Electron Decay Timescales: A Comparison of Van Allen Probes and DREAM3D Losses Following the June 2015 Storm

Abstract NASA's Van Allen Probes observed significant, long‐lived fluxes of inner belt electrons up to ∼1 MeV after geomagnetic storms in March and June 2015. Reanalysis of Magnetic Electron Ion Spectrometer (MagEIS) data with improved background correction showed a clearer picture of the relativistic electron population that persisted through 2016 and into 2017 above the Fennell et al. (2015, https://doi.org/10.1002/2014gl062874 ) limit. The intensity and duration of these enhancements allow estimation of decay timescales for comparison with simulated decay rates and theoretical lifetimes. We compare decay timescales from these data and DREAM3D simulations based on them using geomagnetic activity‐dependent pitch angle diffusion coefficients derived from plasmapause‐indexed wave data (Malaspina et al., 2016, https://doi.org/10.1002/2016gl069982 , 2018, https://doi.org/10.1029/2018gl078564 ) and phase space densities derived from MagEIS observations. Simulated decay rates match observed decay rates more closely than the theoretical lifetime due to significantly nonequilibrium pitch angle distributions in simulation and data. We conclude that nonequilibrium effects, rather than a missing diffusion or loss process, account for observed short decay rates.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Bias-Adjustment Methods for Future Subdaily Precipitation Extremes Consistent Across Durations

Model output from climate projections often requires bias-adjustment to compensate for systematic model errors. A bias-adjustment method for extreme precipitation intensity is proposed that preserves the scaling equation for different accumulation levels from hourly to daily, using intensity-duration-frequency (IDF) modeling. A validation is performed within a pseudo-reality setting, based on hourly precipitation from 28 regional climate model projections of the EURO-CORDEX ensemble over Belgium. The scaling-based adjustment methods improve upon previous methods, an optimal method is identified, and, analytical quantile mapping methods must be avoided due to three identified problems. The ensemble mean of the adjusted extreme precipitation intensity obeys the above-mentioned scale-invariance property, which is consistent with observed extreme intensities. We thus show that IDF modeling provides added value in the context of bias-adjustment, and, that the particular IDF model proposed balances well between accuracy and the preservation of desired properties such as scale invariance and consistency among rainfall durations.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Multislice Electron Tomography Using Four-Dimensional Scanning Transmission Electron Microscopy

Electron tomography offers useful three-dimensional (3D) structural information, which cannot be observed by two-dimensional imaging. By combining annular dark-field scanning transmission electron microscopy (ADF STEM) with aberration correction, the resolution of electron tomography has reached atomic resolution. However, tomography based on ADF STEM inherently suffers from several issues, including a high electron-dose requirement, poor contrast for light elements, and artifacts from image-contrast nonlinearity. Here, we develop an alternative method called multislice electron tomography (MSET) based on four-dimensional STEM tilt series. In this study, our simulations show that multislice-based 3D reconstruction can effectively reduce undesirable reconstruction artifacts from the nonlinear contrast, allowing precise determination of atomic structures with improved sensitivity for low-Z elements, at considerably low electron-dose conditions. We expect that the MSET method can be applied to a wide variety of materials, including radiation-sensitive samples and materials containing light elements whose 3D atomic structures have never been fully elucidated due to electron-dose limitations or nonlinear imaging contrast.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2021

Data Needs for Modeling Low-Temperature Non-Equilibrium Plasmas: The LXCat Project, History, Perspectives and a Tutorial

Technologies based on non-equilibrium, low-temperature plasmas are ubiquitous in today’s society. Plasma modeling plays an essential role in their understanding, development and optimization. An accurate description of electron and ion collisions with neutrals and their transport is required to correctly describe plasma properties as a function of external parameters. LXCat is an open-access, web-based platform for storing, exchanging and manipulating data needed for modeling the electron and ion components of non-equilibrium, low-temperature plasmas. The data types supported by LXCat are electron- and ion-scattering cross-sections with neutrals (total and differential), interaction potentials, oscillator strengths, and electron- and ion-swarm/transport parameters. Online tools allow users to identify and compare the data through plotting routines, and use the data to generate swarm parameters and reaction rates with the integrated electron Boltzmann solver. In this review, the historical evolution of the project and some perspectives on its future are discussed together with a tutorial review for using data from LXCat.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Strong Coupling of Hydrodynamics and Reactions in Nuclear Statistical Equilibrium for Modeling Convection in Massive Stars

We build on the simplified spectral deferred corrections (SDC) coupling of hydrodynamics and reactions to handle the case of nuclear statistical equilibrium (NSE) and electron/positron captures/decays in the cores of massive stars. Our approach blends a traditional reaction network on the grid with a tabulated NSE state from a very large, ${\mathcal O }(100)$ nuclei network. We demonstrate how to achieve second-order accuracy in the simplified-SDC framework when coupling NSE to hydrodynamics, with the ability to evolve the star on the hydrodynamics time step. We discuss the application of this method to convection in massive stars leading up to core collapse. We also show how to initialize the initial convective state from a 1D model in a self-consistent fashion. All of these developments are done in the publicly available Castro simulation code and the entire simulation methodology is fully GPU-accelerated.

