Search NASA⌕ Search

SEARCH · Search NASA

Results for “Dynamic properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

Role of phonon softening induced by anisotropic fluctuations in the enhanced mobility at free glassy surfaces

The surface of a glassy material exhibits enhanced mobility compared to the bulk counterpart, however the underlying mechanism for this remains elusive. Herein, we present studies of the dynamical properties of a prototypical glass-forming metallic liquid Zr 50 Cu 50 as a function of the distance from both the free surface and pinned surface using molecular dynamics simulations. We found that the surface mobility increases gradually on approaching the free surface, with a concomitant increase of the non-Gaussianity. The phonon density of states at the free surface exhibits lower characteristic frequencies than in the bulk and pinned surface. These findings suggest phonon softening caused by anisotropic fluctuations at free surfaces as an alternative physical mechanism leading to the enhanced dynamics at free glassy surfaces from the perspective of collective excitations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Command of active and responsive elastomers by topological defects and patterns

The project resulted in the development of stimuli-responsive elastomer coatings formed by photopolymerized liquid crystal molecules. The molecular orientation of the liquid crystal elastomers is coupled to rubber-like elasticity. The project developed an approach to produce complex patterns of molecular orientation in elastomers by employing photopatterning technique based on plasmonic metamasks that convert unpolarized incoming light into a transmitted light beam with spatially-varying linear polarization. The polarization-modulated light beam aligns the film of azodye molecules, which serves as the substrate for liquid crystal elastomer coating. The alignment of the azodye molecules follows the polarization pattern with a phase shift of the alignment direction by 90 degrees. The azodye substrate imposes orientation of molecules in the adjacent liquid crystal layer which is preserved after the monomers are polymerized into a liquid crystal elastomer. By using differently aligned substrates one could produce various patterns of molecular orientation in the elastomer, which dictate the mechanical properties of the elastomers and their response to external stimuli such as temperature, humidity, and ultraviolet irradiation. In particular, the predesigned molecular orientation produces deterministically defined topography response of the liquid crystal coatings, in which their free surface changes from flat to either locally elevated or locally compressed, depending on whether the pre-inscribed molecular orientation is predesigned with a splay or bend deformation. The research established that the mechanism of this deterministic relation between the dynamic topography and pre-inscribed molecular orientation is rooted in the change of the tensorial order parameter that characterizes the degree of orientational order, and in the contraction/expansion of polymer molecules in response to the order parameter changes. In particular, lowering the order causes contraction of polymer globules. The work demonstrated that the dynamic topography of elastomer coatings with three-dimensional pattern of orientational order includes up and down motion of the material (along the normal to the coating) and also shifts in lateral directions. We demonstrate that the deterministic relationship between the orientational patterns and variations of coatings’ profile is caused by forces that are mathematically equivalent to active forces in the system of “pullers” or “pushers” in active matter, demonstrating universality of the out-of-equilibrium behavior. The project resulted in theoretical models that predictively describe the dynamic response of coatings. The topography of liquid crystal elastomers is sensitive to stimuli such as temperature, ultraviolet irradiation, and humidity. The applicability of the patterned approach to produce dynamic coatings was expanded from nematic elastomers to their smectic counterparts. The project combined a battery of imaging techniques to unveil the dynamic properties of the coatings, ranging from the state-of-the-art dynamic holographic microscopy to fluorescent confocal polarizing microscopy and polscope microscopy. The research uncovered potential applications of dynamic elastomer coatings, such as control placement of colloidal particles, engineering of living tissues with alignment patterns of cells that follow the orientational order of elastomer coatings. The approach developed in the project can be used to design programmable dynamic coatings with functionalities that mimic biological tissues such as skin.

36 MATERIALS SCIENCE↗

Resonant interaction between phonons and PbTe/PbSe (001) misfit dislocation networks

