Search NASA⌕ Search

SEARCH · Search NASA

Results for “Fermi level”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

Effective g-factors of carriers in inverted InAs/GaSb bilayers

We perform tilt-field transport experiment on inverted InAs/GaSb, which hosts quantum spin Hall insulator. By means of coincidence method, Landau level (LL) spectra of electron and hole carriers are systematically studied at different carrier densities tuned by gate voltages. When Fermi level stays in the conduction band, we observe LL crossing and anti-crossing behaviors at odd and even filling factors, respectively, with a corresponding g-factor of 11.5. It remains nearly constant for varying filling factors and electron densities. On the contrary, for GaSb holes, only a small Zeeman splitting is observed even at large tilt angles, indicating a g-factor of less than 3.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Sulfur dimers adsorbed on Au(111) as building blocks for sulfur octomers formation: A density functional study

Experimental scanning tunneling microscopy (STM) studies have shown for more than two decades rectangular formations when sulfur atoms are deposited on Au(111) surfaces. The precursors have ranged from simple molecules or ions, such as SO{sub 2} gas or sulfide anions, to more complex organosulfur compounds. We investigated, within the framework of the Density Functional Theory, the structure of these rectangular patterns assuming them entirely composed of sulfur atoms as the experimental evidence suggests. The sulfur coverage at which the simulations were carried out (0.67 ML or higher) provoked that the sulfur-sulfur association had to be taken into account for achieving a good agreement between the sets of simulated and experimental STM images. A combination of four sulfur dimers per rectangular formation properly explained the trends obtained by the experimental STM analysis which were related with the rectangles' size and shape fluctuations together with sulfur-sulfur distances within these rectangles. Finally, a projected density of states analysis showed that the dimers were capable of altering the Au(5d) electronic states at the same level as atomic sulfur adsorbed at low coverage. Besides, sulfur dimers states were perfectly distinguished, whose presence near and above the Fermi level can explain both: sulfur-sulfur bond elongation and dimers stability when they stayed adsorbed on the surface at high coverage.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Use of Stevens coefficients for the prediction of magnetic transitions in pseudobinary R1-xRx'Al2 alloys: Application to Tm1-xTbxAl2

Recent heat-capacity and low-field magnetic susceptibility measurements revealed unusual magnetic phenomena occurring in Er{sub 1-x}R{sub x}Al{sub 2} systems (where R = Dy,Tb) in the vicinity of a 'magic' concentration of x = 0.25. Empirically, such behavior was attributed to different shapes of the 4f charge densities of the R{sup 3+} ions, which are represented by the opposite signs of the second-order Stevens factors. Here we show that by using both the signs and magnitudes of the second-order Stevens factors, magnetic transitions can be predicted in a broader range of pseudobinary R{sub 1-x}R'{sub x}Al{sub 2} alloys, where R and R' are rare-earth metals that have opposite signs of second-order Stevens factors. The predictions have been verified using the Tm{sub 1-x}Tb{sub x}Al{sub 2} system as a model using x-ray diffraction, magnetic susceptibility, and heat-capacity measurements. First-principles calculations have also been performed to explore the behavior of the density of states near the Fermi level.

36 MATERIALS SCIENCE↗

X-ray Spectroscopic Study of the Electronic Structure of CuCrO2

The electronic structure of the p-type transparent conducting oxide CuCrO{sub 2} has been studied by x-ray photoemission, x-ray absorption, and x-ray emission spectroscopies. The upper part of the valence band derives mainly from Cu?3d and Cr?3d states while the lower valence-band states are of dominant O?2p atomic character, but with pronounced mutual hybridization among Cu?3d, Cr?3d, and O?2p states. Site specific electronic excitations have been studied by resonant inelastic x-ray scattering at the Cu?L and Cr?L edges. Inelastic loss at the Cu?L edge is dominated by on-site interband excitations similar to those found in Cu{sub 2}O, while at the Cr?L edge localized excitations arising from ligand field splitting of the Cr?3d levels are observed. Mg doping on the Cr sites in CuCrO{sub 2} is shown to lead to a pronounced shift in the Fermi level toward the edge of the valence band. The experimental data are compared to electronic structure calculations on CuCrO{sub 2} carried out using density-functional methods corrected for onsite Coulomb repulsion.