Explosive nucleosynthesis↗
DOE OSTI2022

Assessing models of force-dependent unbinding rates via infrequent metadynamics

Protein–ligand interactions are crucial for a wide range of physiological processes. Many cellular functions result in these non-covalent “bonds” being mechanically strained, and this can be integral to proper cellular function. Broadly, two classes of force dependence have been observed—slip bonds, where the unbinding rate increases, and catch bonds, where the unbinding rate decreases. Despite much theoretical work, we cannot predict for which protein–ligand pairs, pulling coordinates, and forces a particular rate dependence will appear. Here, we assess the ability of MD simulations combined with enhanced sampling techniques to probe the force dependence of unbinding rates. We show that the infrequent metadynamics technique correctly produces both catch and slip bonding kinetics for model potentials. We then apply it to the well-studied case of a buckyball in a hydrophobic cavity, which appears to exhibit an ideal slip bond. Finally, we compute the force-dependent unbinding rate of biotin–streptavidin. Here, the complex nature of the unbinding process causes the infrequent metadynamics method to begin to break down due to the presence of unbinding intermediates, despite the use of a previously optimized sampling coordinate. Allowing for this limitation, a combination of kinetic and free energy computations predicts an overall slip bond for larger forces consistent with prior experimental results although there are substantial deviations at small forces that require further investigation. Furthermore, this work demonstrates the promise of predicting force-dependent unbinding rates using enhanced sampling MD techniques while also revealing the methodological barriers that must be overcome to tackle more complex targets in the future.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Urban weather modeling using WRF: linking physical assumptions, code implementation, and observational needs

The Weather Research and Forecasting (WRF) model includes urban schemes that simulate the influence of urban surfaces on the atmosphere using parameterizations for flux, and radiative exchanges. Three core schemes – the Bulk urban parameterization, Single-Layer Urban Canopy Model (SLUCM), and Multi-Layer Urban Canopy Model (MLUCM) – represent increasing levels of complexity. Although the parameterizations within these urban schemes are described in the literature, their specific implementation remains poorly documented, thus slowing down model development efforts. This manuscript provides a roadmap to the three urban schemes in WRF version 4.5.2, presenting equations using the same symbols as in the model code, along with references to code lines, and including graphics and explanations that connect the code to its physical foundations. Our thorough review of the urban parameterizations implemented in WRF version 4.5.2 highlighted a handful of parameters that may introduce discontinuities in simulations: (i) in the SLUCM, a 1 mm h −1 rain rate threshold is employed to switch between two minimum moisture availability parameterizations, thus impacting latent heat flux calculations; (ii) in the SLUCM a threshold is used to partition shortwave radiation into direct and diffuse components; (iii) in all three urban schemes, the bulk Richardson number is employed to select the similarity function, which influences the vertical distribution of heat and momentum. We also identified a highly simplified treatment of the radiative balance on roof surfaces. The implications of these simplifications can be assessed through targeted observations across relevant conditions, including varying precipitation rates, cloud cover, and transitions between stability regimes. Furthermore, the widespread application of the Monin-Obukhov similarity theory in these urban schemes warrants model evaluation under highly stable and unstable conditions and in heterogeneous urban settings with variable land cover and building heights on scales finer than model resolution. To address these challenges, we offer guidance on observational strategies, emphasizing the need for multi-parametric measurements to capture potential compensating biases and multi-height measurements that align with the levels where quantities are diagnostic and prognosed in the model (i.e., the lowest atmospheric level of the WRF model). Finally, our inspection of the code revealed implementation bugs that have now been corrected in WRF versions 4.6.0 and 4.6.1. Sensitivity tests over the Atlanta urban area show that these corrections affect surface temperatures, underscoring the importance of performing rigorous documentation and verification of the implementation of parameterizations in model code.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

On the numerical sensitivity of cellular automata grain structure predictions to large thermal gradients and cooling rates

