Search NASA⌕ Search

SEARCH · Search NASA

Results for “Describing function”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Low Threshold Acquisition controller for Skipper CCDs

The development of the Skipper Charge Coupled Devices (Skipper-CCDs) has been a major technological breakthrough for sensing very weak ionizing particles. The sensor allows to reach the ultimate sensitivity of silicon material as a charge signal sensor by unambiguous determination of the charge signal collected by each cell or pixel, even for single electron-hole pair ionization. Extensive use of the technology was limited by the lack of specific equipment to operate the sensor at the ultimate performance. In this work a simple, single-board Skipper-CCD controller is presented, aimed for the operation of the detector in high sensitivity scientific applications. The article describes the main components and functionality of the Low Threshold Acquisition (LTA) together with experimental results when connected to a Skipper-CCD sensor. Measurements show unprecedented deep sub-electron noise of 0.039 e$^-_{rms}$/pix for 5000 pixel measurements.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2018

A Structure Function Model Recovers the Many Formulations for Air-Water Gas Transfer Velocity: Air-Water Gas Transfer

Two ideas regarding the structure of turbulence near a clear air-water interface are used to derive a waterside gas transfer velocity kL for sparingly and slightly soluble gases. The first is that k L is proportional to the turnover velocity described by the vertical velocity structure function D ww (r), where r is separation distance between two points. The second is that the scalar exchange between the air-water interface and the waterside turbulence can be suitably described by a length scale proportional to the Batchelor scale lB=ηSc -1/2 , where Sc is the molecular Schmidt number and η is the Kolmogorov microscale defining the smallest scale of turbulent eddies impacted by fluid viscosity. Using an approximate solution to the von Kármán-Howarth equation predicting D ww (r) in the inertial and viscous regimes, prior formulations for k L are recovered including (i) k L =$\sqrt{2/15}$Sc -1/2 $v$, v K is the Kolmogorov velocity defined by the Reynolds number v K η/ν = 1 and ν is the kinematic viscosity of water; (ii) surface divergence formulations; (iii) k L ∝ SC -1/2 u * , where u * is the waterside friction velocity; (iv) k L ∝ Sc -1/2 $\sqrt{gv/u_*}$ for Keulegan numbers exceeding a threshold needed for long-wave generation, where the proportionality constant varies with wave age, g is the gravitational acceleration; and (v) k L = $\sqrt{2/15}$Sc -1/2 (vgβ o q o ) 1/4 in free convection, where qo is the surface heat flux and β o is the thermal expansion of water. The work demonstrates that the aforementioned k L formulations can be recovered from a single structure function model derived for locally homogeneous and isotropic turbulence.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2019

Surface-functionalized polyolefin fibers and their use in methods for extracting metal ions from liquid solutions

A fiber useful in the absorption of metal ions from aqueous solutions, the fiber comprising a polyolefin backbone having a diameter of at least 1 micron and having covalently appended on its surface halogen atoms and vinyl-addition polymeric grafts functionalized with metal-binding groups, such as at least one functional group selected from carboxylate, keto, aldo, amino, imino, nitrile, amido, oxime, amidoxime, imide dioxime, and hydroxamate groups. The vinyl-addition polymeric grafts may also be further functionalized with hydrophilic groups different from the metal-binding groups, wherein the hydrophilic groups may be selected from carboxylate, sulfone, sulfonate, phosphonate, alkylammonium, iminium, amide, pyrrolidone, and polyalkyleneglycol groups. Also described are methods for producing the functionalized fibers, and methods for using the functionalized fiber, particularly in extracting metal ions from metal-containing solutions.

Dai, Sheng↗
DOE OSTI2018

Development of formalisms based on locally coupled open subsystems for calculations in molecular electronic structure and dynamics

