Search NASA⌕ Search

SEARCH · Search NASA

Results for “DETAILS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

Sulfate radical oxidation of aromatic contaminants: a detailed assessment of density functional theory and high-level quantum chemical methods

We present that advanced oxidation processes that utilize highly oxidative radicals are widely used in water reuse treatment. In recent years, the application of sulfate radical (SO 4 ˙ - ) as a promising oxidant for water treatment has gained increasing attention. To understand the efficiency of SO 4 ˙ - in the degradation of organic contaminants in wastewater effluent, it is important to be able to predict the reaction kinetics of various SO 4 ˙ - -driven oxidation reactions. In this study, we utilize density functional theory (DFT) and high-level wavefunction-based methods (including computationally-intensive coupled cluster methods), to explore the activation energies of SO 4 ˙ - -driven oxidation reactions on a series of benzene-derived contaminants. Additionally, these high-level calculations encompass a wide set of reactions including 110 forward/reverse reactions and 5 different computational methods in total. Based on the high-level coupled-cluster quantum calculations, we find that the popular M06-2X DFT functional is significantly more accurate for OH - additions than for SO 4 ˙ - reactions. Most importantly, we highlight some of the limitations and deficiencies of other computational methods, and we recommend the use of high-level quantum calculations to spot-check environmental chemistry reactions that may lie outside the training set of the M06-2X functional, particularly for water oxidation reactions that involve SO 4 ˙ - and other inorganic species.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

First-principles calculations and experimental studies of: XYZ 2 thermoelectric compounds: Detailed analysis of van der Waals interactions

First-principles calculations can accelerate the search for novel high-performance thermoelectric materials. However, the prediction of the thermoelectric properties is strongly dependent on the approximations used for the calculations. Here, thermoelectric properties were calculated with different computational approximations ( i.e. , PBE-GGA, HSE06, spin–orbit coupling and DFT-D3) for three layered XYZ 2 compounds (TmAgTe 2 , YAgTe 2 , and YCuTe 2 ). In addition to the computations, the structural, electrical and thermal properties of these compounds were measured experimentally and compared to the computations. Furthermore, an enhanced prediction of the crystal structure and heat capacity was achieved with the inclusion of van der Waals interactions due to more accurate modeling of the interatomic forces. In particular, a large shift of the acoustic phonons and low-frequency optical phonons to lower frequencies was observed from the dispersion-optimized structure. From the phonon dispersion curves of these compounds, the ultralow thermal conductivity in the investigated XYZ 2 compounds could be described by a recent developed minimum thermal conductivity model. Additionally, for the prediction of the electrical conductivity, a temperature-dependent relaxation time was used, and it was limited by acoustic phonons. While HSE06 has only a small influence on the electrical properties due to a computed band gap energy of >0.25 eV, the inclusion of both van der Waals interactions and spin–orbit coupling leads to a more accurate band structure, resulting in better prediction of electrical properties. Furthermore, the experimental thermoelectric properties of YAgTe 2 , TmAg 0.95 Zn 0.05 Te 2 and TmAg 0.95 Mg 0.05 Te 2 were measured, showing an increase in zT of TmAg 0.95 Zn 0.05 Te 2 by more than 35% ( zT = 0.47 ± 0.12) compared to TmAgTe 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Uranyl uptake into metal–organic frameworks: a detailed X-ray structural analysis

Metal–organic frameworks (MOF) are a subclass of porous framework materials that have been used for a wide variety of applications in sensing, catalysis, and remediation. Among these myriad applications is their remarkable ability to capture substances in a variety of environments ranging from benign to extreme. Among the most common and problematic substances found throughout the world's oceans and water supplies is [UO 2 ] 2+ , a common mobile ion of uranium, which is found both naturally and as a result of anthropogenic activities, leading to problematic environmental contamination. While some MOFs possess high capability for the uptake of [UO 2 ] 2+ , many more of the thousands of MOFs and their modifications that have been produced over the years have yet to be studied for their ability to uptake [UO 2 ] 2+ . However, studying the thousands of MOFs and their modifications presents an incredibly difficult task. As such, a way to narrow down the numbers seems imperative. In this work, we evaluate the binding behaviors as well as identify the specific binding sites of [UO 2 ] 2+ incorporated into six different Zr MOFs to elucidate specific features that improve [UO 2 ] 2+ uptake. In doing so, we also present a method for the determination and verification of these binding sites by Anomalous wide-angle X-ray scattering, X-ray fluorescence, and X-ray absorption spectroscopy. This research not only presents a way for future research into the uptake of [UO 2 ] 2+ into MOFs to be conducted but also a means to evaluate MOFs more generally for the uptake of other compounds to be applied for environmental remediation and improvement of ecosystems globally.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The DEHVILS in the details: Type Ia supernova Hubble residual comparisons and mass step analysis in the near-infrared