Cellular automata (CA) models of as-solidified grain structure, originally developed and applied to casting, have become a common means of predicting grain structure resulting from Additive Manufacturing (AM) processes. The majority of these models are based on the decentered octahedron approach, which attempts to correct for the effect of grid anisotropy on the prediction of competitive solidification of dendritic grains. However, AM solidification occurs under cooling rates ($\dot{T}$) and thermal gradients (G) that are orders of magnitude larger than those encountered in casting, and no systematic investigation on the effect of the CA model cell size (Δx) and time step (Δt) on AM microstructure predictions has been performed. Here, in this study, such an investigation is first performed via simulation of individual grains of various crystallographic orientations with a fixed, unidirectional G, showing that CA prediction of the steady-state undercooling matched the expected values based on the interfacial response function at small G and deviated from the expected values at large G. Simulation of competitive growth of multiple grains showed a weakening of the predicted texture as G and Δx became large. Simulation of solidification under AM conditions, where G and $\dot{T}$ vary spatially across the melt pools, showed that not only does grain selection weaken and deviate from expectations at large Δx, but grains with crystallographic $\langle$100$\rangle$ aligned with the grid directions are more adversely affected by the temperature field discontinuities than grains with other crystallographic orientations. Despite the fact that the exact grain competition results depended on Δt, the overall texture development was notably less sensitive to Δt than Δx, provided that a reasonable value of Δt is selected based on the ratio of Δx to the maximum local solidification velocity in the simulation domain. Finally, from the directional solidification and AM simulation results, an analysis of computational cost compared to simulation resolution is performed based on an equation derived to quantify the relatively inaccuracy in grain selection based on the model and temperature field inputs. From this analysis, it is concluded that there is a need for algorithmic improvements to improve CA grain competition accuracy for large G processing conditions as sufficiently small Δx to resolve the necessary competition is intractable for many AM processing conditions.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Asynchronous distributed-memory task-parallel algorithm for compressible flows on unstructured 3D Eulerian grids

Here, we discuss the implementation of a finite element method, used to numerically solve the Euler equations of compressible flows, using an asynchronous runtime system (RTS). The algorithm is implemented for distributed-memory machines, using stationary unstructured 3D meshes, combining data-, and task-parallelism on top of the Charm++ RTS. Charm++’s execution model is asynchronous by default, allowing arbitrary overlap of computation and communication. Task-parallelism allows scheduling parts of an algorithm independently of, or dependent on, each other. Built-in automatic load balancing enables continuous redistribution of computational load by migration of work units based on real-time CPU load measurement. The RTS also features automatic checkpointing, fault tolerance, resilience against hardware failure, and supports power-, and energy-aware computation. We demonstrate scalability up to 25 x 10 9 cells at $\mathscr{O}$10 4 compute cores and the benefits of automatic load balancing for irregular workloads. The full source code with documentation is available at https://quinoacomputing.org.

42 ENGINEERING↗
DOE OSTI2020

Analysis of the performance of different culvert boundary conditions in 2D shallow flow models

Culverts allow roads to safely traverse small streams or drainage ditches, and their proper design is critical to ensure a safe and reliable transportation network. A correct modelization of these hydraulic structures becomes crucial in the assessment of flood footprints or discharge peak estimation in a risk evaluation plan. The question of how to include culverts comes up frequently when assembling a hydraulic model that requires the presence of as many singular elements as possible. In this work, three different culvert integrations with the surface domain are studied and compared in the context of a 2D shallow water (SW) model. All of them are based on the Federal Highway Administration (FHWA) formulation for the culvert discharge estimation but differ in complexity and in the interaction with the numerical model for surface flow, some of them as internal boundary conditions. Several steady and unsteady validation test cases are presented and the numerical results are compared with the predictions from HEC-RAS 1D and HY-8 software. Furthermore, the culvert area, shape and their sensitivity to the 2D computational mesh is also analyzed.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Multigrid Reduction in Time for Chaotic and Hyperbolic Problems (Final Report)

The coming massive parallelism of exascale computing presents a pressing challenge for the many DOE simulations of time-dependent partial differential equations (PDEs), which typically use traditional sequential time stepping methods. Since this traditional approach is inherently serial, it presents a sequential bottleneck when moving to exascale computing, because future performance gains will come through greater concurrency, not faster clock speeds. Thus, the goal of this work is to research parallelism in time, i.e., methods that compute multiple time values simultaneously, not sequentially. The focus will be on hyperbolic and chaotic problems of interest to DOE, with the goal of enabling scalable simulations of time-dependent hyperbolic and chaotic problems on future architectures. The chosen methodology for solving these problems parallel-in-time is multigrid, because multigrid (when it works) is a powerful, optimal, and scalable solver for discretized PDEs. Multigrid is already commonly used in many DOE simulations for scalably and optimally solving space-only PDE problems. The areas of hyperbolic and chaotic problems are chosen because of their relevance to problems of programmatic interest to DOE. However, these problems are also well-known to be difficult for parallelin-time methods, with the most common method, parareal, diverging in many cases. The current state-of-the-art for parallel-in-time at LLNL is the multigrid reduction in time (MGRIT) XBraid package, which also struggles for such problems, while still showing some improvement over parareal. In summary, new methods are needed for an efficient parallel-in-time scheme for hyperbolic and chaotic problems, and this work shall research promising new multigrid methods in this area. In particular, this work shall continue researching the directions from the current collaboration with Dr. Falgout, which are laid out in the work Toward Parallel in Time for Chaotic Dynamical Systems and showed the first known results of a parallel-in-time speedup for a chaotic problem. This work outlines two key improvements to XBraid for chaotic problems, the so-called “theta” and “delta-correction” methods. Here, these two improvements will be implemented in a high-performance but general way in XBraid and explored for more complicated problems. We will additionally research, as time allows, improvements to these techniques, as well as multigrid relaxation techniques based on Least Squares Shadowing (LSS by Wang) and a nonintrusive block tridiagonal solver based on MGRIT, called TriMGRIT.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

