Search NASA⌕ Search

SEARCH · Search NASA

Results for “Engineering - Particle accelerators”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
NASA NTRS2002

A Data-Driven Solution for Performance Improvement

Marketed as the "Software of the Future," Optimal Engineering Systems P.I. EXPERT(TM) technology offers statistical process control and optimization techniques that are critical to businesses looking to restructure or accelerate operations in order to gain a competitive edge. Kennedy Space Center granted Optimal Engineering Systems the funding and aid necessary to develop a prototype of the process monitoring and improvement software. Completion of this prototype demonstrated that it was possible to integrate traditional statistical quality assurance tools with robust optimization techniques in a user- friendly format that is visually compelling. Using an expert system knowledge base, the software allows the user to determine objectives, capture constraints and out-of-control processes, predict results, and compute optimal process settings.

Source record↗
DOE OSTI2025

Imaging Valence Electron Rearrangement in a Chemical Reaction Using Hard X-Ray Scattering

We have observed the signatures of valence electron rearrangement in photoexcited ammonia using ultrafast hard x-ray scattering. Time-resolved x-ray scattering is a powerful tool for imaging structural dynamics in molecules because of the strong scattering from the core electrons localized near each nucleus. Such core-electron contributions generally dominate the differential scattering signal, masking any signatures of rearrangement in the chemically important valence electrons. Ammonia represents an exception to the typically high core-to-valence electron ratio. Here, we measured 9.8 keV x-ray scattering from gas-phase deuterated ammonia following photoexcitation via a 200 nm pump pulse to the 3s Rydberg state. We observed changes in the recorded scattering patterns due to the initial photoexcitation and subsequent deuterium dissociation. Ab initio calculations confirm that the observed signal is sensitive to the rearrangement of the single photoexcited valence electron as well as the interplay between adiabatic and nonadiabatic dissociation channels. The use of ultrafast hard x-ray scattering to image the structural rearrangement of single valence electrons constitutes an important advance in tracking valence electronic structure in photoexcited atoms and molecules.

Gabalski, Ian [SLAC National Accelerator Laborator↗
DOE OSTI2020

Accelerating the solution of the S N equations with highly anisotropic scattering using the Fokker-Planck approximation

The discrete ordinates method can model forward-peaked transport problems accurately. However, convergence of discrete ordinates solution can become arbitrarily slow upon use of standard iterative procedures like source iteration. Standard zeroth and first moment-based acceleration methods like nonlinear diffusion acceleration and diffusion synthetic acceleration are ineffective in accelerating such problems because these methods do not correct higher order Legendre-moments of angular flux. In this paper, we explore the idea of using the Fokker-Planck approximation as a preconditioner to accelerate the convergence of solution of forward-peaked transport problems. Finally, we observe that such preconditioning can successfully reduce the iteration count by up to four orders of magnitude, and solver runtime by up to three orders of magnitude when compared to diffusion synthetic acceleration.

42 ENGINEERING↗
NASA NTRS1983

Demonstration and evaluation of gas turbine transit buses

The Gas Turbine Transit Bus Demonstration Program was designed to demonstrate and evaluate the operation of gas turbine engines in transit coaches in revenue service compared with diesel powered coaches. The main objective of the program was to accelerate development and commercialization of automotive gas turbines. The benefits from the installation of this engine in a transit coach were expected to be reduced weight, cleaner exhaust emissions, lower noise levels, reduced engine vibration and maintenance requirements, improved reliability and vehicle performance, greater engine braking capability, and superior cold weather starting. Four RTS-II advanced design transit coaches were converted to gas turbine power using engines and transmissions. Development, acceptance, performance and systems tests were performed on the coaches prior to the revenue service demonstration.

