Search NASA⌕ Search

SEARCH · Search NASA

Results for “EVAPORATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

How the Universe postpones the evaporation and curtails the quantum spreading of black holes

Black holes are expected to evaporate through the process of Hawking radiation. This process is expected to cause the uncertainty in a black hole’s position to grow to ~ $M^4/M^3_{pl}$ over the course of it’s lifetime, even as its momentum spreads only by ~ $M_{Pl}$ For the black holes that have been observed, which have M ≥ M ⊙ this greatly exceeds the Hubble volume. However, the decay of black holes and their quantum spreading, are delayed in the Universe while the influx of energy into the black holes exceeds their Hawking luminosity. We show that for these M ≥ M ⊙ black holes, their decay outside galaxies and clusters is prevented far longer than it takes the black holes to be dragged well beyond the Hubble horizon, where their eventual decay occurs away from the prying eyes of any observer who has not hitched a ride with them. Meanwhile, black holes in an observer’s galaxy or cluster are themselves prevented from decaying long past the extinction of the last stars, and at least until their galaxy/cluster is swept clean of dark matter, in $\gg$ 10 25 y. Even then, if the black holes become unbound, then they are dragged beyond the Hubble radius before undergoing significant decay; if not, they remain in bound orbits, spreading at most over a subvolume of the galaxy/cluster, and long localized by scatterings to much smaller volumes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Single phonon detection for dark matter via quantum evaporation and sensing of He 3

Dark matter is five times more abundant than ordinary visible matter in our Universe. While laboratory searches hunting for dark matter have traditionally focused on the electroweak scale, theories of low mass hidden sectors motivate new detection techniques. Extending these searches to lower mass ranges, well below 1 GeV / c 2 , poses new challenges as rare interactions with standard model matter transfer progressively less energy to electrons and nuclei in detectors. Here, we propose an approach based on phonon-assisted quantum evaporation combined with quantum sensors for detection of desorption events via tracking of spin coherence. The intent of our proposed dark matter sensors is to extend the parameter space to energy transfers in rare interactions to as low as a few meV for detection of dark matter particles in the keV / c 2 mass range. Published by the American Physical Society 2024

79 ASTRONOMY AND ASTROPHYSICS↗

𝐽/𝜓 photoproduction and polarization in 𝑒 + 𝑝 collisions in the improved color evaporation model

We calculate the production and polarization of direct 𝐽/𝜓 in the improved color evaporation model in 𝑒 + 𝑝 photoproduction. We present the production as functions of transverse momentum, mass of the hadronic final state, and inelasticity. We also present the polarization parameters 𝜆 𝜗 , 𝜆 𝜑 , and 𝜆 𝜗⁢𝜑 in the helicity and the Collins-Soper frames, as well as the frame-invariant polarization parameter $\tilde{𝜆}$ as a function of transverse momentum and inelasticity. We find agreement with both 𝐽/𝜓 unpolarized cross sections and the invariant polarization parameters as a function of 𝑝𝑇.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Post-Deposition Recrystallization of Co-Evaporated CuIn x Ga (1-x) Se 2 Films by Bromide Vapor Treatments

CIGS films deposited at 400°C onto molybdenum-coated soda-lime glass substrates by co-evaporation were annealed in InBr 3 vapors or CuBr with Se vapors. The treatments were conducted at 400°C, 450°C, or 500°C for one hour. The InBr 3 treatments above 400°C and CuBr with Se treatments at 500°C resulted in increased grain size, improved crystallinity, and a decrease in Cu 2 Se phase. Annealed samples also exhibited large surface facets. CIGS films deposited at 350°C were also investigated in InBr 3 and CuBr with Se vapors at 450°C for one hour. Furthermore, these treatments resulted in increased grain size and less deviations from the as-deposited composition.

14 SOLAR ENERGY↗

A novel approach to partitioning evapotranspiration into evaporation and transpiration in flooded ecosystems

Reliable partitioning of micrometeorologically measured evapotranspiration (ET) into evaporation (E) and transpiration (T) would greatly enhance our understanding of the water cycle and its response to climate change related shifts in local-to-regional climate conditions and rising global levels of vapor pressure deficit (VPD). While some methods on ET partitioning have been developed, their underlying assumptions make them difficult to apply more generally, especially in sites with large contributions of E. Here, we report a novel ET partitioning method using artificial neural networks (ANNs) in combination with a range of environmental input variables to predict daytime E from nighttime ET measurements. The study uses eddy covariance data from four restored wetlands in the Sacramento-San Joaquin Delta, California, USA, as well as leaf-level T data for validation. The four wetlands vary in their vegetation make-up and structure, representing a range of ET conditions. The ANNs were built with increasing complexity by adding the input variable that resulted in the next highest average value of model testing R 2 across all sites. The order of variable inclusion (and importance) was: VPD > gap-filled sensible heat flux (H_gf) > air temperature (T air ) > friction velocity (u * ) > other variables. The model using VPD, H_gf, T air , and u * showed the best performance during validation with independent data and had a mean testing R 2 value of 0.853 (averaged across all sites, range from 0.728 to 0.910). In comparison to other methods, our ANN method generated T/ET partitioning results which were more consistent with CO 2 exchange data especially for more heterogeneous sites with large E contributions. Further, our method improves the understanding of T/ET partitioning. While it may be particularly suited to flooded ecosystems, it can also improve T/ET partitioning in other systems, increasing our knowledge of the global water cycle and ecosystem functioning.