Here this work aims at a quantitative and mechanistic understanding of the dynamic process of the phonon-dislocation interaction in PbTe/PbSe (001) heterostructures using the Concurrent Atomistic-Continuum (CAC) method as the simulation tool. The misfit dislocation network and the atomic-scale dislocation core structure obtained in the simulations are found to agree reasonably well with the experimental observations of the PbTe/PbSe (001) interface. Through visualizing the dynamic interaction between phonons and dislocations, as well as quantifying the dislocation vibration amplitude, the phonon energy transmission, and the thermal resistance of the misfit interfaces, this work has illustrated and quantified two mechanisms for phonon-dislocation interaction: (1) phonon scattering by the strain field of dislocations, and (2) phonon scattering by dislocations that vibrate via the local modes of a dislocation network; the latter, leads to resonant phonon-dislocation interaction, which is manifested as local maxima of out-of-phase vibration of the atoms on the two sides of the slip plane, leading to local minima of the energy transmission in the heterostructure that contains one interface. The local vibrational modes are found to be excited only by shear stress induced by transverse phonons. Among various resonant modes, the one with the lowest frequency has the strongest effect. This work has also demonstrated the collective motion of dislocations under ultrafast phonon pulses. In addition, the dynamic properties of the misfit dislocation network localized within one interface are found to be significantly altered by the presence of misfit dislocations at other interfaces, thus further confirming the cooperative dynamic nature of the motion of dislocations and phonons.

36 MATERIALS SCIENCE↗

Function of the hydration layer around an antifreeze protein revealed by atomistic molecular dynamics simulations

Atomistic molecular dynamics simulations are used to investigate the mechanism by which the antifreeze protein from the spruce budworm, Choristoneura fumiferana, binds to ice. Comparison of structural and dynamic properties of the water around the three faces of the triangular prism-shaped protein in aqueous solution reveals that at low temperature the water structure is ordered and the dynamics slowed down around the ice-binding face of the protein, with a disordering effect observed around the other two faces. These results suggest a dual role for the solvation water around the protein. The preconfigured solvation shell around the ice-binding face is involved in the initial recognition and binding of the antifreeze protein to ice by lowering the barrier for binding and consolidation of the protein:ice interaction surface. Thus, the antifreeze protein can bind to the molecularly rough ice surface by becoming actively involved in the formation of its own binding site. Also, the disruption of water structure around the rest of the protein helps prevent the adsorbed protein becoming covered by further ice growth.

59 BASIC BIOLOGICAL SCIENCES↗

Bond-dependent anisotropy and magnon decay in cobalt-based Kitaev triangular antiferromagnet

Following tremendous success of the graphene-derived fundamental and applied research, the magnetic van der Waals materials that can be cleaved into monolayer two-dimensional atomic crystals have emerged as a new platform in the studies of low-dimensional physics and in the design of artificial heterostructures with novel properties. Because of that, the family of dihalides and trihalides of the 3d transition group receive a strong renewed interest. Together with our experimental collaborators, we have investigated the novel dynamical properties of one of such promising material CoI 2 , and demonstrated that spin excitations in it are prone to substantial breakdown and complex level repulsion, the important quantum effects whose theoretical understanding has been significantly advanced by our group in the last two decades. Both phenomena are dramatically revealed by experiments and verified by the theory in our joint study, published in Nature Physics. Altogether, our results pave the way toward a new research direction for the magnetic van der Waals materials.

36 MATERIALS SCIENCE↗

Thermodynamical study of boron doped CeX{sub 3} (X=Pd, Rh)

The structural, electronic, thermal, and optical properties of cubic non magnetic CeX{sub 3}(X=Pd, Rh) compounds which crystallize in the Au{sub 3}Cu structure have been studied using the projected augmented wave (PAW) method within the density functional theory (DFT) with generalized gradient approximation (GGA) for exchange correlation potential. In this paper we have calculated the band structure which are interpreted using the density of states. The optical properties such as extinction coefficients clearly illustrate the changes in CeX{sub 3} due to intercalation of boron. Lattice instability is observed in CePd{sub 3}B from the calculated dynamical properties.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Study of vibrational modes and specific heat of wurtzite phase of BN

In these days of nanotechnology the materials like BN is of utmost importance as in hexagonal phase it is among hardest materials. The phonon mode study of the materials is most important factor to find structural and thermodynamcal properties. To study the phonons de launey angular force (DAF) constant model is best suited as it involves many particle interactions. Therefore in this presentation we have studied the lattice dynamical properties and specific heat of BN in wurtzite phase using DAF model. The obtained results are in excellent agreement with existing results.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Switching between the mode-locking and Q-switching modes in two-section QW lasers upon a change in the absorber properties due to the Stark effect

The passive Q-switching and mode-locking modes are implemented in two-section lasers with three quantum wells. It is demonstrated that raising the reverse bias on the absorbing section changes its spectral and dynamic properties and, accordingly, leads to a change from the Q-switching mode to mode-locking. The pulse-repetition frequency in the mode-locking mode is 75 GHz, with the product of the pulse duration by the spectrum bandwidth being 0.49, which is close to the theoretical limit. It is shown that, in structures with three quantum wells, strong absorption at the lasing wavelength gives rise to a photocurrent across a section of the saturable absorber, which is sufficient for compensation of the applied bias.