36 MATERIALS SCIENCE↗

Electronic structure and photoluminescence properties of Eu{sup 2+}-activated Ca{sub 2}BN{sub 2}F

The electronic structure of undoped and luminescence properties of Eu{sup 2+}-doped Ca{sub 2}BN{sub 2}F have been investigated. First-principles calculations for Ca{sub 2}BN{sub 2}F show that the valence band is mainly composed of F and N 2p, B 2s and 2p orbitals, while the Ca 4s and 3d are almost empty, indicating that Ca{sub 2}BN{sub 2}F is a very ionic compound. The valence band close to the Fermi level is dominated by the N 2p states, and the bottom of the conduction band is determined by the Ca 3d and N/B 3s orbitals. The direct energy gap is calculated to be about 3.1 eV, in fair agreement with the experimental data of {approx}3.6 eV derived from the diffuse reflection spectrum. Due to the high degree of ionic bonding of the coordinations of Eu with (N, F) on the Ca sites, Ca{sub 2}BN{sub 2}F:Eu{sup 2+} shows strong blue emission with a maximum at about 420 nm upon UV excitation in the absorption range of 330-400 nm. - Graphical abstract: Diffuse reflection spectrum, excitation and emission spectra of Ca{sub 2}BN{sub 2}F:Eu{sup 2+}, showing that only the ionic Eu{sup 2+} center offers deep blue emission at about 422 nm under excitation at 339 nm.

36 MATERIALS SCIENCE↗

Doping Evolution of the Electronic Structure in the Single-Layer Cuprate Bi(2)Sr(2-X)La(X)CuO(6+Delta)

We have performed angle-resolved photoemission and core-level x-ray photoemission studies of the single-layer cuprate Bi{sub 2}Sr{sub 2-x}La{sub x}CuO{sub 6+{delta}} (Bi2201) and revealed the doping evolution of the electronic structure from the lightly doped to optimally doped regions. We have observed the formation of the dispersive quasiparticle band, evolution of the Fermi 'arc' into the Fermi surface, and the shift of the chemical potential with hole doping as in other cuprates. The doping evolution in Bi2201 is similar to that in Ca{sub 2-x}Na{sub x}CuO{sub 2}Cl{sub 2} (Na-CCOC), where a rapid chemical potential shift toward the lower Hubbard band of the parent insulator has been observed, but is quite different from that in La{sub 2-x}Sr{sub x}CuO{sub 4} (LSCO), where the chemical potential does not shift, yet the dispersive band and the Fermi arc and/or surface are formed around the Fermi level already in the lightly doped region. The (underlying) Fermi surface shape and band dispersions are quantitatively analyzed using tight-binding fit, and the deduced next-nearest-neighbor hopping integral t{prime} also confirms the similarity to Na-CCOC and the difference from LSCO.

36 MATERIALS SCIENCE↗

Change in the electronic properties of an InAs (111)A surface at oxygen and fluorine adsorption

Based on ab initio calculations, the adsorption of oxygen and fluorine on reconstructed (2 Multiplication-Sign 2) and unreconstructed (1 Multiplication-Sign 1) InAs (111)A surfaces is studied. The most stable adsorption positions are determined. It is shown that adsorption of oxygen on both surfaces gives rise to electronic states in the band gap. The preferential positions for oxygen adsorption on an InAs (111)A (2 Multiplication-Sign 2) surface are those where oxygen is bonded both to indium atoms and to arsenic atoms in the surface layer and also the vacant site between three indium atoms (the 'In-hollow position). Adsorption of fluorine brings about a pushing of the surface states out of the band gap; the position above indium atoms (the 'In-top position) is preferential for adsorbed fluorine. Adsorption of fluorine on an InAs (111)A (1 Multiplication-Sign 1) surface leads to the elimination of the surface state formed by indium p orbitals and to an unpinning of the Fermi level.

36 MATERIALS SCIENCE↗

Impurity levels in Hg{sub 3}In{sub 2}Te{sub 6} crystals

The parameters of impurity levels in Hg{sub 3}In{sub 2}Te{sub 6} samples are studied using the temperature dependences of the electron concentration n(T) and the Fermi-level energy E{sub F}(T). The dependences n(T) and E{sub F}(T) are obtained from data on the Hall coefficient R(T) and the thermopower α(T). Differential analysis of the dependences n(T) shows that, under variations in the degree of compensation by heat treatment of the samples, a wider spectrum of impurity levels in the band gap of Hg{sub 3}In{sub 2}Te{sub 6} can be analyzed.

36 MATERIALS SCIENCE↗

Seebeck Enhancement Through Miniband Conduction in III-V Semiconductor Superlattices at Low Temperatures

We present theoretically that the cross-plane Seebeck coefficient of InGaAs/InGaAlAs III-V semiconductor superlattices can be significantly enhanced through miniband transport at low temperatures. The miniband dispersion curves are calculated by self-consistently solving the Schrodinger equation with the periodic potential, and the Poisson equation taking into account the charge transfer between the two layers. Boltzmann transport in the relaxation-time approximation is used to calculate the thermoelectric transport properties in the cross-plane direction based on the modified density of states and group velocity. It is found that the cross-plane Seebeck coefficient can be enhanced more than 60% over the bulk values at an equivalent doping level at 80 K when the Fermi level is aligned at an edge of the minibands. Other thermoelectric transport properties are also calculated and discussed to further enhance the thermoelectric power factor.