Source record↗
NASA NTRS1992

Atmospheric entry of nuclear-powered vehicles due to accidental/inadvertent termination of operations

The entries of the radioactive components into earth's atmosphere resulting from an accident or inadvertent abort of a space vehicle powered by nuclear-thermal-rockets are investigated. The study is made for a typical piloted Mars mission vehicle incapacitated by an accident or malfunction during the trans-Mars-injection maneuver due to simultaneous multiple failures of its component systems. The three different accident/abort modes considered are the following: (1) a constant-rate angular pitching motion of the vehicle, (2) a constant-acceleration angular pitching motion of the vehicle, and (3) the rocket engine breaks away from the rest of the vehicle with a finite relative (dispersion) velocity. The speeds and angles of the atmospheric entries are calculated for each mode for different values of the time of the accident, pitching rate, acceleration, and dispersion velocity. For the most severe entry speeds and flight-path angles, the stagnation-point pressures, heat transfer rates, thickness, and mass per unit area of the heat shields necessary to protect the radioactive components from disintegrating, deceleration g-loads, and high ground-impact velocities are calculated. The study points out that the high g-loads and high ground-impact velocities are the most serious problems that must be addressed.

Menees, Gene P.↗
DOE OSTI2022

Mechanisms Engineering Test Loop (METL) Experimenter's Guide

The Mechanisms Engineering Test Loop (METL) was built to streamline and accelerate the in-sodium testing of systems and components under conditions that simulate a sodium-cooled fast reactor pool environment. The METL team at Argonne National Laboratory (ANL) can assist experimenters in achieving their technical goals by providing liquid-metal expertise and access to infrastructure required for most alkali metal related research. This document offers a brief overview of METL and provides a basic design guide for researchers interested in conducting research at the facility. Additional information regarding the history and operations of METL can be found in §6.1. Furthermore, high resolution images found in this document as well as CAD files of aforementioned vessels can be provided upon request.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2024

Mechanisms Engineering Test Loop (METL) Experimenter's Guide - Revision 2

The Mechanisms Engineering Test Loop (METL) was built to streamline and accelerate the in-sodium testing of systems and components under conditions that simulate a sodium-cooled fast reactor pool environment. The METL team at Argonne National Laboratory (ANL) can assist experimenters in achieving their technical goals by providing liquid-metal expertise and access to infrastructure required for most alkali metal related research. This document offers a brief overview of METL and provides a basic design guide for researchers interested in conducting research at the facility. Additional information regarding the history and operations of METL can be found in §6.1. Furthermore, high resolution images found in this document as well as CAD files of aforementioned vessels can be provided upon request.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2021

Aero-Thermal Characterization of Accelerating and Diffusing Passages Downstream of Rotating Detonation Combustors

Cycle benefits of rotating detonation engines show up to five percentage points of efficiency gain for low-pressure ratio engines. An optimal integration between the combustor and the turbine needs to be guaranteed to realize this potential gain. The rotating detonation combustor (RDC) exhausts transonic flow with shocks rotating at frequencies ranging from a few to tens of kilohertz depending on the number of present waves. Hence, the turbine design requires precise knowledge of the fluctuations and losses downstream of the combustor. This paper focuses on the quantification of fluctuations and losses for accelerating and diffusing passages. The analysis of the combustor is performed via reactive unsteady Reynolds Averaged Navier-Stokes (URANS) simulations. The unsteady RANS equations are solved via CFD++ from Metacomp with a one-step reaction mechanism for an H2-air mixture. The resolving of the boundary layer is achieved with a structured mesh of around 36 million cells. Inlet pressure of 10 bar and two different back pressures are applied to the combustor to model the interconnection with downstream turbines. Finally, we present and assess a methodology to reduce the computational time to model these passages ten times.

Braun, James↗
DOE OSTI2026

ACDC (Automated Campbell Diagram Code) [SWR-26-042]

