SEARCH · Search NASA

Results for “D”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

All sources NASA NTRS DOE OSTI

NASA NTRS1992

Model capabilities, 2-D

Two dimensional (2-D) atmospheric models provide results for altitude versus latitude as a function of time and are developed primarily for two reasons: to help understand atmospheric occurrences and to give assessments and/or make predictions of future changes in the atmosphere. Historically, the formulation of transport in 2-D models has been a difficult problem. Most current 2-D models have a transport that is either an Eulerian mean circulation with large stratospheric eddy diffusion or a residual (diabatic or Lagragian) mean circulation which typically is accompanied with small stratospheric eddy diffusion. Because of the assumption of zonal averaging, 2-D models are primarily useful in making predictions of atmospheric changes of time scales longer than a season. Although decadel atmospheric changes may be reasonably well represented with a 2-D model, the year to year changes which result from interannual transport differences, stratospheric warmings, semiannual oscillations, or quasi-biennial oscillations may not be well represented in the stratosphere and troposphere.

Jackman, Charles H.↗

NASA NTRS1995

Mineralogic variations in fluvial sediments contaminated by mine tailings as determined from AVIRIS data, Coeur D'Alene River Valley, Idaho

The success of imaging spectrometry in mineralogic mapping of natural terrains indicates that the technology can also be used to assess the environmental impact of human activities in certain instances. Specifically, this paper describes an investigation into the use of data from the Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) for mapping the spread of, and assessing changes in, the mineralogic character of tailings from a major silver and base metal mining district. The area under investigation is the Coeur d'Alene River Valley in northern Idaho. Mining has been going on in and around the towns of Kellogg and Wallace, Idaho since the 1880's. In the Kellogg-Smelterville Flats area, west of Kellogg, mine tailings were piled alongside the South Fork of the Coeur d'Alene River. Until the construction of tailings ponds in 1968 much of these waste materials were washed directly into the South Fork. The Kellogg-Smelterville area was declared an Environmental Protection Agency (EPA) Superfund site in 1983 and remediation efforts are currently underway. Recent studies have demonstrated that sediments in the Coeur d'Alene River and in the northern part of Lake Coeur d'Alene, into which the river flows, are highly enriched in Ag, Cu, Pb, Zn, Cd, Hg, As, and Sb. These trace metals have become aggregated in iron oxide and oxyhydroxide minerals and/or mineraloids. Reflectance spectra of iron-rich tailing materials are shown. Also shown are spectra of hematite and goethite. The broad bandwidth and long band center (near 1 micron) of the Fe(3+) crystal-field band of the iron-rich sediment samples combined with the lack of features on the Fe(3+) -O(2-) charge transfer absorption edge indicates that the ferric oxide and/or oxyhydroxide in these sediments is poorly crystalline to amorphous in character. Similar features are seen in poorly crystalline basaltic weathering products (e.g., palagonites). The problem of mapping and analyzing the downriver occurrences of iron rich tailings in the Coeur d'Alene (CDA) River Valley using remotely sensed data is complicated by the full vegetation cover present in the area. Because exposures of rock and soil were sparse, the data processing techniques used in this study were sensitive to detecting materials at subpixel scales. The methods used included spectral mixture analysis and a constrained energy minimization technique.

Farrand, W. H.↗

NASA NTRS1995

Analysis of corner cracks at hole by a 3-D weight function method with stresses from finite element method

Stress intensity factors for quarter-elliptical corner cracks emanating from a circular hole are determined using a 3-D weight function method combined with a 3-D finite element method. The 3-D finite element method is used to analyze uncracked configuration and provide stress distribution in the region where crack is to occur. Using this stress distribution as input, the 3-D weight function method is used to determine stress intensity factors. Three different loading conditions, i.e. remote tension, remote bending and wedge loading, are considered for a wide range in geometrical parameters. The significance in using 3-D uncracked stress distribution and the difference between single and double corner cracks are studied. Typical crack opening displacements are also provided. Comparisons are made with solutions available in the literature.