Measurements of type Ia supernovae (SNe Ia) in the near-infrared (NIR) have been used both as an alternate path to cosmology compared to optical measurements and as a method of constraining key systematics for the larger optical studies. With the DEHVILS sample, the largest published NIR sample with consistent NIR coverage of maximum light across three NIR bands ( Y, J , and H ), we check three key systematics: (i) the reduction in Hubble residual scatter as compared to the optical, (ii) the measurement of a “mass step” or lack thereof and its implications, and (iii) the ability to distinguish between various dust models by analyzing slopes and correlations between Hubble residuals in the NIR and optical. We produce SN Ia simulations of the DEHVILS sample and find that it is harder to differentiate between various dust models than previously understood. Additionally, we find that fitting with the current SALT3-NIR model does not yield accurate wavelength-dependent stretch-luminosity correlations, and we propose a limited solution for this problem. From the data, we see that (i) the standard deviation of Hubble residual values from NIR bands treated as standard candles are 0.007–0.042 mag smaller than those in the optical, (ii) the NIR mass step is not constrainable with the current sample size of 47 SNe Ia from DEHVILS, and (iii) Hubble residuals in the NIR and optical are correlated in the data. We test a few variations on the number and combinations of filters and data samples, and we observe that none of our findings or conclusions are significantly impacted by these modifications.

Astronomy & Astrophysics↗

Case studies in brain dosimetry for internal emitters: Is more detail needed for epidemiology?

Element-specific biokinetic models are used to reconstruct doses to systemic tissues from internal emitters. These models typically depict explicitly only those tissues that tend to dominate the systemic behaviour of the element over time. The remaining tissues are aggregated into a pool called Other tissue in which activity is assumed to be uniformly distributed. Explicitly identified tissues usually consist of some subset of the tissues liver, kidneys, bone, bone marrow, gonads, thyroid, spleen, and skin.

Leggett, Richard Wayne↗

Nonadiabatic simulation study of photoisomerization of azobenzene: Detailed mechanism and load-resisting capacity

Nonadiabatic dynamical simulations were carried out to study cis-to-trans isomerization of azobenzene under laser irradiation and/or external mechanical loads. We used a semiclassical electron-radiation-ion dynamics method that is able to describe the coevolution of the structural dynamics and the underlying electronic dynamics in a real-time manner. It is found that azobenzene photoisomerization occurs predominantly by an out-of-plane rotation mechanism even under a nontrivial resisting force of several tens of piconewtons. We have repeated the simulations systematically for a broad range of parameters for laser pulses, but could not find any photoisomerization event by a previously suggested in-plane inversion mechanism. The simulations found that the photoisomerization process can be held back by an external resisting force of 90-200 pN depending on the frequency and intensity of the lasers. This study also found that a pure mechanical isomerization is possible from the cis-to-trans state if the azobenzene molecule is stretched by an external force of {approx}1250-1650 pN. Remarkably, the mechanical isomerization first proceeds through a mechanically activated inversion, and then is diverted to an ultrafast downhill rotation that accomplishes the isomerization. Implications of these findings to azobenzene-based nanomechanical devices are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Detailed plasma potential measurements in a radio-frequency expanding plasma obtained from various electrostatic probes

On-axis plasma potential measurements have been made with an emissive probe in a low pressure (0.044 Pa) rf expanding plasma containing an ion beam. The beam is detected with a retarding field energy analyzer (RFEA), and is seen to disappear at high pressure (0.39 Pa). The emissive probe measurements are in very good agreement with corresponding measurements made with two separate RFEAs, and the results indicate that the floating potential of the strongly emitting probe gives an accurate measure of the plasma potential under the present conditions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Detailed Study of the Variable Afterglow of GRB 060526

Using one of the largest photometric datasets ever obtained for a GRB, we investigate the highly variable afterglow light curve of Gamma-Ray Burst 060526. The light curve shows clear deviations from a power-law behaviour which we attribute to energy injections. We fit the data to a numerical model including 6 energy injections which explains the full temporal behaviour of the light curve in many wavebands, ranging from NIR to X-rays.

