Search NASA⌕ Search

SEARCH · Search NASA

Results for “DRILL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

Lineaments on Skylab photographs: Detection, mapping, and hydrologic significance in central Tennessee

An investigation was carried out to determine the feasibility of mapping lineaments on SKYLAB photographs of central Tennessee and to determine the hydrologic significance of these lineaments, particularly as concerns the occurrence and productivity of ground water. Sixty-nine percent more lineaments were found on SKYLAB photographs by stereo viewing than by projection viewing, but longer lineaments were detected by projection viewing. Most SKYLAB lineaments consisted of topographic depressions and they followed or paralleled the streams. The remainder were found by vegetation alinements and the straight sides of ridges. Test drilling showed that the median yield of wells located on SKYLAB lineaments were about six times the median yield of wells located by random drilling. The best single detection method, in terms of potential savings, was stereo viewing. Larger savings might be achieved by locating wells on lineaments detected by both stereo viewing and projection.

Moore, G. K.↗
NASA NTRS1977

Fuel injector for jet-stirred combustors

Simple and inexpensive method of making quartz injectors yields injectors of superior characteristics. Quartz injector is fabricated by heating quartz rod and blowing and forming sphere on end. As with metal injectors, orifices are then drilled in spherical shell. Time required to form quartz is only 0.5 man-hour and 7.5 man-hours are required to drill holes. Total time of fabrication, 8 man-hours, is fraction of 40 man-hours required to complete metal injector. Success with technique and material is such that further substitutions for other related components are being contemplated.

Anderson, S. G.↗
NASA NTRS1979

Circuit-lead trimming template

Template for use in trimming leads on production wiring boards is low-cost means for eliminating rejections for short leads and improving lead-strength uniformity. Template is simply unclad piece of printed-circuit board material that is drilled using same drill control tape used in making original production board. Revisions in component layout of board can therefore be made simultaneously in template.

Ofarrell, K.↗
NASA NTRS1977

Remanent magnetization stratigraphy of lunar cores

Depth dependent fluctuations have been observed in the natural remanent magnetizations (NRM) of drive cores and drill strings from Apollo 16 and 17 missions. Partial demagnetization of unstable secondary magnetizations and identification of characteristic error signals from a core which is known to have been recently disturbed allow us to identify and isolate the stable NRM stratigraphy in double drive core 60010/60009 and drill strings 60002-60004. The observed magnetization fluctuations persist after normalization to take into account depth dependent variations in the carriers of stable NRM. We tentatively ascribe the stable NRM stratigraphy to instantaneous records of past magnetic fields at the lunar surface and suggest that the stable NRM stratigraphy technique could develop as a new relative time-stratigraphic tool, to be used with other physical measurements such as relative intensity of ferromagnetic resonance and charged particle track density to study the evolution of the lunar regolith.

Banerjee, S. K.↗
NASA NTRS1977

Lunar regolith dynamics based on analysis of the cosmogenic radionuclides Na-22, Al-26, and Mn-53

Depth profiles of Na-22 and Al-26 in the upper portions of five lunar cores are analyzed. From the analyses, it is concluded that the natural gardening processes on the lunar surface result in mixing of the regolith to a depth of 2-3 cm over a time period which is short compared with the half-life of Al-26 (0.73 m.y.). It is also concluded that the rotary drill processes which were used to obtain the deep drill samples generally resulted in loss and/or mixing of the upper portions of the cores. In contrast, the near-surface regions of the drive tube cores appear to have a well-preserved stratigraphy. Analysis of Mn-53 in samples of six lunar rocks helps substantiate the accuracy of age date estimates by other means, and provides definite information that the total lunar surface exposure of two of these rocks has occurred during a single surface event which continued to their collection.