Zhao, W.↗

NASA NTRS1995

An aspect ration bound for triangulating a d-grid cut by a hyperplane

We consider the problem of triangulating a d-dimensional uniform grid of d-cubes that is cut by a k-dimensional affine subspace. The goal is to obtain a triangulation with bounded aspect ratio. To achieve this goal, we allow some of the box faces near the affine subspace to be displaced. This problem has applications to finite element mesh generation. For general d and k, the bound on aspect ratio that we attain is double-exponential in d. For the important special case of d = 3, the aspect ratio bound is small enough that the technique is useful in practice.

Mitchell, Scott A.↗

NASA NTRS2002

Dynamical Effects on the Escape of H and D: Martian Water Reservoirs

The evolution of water on Mars is dependent on the loss rates of H and D from its atmosphere, where the dominant loss mechanism for these constituents is Jeans escape. Throughout time, preferential escape of H over D has produced a deuterium rich atmosphere with a D/H ratio 5.2 times that of terrestrial water. Motion in the atmosphere of Mars is shown to change the Jeans escape rates of H and D in two important ways: (1) Atmospheric wind and rotation at the exobase increase the escape fluxes of H and D above the corresponding Jeans fluxes. (2) The percentage increase in escape flux due to motion is greatest for D. Recently, several models have been used to estimate the magnitudes of current and ancient crustal water reservoirs on Mars that freely exchange with its atmosphere. Differences in the reservoir sizes are influenced by differences in the composition at the exobase, thermal history of the atmosphere and the D/H ratio of earlier epochs as inferred from meteorites. When motion enhanced Jeans escape is applied to each of these models, it is shown in every case that factors (1) and (2) above lead to current and ancient crustal water reservoirs that are larger than those obtained without motion.

Hartle, Richard E.↗

NASA NTRS2004

High Salt Intake Promotes Urinary Loss of Vitamin D Metabolites by Dahl Salt-Sensitive Rats in a Space Flight Model

Vitamin D metabolism in the Dahl salt-sensitive (S) rat, a model of salt-induced hypertension, differs from that in the Dahl salt-resistant (R) rat. We have demonstrated that female S rats are more vulnerable than female R rats to decreases in plasma 25-hydroxyvitamin D (25-OHD) and 1,25-dihydroxyvitamin D (1,25-(OH)2D) concentrations during hind limb unloading (a space flight model). We report here on the response of the vitamin D endocrine system of S and R rats to hind limb unloading during high salt intake. Dahl female rats (9.7-week-old) were tail-suspended (hind limb unloaded) for 28 days, while fed a diet containing twice the salt in standard rat chow (2 % sodium chloride). Control rats were fed the same diet, but were not hind limb unloaded. Vitamin D metabolites were analyzed by HPLC and radioimmunoassay kits from Diasorin.

Thierry-Palmer, M.↗

NASA NTRS2006

Studying Host-Pathogen Interactions In 3-D: Organotypic Models For Infectious Disease And Drug Development

Representative, reproducible and high-throughput models of human cells and tissues are critical for a meaningful evaluation of host-pathogen interactions and are an essential component of the research developmental pipeline. The most informative infection models - animals, organ explants and human trials - are not suited for extensive evaluation of pathogenesis mechanisms and screening of candidate drugs. At the other extreme, more cost effective and accessible infection models such as conventional cell culture and static co-culture may not capture physiological and three-dimensional aspects of tissue biology that are important in assessing pathogenesis, and effectiveness and cytotoxicity of therapeutics. Our lab has used innovative bioengineering technology to establish biologically meaningful 3-D models of human tissues that recapitulate many aspects of the differentiated structure and function of the parental tissue in vivo, and we have applied these models to study infectious disease. We have established a variety of different 3-D models that are currently being used in infection studies - including small intestine, colon, lung, placenta, bladder, periodontal ligament, and neuronal models. Published work from our lab has shown that our 3-D models respond to infection with bacterial and viral pathogens in ways that reflect the infection process in vivo. By virtue of their physiological relevance, 3-D cell cultures may also hold significant potential as models to provide insight into the neuropathogenesis of HIV infection. Furthermore, the experimental flexibility, reproducibility, cost-efficiency, and high throughput platform afforded by these 3-D models may have important implications for the design and development of drugs with which to effectively treat neurological complications of HIV infection.