79 ASTRONOMY AND ASTROPHYSICS↗

Detailed study of the influence of surface misorientation on the density of Anti-Phase Boundaries in 3C-SiC layers grown on (001) silicon

In this work we investigated the influence of the Si substrate misorientation and 3C-SiC film thickness on the density of Anti-Phase Boundaries, in order to better understand the mechanism of antiphase domain annihilation. The two highlights in our work are the utilization of [001] orientated Si on-axis wafer with spherical dimples, which gave us access to a continuum of off-cut angles (0 deg. to {approx}11 deg.) and directions, and the deposition of elongated silicon islands on the surface of 3C-SiC epilayers, which improved the detection of APDs by analysis of Scanning Electron Microscopy images. We found that for a given layer thickness the relative surface occupation of one domain increases with the off-cut angle value, leading to single domain film up to a certain angle. This critical value is reduced as the film is thickened.

36 MATERIALS SCIENCE↗

Detailed Atomic Structure of Neutral and Near-Neutral Systems

This paper highlights the issues which need to be addressed in undertaking accurate calculations of multi-electron atoms and ions, particularly at or near the neutral end of an isoelectronic sequence. We illustrate the processes through two calculations--of transitions in Cl I and Sn II--and discuss the convergence of our results as well as updating previous work. In particular, in the case of Cl I, we propose new identifications of the levels involved in certain transitions which are important in determining the abundance of chlorine in the inter-stellar medium (ISM), while in singly ionised tin, our calculations suggest a re-evaluation of the the abundance of tin in the ISM. We also confirm recent identification of Sn II lines seen in tokamak plasmas.

74 ATOMIC AND MOLECULAR PHYSICS↗

Comment on ''Cosmic ray diffusion: Detailed investigation of a recent model'' [Phys. Plasmas 18, 082305 (2011)]

An improved theory for diffusion of energetic particles across the mean magnetic field has been developed recently. Lerche and Tautz [Phys. Plasmas 18, 082305 (2011)] have revisited the latter theory. They have proposed a different set of mathematical steps and derived a nonlinear integral equation which, according to them, deviates considerably from previous expressions. It is the purpose of the present paper to demonstrate that the latter statement is incorrect. The equation of Lerche and Tautz is very close to the original equation. Furthermore, it is shown that the original equation is even more accurate.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Response to ''Comment on 'Cosmic ray diffusion: Detailed investigation of a recent model''' [Phys. Plasmas 18, 114701 (2011)]

Recently [Phys. Plasmas 18, 082305 (2011)], the otherwise successful unified non-linear transport (UNLT) theory was critically examined. In a comment [Phys. Plasmas 18, 114701 (2011)], it was argued that the deviation from the original UNLT theory is marginal. Here, it is emphasized that the main point was to investigate the basic mathematical properties of the UNLT formulation by showing model approaches rather than deriving complete solutions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Argon plasma modeling with detailed fine-structure cross sections

Our recently reported fully relativistic distorted-wave electron-impact cross sections from the ground and metastable states of argon to various excited fine-structure levels are incorporated in a collisional-radiative model to obtain the population densities for the 3p{sup 5}4s and 3p{sup 5}4p (1s and 2p) fine-structure manifolds for low temperature argon plasmas. Excitation cross sections from the two 3p{sup 5}4s J = 1 resonance levels, 1s{sub 2} and 1s{sub 4}, to the higher lying 2p fine-structure manifold as well as for transitions among individual levels of the 1s and 2p manifolds are also calculated and included in the present model which were not fully considered in any earlier model. Our results for the population densities of the 1s and 2p levels show good agreement with recent measurements. The variation of population densities of all the 1s and 2p levels with electron temperature and density are presented. We have also calculated and compared the intensities for the 750.38 nm (2p{sub 1}{yields} 1s{sub 2}) and 696.54 nm (2p{sub 2}{yields} 1s{sub 5}) lines with recently reported experimental results. The present work suggests that the inclusion of a complete fine-structure description of the electronic processes occurring in the plasma is important for a collisional radiative model, which includes separate 1s and 2p levels.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Room temperature ferroelectric and magnetic investigations and detailed phase analysis of Aurivillius phase Bi{sub 5}Ti{sub 3}Fe{sub 0.7}Co{sub 0.3}O{sub 15} thin films