Multigrid Reduction in Time for Chaotic and Hyperbolic Problems (Final Report)

The coming massive parallelism of exascale computing presents a pressing challenge for the many DOE simulations of time-dependent partial differential equations (PDEs), which typically use traditional sequential time stepping methods. Since this traditional approach is inherently serial, it presents a sequential bottleneck when moving to exascale computing, because future performance gains will come through greater concurrency, not faster clock speeds. Thus, the goal of this work is to research parallelism in time, i.e., methods that compute multiple time values simultaneously, not sequentially. The focus will be on hyperbolic and chaotic problems of interest to DOE, with the goal of enabling scalable simulations of time-dependent hyperbolic and chaotic problems on future architectures. The chosen methodology for solving these problems parallel-in-time is multigrid, because multigrid (when it works) is a powerful, optimal, and scalable solver for discretized PDEs. Multigrid is already commonly used in many DOE simulations for scalably and optimally solving space-only PDE problems. The areas of hyperbolic and chaotic problems are chosen because of their relevance to problems of programmatic interest to DOE. However, these problems are also well-known to be difficult for parallel-in-time methods, with the most common method, parareal, diverging in many cases. The current state of-the-art for parallel-in-time at LLNL is the multigrid reduction in time (MGRIT) XBraid package, which also struggles for such problems, while still showing some improvement over parareal. In summary, new methods are needed for an efficient parallel-in-time scheme for hyperbolic and chaotic problems, and this work shall research promising new multigrid methods in this area. In particular, this work shall continue researching the directions from the current collaboration with Dr. Falgout, which are laid out in the work Toward Parallel in Time for Chaotic Dynamical Systems and showed the first known results of a parallel-in-time speedup for a chaotic problem. This work outlines two key improvements to XBraid for chaotic problems, the so-called “theta” and “delta-correction” methods. Here, these two improvements will be further researched and improved (including with a new relaxation method inspired by on Least Squares Shadowing (LSS)) and explored for more complicated problems.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

Constraining gravity with a new precision 𝐸 𝐺 estimator using Planck + SDSS BOSS data

The 𝐸 𝐺 statistic is a discriminating probe of gravity developed to test the prediction of general relativity (GR) for the relation between gravitational potential and clustering on the largest scales in the observable Universe. We present a novel high-precision estimator for the 𝐸 𝐺 statistic using CMB lensing and galaxy clustering correlations that carefully matches the effective redshifts across the different measurement components to minimize corrections. A suite of detailed tests is performed to characterize the estimator’s accuracy, its sensitivity to assumptions and analysis choices, and the non-Gaussianity of the estimator’s uncertainty is characterized. After finalization of the estimator, it is applied to Planck CMB lensing and SDSS CMASS and LOWZ galaxy data. We report the first harmonic space measurement of 𝐸 𝐺 using the LOWZ sample and CMB lensing and also updated constraints using the final CMASS sample and the latest Planck CMB lensing map. We find $\hat{𝐸}$$^{Planck+CMASS}_{𝐺}$ = 0.3⁢6$^{+0.06}_{−0.05}$⁢(68.27%) and $\hat{𝐸}$$^{Planck+LOWZ}_{𝐺}$ = 0.4⁢0$^{+0.11}_{−0.09}$⁢(68.27%), with additional subdominant systematic error budget estimates of 2% and 3%, respectively. Using Ω m,0 constraints from Planck and SDSS BAO observations, Λ⁢CDM-GR predicts 𝐸$^{GR}_ {𝐺}$⁡(𝑧 =0.555) = 0.401 ± 0.005 and 𝐸$^{GR}_{𝐺}$⁡(𝑧 =0.316) = 0.452 ± 0.005 at the effective redshifts of the CMASS and LOWZ based measurements. We report the measurement to be in good statistical agreement with the Λ⁢CDM-GR prediction and report that the measurement is also consistent with the more general GR prediction of scale independence for 𝐸 𝐺 . Furthermore, this work provides a carefully constructed and calibrated statistic with which 𝐸 𝐺 measurements can be confidently and accurately obtained with upcoming survey data.

79 ASTRONOMY AND ASTROPHYSICS↗