Nickerson, Cheryl A.↗

NASA NTRS2008

NanoSail-D

The "NanoSail-D" mission is currently scheduled for launch onboard a Falcon-1 Launch Vehicle in the early June 2008 timeframe. The NanoSail-D spacecraft will consist of a solar sail subsystem stowed in a 2U volume and a 1U spacecraft bus, provided by Ames Research Center. The primary objectives of the NanoSail-D technology demonstration mission are to fabricate, stow and deploy on-orbit a solar sail and perform a de-orbit maneuver to demonstrate a potential orbital debris mitigation technology. The NanoSail-D mission is being developed through a collaborative effort between the NASA Marshall Space Flight Center and the NASA Ames Research Center Small Spacecraft Office. Details of the NanoSail-D system will be presented, including: 1) design details of the solar sail reflective membrane quadrants, gossamer booms, deployment system and passive attitude control system, 2) design analysis results including structural, thermal, environmental, orbital debris and safety, and 3) test results including deployment, ascent venting, launch vibration and PPOD integration verification.

Montgomery, Edward E., IV↗

NASA NTRS2009

NanoSail-D: A Solar Sail Demonstration Mission

During the past decade, within the United States, NASA Marshall Space Flight Center (MSFC) was heavily engaged in the development of revolutionary new technologies for in-space propulsion. One of the major in-space propulsion technologies developed was a solar sail propulsion system. Solar sail propulsion uses the solar radiation pressure exerted by the momentum transfer of reflected photons to generate a net force on a spacecraft. To date, solar sail propulsion systems have been designed for large spacecraft in the tens to hundreds of kilograms mass range. Recently, however, MSFC has been investigating the application of solar sails for small satellite propulsion. Likewise, NASA Ames Research Center (ARC) has been developing small spacecraft missions that have a need for amass-efficient means of satisfying deorbit requirements. Hence, a synergistic collaboration was established between these two NASA field Centers with the objective of conducting a flight demonstration of solar sail technologies for small satellites. The NanoSail-D mission flew onboard the ill-fated Falcon Rocket launched August 2, 2008, and, due to the failure of that rocket, never achieved orbit. The NanoSail-D flight spare is ready for flight and a suitable launch arrangement is being actively pursued. Both the original sailcraft and the flight spare are hereafter referred to as NanoSail-D. The sailcraft consists of a sail subsystem stowed in a three-element CubeSat. Shortly after deployment of the NanoSail-D, the solar sail will deploy and mission operations will commence. This demonstration flight has two primary technical objectives: (1) to successfully stow and deploy the sail and (2) to demonstrate deorbit functionality. Given a near-term opportunity for launch on Falcon, the project was given the challenge of delivering the flight hardware in 6 mo, which required a significant constraint on flight system functionality. As a consequence, passive attitude stabilization of the spacecraft will be achieved using permanent magnets to detumble and orient the body with the magnetic field lines and then rely on atmospheric drag to passively stabilize the sailcraft in an essentially maximum drag attitude. This paper will present an introduction to solar sail propulsion systems and an overview of the NanoSail-D spacecraft.

Johnson, Les↗

NASA NTRS2011

Nanosail-D: The Small Satellite That Could!