Bahk, JH↗

Chromium as resonant donor impurity in PbTe

Here we synthesize and perform structural, thermoelectric, magnetic, and 125 Te NMR characterization measurements on chromium-doped PbTe. 125 Te NMR and magnetic measurements show that Pb 1-x Cr x Te is a solid solution up to x = 0.4 at.% and forms an n-type dilute paramagnetic semiconductor. The Cr level is resonant and pins the Fermi level about 100 meV into the conduction band at liquid nitrogen temperatures and below, but it moves into the gap as the temperature increases to 300 K. 125 Te NMR spectra exhibit a Knight shift that correlates well with Hall effect measurements and resolve peaks of Te near Cr. Magnetic behavior indicates that Cr exists mainly as Cr 2+ . No departure from the Pisarenko relation for PbTe is observed. Secondary Cr 2 Te 3 and Cr 3+δ Te 4 phases are present in samples with x > 0.4%.

36 MATERIALS SCIENCE↗

Space-charge-limited currents in an Se{sub 95}As{sub 5} chalcogenide glass-like semiconductor system containing EuF{sub 3} impurities

It is established that charge carrier (hole) transport in the Al-Se{sub 95}As{sub 5} Left-Pointing-Angle-Bracket EuF{sub 3} Right-Pointing-Angle-Bracket -Te structure is effected by unipolar injection currents limited by space charges with the involvement of two capture trap groups. Shallow traps corresponding to charged intrinsic defects C{sub 1}{sup -} are related to broken selenium bonds. Deep traps corresponding to charged intrinsic defects P{sub 2}{sup -} are formed by arsenic atoms with broken coordination. It is shown that the EuF{sub 3} impurity strongly affects the concentration of the capture traps, especially those localized near the Fermi level.

36 MATERIALS SCIENCE↗

Resistivity and thickness effects in dendritic web silicon solar cells

The decrease of minority carrier lifetime as resistivity decreases in dendritic-web silicon solar cells is addressed. This variation is shown to be consistent with the presence of defect levels in the bandgap which arise from extended defects in the web material. The extended defects are oxide precipitates (SiOx) and the dislocation cores they decorate. Sensitivity to this background distribution of defect levels increases with doping because the Fermi level moves closer to the majority carrier band edge. For high-resistivity dendritic-web silicon, which has a low concentration of these extended defects, cell efficiencies as high as 16.6 percent (4 sq cm, 40 ohm-cm boron-doped base, AM1.5 global, 100 mW/sq cm, 25 C JPL LAPSS1 measurement) and a corresponding electron lifetime of 38 microsec have been obtained. Thickness effects occur in bifacial cell designs and in designs which use light trapping. In some cases, the dislocation/precipitate defect can be passivated through the full thickness of web cells by hydrogen ion implantation.

Meier, D. L.↗

Doping evolution of the electronic structure in the single-layer cuprates Bi2Sr2&#8722xLaxCuO6 delta: Comparison with other single-layer cuprates

We have performed angle-resolved photoemission and core-level x-ray photoemission studies of the single-layer cuprate Bi{sub 2}Sr{sub 2-x}La{sub x}CuO{sub 6+{delta}} (Bi2201) and revealed the doping evolution of the electronic structure from the lightly-doped to optimally-doped regions. We have observed the formation of the dispersive quasi-particle band, evolution of the Fermi 'arc' into the Fermi surface and the shift of the chemical potential with hole doping as in other cuprates. The doping evolution in Bi2201 is similar to that in Ca{sub 2-x}Na{sub x}CuO{sub 2}Cl{sub 2} (Na-CCOC), where a rapid chemical potential shift toward the lower Hubbard band of the parent insulator has been observed, but is quite different from that in La{sub 2-x}Sr{sub x}CuO{sub 4} (LSCO), where the chemical potential does not shift, yet the dispersive band and the Fermi arc/surface are formed around the Fermi level already in the lightly-doped region. The (underlying) Fermi surface shape and band dispersions are quantitatively analyzed using tightbinding fit, and the deduced next-nearest-neighbor hopping integral t also confirm the similarity to Na-CCOC and the difference from LSCO.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

PbSnTe:In compound: Electron capture levels, galvanomagnetic properties, and THz sensitivity

A model of the Pb{sub 1–x}Sn{sub x}Te:In compound, based on concepts of the theory of disordered systems is considered. The temperature dependences of the Fermi-level position and carrier concentration are calculated depending on the indium doping level and are compared with experimental data. The transient current–voltage characteristics are calculated in the mode of injection from the contact and current limitation by space charge at various voltage-variation rates. The data obtained are compared with the experiments. It is demonstrated that the shape of the characteristics is controlled by the parameters of electron capture at localized states. Photocurrent relaxation in a magnetic field is studied, and the mechanism of such relaxation is discussed under the assumption of the magnetic freezing of carriers.

