Search NASA⌕ Search

SEARCH · Search NASA

Results for “Energy - Biomass”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

Vibration-translation energy transfer in vibrationally excited diatomic molecules

A semiclassical collision model is applied to the study of energy transfer rates between a vibrationally excited diatomic molecule and a structureless atom. The molecule is modeled as an anharmonic oscillator with a multitude of dynamically coupled vibrational states. Three main aspects in the prediction of vibrational energy transfer rates are considered. The applicability of the semiclassical model to an anharmonic oscillator is first evaluated for collinear encounters. Second, the collinear semiclassical model is applied to obtain numerical predictions of the vibrational energy transfer rate dependence on the initial vibrational state quantum number. Thermally averaged vibration-translation rate coefficients are predicted and compared with CO-He experimental values for both ground and excited initial states. The numerical model is also used as a basis for evaluating several less complete but analytic models. Third, the role of rational motion in the dynamics of vibrational energy transfer is examined. A three-dimensional semiclassical collision model is constructed with coupled rotational motion included. Energy transfer within the molecule is shown to be dominated by vibration-rotation transitions with small changes in angular momentum. The rates of vibrational energy transfer in molecules with rational frequencies that are very small in comparison to their vibrational frequency are shown to be adequately treated by the preceding collinear models.

Mckenzie, R. L.↗

Enhancement of solar heavy nuclei at high energies in the 4 July 1974 event

Relative abundances of energetic nuclei in the 4 July 1974 solar event are presented. The results show a marked enhancement of abundances that systematically increase with nuclear charge numbers in the range of the observation, 6 less than or equal to Z less than or equal to 26 for energies above 15 MeV/nucleon. While such enhancements are commonly seen below 10 MeV/nucleon, most observations at higher energies are found to be consistent with solar system abundances. The energy spectrum of oxygen is observed to be significantly steeper than most other solar events studied in this energy region. It is proposed that these observations are characteristic of particle populations at energies approximately 1 MeV/nucleon, and that the anomalous features observed here may be the result of the high energy extension of such a population that is commonly masked by other processes or populations that might occur in larger solar events.

Bertsch, D. L.↗

Atomic electron energies including relativistic effects and quantum electrodynamic corrections

Atomic electron energies have been calculated relativistically. Hartree-Fock-Slater wave functions served as zeroth-order eigenfunctions to compute the expectation of the total Hamiltonian. A first order correction to the local approximation was thus included. Quantum-electrodynamic corrections were made. For all orbitals in all atoms with 2 less than or equal to Z less than or equal to 106, the following quantities are listed: total energies, electron kinetic energies, electron-nucleus potential energies, electron-electron potential energies consisting of electrostatic and Breit interaction (magnetic and retardation) terms, and vacuum polarization energies. These results will serve for detailed comparison of calculations based on other approaches. The magnitude of quantum electrodynamic corrections is exhibited quantitatively for each state.

Aoyagi, M.↗

Analog to digital converter for two-dimensional radiant energy array computers

The analog to digital converter stage derives a bit array of digital radiant energy signals representative of the amplitudes of an input radiant energy analog signal array and derives an output radiant energy analog signal array to serve as an input to succeeding stages. The converter stage includes a digital radiant energy array device which contains radiant energy array positions so that the analog array is less than a predetermined threshold level. A scaling device amplifies the radiant signal levels of the input array and the digital array so that the radiant energy signal level carried by the digital array corresponds to the threshold level. An adder device adds the signals of the scaled input and digital arrays at corresponding array positions to form the output analog array.

Shaefer, D. H.↗

Emerging Energy Alternatives for the Southeastern States

The proceedings of the first symposium on emerging energy alternatives for the Southeastern States are presented. Some topics discussed are: (1) solar energy, (2) wood energy, (3) novel energy sources, (4) agricultural and industrial process heat, (5) waste utilization, (6) energy conservation and (7) ocean thermal energy conversion.

Stefanakos, E. K.↗

Applications of thermal energy storage in the cement industry

In the manufacture of cement, literally trillions of Btu's are rejected to the environment each year. The purpose of this feasibility study program was to determine whether thermal energy storage could be used to conserve or allow alternative uses of this rejected energy. This study identifies and quantifies the sources of rejected energy in the cement manufacturing process, established use of this energy, investigates various storage system concepts, and selects energy conservation systems for further study. Thermal performance and economic analyses are performed on candidate storage systems for four typical cement plants representing various methods of manufacturing cement. Through the use of thermal energy storage in conjunction with waste heat electric power generation units, an estimated 2.4 x 10 to the 13th power Btu/year, or an equivalent on investment of the proposed systems are an incentive for further development.

