Results for “FLUID MECHANICS” — Page 30

NASA NTRS1984

Technical publications of the NASA Wallops Flight Facility, 1980 through 1983

This bibliography lists the publications sponsored by the NASA Wallops Flight Center/NASA Goddard Space Flight Center, Wallops Flight Facility during the period 1980 through 1983. The compilation contains citations listed by type of publication; i.e., NASA formal report, NASA contractor report, journal article, or presentation; by contract/grant number; and by accession number. Oceanography, astrophysics, artificial satellites, fluid mechanics, and sea ice are among the topics covered.

Foster, J. N.↗

NASA NTRS1982

The CMC/3DPNS computer program for prediction of three-dimension, subsonic, turbulent aerodynamic juncture region flow. Volume 2: Users' manual

The CMC fluid mechanics program system was developed to transmit the theoretical solution of finite element numerical solution methodology, applied to nonlinear field problems into a versatile computer code for comprehensive flow field analysis. Data procedures for the CMC 3 dimensional Parabolic Navier-Stokes (PNS) algorithm are presented. General data procedures a juncture corner flow standard test case data deck is described. A listing of the data deck and an explanation of grid generation methodology are presented. Tabulations of all commands and variables available to the user are described. These are in alphabetical order with cross reference numbers which refer to storage addresses.

Manhardt, P. D.↗

NASA NTRS1984

Hybrid approach to steady transonic normal-shock compressible laminar boundary-layer interactions over airfoils

A simulation of steady transonic viscous-inviscid interactions through a combination of zonal solution methods (involving different equation sets and numerical regions for various flow regions) is used in an investigation of a fluid mechanics problem in which the pressure distribution is determined by the interaction between transonic inviscid flow and an inner laminar viscous layer. The results obtained are in good agreement with laminar experimental data. Both attached and separated boundary layer flows are considered for either weak or strong interactions.

Ram, R. B.↗

NASA NTRS1984

The National Transonic Facility - A research perspective

The capabilities of the National Transonic Facility (NTF) at NASA-Langley and its impact on aerodynamics investigations are surveyed. The fan-driven, closed-circuit transonic wind tunnel has an 8.2 sq ft slotted test section. Trials can be run from Mach 0.2-1.2, pressures of 1-8.9 atm, and temperatures of -320 to 150 F using nitrogen as the working gas. Instrumentation has been developed for monitoring force, pressure, attitude, deformation, temperature, skin friction, flow transition, and flow velocity as well as visualizing flows around the models. Pressures of 15-130 psi are available, as are Re up to 120 million at Mach 1. Correlations are being made with flight data from the Shuttle, 767, X-29A, and TACT aircraft for real-world extrapolations. The NTF, when combined with computational fluid dynamics techniques, will permit testing of aerodynamically sophisticated shapes while narrowing the design goals for each model during basic research in fluid mechanics, transport, and aerodynamic phenomena.

Campbell, J. F.↗

NASA NTRS1984

Fluids Experiment Apparatus (FEA)

The Fluids Experiment Apparatus FEA is a modular zero gravity chemistry/physics laboratory to support fundamental space processing research. It can be used to conduct basic and applied process or product experiments in general liquid chemistry, crystal growth, fluid mechanics, thermodynamics, and cell culturing. The various FEA subsystems are readily configured to perform a wide range of investigations.

Martin, M.↗

NASA NTRS1982

The CMC/3DPNS computer program for prediction of three-dimensional, subsonic, turbulent aerodynamic juncture region flow. Volume 3: Programmers' manual

The CMC fluid mechanics program system was developed to transmit the theoretical evolution of finite element numerical solution methodology, applied to nonlinear field problems into a versatile computer code for comprehensive flow field analysis. A detailed view of the code from the standpoint of a computer programmer's use is presented. A system macroflow chart and detailed flow charts of several routines necessary to interact with a theoretican/user to modify the operation of this program are presented. All subroutines and details of usage, primarily for input and output routines are described. Integer and real scalars and a cross reference list denoting subroutine usage for these scalars are outlined. Entry points in dynamic storage vector IZ; the lengths of each vector accompanying the scalar definitions are described. A listing of the routines peculiar to the standard test case and a listing of the input deck and printout for this case are included.

Orzechowski, J. A.↗

NASA NTRS1984

A scanning laser velocimeter for turbulence research

Turbulent and unsteady separated flows occur on most practical flight vehicles, but are not yet sufficiently understood for designs to provide safe margins of performance without recourse to extensive experiment and computation. In date, reliable experimental data for even basic flows is severely limited and does not yet provide a satisfactory data base with which to assess current design and calculation methods. Although the laser velocimeter (LV) has become a proven, nonintrusive instrument for the measurement of local mean velocities and turbulence properties, measurements have been of a mean, statistical nature derived from averages accumulated independently at different positions in the flow. Thus, the measurements do not give an instantaneous dynamic, picture of the flow-field structures. Accordingly, a new technique for rapid LV scans of turbulent flow fields was proposed. The potential of this new instrument for fundamental fluid mechanical measurements of turbulent flows has been demonstrated. The results clearly show that significant unsteady flow features are hidden by conventional measurements and that the scanning laser velocimeter should prove an invauable tool in future studies of the structure of turbulent flows.