Fruchter, J. S.↗
NASA NTRS1977

Nitrogen isotopes in lunar soils as a measure of cosmic-ray exposure and regolith history

Previous studies have shown that the bulk of the nitrogen in soils has been implanted by the solar wind, that the N-15/N-14 ratio of the implanted nitrogen has apparently increased with time, and that both soils and rocks contain a nitrogen component greatly enriched in N-15, relative to natural abundance ratios, due to cosmic-ray spallation. An investigation was, therefore, conducted to test the feasibility of using spallation-produced N-15 for determining cosmic-ray exposure ages. Samples from several depths in the Apollo 15 deep drill core were analyzed. The data obtained have also been evaluated with regard to possible models for the prior history of the material now in the Apollo 15 core. In addition, analyses have been performed of several other soil samples considered for various reasons to be of particular interest, such as orange soil 74220 and its companion 74240, Apollo 16 drill core sample 60002, and the apparently peculiar fillet soil 67461. Wherever possible, analyses were carried out by step-wise heating rather than by total pyrolysis. On the basis of the results of the investigation it is concluded that nitrogen isotope ratio determinations provide a usable method for determining cosmic-ray exposures for soils.

Becker, R. H.↗
NASA NTRS1978

Regolith irradiation stratigraphy at the Apollo 16 and 17 landing sites

Additional fossil track measurements in the Apollo 17 deep drill stem, as well as detailed track studies in section 3 of the Apollo 16 deep drill core are reported. Although the upper part of the Apollo 17 core seems to have accreted rapidly, no evidence for a rapid accretion of the lower part, as postulated by some authors, is found. Despite the apparent inhomogeneity of section 60003, its track record is unexpectedly homogeneous; all levels are heavily irradiated and emplacement of big slabs of material is not favored.

Crozaz, G.↗
NASA NTRS1981

Cutting holes in fabric-faced panels

Tool has 2 carbide inserts that bore clean holes through fibrous material with knifelike slicing action. Cutting edge of insert is curved, with plane inner surface at 30 degree angle to tool axis. Drill press or hand-held drill can be used to hold cutting tool.

Peterson, S. A.↗
NASA NTRS1979

Lunar and Planetary Science Conference, 10th, Houston, Tex., March 19-23, 1979, Proceedings. Volume 2 - Early solar system and lunar regolith

Papers are presented concerning studies of the lunar regolith, the remote sensing of the surface compositions of the moon and planets, and the origin and evolution of the solar system. Specific topics include the stratigraphy and depositional history of the Apollo 17 deep drill core, the trace element and metallic iron abundances in fractions of the Apollo 15 deep drill core, the surface chemistry of lunar impact glasses, cosmic ray-produced noble gases in lunar samples, and the properties of microcraters and cosmic dust less than 1000 A in diameter. Attention is also given to the remote sensing of mare surface titanium concentrations, Viking Lander multispectral images, star and planetary system formation in collapsing, viscous, rotating clouds and the importance of planet size to basaltic volcanism.

Merrill, R. B.↗
NASA NTRS1983

Six-Axis Electrical-Discharge Machine

Electrical discharge machine (EDM) of unusual versitility made by conversion of radial drill. Drilling head is replaced by ram that holds and positions electrode. Tank and recirculation system for coolant are added. EDM has six independent motions and drastically reduced cost of manufacturing. New applications are constantly being found.

Werner, A. R.↗
NASA NTRS1983

Electrical Conduit Distributes Weld Gas Evenly

Purge-gas distributor, made from flexible electrical conduit by drilling small holes along its length, provides even gas flow for welding. Flexible conduit adjusts to accomodate almost any shape and is used for gas coverage in other applications that previously needed formed and drilled solid tubing.

Ambrisco, D. P.↗
NASA NTRS1982

Method for repair of thin glass coatings

A method of repairing cracks or damaged areas in glass, in particular, glass coatings provided on tile. The method includes removing the damaged area using a high speed diamond burr drilling out a cavity that extends slightly into the base material of the tile. All loose material is then cleaned from the drilled out cavity and the cavity is filled adjacent the upper surface of the coating with a filler material including chopped silica fibers mixed with a binder. The filler material is packed into the cavity and a repair coating is applied by means of a brush or sprayed thereover. The repair includes borosilicate suspended in solution. Heat is applied at approximately 2100 F. for approximately five minutes for curing the coating, causing boron silicide particles of the coating to oxidize forming a very fluid boron-oxide rich glass which reacts with the other frits to form an impervious, highly refractory layer.