This application provides a web-based graphical user interface to generating Campbell Diagrams and visualizing mode shapes for OpenFAST turbine models. Determining the aeroelastic stability and dynamic characteristics of wind turbines is a critical step in turbine design and analysis. Historically, extracting natural frequencies and mode shapes from OpenFAST—the industry-standard whole-turbine simulation code—has been a fragmented and tedious process. It required manual model configuration, command-line linearization execution, and complex post-processing via proprietary scripts to handle rotating-frame dynamics. To address these workflow bottlenecks, we present the Automated Campbell Diagram Code (ACDC), an open-source graphical software tool developed by the National Laboratory of the Rockies (NLR) under the DOE-funded Distributed Wind Aeroelastic Modeling (dWAM) project. ACDC streamlines the end-to-end linearization and stability analysis workflow into a single, intuitive cross-platform application. The software guides users through OpenFAST model configuration, definition of operating points, and the automated execution of steady-state trim and linearization simulations. Under the hood, ACDC automates the complex mathematical post-processing steps required for rotating systems, including Multi-Blade Coordinate (MBC) transformations, eigenanalysis, and advanced modal tracking utilizing the Modal Assurance Criterion (MAC) and spectral clustering. Finally, ACDC processes these results to automatically generate Campbell diagrams and features a robust 3D visualization engine to animate full-system mode shapes. By eliminating the reliance on external post-processing environments and manual data manipulation, ACDC significantly accelerates dynamic analysis and lowers the barrier to entry for wind energy researchers and engineers.

Summerville, Brent [National Laboratory of the Roc↗
DOE OSTI2025

Laser, vacuum and gas reaction chamber for operando measurements at NSLS-II's 28-ID-2

We present a laser reaction chamber that we have developed for in situ/operando X-ray diffraction measurements at the NSLS-II 28-ID-2 X-ray powder diffraction beamline. This chamber allows for rapid and dynamic sample heating under specialized gas environments, spanning ambient conditions down to vacuum pressures. We demonstrate the capabilities of this setup through two applications: laser-driven heating in polycrystalline iron oxide and in single-crystal WTe 2 . Our measurements reveal the ability to resolve chemical reaction kinetics over minutes with 1 s time resolution. This setup advances opportunities for in situ/operando X-ray diffraction studies of both bulk and single-crystal materials.

36 MATERIALS SCIENCE↗
NASA NTRS2010

Vibration Response Predictions for Heavy Panel Mounted Components from Panel Acreage Environment Specifications

The development of new launch vehicles in the Aerospace industry often relies on response measurements taken from previously developed vehicles during various stages of liftoff and ascent, and from wind tunnel models. These measurements include sound pressure levels, dynamic pressures in turbulent boundary layers and accelerations. Rigorous statistical scaling methods are applied to the data to derive new environments and estimate the performance of new skin panel structures. Scaling methods have proven to be reliable, particularly for designs similar to the vehicles used as the basis for scaling, and especially in regions of smooth acreage without exterior protuberances or heavy components mounted to the panel. To account for response attenuation of a panel-mounted component due to its apparent mass at higher frequencies, the vibroacoustics engineer often reduces the acreage vibration according to a weight ratio first suggested by Barrett. The accuracy of the reduction is reduced with increased weight of the panel-mounted component, and does not account for low-frequency amplification of the component/panel response as a system. A method is proposed that combines acreage vibration from scaling methods with finite element analysis to account for the frequency-dependent dynamics of heavy panel-mounted components. Since the acreage and mass-loaded skins respond to the same dynamic input pressure, such pressure may be eliminated in favor of a frequency-dependent scaling function applied to the acreage vibration to predict the mass-loaded panel response. The scaling function replaces the Barrett weight ratio, and contains all of the dynamic character of the loaded and unloaded skin panels. The solution simplifies for spatially uncorrelated and fully correlated input pressures. Since the prediction uses finite element models of the loaded and unloaded skins, a rich suite of response data are available to the design engineer, including interface forces, stress and strain, as well as acceleration and displacement. An extension of the method is also developed to incorporate the effect of a local protuberance near a heavy component. Acreage environments from traditional scaling methods with and without protuberance effects serve as the basis for the extension. Authors:

Harrison, Phillip↗
DOE OSTI2021

Recent advancements in the genetic engineering of microalgae

The development of more sustainable food, feed, and bio-products is critical to mitigating the environmental stresses facing our world today. Algae, which includes seaweeds, eukaryotic microalgae, and cyanobacteria, are a promising platform to achieving this, as they have low energy and space requirements, are safe for human and animal consumption, and can be manipulated to produce a diversity of valuable bioproducts. This review focuses on microalgae, both eukaryotic and cyanobacteria. In the past, addressing the major challenges of bringing microalgal production systems to an economically viable scale only had a relatively small genetic toolset to work with, in comparison to other microbial systems such as bacteria and yeast. Expanding the molecular tools available for genetic engineering of microalgae will lead to higher product yields, and accelerate the development of new microalgal bioproducts for commercial applications, thereby supporting the shift towards more environmentally friendly products. In this review, we highlight significant advances from recent years on the design of microalgal expression vectors, discovery of genetic regulatory elements (promoters and transcription factors), optimization of transformation methods, and development of new strain improvement techniques, all aimed at advancing microalgae to become a more efficient biomanufacturing platform. We then discuss how these tools have been applied to improving recombinant protein production, and to enhance metabolic pathway engineering.