Quantum embedding theories model a collection of interacting molecules as a set of subsystems, where each can be treated with a particular electronic structure method (wave function or density functional theory, for example); these theories can lead to computationally efficient and accurate algorithms. Motivated by challenges in the field, we previously described a formalism (that models two subsystems), which we call “locally coupled open subsystems” (LCOS), for the computation of ground-state energies, fractional electron-occupation numbers of the subsystems, and the size-consistent limit of subsystem dissociation. In this work we present the full (nonrelativistic) LCOS theory and the following extensions of our previous work: (i) the framework to study systems composed of multiple subsystems and a procedure to spin-adapt the auxiliary wave function that describes the partitioned system, so that its spin state matches that of the real system of interest; (ii) potential functionals and ideas to employ machine learning for the computation of ground-state densities and energies; (iii) formulation of two LCOS ground-state approaches where the fragments are assigned Kohn-Sham wave functions; and (iv) a time-dependent (TD) extension of these two ground-state formalisms in which the state of the subsystems evolves according to a unitary propagation; from this evolution we can extract TD electron populations of the fragments, for instance. We also discuss potential applications of the TD LCOS theory to linear photoabsorption and Raman spectroscopy. As a result, the developments presented in this work can lead to ground-state and TD electronic structure calculations where the computational scaling can be controlled, depending on the level of theory and the accuracy desired to model each one of the subsystems and their coupling.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2023

Quantum dynamics of non-Hermitian many-body Landau-Zener systems

Here, we develop a framework to solve a large class of linearly driven non-Hermitian quantum systems. Such a class of models in the Hermitian scenario is commonly known as multistate Landau-Zener models. The non-Hermiticity is due to the anti-Hermitian couplings between the diabatic levels. We find that there exists a conservation law, unique to this class of models, that describes the simultaneous growth of the unnormalized wave functions. These models have practical applications in Bose-Einstein condensates, and they can describe the dynamics of multispecies bosonic systems. The conservation law relates to a pair-production mechanism that explains the dissociation of diatomic molecules into atoms. We provide a general framework for both solvable and semiclassically solvable non-Hermitian Landau-Zener models. Our findings will open alternative avenues for a number of diverse emergent phenomena in explicitly time-dependent non-Hermitian quantum systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

A cautionary tale: Problems in the valence-CASSCF description of the ground state (X1Σ+) of BF

In the full optimized reaction space and valence-complete active space self-consistent field (vCAS) methods, a set of active orbitals is defined as the union of the valence orbitals on the atoms, all possible configurations involving the active orbitals are generated, and the orbitals and configuration coefficients are self-consistently optimized. Such wave functions have tremendous flexibility, which makes these methods incredibly powerful but can also lead to inconsistencies in the description of the electronic structure of molecules. In this paper, the problems that can arise in vCAS calculations are illustrated by calculations on the BH and BF molecules. BH is well described by the full vCAS wave function, which accounts for molecular dissociation and 2s–2p near-degeneracy in the boron atom. The same is not true for the full vCAS wave function for BF. There is mixing of core and active orbitals at short internuclear distances and swapping of core and active orbitals at large internuclear distances. In addition, the virtual 2π orbitals, which were included in the active space to account for the 2s–2p near degeneracy effect, are used instead to describe radial correlation of the electrons in the F2pπ-like pairs. Although the above changes lead to lower vCAS energies, they lead to higher vCAS+1+2 energies as well as irregularities and/or discontinuities in the potential energy curves. All of the above problems can be addressed by using the spin-coupled generalized valence bond-inspired vCAS wave function for BF, which includes only a subset of the atomic valence orbitals in the active space.

Xu, Lu T. (ORCID:0000000182064902)↗
DOE OSTI2024

Engineered mRNA–ribosome fusions for facile biosynthesis of selenoproteins

Ribosomes are often used in synthetic biology as a tool to produce desired proteins with enhanced properties or entirely new functions. However, repurposing ribosomes for producing designer proteins is challenging due to the limited number of engineering solutions available to alter the natural activity of these enzymes. In this study, we advance ribosome engineering by describing a novel strategy based on functional fusions of ribosomal RNA (rRNA) with messenger RNA (mRNA). Specifically, we create an mRNA–ribosome fusion called RiboU, where the 16S rRNA is covalently attached to selenocysteine insertion sequence (SECIS), a regulatory RNA element found in mRNAs encoding selenoproteins. When SECIS sequences are present in natural mRNAs, they instruct ribosomes to decode UGA codons as selenocysteine (Sec, U) codons instead of interpreting them as stop codons. This enables ribosomes to insert Sec into the growing polypeptide chain at the appropriate site. Our work demonstrates that the SECIS sequence maintains its functionality even when inserted into the ribosome structure. As a result, the engineered ribosomes RiboU interpret UAG codons as Sec codons, allowing easy and site-specific insertion of Sec in a protein of interest with no further modification to the natural machinery of protein synthesis. To validate this approach, we use RiboU ribosomes to produce three functional target selenoproteins in Escherichia coli by site-specifically inserting Sec into the proteins’ active sites. Overall, our work demonstrates the feasibility of creating functional mRNA–rRNA fusions as a strategy for ribosome engineering, providing a novel tool for producing Sec-containing proteins in live bacterial cells.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Measures of complexity and entanglement in many-fermion systems