Holt, J. W.↗
NASA NTRS1980

The lunar regolith - Comparative chemistry of the Apollo sites

In a grain-size study of various sections of the Apollo 17 drill core conducted by Laul et al. (1978, 1979), it was found that the fine fractions were consistently more enriched in highland material than the coarse fractions. Relative to the coarse fractions, the fine fractions contained 6-20% more KREEP material. In connection with these observations, an investigation was conducted to find out whether KREEP enrichment in fines occurs in soils from other sites. The investigation is also concerned with possibilities regarding any preferential lateral transport of the finest soil fractions relative to the coarser fractions. A description is presented of the chemical study of eight soils from five landing sites, taking into account also data on soil 70009 from the Apollo 17 drill core. Relative to the coarse fractions, no mare enrichment is found in the fines of highland soils. This argues strongly against preferential transport of fine fractions relative to coarse.

Laul, J. C.↗
NASA NTRS1982

Acoustic microscopy of silicon carbide materials

It is shown that scanning laser acoustic microscopy (SLAM) is able to detect such fracture-controlling flaws in dense silicon carbide materials as surface voids, whose diameter-by-depth size is a minimum of 75 by 17 microns in reaction-bonded SiC and 68 by 25 microns in alpha-SiC. Surface conditions such as pitting, which have been found to limit the discernibility of drilled holes, become important when pit and drilled hole sizes become comparable.

Khandelwal, P. K.↗
NASA NTRS1984

Vectorization of a penalty function algorithm for well scheduling

In petroleum engineering, the oil production profiles of a reservoir can be simulated by using a finite gridded model. This profile is affected by the number and choice of wells which in turn is a result of various production limits and constraints including, for example, the economic minimum well spacing, the number of drilling rigs available and the time required to drill and complete a well. After a well is available it may be shut in because of excessive water or gas productions. In order to optimize the field performance a penalty function algorithm was developed for scheduling wells. For an example with some 343 wells and 15 different constraints, the scheduling routine vectorized for the CYBER 205 averaged 560 times faster performance than the scalar version.

Absar, I.↗
NASA NTRS1985

Automatic Fastening Large Structures: a New Approach

The external tank (ET) intertank structure for the space shuttle, a 27.5 ft diameter 22.5 ft long externally stiffened mechanically fastened skin-stringer-frame structure, was a labor intensitive manual structure built on a modified Saturn tooling position. A new approach was developed based on half-section subassemblies. The heart of this manufacturing approach will be 33 ft high vertical automatic riveting system with a 28 ft rotary positioner coming on-line in mid 1985. The Automatic Riveting System incorporates many of the latest automatic riveting technologies. Key features include: vertical columns with two sets of independently operating CNC drill-riveting heads; capability of drill, insert and upset any one piece fastener up to 3/8 inch diameter including slugs without displacing the workpiece offset bucking ram with programmable rotation and deep retraction; vision system for automatic parts program re-synchronization and part edge margin control; and an automatic rivet selection/handling system.

Lumley, D. F.↗
NASA NTRS1987

Method for machining holes in composite materials

A method for boring well defined holes in a composite material such as graphite/epoxy is discussed. A slurry of silicon carbide powder and water is projected onto a work area of the composite material in which a hole is to be bored with a conventional drill bit. The silicon carbide powder and water slurry allow the drill bit, while experiencing only normal wear, to bore smooth, cylindrical holes in the composite material.

Daniels, Julia G.↗
NASA NTRS1986

In situ production of terrestrial cosmogenic helium and some applications to geochronology

The concentrations of cosmogenic He-3 have been measured in a series of basaltic drill core samples from Hawaiian volcanoes Haleakala and Mauna Loa. The He-3 concentration in the surface of a radiocarbon dated Mauna Loa flow (20,000 years) gives reasonable agreement with a theoretical production rate of 140 atoms/g/yr, and suggests that the uncertainty in this rate is roughly 10 percent. The results illustrate the feasibility of using He-3 to measure exposure ages of young basaltic lava flows and for measuring erosion rates. Erosion rates calculated from the three Haleakala cores range from 7 to 11 meters/million years. The drill core data demonstrate that accurate depth control is crucial to the use and evaluation of cosmogenic helium. Depth profiles from several of the older cores display a nonexponential depth dependence of He-3(c) below 170 g/sq cm, which is attributed to the contribution from Li-6(n, alpha)T, where the neutrons are from stopped muons. This has important implications for depth dependence of cosmogenic He-3 because muons are weakly attenuated compared to the nucleonic component that produces spallation.

Kurz, Mark D.↗