Search NASA⌕ Search

SEARCH · Search NASA

Results for “Cycles”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
NASA NTRS2018

Influence of Fiber Content, Thermal Cycles and Creep on Electrical Resistivity Measurements of SiCf/SiC Minicomposites

Fiber-reinforced Ceramic Matrix Composites (CMCs) are currently being used in high-temperature applications such as jet engine components. In such extreme environment applications, materials are exposed to many mechanical and thermal loading cycles during the life of the component. This exposure can degrade the component, and thus, components need to be monitored and inspected during service. The electrical resistivity nondestructive evaluation technique has been shown to be very sensitive to damage in CMCs, and although its performance is highly dependent on temperature, this temperature-dependence is still not well understood. Therefore, this current study aims to establish the influence of thermal cycles, creep, CVI-SiC matrix cracks and fiber volume fraction on the electrical resistance of Hi Nicalon and Hi-Nicalon Type S SiC fiber-reinforced minicomposites with BN interphases. Minicomposites with 97% CVI-SiC matrix volume fraction were used to characterize the electrical resistivity of the CVI-SiC matrix. Next, models were constructed to calculate fiber resistivity and onset and evolution of damage during tensile testing at room-temperature. The thermal cycles were achieved by heating as-received and precracked specimens to 1200°C and then cooling them to room temperature, with or without applied stress on fibers.

creep↗
NASA NTRS2018

Extratropical Cyclone Precipitation Life Cycles: A Satellite-Based Analysis

Although extratropical cyclones are the most common midlatitude storms, the relationship between their precipitation life cycle and dynamical strength life cycle has not been thoroughly analyzed. Given that thermodynamic heat exchanges associated with precipitation impact cyclone circulation, there is a need to understand the precipitation/dynamics relationship. Based on Integrated MultisatellitE Retrievals for Global Precipitation MeasurementGPM precipitation and Lagrangian cyclone tracks, the precipitation maximum occurs prior to the dynamical strength maximum 70% of the time. The lag in timing is consistent with the difference in cyclone precipitable water vapor at the two peaks. Conditional subsetting of the cyclone composites shows that if the precipitable water vapor distribution is constrained to be equal throughout the composite life cycle, the precipitation peak occurs very near the time of the peak in cyclone dynamical strength. Thus, the boost in dynamical strength caused by latent heat associated with precipitation manifest itself with little to no time lag.

Extratropical cyclone↗
NASA NTRSDate not supplied

Learning From Failure: Boosting Cycling Endurance of Optical Phase Change Materials

Chalcogenide phase change materials (PCMs) are a unique class of compounds whose switchable optical and electronic properties have fueled an explosion of emerging applications in microelectronics and microphotonics. Key to any application is the ability of PCMs to reliably switch between crystalline and amorphous states over a large number of cycles. While this issue has been extensively studied in the case of microelectronic memories, current PCM-based optical devices suffer from much inferior endurance. To understand the failure mechanisms limiting endurance of PCMs specifically in microphotonic devices, we have developed an on-chip resistive micro-heater platform and an automatic multi-modal characterization system to analyze cycling performance of optical PCMs. Reversible switching of large-area PCM devices over 50,000 cycles was demonstrated.

Optical phase change material↗
NASA NTRSDate not supplied

Teal Cycle Ergometer Vibration Isolation and Stabilization System Human-in-the-Loop Ground Evaluation for Long-Duration Spaceflight

