Search NASA⌕ Search

SEARCH · Search NASA

Results for “Estimation method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

Baseline estimation with semidynamic and geometric satellite methods

The potential of a semidynamic method for an estimation of satellite position was investigated in a real data environment, using observations of Lageos collected during the MERIT campaign. In this method, quasi-simultaneous laser range observations of Lageos by pairs of stations were transformed to simultaneous range differences (SRDs), in order to reduce the effects of orbital and observational residual biases. Baselines obtained via the SRD method were compared to those obtained by the geometric method. It was found that, for baselines of regional extent, the SRD method is very efficient and at least as accurate as the more complex dynamic methods.

Dedes, George C.↗
NASA NTRS2000

Application of Statistical Methods of Rain Rate Estimation to Data From The TRMM Precipitation Radar

The TRMM Precipitation Radar is well suited to statistical methods in that the measurements over any given region are sparsely sampled in time. Moreover, the instantaneous rain rate estimates are often of limited accuracy at high rain rates because of attenuation effects and at light rain rates because of receiver sensitivity. For the estimation of the time-averaged rain characteristics over an area both errors are relevant. By enlarging the space-time region over which the data are collected, the sampling error can be reduced. However. the bias and distortion of the estimated rain distribution generally will remain if estimates at the high and low rain rates are not corrected. In this paper we use the TRMM PR data to investigate the behavior of 2 statistical methods the purpose of which is to estimate the rain rate over large space-time domains. Examination of large-scale rain characteristics provides a useful starting point. The high correlation between the mean and standard deviation of rain rate implies that the conditional distribution of this quantity can be approximated by a one-parameter distribution. This property is used to explore the behavior of the area-time-integral (ATI) methods where fractional area above a threshold is related to the mean rain rate. In the usual application of the ATI method a correlation is established between these quantities. However, if a particular form of the rain rate distribution is assumed and if the ratio of the mean to standard deviation is known, then not only the mean but the full distribution can be extracted from a measurement of fractional area above a threshold. The second method is an extension of this idea where the distribution is estimated from data over a range of rain rates chosen in an intermediate range where the effects of attenuation and poor sensitivity can be neglected. The advantage of estimating the distribution itself rather than the mean value is that it yields the fraction of rain contributed by the light and heavy rain rates. This is useful in estimating the fraction of rainfall contributed by the rain rates that go undetected by the radar. The results at high rain rates provide a cross-check on the usual attenuation correction methods that are applied at the highest resolution of the instrument.

Meneghini, R.↗
NASA NTRS2017

Ionospheric Slant Total Electron Content Analysis Using Global Positioning System Based Estimation

A method, system, apparatus, and computer program product provide the ability to analyze ionospheric slant total electron content (TEC) using global navigation satellite systems (GNSS)-based estimation. Slant TEC is estimated for a given set of raypath geometries by fitting historical GNSS data to a specified delay model. The accuracy of the specified delay model is estimated by computing delay estimate residuals and plotting a behavior of the delay estimate residuals. An ionospheric threat model is computed based on the specified delay model. Ionospheric grid delays (IGDs) and grid ionospheric vertical errors (GIVEs) are computed based on the ionospheric threat model.

Sparks, Lawrence C.↗
NASA NTRS2016

Motion Estimation System Utilizing Point Cloud Registration

A system and method of estimation motion of a machine is disclosed. The method may include determining a first point cloud and a second point cloud corresponding to an environment in a vicinity of the machine. The method may further include generating a first extended gaussian image (EGI) for the first point cloud and a second EGI for the second point cloud. The method may further include determining a first EGI segment based on the first EGI and a second EGI segment based on the second EGI. The method may further include determining a first two dimensional distribution for points in the first EGI segment and a second two dimensional distribution for points in the second EGI segment. The method may further include estimating motion of the machine based on the first and second two dimensional distributions.

Chen, Qi↗
NASA NTRS1976

Data acquisition and path selection decision making for an autonomous roving vehicle

Problems related to the guidance of an autonomous rover for unmanned planetary exploration were investigated. Topics included in these studies were: simulation on an interactive graphics computer system of the Rapid Estimation Technique for detection of discrete obstacles; incorporation of a simultaneous Bayesian estimate of states and inputs in the Rapid Estimation Scheme; development of methods for estimating actual laser rangefinder errors and their application to date provided by Jet Propulsion Laboratory; and modification of a path selection system simulation computer code for evaluation of a hazard detection system based on laser rangefinder data.