There is no unique and widely accepted definition of the complexity measure (CM) of a many-fermion wave function in the presence of interactions. The simplest many-fermion wave function is a Slater determinant. In shell-model or configuration interaction (CI) and other related methods, the state is represented as a superposition of a large number of Slater determinants, which in the case of CI calculations reaches about 20 billion terms [Johnson, arXiv:1809.07869]. Although in practice this number has been used as a CM for decades, it is ill defined: it is not unique, and it depends on the particular type and the number of single-particle wave functions used to construct the Slater determinants. Further, the canonical wave functions and/or natural orbitals [Löwdin, Adv. Phys. 5, 1 (1956); Löwdin and Shull, Phys. Rev. 101, 1730 (1956); Bardeen et al., Phys. Rev. 108, 1175 (1957); N. N. Bogoljubov, Il Nuovo Cimento 7, 794 (1958); Valatin, Il Nuovo Cimento 7, 843 (1958); de Gennes, Superconductivity of Metals and Alloys (CRC Press, Boca Raton, FL, 1999); Ring and Schuck, The Nuclear Many-Body Problem, 1st ed. (Springer-Verlag, Berlin, 2004)] and their corresponding occupation probabilities are intrinsic properties of any many-body wave function, irrespective of the representation, and they provide a unique solution to characterize the CM. The non-negative orbital entanglement entropy, which vanishes for a Slater determinant, provides the simplest CM, while a more complete measure of complexity is the entanglement spectrum. We illustrate these aspects in the case of a complex nonequilibrium time-dependent process, induced nuclear fission described within a real-time density functional theory framework extended to superfluid systems, which can describe simultaneously the long-range and the short-range correlations between fermions. The orbital entanglement entropy of the fissioning nucleus illustrates the localization mechanism of the many-body wave function in Fock and/or Hilbert space. The (minimal) number of Slater determinants required to represent such a complex many-body wave function with a well-defined number of particles in the case presented here is about 10 500 . The realistic case of the highly nonequilibrium nuclear fission process illustrated here is equivalent to a system of 23.328×10 9 interacting quantum spin-1/2 particles, a very large system for the study of quantum entanglement.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Revealing quasi-excitations in the low-density homogeneous electron gas with model exchange–correlation kernels

Time-dependent density functional theory within the linear response regime provides a solid mathematical framework to capture excitations. The accuracy of the theory, however, largely depends on the approximations for the exchange–correlation (xc) kernels. Away from the long-wavelength (or q = 0 short wave-vector) and zero-frequency (ω = 0) limit, the correlation contribution to the kernel becomes more relevant and dominant over exchange. The dielectric function, in principle, can encompass xc effects relevant to describe low-density physics. Furthermore, besides collective plasmon excitations, the dielectric function can reveal collective electron–hole excitations, often dubbed “ghost excitons.” Besides collective excitons, the physics of the low-density regime is rich, as exemplified by a static charge-density wave that was recently found for r s > 69, and was shown to be associated with softening of the plasmon mode. These excitations are seen to be present in much higher density 2D homogeneous electron gases of r s ≳ 4. Here, in this work, we perform a thorough analysis with xc model kernels for excitations of various nature. The uniform electron gas, as a useful model of real metallic systems, is used as a platform for our analysis. We highlight the relevance of exact constraints as we display and explain screening and excitations in the low-density region.