Jaeger, F. A.↗

Enhancement of solar heavy nuclei at high energies in the 4 July 1974 event

Relative abundances of energetic nuclei in the July 4, 1974, solar event are presented. The results show a marked enhancement of abundances that systematically increase with nuclear charge numbers in the range of the observation (Z between 6 and 26) for energies above 15 MeV/nucl. While such enhancements are commonly seen below 10 MeV/nucl, most observations at higher energies are found to be consistent with solar-system abundances. The energy spectrum of oxygen is observed to be significantly steeper than most other solar events studied in this energy region. It is proposed that these observations are characteristic of particle populations at energies of the order of 1 MeV/nucl and that the anomalous features observed may be the result of the high-energy extension of such a population that is commonly masked by other processes or populations that might occur in larger solar events.

Bertsch, D. L.↗

Ultrahigh-energy neutrino astronomy

High-energy cosmic-ray interactions can produce neutrinos. The neutrino fluxes are calculated over a range of energies. The sources considered (and their ranges of importance) are cosmic-ray interactions in earth's atmosphere (neutrino energies less than 10,000 GeV), cosmic-ray interactions with ambient hydrogen in galaxies (neutrino energies between 10,000 and 1 million GeV), regions of cosmic-ray acceleration - e.g., pulsars - and cosmic-ray interactions with the microwave background radiation (neutrino energies greater than 100 million GeV). In addition, estimates of the flux from compact sources, such as active galaxies, are made. These flux levels, calculated conservatively, may be high enough for practical detection with a 1-cu km seawater detector; i.e., count rates greater than 1 per day. Such observations would provide information mainly about high-energy physics, but also (over long times) about cosmic-ray spectra, composition, and acceleration, as well as supernova and galactic-nucleus explosions.

Margolis, S. H.↗

The effects of divergent and nondivergent winds on the kinetic energy budget of a mid-latitude cyclone - A case study

The magnitude of the divergent component of the wind is relatively small compared to that of the nondivergent component in large-scale atmospheric flows; nevertheless, it plays an important role in the case of explosive cyclogenesis examined here. The kinetic energy budget for the life cycle of an intense, developing cyclone over North America is calculated. The principal kinetic energy source is the net horizontal transport across the boundaries of the region enclosing the cyclone. By investigating the relative importance of the divergent and nondivergent wind components in the kinetic energy budget, it was found, as expected, that neglecting the divergent wind component in calculating the magnitude of the kinetic energy is of little consequence, but that the horizontal flux convergence and generation of kinetic energy depend crucially upon the divergent component. Modification of the divergent wind component can result in significant changes in the kinetic energy budget of the synoptic system.

Chen, T.-C.↗

High energy X-ray and radio studies of Scorpius X-1

The results from extended high energy X-ray observations of Scorpius XR-1 from the OSO-8 satellite are reported here. The source was observed for a total of 15 days in 1975, 1977 and 1978. Simultaneous 10.7 GHz and 4.75 GHz radio data were obtained during the 1978 observation, and low energy X-ray data during the 1975 and 1978 observations. The data reveals a lack of any correlation between the high energy X-rays and the other energy ranges. A three standard deviation upper limit of 22% was obtained for any modulation of the high energy flux with the binary period. No high energy tail was observed at any time.

Coe, M. J.↗

Acoustic energy in ducts - Further observations

The transmission of acoustic energy in uniform ducts carrying uniform flow is investigated with the purpose of clarifying two points of interest. The two commonly used definitions of acoustic 'energy' flux are shown to be related by a Legendre transformation of the Lagrangian density exactly as in deriving the Hamiltonian density in mechanics. In the acoustic case the total energy density and the Hamiltonian density are not the same which accounts for two different 'energy' fluxes. When the duct has acoustically absorptive walls neither of the two flux expressions gives correct results. A reevaluation of the basis of derivation of the energy density and energy flux provides forms which yield consistent results for soft walled ducts.

Eversman, W.↗

Thermal Energy Storage: Fourth Annual Review Meeting

The development of low cost thermal energy storage technologies is discussed in terms of near term oil savings, solar energy applications, and dispersed energy systems for energy conservation policies. Program definition and assessment and research and technology development are considered along with industrial storage, solar thermal power storage, building heating and cooling, and seasonal thermal storage. A bibliography on seasonal thermal energy storage emphasizing aquifer thermal energy is included.

Source record↗

Solar applications analysis for energy storage

The role of energy storage as it relates to solar energy systems is considered. Storage technologies to support solar energy applications, the status of storage technologies, requirements and specifications for storage technologies, and the adequacy of the current storage research and development program to meet these requirements are among the factors discussed. Emphasis is placed on identification of where the greatest potential exists for energy storage in support of those solar energy systems which could have a significant impact on the U.S. energy mix.

