SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
A design and performance evaluation is presented for the LANDSAT D attitude control system (ACS). Control and configuration of the gimballed Ku-band antenna system for communication with the tracking and data relay satellite (TDRS). Control of the solar array drive considered part of the ACS is also addressed.
The use of an operational Tracking and Data Relay Satellite System (TDRSS) and the remaining ground stations for the STDN (GSTDN) was investigated. The operational aspects of TDRSS concepts, GSTDN as a 14-site network, and GSTDN as a 7 site-network were compared and operations control concepts for the configurations developed. Man/machine interface, scheduling system, and hardware/software tradeoff analyses were among the factors considered in the analysis.
A conceptual design and program plan for an Orbital Construction Demonstration Article (OCDA) was developed that can be used for evaluating and establishing practical large structural assembly operations. A flight plan for initial placement and continued utility is presented as a basic for an entirely new shuttle payload line-item having great future potential benefit for space applications. The OCDA is a three-axis stabilized platform in low-earth orbit with many structural nodals for mounting large construction and fabrication equipments. This equipment would be used to explore methods for constructing the large structures for future missions. The OCDA would be supported at regular intervals by the shuttle. Construction experiments and consumables resupply are performed during shuttle visit periods. A 250 kw solar array provides sufficient power to support the shuttle while attached to the OCDA and to run construction experiments at the same time. Wide band communications with a Telemetry and Data Relay Satellite compatible high gain antenna can be used between shuttle revisits to perform remote controlled, TV assisted construction experiments.
A timing analysis for data readout through the Tracking and Data Relay Satellite System (TDRSS) was presented. Various time tagging approaches were considered and the resulting accuracies delineated. The TDRSS was also defined and described in detail.
Various aspects of the planned LANDSAT D system are discussed. LANDSAT D incorporates the Thematic Mapper (TM) as a sensor, it utilizes the Multi-mission Modular Spacecraft (MMS), it makes use of the Tracking and Data Relay Satellite System (TDRSS) and it employs a more advanced ground system. Each of these represent significant improvements in the state-of-the-art.
The earth and orbiter body reflections involving the Tracking Data Relay Satellite (TDRS)/orbiter communications link are evaluated. Recommendations address operational conditions in order to avoid critical multipath impacts, modulation preferences during acquisition, and preferred scan limit implementation.
The pseudonoise (PN) code library for the Tracking and Data Relay Satellite System (TDRSS) Services was defined and described. The code library was chosen to minimize user transponder hardware requirements and optimize system performance. Special precautions were taken to insure sufficient code phase separation to minimize cross-correlation sidelobes, and to avoid the generation of spurious code components which would interfere with system performance.
Following an outline of the main functions of the Tracking and Data Relay Satellite System (TDRSS) and the Astrophysics Transient Explorer (ATREX), the design options of the delivery into orbit of automated spacecraft, ATREX in particular, on board the Shuttle are discussed. The proportional counters used as detectors in ATREX need protection from humidity, so the spacecraft will be shipped in a sealed container filled with dry nitrogen and not opened until it is safely in the clean room at the launch site. The spacecraft and its booster will be loaded into a canister maintaining low humidity, to protect them all the way through the payload changeout room and into the Shuttle itself. After launching the Shuttle into orbit, the spacecraft will be tested on board the Shuttle just before releasing it. The future applications of this technique in Extravehicular Activity (EVA) and Gamma Ray Astronomy Observatories are discussed.
ERTS-1 is described as a near real time, data relay system for south Florida water quantity and quality monitoring. An ecological model of the Shark River Slough in Everglades National Park is also presented.
This work was conducted to demonstrate the performance levels attainable with an ESSA (Electronic Switching Spherical Array) antenna by designing and testing an engineering model. The antenna was designed to satisfy general spacecraft environmental requirements and built to provide electronically commandable beam pointing capability throughout a hemisphere. Constant gain and beam shape throughout large volumetric coverage regions are the principle characteristics. The model is intended to be a prototype of a standard communications and data handling antenna for user scientific spacecraft with the Tracking and Data Relay Satellite System (TDRSS). Some additional testing was conducted to determine the feasibility of an integrated TDRSS and GPS (Global Positioning System) antenna system.