36 MATERIALS SCIENCE↗
DOE OSTI2025

PAC in DESI. I. Galaxy stellar mass function into the 10 6 M ⊙ frontier

The Photometric objects Around Cosmic webs (PAC) method integrates cosmological photometric and spectroscopic surveys, offering valuable insights into galaxy formation. PAC measures the excess surface density of photometric objects, $\bar{n}_2w_{{\rm {p}}}$, with specific physical properties around spectroscopic tracers. In this study, we improve the PAC method to make it more rigorous and eliminate the need for redshift bins. We apply the enhanced PAC method to the DESI Y1 BGS Bright spectroscopic sample and the deep Dark Energy Camera Legacy Survey (DECaLS) photometric sample, obtaining $\bar{n}_2w_{{\mathrm {p}}}$ measurements across the complete stellar mass range, from $10^{5.3}$ to $10^{11.5}\,{\rm M}_{\odot }$ for blue galaxies, and from $10^{6.3}$ to $10^{11.9}\,{\rm M}_{\odot }$ for red galaxies. We combine $\bar{n}_2w_{{\rm {p}}}$ with $w_{{\rm {p}}}$ measurements from the BGS sample, which is not necessarily complete in stellar mass. Assuming that galaxy bias is primarily determined by stellar mass and colour, we derive the galaxy stellar mass functions (GSMFs) down to $10^{5.3}\,{\rm M}_{\odot }$ for blue galaxies and $10^{6.3}\,{\rm M}_{\odot }$ for red galaxies, while also setting lower limits for smaller masses. The blue and red GSMFs are well described by single and double Schechter functions, respectively, with low-mass end slopes of $\alpha _{\rm {blue}}=-1.54^{+0.02}_{-0.02}$ and $\alpha _{\rm {red}}=-2.50^{+0.08}_{-0.08}$, resulting in the dominance of red galaxies below $10^{7.6}\,{\rm M}_{\odot }$. Stage-IV cosmological photometric surveys, capable of reaching 2–3 mag deeper than DECaLS, present an opportunity to explore the entire galaxy population in the local universe with PAC. This advancement allows us to address critical questions regarding the nature of dark matter, the physics of reionization, and the formation of dwarf galaxies.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

A Strong-QCD Regime Measurement of the Proton’s Spin Structure

The theory of the strong force, Quantum Chromodynamics (QCD) remains one of the most important ways to understand the fundamental properties of ordinary matter. However, at low momentum transfer Q 2 , in the regime where the strong force becomes extremely strong, our understanding of QCD for ordinary nucleons becomes hazy. Several cutting edge theories such as Chiral Perturbation Theory (χPT) and Lattice QCD have provided valuable predictions in this regime, but Lattice QCD has not yet extended predictions of many important quantities to this kinematic region, and Chiral Perturbation Theory has faced several important disagreements with experimental data for the neutron over the last several decades. It is therefore of extreme importance to have a benchmark of experimental data in the low energy regime for the proton’s behavior, as a test of leading theories for the behavior of QCD in this regime. The E08-027 (g2p) experiment ran at Jefferson Lab in 2012 with the goal of collecting this valuable data, and though I was still completing my undergraduate studies at the time, I became involved in the analysis in 2015 and built on the previous work to complete it and analyze the exciting results. This experiment achieved a high precision measurement of the spin structure functions g1 and g2 for the proton, quantities which describe the internal spin structure of the proton. These measurements were taken in the valuable low Q 2 region described above, and used to extract several moments of these spin structure functions which can be directly compared to the cutting-edge predictions of Chiral Perturbation Theory. Though the experiment’s timeline was such that I didn’t have a chance to work directly on the experimental setup, I had the opportunity to acquire hands-on experience working on a polarized target at UNH which is very similar to the crucial polarized target used in the g2p experiment. Full details of the g2p experiment and my experimental work at the University of New Hampshire are presented in this thesis, as well as a detailed description of the analysis process and the exciting benchmark results, which serve as a direct test of all current and future theories of QCD in the low-Q 2 regime.

Ruth, David↗
DOE OSTI2021

Finite-size correction for slab supercell calculations of materials with spontaneous polarization

Abstract The repeated slab approach has become a de facto standard to accurately describe surface properties of materials by density functional theory calculations with periodic boundary conditions. For materials exhibiting spontaneous polarization, we show that the conventional scheme of passivation with pseudo hydrogen is unable to realize a charge-neutral surface. The presence of a net surface charge induces via Gauss’s law a macroscopic electric field through the slab and results in poor size convergence with respect to the thickness of the slab. We propose a modified passivation method that accounts for the effect of spontaneous polarization, describes the correct bulk limits and boosts convergence with respect to slab thickness. The robustness, reliability, and superior convergence of energetics and electronic structure achieved by the proposed method are demonstrated using the example of polar ZnO surfaces.