Three years from its initial design review, NanoSail-D successfully deployed its sail on January 20th, 2011. It became the first solar sail vehicle to orbit the earth and the second sail ever unfurled in space. The NanoSail-D mission had two main objectives: eject a nanosatellite from a microsatellite; deploy its sail from a highly compacted volume and low mass system to validate large structure deployment and potential de-orbit technologies. These objectives were successfully achieved and the de-orbit analysis is in process. This paper presents an overview of the NanoSail-D project and insights into how potential setbacks were overcome. Many lessons have been learned during these past three years and are discussed in light of the phenomenal success and interest that this small satellite has generated. NanoSail-D was jointly designed and built by NASA's Marshall Space Flight Center and NASA's Ames Research Center. ManTech/NeXolve Corporation also provided key sail design support. The NanoSail-D experiment is managed by Marshall and jointly sponsored by the Army Space and Missile Defense Command, the Von Braun Center for Science and Innovation and Dynetics Inc. Ground operations support was provided by Santa Clara University, with radio beacon packets received from amateur operators around the world.

Alhorn, Dean C.↗

NASA NTRS2013

NanoSail - D Orbital and Attitude Dynamics

NanoSail-D unfurled January 20th, 2011 and successfully demonstrated the deployment and deorbit capability of a solar sail in low Earth orbit. The orbit was strongly perturbed by solar radiation pressure, aerodynamic drag, and oblate gravity which were modeled using STK HPOP. A comparison of the ballistic coefficient history to the orbit parameters exhibits a strong relationship between orbital lighting, the decay rate of the mean semi-major axis and mean eccentricity. A similar comparison of mean solar area using the STK HPOP solar radiation pressure model exhibits a strong correlation of solar radiation pressure to mean eccentricity and mean argument of perigee. NanoSail-D was not actively controlled and had no capability on-board for attitude or orbit determination. To estimate attitude dynamics we created a 3-DOF attitude dynamics simulation that incorporated highly realistic estimates of perturbing forces into NanoSail-D torque models. By comparing the results of this simulation to the orbital behavior and ground observations of NanoSail-D, we conclude that there is a coupling between the orbit and attitude dynamics as well as establish approximate limits on the location of the NanoSail-D solar center of pressure. Both of these observations contribute valuable data for future solar sail designs and missions.

Heaton, Andrew F.↗

NASA NTRS2014

Low-Cost, Class D Testing of Spacecraft Photovoltaic Systems Can Reduce Risk

The end-to-end verification of a spacecraft photovoltaic power generation system requires light! A lowcost, portable, and end-to-end photovoltaic-system test appropriate for NASA's new generation of Class D missions is presented. High risk, low-cost, and quick-turn satellites rarely have the resources to execute the traditional approaches from higher-class (A-C) missions. The Class D approach, as demonstrated on the Lunar Atmospheric and Dust Environment Explorer (LADEE), utilizes a portable, metalhalide, theatre lamp for an end-to-end photovoltaic system test. While not as precise and comprehensive as the traditional Large Area Pulsed Solar Simulator (LAPSS) test, the LADEE method leverages minimal resources into an ongoing assessment program that can be applied through numerous stages of the mission. The project takes a true Class D approach in assessing the technical value of a costly, highfidelity performance test versus a simpler approach with less programmatic risk. The resources required are a fraction of that for a LAPSS test, and is easy to repeat due to its portability. Further, the test equipment can be handed down to future projects without building an on-site facility. At the vanguard of Class D missions, the LADEE team frequently wrestled with and challenged the status quo. The philosophy of risk avoidance at all cost, typical to Class A-C missions, simply could not be executed. This innovative and simple testing solution is contextualized to NASA Class D programs and a specific risk encountered during development of the LADEE Electrical Power System (EPS). Selection of the appropriate lamp and safety concerns are discussed, with examples of test results. Combined with the vendor's panellevel data and periodic inspection, the method ensures system integrity from Integration and Test (I&T) through launch. Following launch, mission operations tools are utilized to assess system performance based on a scant amount of available data.