59 BASIC BIOLOGICAL SCIENCES↗

Simulating evaporative wet and dry cycles in Gale crater, Mars using thermochemical modeling techniques

The aim of this work is to provide a model‐backed hypothesis for the formation of evaporites—sulfates, borates—in Gale crater using thermochemical modeling to determine constraints on their formation. We test the hypothesis that primary evaporites required multiple wet–dry cycles to form, akin to how evaporite assemblages form on Earth. Starting with a basalt‐equilibrated Mars fluid, Mars‐relevant concentrations of B and Li were added, and then equilibrated with Gale lacustrine bedrock. We simulated the cycles of evaporation followed by groundwater recharge/dilution to establish an approximate minimum number of wet–dry cycles required to form primary evaporites. We determine that a minimum of 250 wet–dry cycles may be required to start forming primary evaporites that consist of borates and Ca‐sulfates. We estimate that ~14,250 annual cycles (~25.6 k Earth years) of wet and dry periods may form primary borates and Ca‐sulfates in Gale crater. These primary evaporites could have been remobilized during secondary diagenesis to form the veins that the Curiosity rover observes in Gale crater. No Li salts form after 14,250 cycles modeled for the Gale‐relevant scenario (approximately 10 6 cycles would be needed) which implies Li may be leftover in a groundwater brine after the time of the lake. No major deposits of borates are observed to date in Gale crater which also implies that B may be leftover in the subsequent groundwater brine that formed after evaporites were remobilized into Ca‐sulfate veins.

58 GEOSCIENCES↗

Laser-Induced Phase Transitions in Vitreous Se Films Obtained by Vacuum-Thermal Evaporation

The results of the study of vitreous Se films obtained by a method of vacuum-thermal evaporation after their laser modification are presented. It is shown for the first time that a low-power laser irradiation of the film at a wavelength of 632.8 nm and room temperature results in a nucleation and growth of nanocrystallites of monoclinic and rhombohedral Se in an amorphous matrix of the film. The formation of the stable hexagonal Se phase is not observed. The appearance of nanocrystallites with an average size of ~20–30 nm is accompanied by a growth of a reflection coefficient of the film. The established new optical and structural properties of the formed films are stable in time at room temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Kerr black hole evaporation and Page curve

In this paper, we compute the black hole entropy and the entanglement entropy of Hawking radiations due to photons during the evaporation of a 4D asymptotically flat Kerr black hole. The Page curve for the Kerr black hole is obtained in the original way à la Page, and it qualitatively mimics the curve for the Schwarzschild black hole but has some new features.

Astronomy & Astrophysics↗

Droplet Growth or Evaporation Does Not Buffer the Variability in Supersaturation in Clean Clouds

Abstract Water vapor supersaturation in clouds is a random variable that drives activation and growth of cloud droplets. The Pi Convection–Cloud Chamber generates a turbulent cloud with a microphysical steady state that can be varied from clean to polluted by adjusting the aerosol injection rate. The supersaturation distribution and its moments, e.g., mean and variance, are investigated for varying cloud microphysical conditions. High-speed and collocated Eulerian measurements of temperature and water vapor concentration are combined to obtain the temporally resolved supersaturation distribution. This allows quantification of the contributions of variances and covariances between water vapor and temperature. Results are consistent with expectations for a convection chamber, with strong correlation between water vapor and temperature; departures from ideal behavior can be explained as resulting from dry regions on the warm boundary, analogous to entrainment. The saturation ratio distribution is measured under conditions that show monotonic increase of liquid water content and decrease of mean droplet diameter with increasing aerosol injection rate. The change in liquid water content is proportional to the change in water vapor concentration between no-cloud and cloudy conditions. Variability in the supersaturation remains even after cloud droplets are formed, and no significant buffering is observed. Results are interpreted in terms of a cloud microphysical Damköhler number (Da), under conditions corresponding to , i.e., the slow-microphysics regime. This implies that clouds with very clean regions, such that is satisfied, will experience supersaturation fluctuations without them being buffered by cloud droplet growth. Significance Statement The saturation ratio (humidity) in clouds controls the growth rate and formation of cloud droplets. When air in a turbulent cloud mixes, the humidity varies in space and time throughout the cloud. This is important because it means cloud droplets experience different growth histories, thereby resulting in broader size distributions. It is often assumed that growth and evaporation of cloud droplets buffers out some of the humidity variations. Measuring these variations has been difficult, especially in the field. The purpose of this study is to measure the saturation ratio distribution in clouds with a range of conditions. We measure the in-cloud saturation ratio using a convection cloud chamber with clean to polluted cloud properties. We found in clouds with low concentrations of droplets that the variations in the saturation ratio are not suppressed.