A brief overview of the Office of Space Tracking and Data Systems support functions is given along with a description of the Spaceflight Tracking and Data Network and the Deep Space Network. Preparations for upcoming missions, wideband communications, and Tracking and Data Relay Satellite Systems are discussed.
This paper uses MAP estimation techniques to obtain carrier reconstruction circuits for unbalanced QPSK signals. In addition, the performance analysis of these circuits is carried out to the extent that a loop design can proceed. Numerical results are presented in order to demonstrate the utility of the theory developed. This signal design will be used in the development of the Tracking and Data Relay Satellite System (TDRSS) and the Navigation Satellite Timing and Ranging Global Positioning System (NAVSTAR GPS).
The implementation of both sequential and batch methods of estimation on IMP-16 microprocessors was investigated. Simulated data was used from a tracking and data relay satellite whose target satellite was the Solar Maximum Mission. An interesting feature of the hardware was the use of two interconnected IMP-16's. Some preliminary results from the study, as well as the difficulties and advantages in the use of microprocessors, are presented.
A lightweight low drag coplanar slot antenna was developed for use on commercial jet aircraft that will provide upper hemisphere coverage in the UHF band at frequencies of 402 and 468 MHz is described. The antenna is designed to transmit meteorological data from wide body jet aircraft to ground users via synchronous meteorological data relay satellites. The low profile antenna (23.5 cm wide by 38.1 cm long slot by 1.9 cm high) is a conformal antenna utilizing the coplanar approach with the advantages of broad frequency bandwidth and improved electrical integrity over wide range of temperature. The antenna is circular polarized, has anon axis gain of near +2.5 dB, and a HPBW greater than 90 deg. Areas discussed include antenna design, radiation characteristics, flight testing, and system performance.
This paper provides a general description of how the tracking and data relay satellite system (TDRSS) will be utilized by the Space Shuttle. The design approaches which were necessitated for both the Shuttle S-band and Ku-band subsystems are functionally described, and current performance estimates are summarized for each communications link. The operational advantages and disadvantages of TDRSS to Shuttle are briefly considered, and both the technical and operational problem areas which have been identified to date are described.
An analytical simulation package which can predict bit error rate and tracking performance for nonlinear, bandlimited satellite links was developed for the Tracking and Data Relay Satellite System (TDRSS). It is based on analytical simulation, i.e., a combination of simulation techniques and analytical performance evaluation. This allows the use of a more realistic signal format than is possible with a purely analytical approach and maintains the advantage of short computation time on bandlimited, nonlinear channels with a noisy uplink. The link models and the main features of the program are described and an overview of the mathematical approach is given. Sample results of computer runs are provided for current power budgets and system design parameters for both forward and return links.
NASA presently maintains a worldwide system of ground tracking stations to provide communication support (tracking, telemetry and command) to all authorized user spacecraft missions. The set of ground stations supporting earth orbiting missions, and their supporting communication links (called NASCOM) to various NASA centers, is designated as the Spaceflight Tracking and Data Network (STDN). Major users of the STDN in the 1980's include LANDSAT-D, SEASAT-B and the Shuttle, all of which are capable of generating data at rates that cannot be handled by the present STDN ground stations. The expanded capabilities of the STDN in the 1980's to provide support to these missions and other users is addressed. The newest asset of the STDN, the Tracking and Data Relay Satellite System (TDRSS) is described, as are the remaining STDN ground stations (called the GSTDN). The Shuttle communications support is not only for the Shuttle itself, but also for the Spacelab, attached payloads (within the Shuttle bay), and detached payloads being either deployed or retrieved by Shuttle. The specific communications support being provided by STDN (both by TDRSS and by the GSTDN) to the Shuttle is also described.
A recently developed analytical simulation package makes it possible to obtain an analytical verification of data transmission performance through Tracking and Data Relay Satellite System (TDRSS) satellites. The development of this simulation package has required performing an analytical evaluation of several key communication features of the TDRSS services in order to ensure the consistency of TDRSS and Shuttle user spacecraft transponder performance specifications. Analytical models of the Shuttle transponder, TDRS, TDRSS ground terminal, and link dynamics have been developed for the forward and return links. The models used for the signals and the transmission path are discussed, giving attention to the general set-up of the program and the analytical approach used. Some of the results obtained by using the program are also considered.