Frederick, D. K.↗
NASA NTRS1977

A hybrid technique for spacecraft attitude interpolation with arbitrary attitude data gaps

An algorithm for obtaining sufficiently accurate estimates of a system parameter Y, given a data record of the parameter in which at arbitrary times no direct observations of Y exist, and describing the variance of these estimates, is proposed. The method provides estimates at all requested times, and the variance of the estimates is maintained as close to the variance of directly measured data as the quality of input information will allow. Three classes of information are used: (1) the measured data record of Y and the statistical extension of this record into time intervals of no direct measurement, obtained by a modification of standard autocorrelation techniques; (2) an a priori indicator of the behavior of Y; and (3) one or more indirect indicators of Y based on observation of other system parameters. The application of the algorithm to the SEASAT-A attitude determination under conditions of sensor field-of-view limitations and sun occultations is presented.

Treder, A. J.↗
NASA NTRS1972

The methods of paired comparisons and magnitude estimation in judging the noisiness of aircraft

The point of subjective equality in regard to perceived noisiness for each of 14 pairs of aircraft noises was obtained using both magnitude estimation technique and the method of paired comparisons. Both methods gave approximately the same estimates of the points of subjective equality for the noise pairs, and both showed similar correspondence to predictive physical measures. Nevertheless, the two methods appear to have greater face validity to the listeners. However, the magnitude estimation technique appears to be more efficient; for a given level of reliability it requires approximately 50% of the testing time required by the paired comparison method. The functions relating physical intensity to the estimated magnitude of subjective noisiness had slopes ranging from about .61 to .29 for the aircraft noises employed in this study, indicating a required change of about 5 to 10 db for a doubling in subjective magnitude. Some physical units of noise measurement were found to be very predictive (standard errors of estimate as low as 1.9 db) of the subjective judgements of noisiness.

Clarke, F. R.↗
NASA NTRS2021

Locating the Isolator Shock-Train Leading Edge with Limited Pressure Information

Real-time detection and control of the isolator shock-train leading edge (STLE) is important to the performance of high-speed air-breathing engines, such as dual-mode scramjets. Typically, the STLE location is determined using wall static-pressure measurements, but there are often restrictions on the placement and overall number of the pressure transducers, reducing the viability and accuracy of such approaches. To address these issues, we introduce the adaptive pressure profile (APP) method for estimating the STLE location. This method does not require extensive prior characterization of the isolator or engine model. Instead, it uses real-time pressure measurements from a small number of transducers to adaptively learn the isolator pressure profile and subsequently uses this deduced profile to estimate the STLE location in a data-driven manner. The APP method works well in situations with sparse transducer placement. It produces accurate estimates when the STLE location is 1) not bounded by two or more transducers or 2) between two transducers that are several isolator duct heights apart. We demonstrate the efficacy of the APP method using simulations and experimental data from direct-connect isolator models. This validation shows that the APP method is accurate and robust for different flow regimes, transducer configurations, and model geometries.

Gregory J. Hunt↗
NASA NTRS1985

Completely monotone regression estimates of software failure rates

A method for estimating the present failure rate of a program is presented. A crude nonparameter estimate of the failure rate function is obtained from past failure times. This estimate is then smoothed by fitting a completely monotonic function, which is the solution of a quadratic programming problem. The value of the smoothed function at present time is used as the estimate of present failure rate. Results of a Monte Carlo study of performance are given.

Miller, D. R.↗
NASA NTRS1988

Estimating Electron Content Of The Ionosphere

Method for estimation total electron content of ionosphere. Based on measurements of signals transmitted from global positioning satellites (GPS's). Ionospheric delays obtained by measuring differential arrival times of signals at two different frequencies. Since GPS observations cover certain regions of sky, location of space probe to be calibrated might not overlap GPS field of view. Certain assumptions made about behavior of ionosphere so total electron content estimated in any direction from receiver.

Lanyi, G. E.↗
NASA NTRS1991

Estimating Atmospheric Turbulence From Flight Records

Method for estimation of atmospheric turbulence encountered by airplanes utilizes wealth of data captured by multichannel digital flight-data recorders and air-traffic-control radar. Developed as part of continuing effort to understand how airplanes respond to such potentially hazardous phenomena as: clear-air turbulence generated by destabilized wind-shear layers above mountains and thunderstorms, and microbursts (intense downdrafts striking ground), associated with thunderstorms. Reconstructed wind fields used to predict and avoid future hazards.