power systems↗

NASA NTRS2015

3-D Printed Ultem 9085 Testing and Analysis

The purpose of this document is to analyze the mechanical properties of 3-D printed Ultem 9085. This document will focus on the capabilities, limitations, and complexities of 3D printing in general, and explain the methods by which this material is tested. Because 3-D printing is a relatively new process that offers an innovative means to produce hardware, it is important that the aerospace community understands its current advantages and limitations, so that future endeavors involving 3-D printing may be completely safe. This document encompasses three main sections: a Slosh damage assessment, a destructive test of 3-D printed Ultem 9085 samples, and a test to verify simulation for the 3-D printed SDP (SPHERES Docking Port). Described below, 'Slosh' and 'SDP' refer to two experiments that are built using Ultem 9085 for use with the SPHERES (Synchronized Position Hold, Engage, Reorient, Experimental Satellites) program onboard the International Space Station (ISS) [16]. The SPHERES Facility is managed out of the National Aeronautics and Space Administration (NASA) Ames Research Center in California.

Aguilar, Daniel↗

NASA NTRS2017

The Use of D-Criteria to Assess Meteor Shower Significance

In theory, a meteor shower can be distinguished from the sporadic meteor background by its short duration and orbital similarity. In practice, the duration and strength of a shower and the orbital similarity between its constituent meteors varies widely between showers. Further complicating matters is the anisotropy of the sporadic background. These combined factors make it difficult to distinguish between shower and sporadic meteors with a single, static set of criteria. The orbital similarity, or D-, parameters are often used to assess the relationship between meteors [1,2,3]. The more dissimilar two orbits are, the higher their computed D value will be; generally, meteors are considered related if their D-parameter falls below some cutoff value [4]. However, this approach will include some sporadic meteors, and when a weak shower lies near a sporadic source, the false positive rate for shower association can be quite high. Additionally, this cutoff approach does not assess whether the shower itself is significant. We present a method for using D-parameters to extract showers from a dataset that automatically takes shower strength into account and tests for significance [5]. We accomplish this by calculating the false positive rate for shower association using "shower analogs," which are identical to the original shower except in solar longitude. This method is applied to a set of more than 30,000 meteors detected by the NASA All-Sky Fireball Network [6] and the Southern Ontario Meteor Network (SOMN) [7]. We previously detected 29 showers in our data using this method [5]; now, with another year of data, we have several additional detections. Figure 1 presents one example: the 2016 July gamma Draconid outburst. There are several benefits to using our method. First, it provides a test of shower significance (see Fig. 2 for an example of a non-detection). Second, it quantifies the probability that a meteor belongs to a given shower as a function of D-parameter. Finally, it quantifies the strength of a shower, even when individual members cannot be identified with 100% accuracy.

Moorhead, Althea V.↗

NASA NTRS2014

Low-cost, Risk-Reduction Testing of Class D Spacecraft Photovoltaic Systems

The end-to-end verification of a spacecraft photovoltaic power generation system requires light! A low-cost, portable, and end-to-end photovoltaic-system test appropriate for NASAs new generation of Class D missions is presented. High risk, low-cost, and quick-turn satellites rarely have the resources to execute the traditional approaches from higher-class (A-C) missions. The Class D approach, as demonstrated on the Lunar Atmospheric and Dust Environment Explorer (LADEE), utilizes a portable, metal-halide, theatre lamp for an end-to-end photovoltaic system test. While not as precise and comprehensive as the traditional Large Area Pulsed Solar Simulator (LAPSS) test, the LADEE method leverages minimal resources into an ongoing assessment program that can be applied through numerous stages of the mission. The project takes a true Class D approach in assessing the technical value of a costly, high-fidelity performance test versus a simpler approach with less programmatic risk. The resources required are a fraction of that for a LAPSS test, and is easy to repeat due to its portability. Further, the test equipment can be handed down to future projects without building an on-site facility.At the vanguard of Class D missions, the LADEE team frequently wrestled with and challenged the status quo. The philosophy of risk avoidance at all cost, typical to Class A-C missions, simply could not be executed. This innovative and simple testing solution is contextualized to NASA Class D programs and a specific risk encountered during development of the LADEE Electrical Power System (EPS). Selection of the appropriate lamp and safety concerns are discussed, with examples of test results. Combined with the vendors panel-level data and periodic inspection, the method ensures system integrity from Integration and Test (IT) through launch. Following launch, mission operations tools are utilized to assess system performance based on a scant amount of available data.