Duen, F. K.↗

NASA NTRS1985

Advanced research and technology programs for advanced high-pressure oxygen-hydrogen rocket propulsion

A research and technology program for advanced high pressure, oxygen-hydrogen rocket propulsion technology is presently being pursued by the National Aeronautics and Space Administration (NASA) to establish the basic discipline technologies, develop the analytical tools, and establish the data base necessary for an orderly evolution of the staged combustion reusable rocket engine. The need for the program is based on the premise that the USA will depend on the Shuttle and its derivative versions as its principal Earth-to-orbit transportation system for the next 20 to 30 yr. The program is focused in three principal areas of enhancement: (1) life extension, (2) performance, and (3) operations and diagnosis. Within the technological disciplines the efforts include: rotordynamics, structural dynamics, fluid and gas dynamics, materials fatigue/fracture/life, turbomachinery fluid mechanics, ignition/combustion processes, manufacturing/producibility/nondestructive evaluation methods and materials development/evaluation. An overview of the Advanced High Pressure Oxygen-Hydrogen Rocket Propulsion Technology Program Structure and Working Groups objectives are presented with highlights of several significant achievements.

Marsik, S. J.↗

NASA NTRS1985

Nested subcritical flows within supercritical systems

In supercritical systems the design inlet and outlet pressures are maintained above the thermaodynamic critical pressure P sub C. Designers rely on this simple rule of thumb to circumvent problems associated with a subcritical pressure regime nested within the supercritical pressure system along with the uncertainties in heat transfer, fluid mechanics, and thermophysical property variations. The simple rule of thumb is adequate in many low-power designs but is inadequate for high-performance turbomachines and linear systems, where nested two-phase regions can exist. Examples for a free-jet expansion with backpressure greater than P sub C and a rotor (bearing) with ambient pressure greater than P sub C illustrate the existence of subcritical pressure regimes nested within supercritical systems.

Hendricks, R. C.↗

NASA NTRS1985

Investigation of foam flotation and phase partitioning techniques

The present status of foam flotation as a separation process is evaluated and limitations for cells and proteins are determined. Possible applications of foam flotation to separations in microgravity are discussed. Application of the fluid mechanical aspects of foam separation techniques is made to phase partitioning in order to investigate the viscous drag forces that may effect the partitioning of cells in a two phase poly(ethylene glycol) and dextran system.

Currin, B. L.↗

NASA NTRS1985

Future fundamental combustion research for aeropropulsion systems

Physical fluid mechanics, heat transfer, and chemical kinetic processes which occur in the combustion chamber of aeropropulsion systems were investigated. With the component requirements becoming more severe for future engines, the current design methodology needs the new tools to obtain the optimum configuration in a reasonable design and development cycle. Research efforts in the last few years were encouraging but to achieve these benefits research is required into the fundamental aerothermodynamic processes of combustion. It is recommended that research continues in the areas of flame stabilization, combustor aerodynamics, heat transfer, multiphase flow and atomization, turbulent reacting flows, and chemical kinetics. Associated with each of these engineering sciences is the need for research into computational methods to accurately describe and predict these complex physical processes. Research needs in each of these areas are highlighted.

Mularz, E. J.↗

NASA NTRS1985

Higher order methods for convection-diffusion problems

This paper applies C1 cubic Hermite polynomials embedded in an orthogonal collocation scheme to the spatial discretization of the unsteady nonlinear Burgers equation as a model of the equations of fluid mechanics. The temporal discretization is carried out by means of either a noniterative finite difference or an iterative finite difference procedure. Results of this method are compared with those of a second-order finite difference scheme and a splined-cubic Taylor's series scheme. Stability limits are derived and the matrix structure of the several schemes are compared.

Murphy, J. D.↗

NASA NTRS1984

A new interpretation of internal heat transfer coefficients of porous media

The results of laser anemometer and flow visualization based fluid mechanics studies of porous media are used to obtain heat transfer coefficients for porous materials. Average pore flow Re ranging from 0.16-700 were examined. Darcy, inertial steady laminar, unsteady laminar and turbulent flow regimes were detected. A passage length model was devised to derive the heat transfer coefficient. Sample data from flows through porous metals composed of powders and fibers validated the passage length for Darcy and inertial flow regimes. Unsteady laminar and turbulent flow coefficients require the identification of new parameters.