Wingrove, R. C.↗
NASA NTRS1974

A reevaluation of the interrupter technique for airway resistance measurement

An attempt was made to obtain a better insight into the actual transient response of airway opening pressure (Pao) following rapid occlusion. With this knowledge it was hoped to be able to clarify the reason for the overestimations found by other investigators, and possibly to obtain a more accurate method of estimating alveolar pressure just prior to interruption. This would result in an improved method for estimating airway resistance. Use of an extrapolation method was found to provide an improved correlation between resistances determined by the interruptor technique and those found by the plethysmograph in normal subjects.

Jackson, A. C.↗
NASA NTRS1981

Incorporating spatial context into statistical classification of multidimensional image data

Compound decision theory is employed to develop a general statistical model for classifying image data using spatial context. The classification algorithm developed from this model exploits the tendency of certain ground-cover classes to occur more frequently in some spatial contexts than in others. A key input to this contextural classifier is a quantitative characterization of this tendency: the context function. Several methods for estimating the context function are explored, and two complementary methods are recommended. The contextural classifier is shown to produce substantial improvements in classification accuracy compared to the accuracy produced by a non-contextural uniform-priors maximum likelihood classifier when these methods of estimating the context function are used. An approximate algorithm, which cuts computational requirements by over one-half, is presented. The search for an optimal implementation is furthered by an exploration of the relative merits of using spectral classes or information classes for classification and/or context function estimation.

Bauer, M. E.↗
NASA NTRS2017

Implementation of a Battery Health Monitor and Vertical Lift Aircraft Testbed for the Application of an Electrochemisty-Based State of Charge Estimator

Prediction methods concerning remaining charge in lithium-ion batteries that power unmanned aerial vehicles are of critical concern for the safe fulfillment of mission objectives. In recent years, lithium-ion batteries have been the power source for both fixed wing and vertical lift electric vehicles. The purpose of this document is to describe in detail the implementation of a battery health monitor for estimating the state of charge of a lithium-ion battery and a lithium-ion polymer battery that is used to power a vertical lift aircraft test-bed. It will be demonstrated that an electro-chemistry based state of charge estimator effectively tracks battery discharge characteristics and may be employed as a useful tool in monitoring battery health.

Potteiger, Timothy R.↗
NASA NTRS1991

Quasi-static shape estimation and control of adaptive truss structures

Methods for estimating the deformation of adaptive truss structures are proposed which employ internal displacement sensors to measure changes in the length of selected truss members. Based on the measured data from the instrumented truss member, the total truss deformation pattern can be estimated through direct interpolation. To verify the validity of the methods presented here, numerical simulations are carried out for simple plane trusses, a beam truss, and a tetrahedral truss.

Kuwao, Fumihiro↗
NASA NTRS1991

On the estimation of jet-induced fountain lift and additional suckdown in hover for two-jet configurations

Currently available methods for estimating the net suckdown induced on jet V/STOL aircraft hovering in ground effect are based on a correlation of available force data and are, therefore, limited to configurations similar to those in the data base. Experience with some of these configurations has shown that both the fountain lift and additional suckdown are overestimated but these effects cancel each other for configurations within the data base. For other configurations, these effects may not cancel and the net suckdown could be grossly overestimated or underestimated. Also, present methods do not include the prediction of the pitching moments associated with the suckdown induced in ground effect. An attempt to develop a more logically based method for estimating the fountain lift and suckdown based on the jet-induced pressures is initiated. The analysis is based primarily on the data from a related family of three two-jet configurations (all using the same jet spacing) and limited data from two other two-jet configurations. The current status of the method, which includes expressions for estimating the maximum pressure induced in the fountain regions, and the sizes of the fountain and suckdown regions is presented. Correlating factors are developed to be used with these areas and pressures to estimate the fountain lift, the suckdown, and the related pitching moment increments.

Kuhn, Richard E.↗
NASA NTRS1993

Fractal dimension analyses of lava surfaces and flow boundaries

An improved method of estimating fractal surface dimensions has been developed. The accuracy of this method is illustrated using artificially generated fractal surfaces. A slightly different from usual concept of linear dimension is developed, allowing a direct link between that and the corresponding surface dimension estimate. These methods are applied to a series of images of lava flows, representing a variety of physical and chemical conditions. These include lavas from California, Idaho, and Hawaii, as well as some extraterrestrial flows. The fractal surface dimension estimations are presented, as well as the fractal line dimensions where appropriate.

Cleghorn, Timothy F.↗