Purpose: To counter the deleterious effects of weightlessness on the cardiopulmonary system, astronauts living on the International Space Station exercise on a variety of countermeasure equipment including the Cycle Ergometer Vibration Isolation and Stabilization System (CEVIS). Operational since 2001, the onboard CEVIS will be replaced by a new model, known as Teal CEVIS (TC). As a part of ground evaluation, TC hardware underwent human-in-the-loop (HITL) testing to verify the TC hardware produces workloads that elicit physiologic responses comparable to a laboratory cycle ergometer (LAB). Methods: Seven subjects (5 M/2 F) performed submaximal cycle ergometer testing with indirect calorimetry measures on TC and LAB on separate test days. Testing consisted of graded 30 watt increases in workload until subjects reached 85% of age-predicted max heart rate (HR). Exercise outcomes included rate of oxygen uptake (VO2; liters/min), rate of energy expenditure (REE; kcal/min), and HR (beats/min). Linear mixed models (LMM) were fitted to compare VO2, REE, and HR responses between devices across power outputs with fixed effects for power (P) and device (D) and with random effects for subject. LMM effect coefficients (β), std errors (SE), pseudo-partial R2 of effects (pR2), and model likelihood ratio statistics (χ2, Pr(> chisq); α<.05) are provided. Results: LMM main effects for P and D were observed for VO2 (βp=.0107, SE = .0002, pR2=0.97; βd = -0.075, SE = 0.019, pR2=0.14; χ2(1)= 13.57, p<.001), such that VO2 was higher across stages on TC. Main effects of P and D were observed for REE (βp= .0586, SE = 0.001, pR2= 0.97; βd = -0.33208, SE = 0.099, pR2= 0.056; χ2(1)=10.481, p < .01), such that REE was higher across power outputs on TC. A P x D interaction was observed for HR, along with main effects for P and D (βp x d =-0.048, SE = 0.02, pR2=0.048; βp= 0.42, SE = 0.016, pR2=0.87; χ2(1) = 5.398, p = 0.02), such that higher workloads elicited a greater difference in HR between devices. Conclusions: HITL results show, TC elicits greater physiologic responses across power outputs compared to LAB. However, pR2 for device effects show small differences between devices. Therefore, TC can be expected to provide appropriate physiological stimulus across workloads and be considered a reliable tool to mitigate the effects of weightlessness.

Cycle Ergometer Vibration and Isolation System↗
NASA NTRS2024

Life Cycle Assessment and Design of LignoBlock: A Lignin Bound Block on the Path Towards a Green Transition of the Construction Industry

Lignin-based biopolymer-bound soil composites (BSCs) are a new class of sustainable construction materials that utilize a bio-based biopolymer — lignin — as a binder. Prior use of lignin suggests that lignin is a promising candidate for the development of bio-based construction materials. Inspired by these applications, lignin-based BSCs were developed using lignoboost lignin, lignoforce lignin, alkali lignin, and hydrolysis lignin. Uni-axial compressive testing of lignin-based BSC shows that the compressive strength for these BSCs range from 1.6–8.1 MPa, which makes them appropriate for low compressive strength construction applications. We performed a life cycle assessment (LCA) of lignin-based BSC, with the functional unit being a CMU-sized block ( V =6423 cm -3 ). The major advantage of BSC lies in the elimination of ordinary portland cement, which is common to many construction materials, including many forms of concrete. Furthermore, the use of lignin in lignin-based BSC results in carbon sequestration (lignin ≈ 60 wt% carbon), potentially making construction materials made from lignin-based BSC carbon negative. Additionally, a design guide for estimating the life cycle carbon footprint of lignin-based BSC for a required compressive strength was developed. By utilizing the results from material tests and the LCA, designers are now able to use lignin effectively in construction applications, as they can now design lignin-based BSC for a target compressive strength with a full understanding of the life cycle carbon footprint implications.

Lignin↗
NASA NTRS1971

Effect of load voltage on thin film cuprous sulfide: Cadmium sulfide solar cells thermally cycled in a simulated space environment

Thin-film Cu2S-CdS solar cells, loaded at various fixed values of load resistance, were thermally cycled for 1429 cycles in a simulated space environment. Cell performance was measured under controlled conditions in air before and after thermal cycling. These data were used to determine the effect of load voltage on cell performance. The performance of the cells was relatively independent of load voltage up to about 0.39 volt. This appears to be a threshold voltage, beyond which there was a significant loss in cell performance. Fortunately, this threshold voltage appears to be sufficiently higher than the maximum power voltage of 0.33 volt so that it can be avoided in most applications.

Smithrick, J. J.↗
NASA NTRS1972

The significant solar proton events in 20th solar cycle for the period October 1964 to March 1970

Solar proton data are presented from observations by the Explorer 21, 28, 34 and 41 satellites. The NASA Solar Particle Alert Network (SPAN) solar optical and radio frequency data for the period May 1967 to March 1970 are associated with the proton events observed by the Explorer 34 and 41 satellites; however, missing data are supplemented with data recorded at other international observatories. From a radiation hazard standpoint, NASA is concerned with solar proton events of the order of 10 to the 8th power proton/sq cm. Radiation dose data are presented for some of the large proton events that have occurred thus far in the 20th solar cycle and are compared with some of the large proton events of the 19th solar cycle. Finally, the results of a simple parametric correlation study are presented for both the 19th and 20th solar cycles.