54 ENVIRONMENTAL SCIENCES↗

Mercury Dispersion Modeling 242-25H Evaporator Portable Backup Ventilation

The SRNL Atmospheric Technologies Group performed an analysis of mercury emissions from the H-Tank Farm 242-25H Evaporator backup ventilation system exhaust to assess worst case15-minute and 8-hour average concentrations and evaluate whether the ACIGH Short-Term Exposure Limit (STEL), or Threshold Limit Value (TLV) levels for mercury are exceeded following a seismic event. This analysis was also used to establish a minimum stack height at which ambient mercury concentration would not exceed the regulatory limits. The American Meteorological Society/Environmental Protection Agency Regulatory Model (AERMOD) was used as the dispersion modelling tool for this analysis. Results indicate that a stack height of 20 ft result in ground level concentrations that exceed the STEL or TLV standards at ground level only in the areas immediately around the stack, and generally on the slope of the hill beneath the 242-25H and 242-9H buildings.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Characterization Results For The July 2018 H-Tank Farm 2h Evaporator Overhead Samples

This report contains the radioanalytical results of the 2H evaporator overhead sample received at Savannah River National Laboratory (SRNL) on July 16, 2018. Specifically, concentrations of 137 Cs, 90 Sr, and 129 I are reported and compared to the corresponding Waste Acceptance Criteria (WAC) limits of the Effluent Treatment Project (ETP) Waste Water Collection Tank (WWCT) (rev. 6). The radionuclide concentrations in the sample were found to be in compliance with the ETP WAC limits.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Characterization Results for the July 2018 H-Tank Farm 2H Evaporator Overhead Samples

This report contains the radioanalytical results of the 2H evaporator overhead sample received at Savannah River National Laboratory (SRNL) on July 16, 2018. Specifically, concentrations of 137 Cs, 90 Sr, and 129 I are reported and compared to the corresponding Waste Acceptance Criteria (WAC) limits of the Effluent Treatment Project (ETP) Waste Water Collection Tank (WWCT) (rev. 6). The radionuclide concentrations in the sample were found to be in compliance with the ETP WAC limits.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Screening of Additional Candidate Low-Temperature Glasses for Technetium Recovered from Hanford Effluent Management Facility Evaporator Bottoms

In this annex to a previously reported study, a series of laboratory screening tests was conducted to identify low-temperature glasses that have significant potential for use in disposition of technetium from a Hanford Tank Waste Treatment & Immobilization Plant (WTP) secondary liquid waste stream. Specifically, a glass waste form is sought that would be suitable for on-site disposition of technetium, salts, and other species in a Tc-rich stream recovered by ion exchange from the future Effluent Management Facility (EMF) evaporator concentrate. In the current study, several additional candidate glasses were identified, and testing of previous candidates was extended to include the Toxicity Characteristic Leaching Procedure (TCLP). In non-radioactive testing with rhenium surrogate, new formulations incorporated a simulated ion exchange eluate at temperatures below 750 °C to produce an amorphous, or mixed crystalline-amorphous, product. Incorporation of technetium (NaTcO 4 )-containing simulated eluate was evaluated for two of these glasses. Technetium was not retained well in these glasses, confounding the previous conclusion that Tc volatilization during vitrification can be reduced by appropriate selection of low-temperature glasses. Preliminary data for additional low-temperature glass compositions and recommendations for future work are provided. This report is a deliverable associated with requisition 55068-004-03 NFE-17-0020 "Candidate Low-T Glass Waste Forms for EMF Bottoms On-Site Disposition Alternative."