Aurivillius phase Bi{sub 5}Ti{sub 3}Fe{sub 0.7}Co{sub 0.3}O{sub 15} (BTF7C3O) thin films on {alpha}-quartz substrates were fabricated by a chemical solution deposition method and the room temperature ferroelectric and magnetic properties of this candidate multiferroic were compared with those of thin films of Mn{sup 3+} substituted, Bi{sub 5}Ti{sub 3}Fe{sub 0.7}Mn{sub 0.3}O{sub 15} (BTF7M3O). Vertical and lateral piezoresponse force microscopy (PFM) measurements of the films conclusively demonstrate that BTF7C3O and BTF7M3O thin films are piezoelectric and ferroelectric at room temperature, with the major polarization vector in the lateral plane of the films. No net magnetization was observed for the in-plane superconducting quantum interference device (SQUID) magnetometry measurements of BTF7M3O thin films. In contrast, SQUID measurements of the BTF7C3O films clearly demonstrated ferromagnetic behavior, with a remanent magnetization, B{sub r}, of 6.37 emu/cm{sup 3} (or 804 memu/g), remanent moment = 4.99 Multiplication-Sign 10{sup -5} emu. The BTF7C3O films were scrutinized by x-ray diffraction, high resolution transmission electron microscopy, scanning transmission electron microscopy, and energy dispersive x-ray analysis mapping to assess the prospect of the observed multiferroic properties being intrinsic to the main phase. The results of extensive micro-structural phase analysis demonstrated that the BTF7C3O films comprised of a 3.95% Fe/Co-rich spinel phase, likely CoFe{sub 2-x}Ti{sub x}O{sub 4}, which would account for the observed magnetic moment in the films. Additionally, x-ray magnetic circular dichroism photoemission electron microscopy (XMCD-PEEM) imaging confirmed that the majority of magnetic response arises from the Fe sites of Fe/Co-rich spinel phase inclusions. While the magnetic contribution from the main phase could not be determined by the XMCD-PEEM images, these data however imply that the Bi{sub 5}Ti{sub 3}Fe{sub 0.7}Co{sub 0.3}O{sub 15} thin films are likely not single phase multiferroics at room temperature. The PFM results presented demonstrate that the naturally 2D nanostructured Bi{sub 5}Ti{sub 3}Fe{sub 0.7}Co{sub 0.3}O{sub 15} phase is a novel ferroelectric and has potential commercial applications in high temperature piezoelectric and ferroelectric memory technologies. The implications for the conclusive demonstration of ferroelectric and ferromagnetic properties in single-phase materials of this type are discussed.

36 MATERIALS SCIENCE↗

Detailed photoluminescence studies of thin film Cu{sub 2}S for determination of quasi-Fermi level splitting and defect levels

We have studied chalcocite (Cu{sub 2}S) layers prepared by physical vapor deposition with varying deposition parameters by calibrated spectral photoluminescence (PL) and by confocal PL with lateral resolution of Δ x≈0.9 μm. Calibrated PL experiments as a function of temperature T and excitation fluxes were performed to obtain the absolute PL-yield and to calculate the splitting of the quasi-Fermi levels (QFLs) μ=E{sub f,n}−E{sub f,p} at an excitation flux equivalent to the AM 1.5 spectrum and the absorption coefficient α(ℏω), both in the temperature range of 20 K≤T≤400 K. The PL-spectra reveal two peaks at E{sub #1}=1.17 eV and E{sub #2}=1.3 eV. The samples show a QFL-splitting of μ>700 meV associated with a pseudo band gap of E{sub g}=1.25 eV. The high-energy peak shows an unexpected temperature behavior, namely, an increase of PL-yield with rising temperature at variance with the behavior of QFL-splitting that decreases with rising T. Our observations indicate that, contrary to common believe, it is not the PL-yield, but rather the QFL-splitting that is the comprehensive indicator of the quality of the excited state in an illuminated semiconductor. A further examination of the lateral variation of opto-electronic properties by confocal PL and the surface contour shows no detectable correlation between Cu{sub 2}S grains/grain boundaries and the PL-yield or QFL-splitting.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