Atwell, W.↗
NASA NTRS1970

Optimum outgassing cycles for aluminum and stainless steel

Outgassing rates were measured for a modified 7075T6 aluminum and 304L stainless steel, for two degrees of finish, at temperatures of 285 deg F to 392 deg F, for times of 0.5 to 72 hours. The results were analyzed to determine optimum time and temperature cycles for outgassing. Optimum cycles were determined with and without the limitations of a graph. The graph related allowable time at temperature to a 5 percent or less reduction in room temperature properties of 7075T6 aluminum. For aluminum, within the limits set by reduction in mechanical properties, the optimum cycle tested was 40 hours at 285 deg F. Disregarding the limits, optimum outgassing was achieved at the highest temperatures and longest times tested, for both aluminum and stainless steel.

Garrison, R. L.↗
NASA NTRS1972

Ground and flight test methods for determining limit cycle and structural resonance characteristics of aircraft stability augmentation systems

Performance criteria and test techniques are applied to stability augmentation systems (SAS) during ground testing to predict objectionable limit cycles and preclude structural resonance during flight. Factors that give rise to these problems, means of suppressing their effects, trade-offs to be considered, and ground test methods that have been developed are discussed. SAS performance predicted on the basis of these tests is compared with flight data obtained from three lifting body vehicles and the X-15 research airplane. Limit cycle and structural resonance test criteria, based upon ground and flight experience and data, were successfully applied to these vehicles. The criteria used were: The limit cycle amplitude (SAS gain multiplied by peak-to-peak angular rate) shall not exceed 0.5 deg for the highest product of control power and SAS gain that will be used in flight; the maximum in-flight SAS gain should never exceed 50 percent of the value at which a structural resonance can be sustained during ground test.

Painter, W. D.↗
NASA NTRS1972

Analytical and experimental investigation of aircraft metal structures reinforced with filamentary composites. Phase 2: Structural fatigue, thermal cycling, creep, and residual strength

Specimens representative of metal aircraft structural components reinforced with boron filamentary composites were manufactured and tested under cyclic loading, cyclic temperature, or continuously applied loading to evaluate some of the factors that affect structural integrity under cyclic conditions. Bonded, stepped joints were used throughout to provide composite-to-metal transition regions at load introduction points. Honeycomb panels with titanium or aluminum faces reinforced with unidirectional boron composite were fatigue tested at constant amplitude under completely reversed loading. Results indicated that the matrix material was the most fatigue-sensitive part of the design, with debonding initiating in the stepped joints. However, comparisons with equal weight all-metal specimens show a 10 to 50 times improved fatigue life. Fatigue crack propagation and residual strength were studied for several different stiffened panel concepts, and were found to vary considerably depending on the configuration. Composite-reinforced metal specimens were also subjected to creep and thermal cycling tests. Thermal cycling of stepped joint tensile specimens resulted in a ten percent decrease in residual strength after 4000 cycles.

Blichfeldt, B.↗
NASA NTRS1972

Sleep-wake cycle of an unrestrained isolated chimpanzee under entrained and free running conditions.

Biorhythmic patterns of EEG activity - the sleep-wake cycle and the sleep cycle - were investigated in an unrestrained chimpanzee subjected to 30 days of isolation in a 4-ft cubical cage placed in a high performance sound isolation chamber. The animal received 10 days of 12 hours of light and 12 hours of dark, then 10 days of continuous light, followed by 10 more days of 12 hours of light and 12 hours of dark. The circadian sleep-wake rhythm and the wake and sleep phases of this rhythm during entrained and free running conditions were analyzed in terms of duration. The awake and nonREM sleep and REM sleep stages were also analyzed. In addition, the mean duration of the sleep cycle of the sleep phase was computed.

Mcnew, J. J.↗
NASA NTRS1971

The role of creep in high temperature low cycle fatigue.

The significance of the role that creep can play in governing high-temperature, low-cycle fatigue resistance is investigated by conducting strain cycling tests on two high-temperature stainless steel alloys and making concurrent measurements of stress, temperature, and strain at various frequencies. The results are then analyzed in terms of damage imposed by creep and fatigue components. It is shown that creep can play an important and sometimes dominant role in low cycle fatigue at high temperatures. The results of the study include the findings that: (1) the simple life-fraction theory described is adequate for calculating creep damage when the cyclic creep rupture curve is used as a basis for analysis; (2) a method of universal slopes originally developed for room temperature use is sufficiently accurate at high temperature to be used to calculate pure fatigue damage; and (3) a linear creep-fatigue damage rule can explain the transitions observed from one failure mode to another.