36 MATERIALS SCIENCE↗

Physical and nonclassical properties of the interaction between a four-level atom and field in coherent state of Morse potential

The quantum system of the field initially defined by the k-photon-added Morse potential coherent states (MPCSs) of the radiation field interacting with a four-level atom (FLA) was studied. The physical and non-classical properties of the field defined by the MPCS system were quantified using the Mandel parameter. The effect of time-dependent coupling (TDC) on the atomic speed was examined. Moreover, the dynamic properties of the non-local correlation between the FLA and MPCS radiation field were studied and compared with those of the geometric phase. We also investigated the influence of the initial interaction conditions and different system parameters on the evolution of the non-local correlation, Mandel parameter, and geometric phase. The relationships between the geometric phase, Mandel parameter, and non-local correlation with TDC were explored.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Characterizing the Interaction of Pt and PtRu Clusters with Boron-Doped, Nitrogen-Doped, and Activated Carbon: Density Functional Theory Calculations and Parameterization

Previous density functional theory calculations of Pt and PtRu clusters on carbon supports have shown that the adsorption energies of these metal clusters increase substantially with substitutional boron defects in the carbon lattice. Here, the stability of metal clusters is further probed with substitutional nitrogen defects and surface functional groups. Also, the dynamics of Pt and Ru atoms on pure and boron-doped carbon are studied as a function of temperature using ab initio molecular dynamics (AIMD) simulations. Although the time scale accessible is limited, the AIMD simulations show reduced mobility on the boron-doped surface. In order to calculate additional dynamic properties of the systems, such as diffusion coefficients, the motion of the metal clusters should be studied for much longer periods of time, which can be accomplished by performing classical molecular dynamics (MD) simulations. Thus, we have parametrized our electronic structure calculations to an analytical Lennard-Jones (LJ) potential function, which will enable much longer time and length scales to be simulated in future investigations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

MaNGA DynPop – I. Quality-assessed stellar dynamical modelling from integral-field spectroscopy of 10K nearby galaxies: a catalogue of masses, mass-to-light ratios, density profiles, and dark matter

ABSTRACT This is the first paper in our series on the combined analysis of the Dynamics and stellar Population (DynPop) for the MaNGA survey in the final SDSS Data Release 17 (DR17). Here, we present a catalogue of dynamically determined quantities for over 10 000 nearby galaxies based on integral-field stellar kinematics from the MaNGA survey. The dynamical properties are extracted using the axisymmetric Jeans Anisotropic Modelling (JAM) method, which was previously shown to be the most accurate for this kind of study. We assess systematic uncertainties using eight dynamical models with different assumptions. We use two orientations of the velocity ellipsoid: either cylindrically aligned JAMcyl or spherically aligned JAMsph. We also make four assumptions for the models’ dark versus luminous matter distributions: (1) mass-follows-light, (2) free NFW dark halo, (3) cosmologically constrained NFW halo, (4) generalized NFW dark halo, i.e. with free inner slope. In this catalogue, we provide the quantities related to the mass distributions (e.g. the density slopes and enclosed mass within a sphere of a given radius for total mass, stellar mass, and dark matter mass components). We also provide the complete models which can be used to compute the full luminous and mass distribution of each galaxy. Additionally, we visually assess the qualities of the models to help with model selections. We estimate the observed scatter in the measured quantities which decreases as expected with improvements in quality. For the best data quality, we find a remarkable consistency of measured quantities between different models, highlighting the robustness of the results.

Astronomy & Astrophysics↗

Nuclear Fuel and Pu Redox Studies from The Glenn T. Seaborg Institute at Idaho National Laboratory