Dybbs, A.↗

NASA NTRS1985

Future fundamental combustion research for aeropropulsion systems

Physical fluid mechanics, heat transfer, and chemical kinetic processes which occur in the combustion chamber of aeropropulsion systems were investigated. With the component requirements becoming more severe for future engines, the current design methodology needs the new tools to obtain the optimum configuration in a reasonable design and development cycle. Research efforts in the last few years were encouraging but to achieve these benefits research is required into the fundamental aerothermodynamic processes of combustion. It is recommended that research continues in the areas of flame stabilization, combustor aerodynamics, heat transfer, multiphase flow and atomization, turbulent reacting flows, and chemical kinetics. Associated with each of these engineering sciences is the need for research into computational methods to accurately describe and predict these complex physical processes. Research needs in each of these areas are highlighted.

Mularz, E. J.↗

NASA NTRS1985

Stability, accuracy, and efficiency of some underintegrated methods in finite element computations

In an attempt to increase computational efficiency in the numerical solution of highly nonlinear problems in solid and fluid mechanics, underintegrated finite element methods have been employed by many analysts. Underintegration refers to the use of a rule of an order lower than that required to integrate polynomial integrands exactly. The main drawback of this technique is related to the production of rank-deficient stiffness matrices, or equivalently an expanded kernel of the governing linear momentum operators. Such a development can introduce numerical instabilities. In order to overcome this difficulty, artificial stiffness or viscosity methods, or other stabilization methods have been proposed. One approach involves the elimination of spurious modes in a postprocessing operation. The present study is concerned with this a posteriori elimination method, taking into account the results which can be expected from it, and some of its possible extensions.

Jacquotte, O.-P.↗

NASA NTRS1985

Fluid Flow in Crystal Growth: Analysis of the Verticle Bridgman and Floating Zone Process

Research is aimed at the fundamental understanding of the interactions of heat and mass transport and fluid mechanics in crystal growth from the melt, especially in how it pertains to experiments supported by the Microgravity Science and Applications program. Emphasis has been on studies of the vertical Bridgman system, on small-scale floating zone systems proposed for space flight, and on quantitative prediction of nonlinear transitions in melt/solid interface morphologies leading to the formation of dendrites in directional solidification. The analysis of vertical Bridgman growth has lead to the complete numerical analysis of transport phenomena in directional solidification and to a detailed comparison of calculations to the GaGe growth experiments of Wang and Witt. Calculations show the central role of the ampoule material in determining the radial temperature gradients in the melt and thus, the intensity of convection. Results indicate that diffusion-controlled growth can not be achieved on Earth with conventional growth systems, but are feasible in microgravity

Brown, R. A.↗

NASA NTRS1985

Advanced research and technology program for advanced high pressure oxygen-hydrogen rocket propulsion

A research and technology program for advanced high pressure, oxygen-hydrogen rocket propulsion technology is presently being pursued by the National Aeronautics and Space Administration (NASA) to establish the basic discipline technologies, develop the analytical tools, and establish the data base necessary for an orderly evolution of the staged combustion reusable rocket engine. The need for the program is based on the premise that the USA will depend on the Shuttle and its derivative versions as its principal Earth-to-orbit transportation system for the next 20 to 30 yr. The program is focused in three principal areas of enhancement: (1) life extension, (2) performance, and (3) operations and diagnosis. Within the technological disciplines the efforts include: rotordynamics, structural dynamics, fluid and gas dynamics, materials fatigue/fracture/life, turbomachinery fluid mechanics, ignition/combustion processes, manufacturing/producibility/nondestructive evaluation methods and materials development/evaluation. An overview of the Advanced High Pressure Oxygen-Hydrogen Rocket Propulsion Technology Program Structure and Working Groups objectives are presented with highlights of several significant achievements.

Marsik, S. J.↗

NASA NTRS1986

Two-phase flows and heat transfer within systems with ambient pressure above the thermodynamic critical pressure

In systems where the design inlet and outlet pressures P sub amb are maintained above the thermodynamic critical pressure P sub c, it is often assumed that heat and mass transfer are governed by single-phase relations and that two-phase flows cannot occur. This simple rule of thumb is adequate in many low-power designs but is inadequate for high-performance turbomachines, boilers, and other systems where two-phase regions can exist even though P sub amb P sub c. Heat and mass transfer and rotordynamic-fluid-mechanic restoring forces depend on momentum differences, and those for a two-phase zone can differ significantly from those for a single-phase zone. By using a laminar, variable-property bearing code and a rotating boiler code, pressure and temperature surfaces were determined that illustrate nesting of a two-phase region within a supercritical pressure region. The method of corresponding states is applied to bearings with reasonable rapport.

Hendricks, R. C.↗