09 BIOMASS FUELS↗
DOE OSTI2021

Liquid Chromatography Coupled to Refractive Index or Mass Spectrometric Detection for Metabolite Profiling in Lysate-based Cell-free Systems

Engineering cellular metabolism for targeted biosynthesis can require extensive design-build-test-learn (DBTL) cycles as the engineer works around the cell's survival requirements. Alternatively, carrying out DBTL cycles in cell-free environments can accelerate this process and alleviate concerns with host compatibility. A promising approach to cell-free metabolic engineering (CFME) leverages metabolically active crude cell extracts as platforms for biomanufacturing and for rapidly discovering and prototyping modified proteins and pathways. Realizing these capabilities and optimizing CFME performance requires methods to characterize the metabolome of lysate-based cell-free platforms. That is, analytical tools are necessary for monitoring improvements in targeted metabolite conversions and in elucidating alterations to metabolite flux when manipulating lysate metabolism. In this work, metabolite analyses using high-performance liquid chromatography (HPLC) coupled with either optical or mass spectrometric detection were applied to characterize metabolite production and flux in E. coli S30 lysates. Specifically, this report describes the preparation of samples from CFME lysates for HPLC analyses using refractive index detection (RID) to quantify the generation of central metabolic intermediates and by-products in the conversion of low-cost substrates (i.e., glucose) to various high-value products. The analysis of metabolite conversion in CFME reactions fed with 13 C-labeled glucose through reversed-phase liquid chromatography coupled to tandem mass spectrometry (MS/MS), a powerful tool for characterizing specific metabolite yields and lysate metabolic flux from starting materials, is also presented. Altogether, applying these analytical methods to CFME lysate metabolism enables the advancement of these systems as alternative platforms for executing faster or novel metabolic engineering tasks.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2026

Molecular basis and biological relevance of bacterial and plant pinoresinol/lariciresinol reductase specificities

A bacterial pinoresinol/lariciresinol reductase (PLR) homolog named NrPinZ was obtained from a Novosphingobium rhizosphaerae sp. LY bacterial strain, with NrPinZ being part of its 5-step biochemical system catabolizing pinoresinol into coniferyl aldehyde and vanillin. Recombinant NrPinZ reduces racemic 8–8′ furanofuran lignans [(±)-pinoresinols, medioresinols, and syringaresinols] with similar overall catalytic efficiencies. In those reductions, only one of the two furan ring systems is reduced. Two other bacterial PLR homologs, NaPinZ and SlPinZ, from N. aromaticivorans F199 and Sphingobium lignivorans SYK-6, respectively, had comparable substrate versatilities and catalytic efficacies. Plant PLR homologs, by comparison, are either enantiospecific, enantioselective, or variants thereof, being able to reduce either one or both furan rings. For example, a recombinant enantioselective PLR (PLR_Tp2) from western red cedar (Thuja plicata) preferentially reduces both (+)-pinoresinol furan rings to afford (−)-secoisolariciresinol. BoltZ-2 modeling of NrPinZ and PLR_Tp2, together with substrate docking of (+)- and (−)-pinoresinols, medioresinols, and syringaresinols, was very instructive. The NrPinZ active site P1/P2 sub-pockets allow for both racemic forms to be catabolized. Conversely, the smaller P1 pocket in PLR_Tp2 preferentially positions (+)-pinoresinol for downstream metabolism into (−)-secoisolariciresinol, thereby providing a biochemical explanation for the different stereochemical outcomes. NrPinZ, NaPinZ, and SlPinZ, catalyzing substrate versatile catabolism of both racemic forms, may have important ramifications for gymnosperm and angiosperm lignin and lignan biodegradation, including its evolutionary significance and potential in enzyme engineering.