The Glenn T. Seaborg Institute at Idaho National Laboratory (INL-GTSI) focuses on advancing fundamental research in the actinide sciences by providing unique opportunities to early career scientists and engineers to gain experience studying the actinide elements and their associated systems. The INL-GTSI is built from three focus areas that are based on the expertise and supporting infrastructure at INL and include solid state chemistry and physics, solution phase chemistry and physics, and forensic and isotope science. INL is the lead Laboratory for nuclear energy research and development in the U. S. and the research on nuclear fuels performed under the INL-GTSI gives good examples of solid state studies. Uranium-Molybdenum (U-Mo) alloys are leading fuel candidates for conversion of high performance research and test reactors to low-enriched fuels. During irradiation, generated fission gas accumulates into bubbles and self-organizes into a gas bubble superlattice (GBS) that effectively stores fission gases and inhibits fuel swelling. A study on the early self- organizing behavior of the GBS shows that not only grain boundaries but the interfaces between the U-Mo matrix and uranium carbide (UC) impurities are important to GBS formation.[1] In solution, understanding the complex redox behavior of plutonium in aqueous environments is critical for establishing optimized nuclear waste reprocessing solvent systems and storage tank environments. INL-GTSI researchers have produced an experimentally validated multi-scale model of the gamma radiation induced behavior of plutonium ions in concentrated aqueous HNO3 solutions.[2] Here, gamma radiation effected only minimal steady state changes in the redox distribution of the plutonium oxidation states. The redox cycling between Pu(IV) and Pu(III) is demonstrated to be mediated by the •OH/NO3• radical oxidation of Pu(III) and the H2O2/HNO3 driven reduction of Pu(IV). The INL-GTSI offers young researchers the unique chance to work directly with actinide bearing materials in a U. S. National Laboratory environment. Further topical areas of interest to the INL-GTSI include, but are not limited to, fundamental actinide properties, structure/property (electronic, magnetic, thermal) relations, actinide quantum criticality, f- electron interactions, electron correlations, computational studies, new phases, defect effects, interface interactions, isotope production and separation, forensic analytical chemistry, structure and dynamic properties of actinides in non-aqueous media, separations chemistry and kinetics for advanced nuclear fuel cycles, radiation effects, and innovative and advanced ligand design for complexation of the actinides.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Probing many-body dynamics in a two-dimensional dipolar spin ensemble

Abstract The most direct approach for characterizing the quantum dynamics of a strongly interacting system is to measure the time evolution of its full many-body state. Despite the conceptual simplicity of this approach, it quickly becomes intractable as the system size grows. An alternate approach is to think of the many-body dynamics as generating noise, which can be measured by the decoherence of a probe qubit. Here we investigate what the decoherence dynamics of such a probe tells us about the many-body system. In particular, we utilize optically addressable probe spins to experimentally characterize both static and dynamical properties of strongly interacting magnetic dipoles. Our experimental platform consists of two types of spin defects in nitrogen delta-doped diamond: nitrogen-vacancy colour centres, which we use as probe spins, and a many-body ensemble of substitutional nitrogen impurities. We demonstrate that the many-body system’s dimensionality, dynamics and disorder are naturally encoded in the probe spins’ decoherence profile. Furthermore, we obtain direct control over the spectral properties of the many-body system, with potential applications in quantum sensing and simulation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Distinct Binding of Rhenium Catalysts on Nanostructured and Single-Crystalline TiO 2 Surfaces Revealed by Two-Dimensional Sum Frequency Generation Spectroscopy

High surface area TiO 2 electrodes are extensively used in photocatalytic solar cells. However, it remains controversial how molecular catalysts interact with the TiO 2 surfaces and how the electrodes affect the functionality of catalytic adsorbates. In this study, we examine the CO 2 reduction catalyst Re I (dcbpy)(CO) 3 Cl (dcbpy = 4,4'-dicarboxy-2,2'-bipyridine) on TiO 2 by probing spectroscopically isolated carbonyl modes that are highly sensitive to the complex electronic structure and solvation environment. Combining interferometric two-dimensional sum frequency generation spectroscopy and ab initio simulations of the spectra, we find distinct spectroscopic and dynamical properties of catalysts bound to single crystals and nanocrystalline surfaces. Lastly, different cross-peak patterns resulting from interferences between elements of the fourth-order susceptibility, along with different vibrational relaxation dynamics, reveal distinct vibrational relaxation pathways of the catalysts on different TiO 2 surfaces that could be engineered for selective catalytic performance.

36 MATERIALS SCIENCE↗

EVOLUTIONARY STATUS OF 85 PEGASI

We have investigated the evolutionary status of the visual binary 85 Peg (HD 224930) using a high-resolution spectroscopic analysis and the astrometric calibration of the stellar parameters. In spite of well-determined stellar parameters from HIPPARCOS astrometry and from spectroscopy, 85 Peg has for a long time revealed peculiar properties when attempts have been made to combine an evolutionary model with observation. There has been a chronic problem of the mass ratio of the two components when comparing 85 Peg's dynamical properties to the photometric magnitude difference. Moreover, 85 Peg has been suspected to have unique characteristics in its chemical composition. In order to determine accurate spectroscopic abundances, we have obtained high-resolution echelle spectra for 85 Peg. From our elemental analysis, we found that 85 Peg is alpha-enhanced with respect to the scaled solar abundance by a factor of 2. We then produced, within the framework of the standard stellar theory, grids of stellar model using the most recent observational results. To avoid many-fold degeneracy among physical quantities, a statistical minimization test was carried out between theoretical model grids. Enforcing consistency between the modeling and statistical constraints, we derived a reliable set of physical parameters and confirmed the trinarity of the system. In the context of asteroseismology, the theoretical frequency spectrum of 85 Peg was calculated. 85 Peg A is expected to have a first order spacing {Delta}{nu} {approx} 165 {mu}Hz at the reference frequency {nu}{sub 0} = 790 {mu}Hz.