Chemistry↗
DOE OSTI2025

Measurements of W + W − production cross-sections in pp collisions at $\sqrt{s}=13$ TeV with the ATLAS detector

Measurements of W + W − → e ± νμ ∓ ν production cross-sections are presented, providing a test of the predictions of perturbative quantum chromodynamics and the electroweak theory. The measurements are based on data from pp collisions at $\sqrt{s}$ = 13 TeV recorded by the ATLAS detector at the Large Hadron Collider in 2015–2018, corresponding to an integrated luminosity of 140 fb −1 . The number of events due to top-quark pair production, the largest background, is reduced by rejecting events containing jets with b-hadron decays. An improved methodology for estimating the remaining top-quark background enables a precise measurement of W + W − cross-sections with no additional requirements on jets. The fiducial W + W − cross-section is determined in a maximum-likelihood fit with an uncertainty of 3.1%. The measurement is extrapolated to the full phase space, resulting in a total W + W − cross-section of 127 ± 4 pb. Differential cross-sections are measured as a function of twelve observables that comprehensively describe the kinematics of W + W − events. The measurements are compared with state-of-the-art theory calculations and excellent agreement with predictions is observed. A charge asymmetry in the lepton rapidity is observed as a function of the dilepton invariant mass, in agreement with the Standard Model expectation. A CP-odd observable is measured to be consistent with no CP violation. Limits on Standard Model effective field theory Wilson coefficients in the Warsaw basis are obtained from the differential cross-sections.

Accelerator Physics↗
DOE OSTI2019

A semiempirical effective Hamiltonian based approach for analyzing excited state wave functions and computing excited state absorption spectra using real-time dynamics

We describe a new approach to extract information about an excited state wave function using a reduced orbital space molecular orbital (MO) decomposition approach for time-dependent density obtained from real-time dynamics. We also show how this information about the excited state wave function can be used to accelerate the convergence of real-time spectra and model excited state electron dynamics. We have combined this approach with our recent implementation of the real-time INDO/S method to study the solvatochromic shift of Nile Red in acetone, ethanol, toluene and n-hexane solvents and, for the first time, the excited state absorption (ESA) spectra of coronene, 5,10,15,20-tetra(4-pyridyl)porphyrin (TPyP), zinc phthalocyanine (ZnPc), and nickel TPyP using a semiempirical Hamiltonian.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Exploring the Nucleon Structure via Deep Electroproduction Processes

Understanding the internal structure of the nucleon is a fundamental goal of modern physics, which aims at a comprehensive framework describing the internal dynamics of quarks and gluons. Among other structure functions, Generalized Parton Distributions (GPDs) offer a powerful framework for describing the nucleon dynamics by correlating the longitudinal momentum and the transverse position of its internal partons. Such a correlation provides a three-dimensional picture of the nucleon and enables access to fundamental properties, including the internal pressure distributions and the parton’s angular momentum contribution to the nucleon's total spin, thereby playing a central role in resolving the nucleon spin puzzle. At the Thomas Jefferson National Facility (JLab), polarized electron beam experiments allow for probing GPDs through the measurement of hard exclusive processes. Among the cleanest experimental channels, we find the electro-production of a real photon through the Deeply Virtual Compton Scattering (DVCS) mechanism. The first data-taking period of the CLAS12 program, taking place in 2018, allowed for unique DVCS Beam Spin Asymmetry (BSA) measurements in the phase space covered by a 10.6 GeV polarized electron beam impinging on an unpolarized liquid hydrogen target. Although detecting all final-state particles ensures exclusivity of the process, conservation laws indicate that it is not mandatory. I adopt an approach omitting the direct detection of the recoil proton, providing a simplified yet effective event selection strategy that boosts statistics and gives access to a larger phase space sensitive to the underlying GPD dynamics through BSA and cross section measurements. The Double DVCS (DDVCS) process promises a dedicated mapping of GPDs. Contributing to the electro-production of a lepton pair cross-section, the DDVCS reaction extends DVCS by allowing the final-state photon to be virtual, enriching the kinematic phase space and providing unique access to the internal correlations encoded by GPDs. A feasibility study is conducted to assess the potential of future DDVCS measurements at Jefferson Lab and the future Electron-Ion Collider (EIC). While Jefferson Lab will provide DDVCS measurements in the valence region through the SoLID$\mu$ and $\mu$CLAS12 experimental projects, in the long term, the EIC will provide complementary measurements in the sea region, both accessing unprecedented information about GPDs in a phase space region otherwise inaccessible. Taken together, these investigations demonstrate both the current capabilities and future opportunities for probing GPDs through exclusive processes. The experimental analysis of DVCS at CLAS12 provides precise measurements within an established framework, while the phenomenological study of DDVCS opens the door to richer and more comprehensive explorations with future detectors and facilities.