36 MATERIALS SCIENCE↗

Characteristics of surface states at the insulator-semiconductor interface in the thin-film electroluminescent structures based on ZnS:Mn

Distributions of the density of occupied surface electron states at the cathode interface between the insulator and phosphor in thin-film electroluminescent emitters are simulated in relation to the energy on the basis of experimental data. The dependences of the above distributions on the conditions of excitation of emitters are obtained. It is shown that these distributions shift to deeper levels of surface states as the frequency of excitation voltage is decreased and the pause between two neighboring switched-on states of emitters is increased, which corresponds to the cascade mechanism of relaxation of electrons captured by surface states. The coefficient of cascade capture of electrons prior to relaxation ((4-5) x 10{sup -12} cm{sup 2}/s), instantaneous lifetime of electrons prior to relaxation (0.2-0.25 s), cross section for capture of electrons to deeper levels of surface states (in excess or on the order of (6.7-8.3) x 10{sup -21} cm{sup 2}), largest values of the densities of occupied surface states at the cathode boundary from which electron tunnel ({approx}2.5 x 10{sup 13} cm{sup -2}), and energy density of above-specified surface states (7 x 1014 cm{sup -2} eV{sup -1}) have been determined. The values of the quasi-equilibrium Fermi level at the surface in the course of the activity of electroluminescent emitters varies in the range from 0.9 to 1.35 eV, depending on conditions of excitation.

36 MATERIALS SCIENCE↗

A First-Principle Calculation and de Haas-van Alphen Effect Simulation in Superconductor LaNiC{sub 2}

In this article the electronic structure and de Haas-van Alphen effect of LaNiC{sub 2} have been calculated by using the first-principle calculations. The antisymmetric spin-orbit coupling effect causes splitting estimated to be 62.9 and 27.5 meV in the two bands crossing the Fermi level. Regular translations between spin-up and spin-down states have been observed and calculated in discrete ranges of energy. Spin-orbit coupled Fermi surfaces are derived and the related de Hass-van Alphen effects have been simulated from the ELK-flapw calculations. The unusual disconnections in low-frequency area have been discussed in details. The Fermi surface topology of spin-up (l + 1/2) is very different from that of spin-down (l − 1/2) which is also evident by the proportions of electron-like bands. Finally the relationship between simulation results and Fermi surface details has been discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electronic structure of two-dimensional hexagonal diselenides: Charge density waves and pseudogap behavior

We theoretically study the electronic structure (spectral functions and Fermi surfaces) of incommensurate pseudogap and charge density wave (CDW) and commensurate CDW phases of quasi-two-dimensional diselenides 2H-TaSe{sub 2} and 2H-NbSe{sub 2}. The incommensurate pseudogap regime is described within the scenario based on short-range-order CDW fluctuations, considered within the static Gaussian random field model. In contrast, e.g., to high-T{sub c} cuprates, layered dichalcogenides have several different CDW scattering vectors and an electronic spectrum with two bands at the Fermi level. For this, we present a theoretical background for the description of multiple scattering processes within a multiple-band electronic spectrum. Theoretical spectral functions and Fermi surfaces thus obtained are compared with recent ARPES experimental data, demonstrating rather good qualitative agreement.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Self-Consistent Simulation of GaAs/InGaAs/AlGaAs Heterostructures Photoluminescence Spectra and Its Application to pHEMT Structures Diagnostics

We performed numerical self-consistent solution of Schrödinger and Poisson equations for GaAs/InGaAs/AlGaAs pHEMT structures with quantum well. Based on the results we calculated optical transition matrix elements and photoluminescence spectra of such structures with the same design and different parameters (such as doping level and epitaxial layers width). In the photoluminescence spectra calculations three fitting parameters have been used. These parameters are GaAs/InGaAs valence band offset in strained quantum well, hole quasi Fermi level and inhomogeneous broadening. The PL peaks amplitudes and positions dependencies on the structure parameters were established. These dependencies can be used as the basis for pHEMT structure non-destructive diagnostics.

36 MATERIALS SCIENCE↗