79 ASTRONOMY AND ASTROPHYSICS↗

MASSIVE GALAXIES AT HIGH z: ASSEMBLY PATTERNS, STRUCTURE, AND DYNAMICS IN THE FAST PHASE OF GALAXY FORMATION

Relaxed, massive galactic objects have been identified at redshifts z = 4, 5, and 6 in hydrodynamical simulations run in a large cosmological volume. This allowed us to analyze the assembly patterns of the high-mass end of the galaxy distribution at these high z's, by focusing on their structural and dynamical properties. Our simulations indicate that massive objects at high redshift already follow certain scaling relations. These relations define virial planes at the halo scale, whereas at the galactic scale they define intrinsic dynamical planes that are, however, tilted relative to the virial plane. Therefore, we predict that massive galaxies must lie on fundamental planes from their formation. We briefly discuss the physical origin of the tilt in terms of the physical processes underlying massive galaxy formation at high z, in the context of a two-phase galaxy formation scenario. Specifically, we have found that it lies on the different behavior of the gravitationally heated gas as compared with cold gas previously involved in caustic formation and the mass dependence of the energy available to heat the gas.

79 ASTRONOMY AND ASTROPHYSICS↗

Multiscale molecular simulations for the solvation of lignin in ionic liquids

Lignin, the second most abundant biopolymer found in nature, has emerged as a potential source of sustainable fuels, chemicals, and materials. Finding suitable solvents, as well as technologies for efficient and affordable lignin dissolution and depolymerization, are major obstacles in the conversion of lignin to value-added products. Certain ionic liquids (ILs) are capable of dissolving and depolymerizing lignin but designing and developing an effective IL for lignin dissolution remains quite challenging. To address this issue, the COnductor-like Screening MOdel for Real Solvents (COSMO-RS) model was used to screen 5670 ILs by computing logarithmic activity coefficients (ln(γ)) and excess enthalpies (H E ) of lignin, respectively. Based on the COSMO-RS computed thermodynamic properties (ln(γ) and H E ) of lignin, anions such as acetate, methyl carbonate, octanoate, glycinate, alaninate, and lysinate in combination with cations like tetraalkylammonium, tetraalkylphosphonium, and pyridinium are predicted to be suitable solvents for lignin dissolution. The dissolution properties such as interaction energy between anion and cation, viscosity, Hansen solubility parameters, dissociation constants, and Kamlet–Taft parameters of selected ILs were evaluated to assess their propensity for lignin dissolution. Furthermore, molecular dynamics (MD) simulations were performed to understand the structural and dynamic properties of tetrabutylammonium [TBA] + -based ILs and lignin mixtures and to shed light on the mechanisms involved in lignin dissolution. MD simulation results suggested [TBA] + -based ILs have the potential to dissolve lignin because of their higher contact probability and interaction energies with lignin when compared to cholinium lysinate.

09 BIOMASS FUELS↗

Theory of open quantum systems with bath of electrons and phonons and spins: Many-dissipaton density matrixes approach

This work establishes a strongly correlated system-and-bath dynamics theory, the many-dissipaton density operators formalism. It puts forward a quasi-particle picture for environmental influences. This picture unifies the physical descriptions and algebraic treatments on three distinct classes of quantum environments, electron bath, phonon bath, and two-level spin or exciton bath, as their participating in quantum dissipation processes. Dynamical variables for theoretical description are no longer just the reduced density matrix for system, but remarkably also those for quasi-particles of bath. The present theoretical formalism offers efficient and accurate means for the study of steady-state (nonequilibrium and equilibrium) and real-time dynamical properties of both systems and hybridizing environments. It further provides universal evaluations, exact in principle, on various correlation functions, including even those of environmental degrees of freedom in coupling with systems. Induced environmental dynamics could be reflected directly in experimentally measurable quantities, such as Fano resonances and quantum transport current shot noise statistics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