Alvarado, Juan [Université Paris-Saclay: Gif-sur-Y↗
DOE OSTI2025

Inference of response functions with the help of machine-learning algorithms

Response functions are a key quantity to describe the near-equilibrium dynamics of strongly interacting many-body systems. Recent techniques that attempt to overcome the challenges of calculating these ab initio have employed expansions in terms of orthogonal polynomials. We employ a neural network prediction algorithm to reconstruct a response function 𝑆⁡(𝜔) defined over a range in frequencies 𝜔. Here, we represent the calculated response function as a truncated Chebyshev series whose coefficients can be optimized to reduce the representation error. We compare the quality of response functions obtained using coefficients calculated using a neural network (NN) algorithm with those computed using the Gaussian integral transform (GIT) method. In the regime where only a small number of terms in the Chebyshev series are retained, we find that the NN scheme outperforms the GIT method.

Kurkcuoglu, Doga Murat [Fermi National Accelerator↗
DOE OSTI2025

High-Entropy Alloys for Accelerator Beam Window Applications

Development of novel high-entropy alloys (HEAs) is currently underway for potential use as beam windows in future multi-megawatt target systems at Fermilab. HEAs encompass a new class of materials with a vast design space allowing for material properties to be tailored for particular applications and to potentially offer improved resistance to beam-induced radiation damage and thermal shock effects. The alloy systems being studied consist of several compositions of AlCoCrMnTiV with 4 6 component elements. These alloys are all predicted by CALPHAD simulation to have a single-phase BCC crystal structure and low density, with some compositions displaying ordered, nanoscale precipitates. This presentation will briefly discuss alloy design and synthesis before giving a detailed description of the characterization studies of these HEAs in both the pristine state and post-irradiation by low-energy heavy ions to high damage levels. Electron microscopy techniques to quantify elemental homogeneity and composition, determine grain size, shape, and orientation, and quantify lattice parameters, defect structures and precipitate phases are all being used to study alloy microstructures. Mechanical properties of the alloys at the microscale will be reported. The evolution of these properties as a function of radiation damage will also be described. Bulk thermal characteristics of these HEAs have been tested to measure specific heat capacity and coefficient of thermal expansion as a function of temperature. To determine bulk tensile properties a miniature tensile testing apparatus is under development; it s commissioning will be covered briefly. The talk will conclude with our plans for alloy down-selection.

Burleigh, A. [Fermilab]↗
DOE OSTI2021

Omics Approaches for Understanding Biogenesis, Composition and Functions of Fungal Extracellular Vesicles

Extracellular vesicles (EVs) are lipid bilayer structures released by organisms from all kingdoms of life. The diverse biogenesis pathways of EVs result in a wide variety of physical properties and functions across different organisms. Fungal EVs were first described in 2007 and different omics approaches have been fundamental to understand their composition, biogenesis, and function. In this review, we discuss the role of omics in elucidating fungal EVs biology. Transcriptomics, proteomics, metabolomics, and lipidomics have each enabled the molecular characterization of fungal EVs, providing evidence that these structures serve a wide array of functions, ranging from key carriers of cell wall biosynthetic machinery to virulence factors. Omics in combination with genetic approaches have been instrumental in determining both biogenesis and cargo loading into EVs. We also discuss how omics technologies are being employed to elucidate the role of EVs in antifungal resistance, disease biomarkers, and their potential use as vaccines. Finally, we review recent advances in analytical technology and multi-omic integration tools, which will help to address key knowledge gaps in EVs biology and translate basic research information into urgently needed clinical applications such as diagnostics, and immuno- and chemotherapies to fungal infections.

59 BASIC BIOLOGICAL SCIENCES↗