Blanchard, T.↗

Cogeneration Technology Alternatives Study (CTAS). Volume 3: Energy conversion system characteristics

Six current and thirty-six advanced energy conversion systems were defined and combined with appropriate balance of plant equipment. Twenty-six industrial processes were selected from among the high energy consuming industries to serve as a frame work for the study. Each conversion system was analyzed as a cogenerator with each industrial plant. Fuel consumption, costs, and environmental intrusion were evaluated and compared to corresponding traditional values. The advanced energy conversion technologies indicated reduced fuel consumption, costs, and emissions. Fuel energy savings of 10 to 25 percent were predicted compared to traditional on site furnaces and utility electricity. With the variety of industrial requirements, each advanced technology had attractive applications. Fuel cells indicated the greatest fuel energy savings and emission reductions. Gas turbines and combined cycles indicated high overall annual savings. Steam turbines and gas turbines produced high estimated returns. In some applications, diesels were most efficient. The advanced technologies used coal derived fuels, or coal with advanced fluid bed combustion or on site gasifications. Data and information for both current and advanced energy conversion technology are presented. Schematic and physical descriptions, performance data, equipment cost estimates, and predicted emissions are included. Technical developments which are needed to achieve commercialization in the 1985-2000 period are identified.

Source record↗

Regional analysis of earthquake occurrence and seismic energy release

The historic temporal variation in earthquake occurrence and seismic energy release on a regional basis throughtout the world were studied. The regionalization scheme employed divided the world into large areas based either on seismic and tectonic considerations (Flinn-Engdahl Scheme) or geographic (longitude and latitude) criteria. The data set is the wide earthquake catalog of the National Geophysical Solar-Terrestrial Data Center. An apparent relationship exists between the maximum energy released in a limited time within a seismic region and the average or background energy per year averaged over a long time period. In terms of average or peak energy release, the most seismic regions of the world during the 50 to 81 year period ending in 1977 were Japanese, Andean South American, and the Alaska-Aleutian Arc regions. The year to year fluctuations in regional seismic energy release are greater, by orders of magnitude, than the corresponding variations in the world-wide seismic energy release. The b values of seismic regions range from 0.7 to 1.4 where earthquake magnitude is in the range 6.0 to 7.5.

Cohen, S. C.↗

High energy X-ray and radio studies of Scorpius X-1

The results from extended high energy X-ray observations of Scorpius X-1 from the OSO 8 satellite are reported. The source was observed for a total of 15 days in 1975, 1977, and 1978. Simultaneous 10.7 GHz and 4.75 GHz radio data were obtained during the 1978 observation, and low energy X-ray data during the 1975 and 1978 observations. Detailed studies of the data reveal a lack of any correlation between the high energy X-rays and the other energy ranges. A 3 sigma upper limit of 22% was obtained for any modulation of the high energy flux with the binary period. No high energy tail was observed at any time.

Coe, M. J.↗

Electron energy distributions measured during electron beam/plasma interactions

In the large vacuum facility at the NASA-Johnson Space Center an electron beam was projected 20 m parallel to B from a gun with variable accelerating potential (1.0 to 2.5 kV) to an aluminum target. The ionospheric neutral pressure and field were approximated. Beam electron energy distributions were measured directly using an electrostatic deflection analyzer and indirectly with a detector that responded to the X-rays produced by electron impact on the target. At low currents the distribution is sharply peaked at the acceleration potential. At high currents a beam plasma discharge occurs and electrons are redistributed in energy so that the former energy peak broadens to 10-15 percent FWHM with a strongly enhanced low energy tail. At the 10% of maximum point the energy spectrum ranges from less than 1/2 to 1.2 times the gun energy. The effect is qualitatively the same at all pitch angles and locations sampled.

Jost, R. J.↗

Study of thermal energy storage using fluidized bed heat exchangers

The technical and economic feasibility of fluid bed heat exchangers (FBHX) for thermal energy storage (TES) in waste heat recovery applications is assessed by analysis of two selected conceptual systems, the rotary cement kiln and the electric arc furnace. It is shown that the inclusion of TES in the energy recovery system requires that the difference in off-peak and on-peak energy rates be large enough so that the value of the recovered energy exceeds the value of the stored energy by a wide enough margin to offset parasitic power and thermal losses. Escalation of on-peak energy rates due to fuel shortages could make the FBHX/TES applications economically attractive in the future.

Weast, T. E.↗