photovoltaic↗

NASA NTRSDate not supplied

Effects of Low Dose Radiation and Radiation Countermeasures on Infection By Spaceflight Analogue Cultured Salmonella Using 3-D Biomimetic Human Tissue Models

While both microgravity and radiation are major biological stressors associated with the spaceflight environment, their cumulative impact on host-pathogen interactions and infectious disease risks are rarely considered. This is critical to address, since the cumulative effects of these stressors during spaceflight may result in unexpected negative impacts on crew health and performance that neither condition alone would predict, thus limiting the ability to develop effective countermeasures. Previously, we showed that both spaceflight and spaceflight analogue culture increased the virulence and pathogenesis-related characteristics of the foodborne pathogen, Salmonella Typhimurium (S. Typhimurium), which is responsible for disqualification of food destined for the International Space Station and Salmonella spp. have been found aboard NASA spacecraft. Recently, we demonstrated that spaceflight-analogue culture of S. Typhimurium increased its ability to infect 3-D biomimetic human intestinal tissue models. In a separate study, we showed low dose radiation damaged our 3-D intestinal models. The primary objective of this proposal is to evaluate the possibility that low dose radiation will exacerbate the already increased bacterial pathogenicity of S. Typhimurium observed following spaceflight analogue culture. In addition, we will determine the impact of a radiation countermeasure to provide protection against both radiation and pathogen-induced tissue damage and inflammation. Hypothesis: The already enhanced infection potential of spaceflight analogue cultured S. Typhimurium will be further exacerbated when used to infect host cells exposed to low dose radiation and this enhanced pathogenicity can be mitigated by a radioprotective compound. Aims: 1.Characterize the impact of spaceflight-analogue culture on the ability of S. Typhimurium to infect 3-D biomimetic intestinal tissue models before and after exposure to low dose radiation. 2. Evaluate the ability of the radioprotective compound, EC-18, to protect 3-D intestinal models from low dose radiation, S. Typhimurium infection, and the cumulative impact of these stressors. Significance: Current infectious disease risk assessments for spaceflight do not consider the potential for increased susceptibility to infection and disease resulting from exposure to low dose radiation, which is a critical consideration. This study will provide key evidence to determine if exposure to low dose radiation may be a factor in astronaut susceptibility to infection during long duration exploration missions and the impact of selected countermeasures to mitigate that risk to crew health. We have completed infection studies of the 3-D biomimetic intestinal tissue models and are currently analyzing the data.

Jennifer Barrila↗

NASA NTRSDate not supplied

Effects of Low Dose Radiation and Radiation Countermeasures on Infection by Spaceflight Analogue Cultured Salmonella Using 3-D Biomimetic Human Tissue Models

Jennifer Barrila↗

DOE OSTI2023

Methods for making polypeptides including d-amino acids

A method of making a polypeptide including one or more D-amino acids is provided. The method includes combining a ribosome with protein translation factors including (1) a template encoding the polypeptide, wherein the template encoding the polypeptide includes one or more codons which have been recoded to accept a tRNA attached to a D-amino acid, (2) a plurality of L-amino acids and a plurality of corresponding tRNAs, (3) a plurality of D-amino acids and their corresponding aminoacyl tRNA synthetase or a plurality of tRNAs ligated with a D-amino acid, and (4) elongation factor P in a concentration of 2 to 20 micromolar, wherein translation of the template encoding the polypeptide occurs to produce the polypeptide including one or more D-amino acids.

Church, George M.↗