Manson, S. S.↗
NASA NTRS1973

The effect of thermal cycling on the structure and properties of a Co, Cr, Ni-TaC directionally solidified eutectic composite

A Co, Cr, Ni-TaC directionally solidified eutectic composite was subjected to thermal fatigue between 427-1093°C. The material suffered degradation in microstructure and elevated temperature mechanical properties. The loss in properties varied with the maximum cycling temperature and number of cycles. This behavior is attributed to the increasing solubility of the TaC in the matrix with temperature from 0.4% at room temperature to 2.2% at 1200°C. During the thermal cycling, the TaC is subjected to solution and reprecipitation which form serrations on the fibers since the easy growth planes of the TaC are not coincident with the fiber faces exposed to the matrix.

Composites↗
NASA NTRS1973

High temperature, low-cycle fatigue of copper-base alloys in argon. Part 2: Zirconium-copper at 482, 538 and 593 C

Zirconium-copper (1/2 hard) was tested in argon over the temperature range from 482 to 593 C in an evaluation of short-term tensile and low-cycle fatigue behavior. The effect of strain rate on the tensile properties was evaluated at 538 C and in general it was found that the yield and ultimate strengths increased as the strain rate was increased from 0.0004 to 0.01/sec. Ductility was essentially insensitive to strain rate in the case of the zirconium-copper alloy. Strain-rate and hold-time effects on the low cycle fatigue behavior of zirconium-copper were evaluated in argon at 538 C. These effects were as expected in that decreased fatigue life was noted as the strain rate decreased and when hold times were introduced into the tension portion of the strain-cycle. Hold times in compression were much less detrimental than hold times in tension.

Conway, J. B.↗
NASA NTRS1972

Evaluation testing of a closed Brayton-cycle electrical-power-conversion system.

Description of the design and testing of a recuperated, closed Brayton-cycle, electrical power conversion system designated the Brayton Cycle Demonstrator (BCD). The system uses electrical heaters as a heat source, argon as the cycle working fluid, and gas-lubricated foil-type bearings. Objectives of the test program include (1) evaluation of the overall system performance characteristics and influences on spacecraft integration, (2) familiarization of personnel with operational methods, and (3) determination of system flexibility by operating at a number of off-design conditions. Results obtained to date are discussed.

Redding, T. E.↗
NASA NTRS1972

The effects of high-temperature brazing and thermal cycling on the mechanical properties of Hastelloy X

Data are presented on the effects of brazing alloy, brazing operation, thermal cycling, and combinations of these on the yield strength, elongation, tensile strength, and fatigue life of thin gage Hastelloy X. These data show that brazing at 1461 K (2170 F) with a Ni-Pd-Au alloy and subsequent exposure to 200 service thermal cycles between 533 and 1144 K (500 and 1600 F) result in reduction of as much as 39 percent in yield strength, 33 percent in elongation, 14 percent in tensile strength, and 26 percent in fatigue limit of Hastelloy X, as compared to as-received materials. These property losses are primarily caused by the brazing operation rather than the subsequent service thermal cycles.

Dicus, D. L.↗
NASA NTRS1974

A note on the annual cycles of surface heat balance and temperature over a continent

A surface heating function, defined as the ratio of the time derivative of the mean annual temperature curve to the surface heat balance, is computed from the annual temperature range and heat balance data for the North American continent. An annual cycle of the surface heat balance is then reconstructed from the surface heating function and the annual temperature curve, and an annual cycle of evaporative plus turbulent heat loss is recomputed from the annual cycles of radiation balance and surface heat balance for the continent. The implications of these results for long range weather forecasting are discussed.

Spar, J.↗
NASA NTRS1973

Elastic properties of granular materials under uniaxial compaction cycles

Data on andesitic and basaltic sands are presented showing compressional sound velocity, density, and creep as functions of uniaxial loading through several compaction cycles. Maximum pressures over which acoustic measurements were made were in the range from 600 to 700 bars. The dynamic elastic modulus varies with pressure in a manner analogous to that of a static elastic modulus defined by small pressure perturbations on a typical compaction cycle. After several compaction cycles, two compressional elastic moduli apparently exist at low pressure (thus two modes of compressional wave propagation through the samples are indicated). The elastic moduli observations are briefly discussed in terms of a general expression for compressibility.

Warren, N.↗