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Leach Testing of Laboratory-Scale Melter Evaporator Condensate Cementitious Waste Forms

Cementitious waste forms immobilizing evaporated AP-105 off-gas condensate were used to determine radionuclide and contaminant leachability in deionized water over a 63-day period. The off-gas condensate was collected during the actual tank AP-105 low activity waste continuous laboratory-scale melter (LSM)) run performed in fiscal year 2018 and was then solidified as a cementitious waste form using the Cast Stone formulation (8 weight percent [wt%] ordinary Portland cement, 45 wt% class F fly ash, 47 wt% blast furnace slag). Here, using the U.S. Environmental Protection Agency Method 1315 leach testing procedure, the release rate of technetium 99 (Tc), iodine-129 (I), nitrate (NO 3 - ), and sodium (Na + ) from two Cast Stone specimens was measured. From these measurements, observed diffusivity values for each constituent were calculated and can be used in future iterations and maintenance of the Integrated Disposal Facility performance assessments. Furthermore, by testing Cast Stone specimens immobilizing off-gas produced while vitrifying actual tank waste, the results of this effort improve the technical defensibility of long-term waste form performance estimates for the Cast Stone formulation. Finally, 99 Tc distribution within a representative waste form at the end of the 63-day leach period as well as bulk mineralogy were determined using solid phase characterization methods.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Evaporation Sub-model Development for Volume of Fluid (eVOF) Method Applicable to Spray-Wall Interaction Including Film Characteristics with Validation at High Pressure and Temperature Conditions (Final Report)

Internal combustion engines have seen a great evolution over the last several decades through application of high pressure direct injection, multiple injections, and other technologies to reduced fuel consumption, NOx, and PM. Although combustion systems with advanced injection strategies have been studied extensively, there exists a significant fundamental knowledge gap on the fuel-spray interactions with the piston surface and chamber walls. Advanced computational codes validated with experimental techniques have to be developed for accurate representation of the drop impingement, fuel film formation, and vaporization. Current engine CFD spray models utilize a Lagrangian framework for modeling which lacks critical considerations of the physics pertaining to these interactions and thus requiring extensive parameterization, tuning and validation. The team from Michigan Technological University, University of Massachusetts Dartmouth, and Argonne National Laboratory is composed of experts in sprays, combustion, engines and CFD with a wide spectrum of knowledge including specific expertise in the area under consideration. In the proposed work, a VOF modeling approach has been adopted for the spray-wall interaction, film formation and spreading, and vaporization. With the inclusion of a vaporization submodel, a more predictive and accurate simulation of the spray-film was performed without extensive need of parameterization and tuning. Extensive experimentation of the spray-wall interaction under the range of conditions matching the thermodynamic and surface temperatures that occur in diesel and gasoline engines were conducted to validate the SWI submodels and for development of the evaporation sub-model, which has been implemented in the Converge software.

42 ENGINEERING↗

Evaporation Submodel Development for Volume of Fluid (eVOF) Method Applicable to Spray-Wall Interaction Including Film Characteristics with Validation at High Pressure and Temperature Conditions

Internal combustion engines have seen a great evolution over the last several decades through application of high pressure direct injection, multiple injections, and other technologies to reduced fuel consumption, NOx, and PM. Although combustion systems with advanced injection strategies have been studied extensively, there exists a significant fundamental knowledge gap on the fuel-spray interactions with the piston surface and chamber walls. Advanced computational codes validated with experimental techniques have to be developed for accurate representation of the drop impingement, fuel film formation, and vaporization. Current engine CFD (Computational Fluid Dynamics) spray models utilize a Lagrangian framework for modeling which lacks critical considerations of the physics pertaining to these interactions and thus requiring extensive parameterization, tuning and validation. The team from Michigan Technological University, University of Massachusetts Dartmouth, and Argonne National Laboratory is composed of experts in sprays, combustion, engines and CFD with a wide spectrum of knowledge including specific expertise in the area under consideration. In the proposed work, a VOF (Volume of Fluid) modeling approach has been adopted for the spray-wall interaction, film formation and spreading, and vaporization. With the inclusion of a vaporization submodel, a more predictive and accurate simulation of the spray-film was performed without extensive need of parameterization and tuning. Extensive experimentation of the spray-wall interaction under the range of conditions matching the thermodynamic and surface temperatures that occur in diesel and gasoline engines were conducted to validate the SWI submodels and for development of the evaporation submodel, which has been implemented in the flow solver.

42 ENGINEERING↗

Modeling the Destruction of Glycolate in the Defense Waste Processing Facility (DWPF) Recycle Stream and Concentration Factors for Glycolate in the 2H Evaporator

Two models were developed to predict maximum glycolate concentrations in the Savannah River Site (SRS) Concentration, Storage, and Transfer Facility (CSTF) from implementation of the Nitric-Glycolic flowsheet at the Defense Waste Processing Facility (DWPF). One model describes the kinetics of glycolate destruction via chemical oxidation with sodium permanganate. This model conservatively predicts glycolate concentration delivered to the CSTF with a high probability the actual glycolate concentration is lower than predicted. The second model describes the potential concentration of said residual glycolate within the 242-16H (i.e., “2H”) Evaporator system.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