Boltz-2 molecular modeling↗
DOE OSTI2023

Newly identified sex chromosomes in the Sphagnum (peat moss) genome alter carbon sequestration and ecosystem dynamics

Peatlands are crucial sinks for atmospheric carbon but are critically threatened due to warming climates. Sphagnum (peat moss) species are keystone members of peatland communities where they actively engineer hyperacidic conditions, which improves their competitive advantage and accelerates ecosystem-level carbon sequestration. To dissect the molecular and physiological sources of this unique biology, we generated chromosome-scale genomes of two Sphagnum species: S. divinum and S. angustifolium. Sphagnum genomes show no gene colinearity with any other reference genome to date, demonstrating that Sphagnum represents an unsampled lineage of land plant evolution. The genomes also revealed an average recombination rate an order of magnitude higher than vascular land plants and short putative U/V sex chromosomes. These newly described sex chromosomes interact with autosomal loci that significantly impact growth across diverse pH conditions. This discovery demonstrates that the ability of Sphagnum to sequester carbon in acidic peat bogs is mediated by interactions between sex, autosomes and environment.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Counterpart identification and classification for eRASS1 and characterisation of the active galactic nuclei content

Context. Accurately accounting for the Active Galactic Nucleus (AGN) phase in galaxy evolution requires a large, clean AGN sample. This is now possible with SRG/eROSITA, which completed its first all-sky X-ray survey (eRASS1) on June 12, 2020. The public Data Release 1 (DR1, Jan 31, 2024) includes 930,203 sources from the western Galactic hemisphere. Aims. The data enable the selection of a large AGN sample and the discovery of rare sources. However, scientific return depends on accurate characterisation of the X-ray emitters, requiring high-quality multi-wavelength data. This paper presents the identification and classification of optical and infrared counterparts to eRASS1 sources. Methods. Counterparts to eRASS1 X-ray point sources were identified using Gaia DR3, CatWISE2020, and Legacy Survey DR10 (LS10) with the Bayesian NWAY algorithm and trained priors. Sources were classified as Galactic or extragalactic via a machine-learning model combining optical/IR and X-ray properties, trained on a reference sample. For extragalactic LS10 sources, photometric redshifts were computed using CIRCLEZ. Results. Within the LS10 footprint, all 656,614 eROSITA/DR1 sources have at least one possible optical counterpart; ∼570 000 are extragalactic and likely AGN. Half are new detections compared to AllWISE, Gaia, and Quaia AGN catalogues. Gaia and CatWISE2020 counterparts are less reliable, due to the survey’s shallowness and the limited amount of features available to assess the probability of being an X-ray emitter. In the Galactic plane, where the overdensity of stellar sources also increases the chance of associations, using conservative reliability cuts, we identified approximately 18 000 Gaia and 55 000 CatWISE2020 extragalactic sources. Conclusions. We have released three high-quality counterpart catalogues – plus the training and validation sets – as a benchmark for the field. These datasets have many applications, but in particular, they empower researchers to build AGN samples tailored for completeness and purity, accelerating the hunt for the Universe’s most energetic engines.

X-rays: general↗
DOE OSTI2021

Stepping on the Gas to a Circular Economy: Accelerating Development of Carbon-Negative Chemical Production from Gas Fermentation

Owing to rising levels of greenhouse gases in our atmosphere and oceans, climate change poses significant environmental, economic, and social challenges globally. Technologies that enable carbon capture and conversion of greenhouse gases into useful products will help mitigate climate change by enabling a new circular carbon economy. Gas fermentation using carbon-fixing microorganisms offers an economically viable and scalable solution with unique feedstock and product flexibility that has been commercialized recently. Here, we review the state of the art of gas fermentation and discuss opportunities to accelerate future development and rollout. We discuss the current commercial process for conversion of waste gases to ethanol, including the underlying biology, challenges in process scale-up, and progress on genetic tool development and metabolic engineering to expand the product spectrum. We emphasize key enabling technologies to accelerate strain development for acetogens and other nonmodel organisms.

59 BASIC BIOLOGICAL SCIENCES↗