Search NASA⌕ Search

SEARCH · Search NASA

Results for “Field Operators”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Investigating the effects of electron bounce-cyclotron resonance on plasma dynamics in capacitive discharges operated in the presence of a weak transverse magnetic field

Recently, Patil et al. [Phys. Rev. Res. 4, 013059 (2022)] have reported the existence of an enhanced operating regime when a low-pressure (5 mTorr) capacitively coupled discharge (CCP) is driven by a very high radio frequency (60 MHz) source in the presence of a weak external magnetic field applied parallel to its electrodes. Their particle-in-cell simulations show that a significantly higher bulk plasma density and ion flux can be achieved at the electrode when the electron cyclotron frequency equals half of the applied radio frequency for a given fixed voltage. In the present work, we take a detailed look at this phenomenon and further delineate the effect of this “electron bounce-cyclotron resonance (EBCR)” on the electron and ion dynamics of the system. We find that the ionization collision rate and stochastic heating are maximum under resonance condition. The electron energy distribution function also indicates that the population of tail-end electrons is highest for the case where EBCR is maximum. Formation of electric field transients in the bulk plasma region is also seen at lower values of applied magnetic field. Finally, we demonstrate that the EBCR-induced effect is a low-pressure phenomenon and weakens as the neutral gas pressure increases. The potential utility of this effect to advance the operational performance of CCP devices for industrial purposes is discussed in this report.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

First implementation of gyrokinetic exact linearized Landau collision operator and comparison with models

Gyrokinetic simulations are fundamental to understanding and predicting turbulent transport in magnetically confined fusion plasmas. Previous simulations have used model collision operators with approximate field-particle terms of unknown accuracy and/or have neglected collisional finite Larmor radius (FLR) effects. We have implemented the linearized Fokker–Planck collision operator with exact field-particle terms and full FLR effects in a gyrokinetic code (GENE). The new operator, referred to as “exact” in this paper, allows the accuracy of model collision operators to be assessed. The conservative Landau form is implemented because its symmetry underlies the conservation laws and the H-theorem, and enables numerical methods to preserve this conservation, independent of resolution. The implementation utilizes the finite-volume method recently employed to discretize the Sugama collision model in GENE, allowing direct comparison between the two operators. Results show that the Sugama model appears accurate for the growth rates of trapped electron modes (TEMs) driven only by density gradients, but appreciably underestimates the growth rates as the collisionality and electron temperature gradient increase. The TEM turbulent fluxes near the nonlinear threshold using the exact operator are similar to the Sugama model for the n e = d ln T e /d ln n e = 0 case, but substantially larger than the Sugama model for the n e = 1 case. The FLR effects reduce the growth rates increasingly with wavenumber deepening a “valley” at the intermediate binormal wavenumber as the unstable mode extends from the TEM regime to the electron temperature gradient instability regime. Application to the Hinton–Rosenbluth problem shows that zonal flows decay faster as the radial wavenumber increases and the exact operator yields weaker decay rates.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2018

Functional determinants of radial operators in AdS 2

We study the zeta-function regularization of functional determinants of Laplace and Dirac-type operators in two-dimensional Euclidean AdS 2 space. More specifically, we consider the ratio of determinants between an operator in the presence of background fields with circular symmetry and the free operator in which the background fields are absent. By Fourier-transforming the angular dependence, one obtains an infinite number of one-dimensional radial operators, the determinants of which are easy to compute. The summation over modes is then treated with care so as to guarantee that the result coincides with the two-dimensional zeta-function formalism. The method relies on some well-known techniques to compute functional determinants using contour integrals and the construction of the Jost function from scattering theory. Here, our work generalizes some known results in flat space. The extension to conformal AdS 2 geometries is also considered. We provide two examples, one bosonic and one fermionic, borrowed from the spectrum of fluctuations of the holographic 1/4-BPS latitude Wilson loop.

Wilson↗
DOE OSTI2022

High gradient off-axis coupled C-band Cu and CuAg accelerating structures

Here, we report the high gradient testing results of two single-cell off-axis coupled standing wave accelerating structures. Two brazed standing wave off-axis coupled structures with the same geometry were tested: one made of pure copper (Cu) and one made of a copper–silver (CuAg) alloy with a silver concentration of 0.08%. A peak surface electric field of 450 MV/m was achieved in the CuAg structure for a klystron input power of 14.5 MW and a 1 μs pulse length, which was 25% higher than the peak surface electric field achieved in the Cu structure. The superb high gradient performance was achieved because of the two major optimizations in the cavity's geometry: (1) the shunt impedance of the cavity was maximized for a peak surface electric field to accelerating gradient ratio of ~2 for a fully relativistic particle, and (2) the peak magnetic field enhancement due to the input coupler was minimized to limit pulse heating. These tests allow us to conclude that C-band accelerating structures can operate at peak fields similar to those at higher frequencies while providing a larger beam iris for improved beam transport.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

EFT asymptotics: the growth of operator degeneracy

We establish formulae for the asymptotic growth (with respect to the scaling dimension) of the number of operators in effective field theory, or equivalently the number of S-matrix elements, in arbitrary spacetime dimensions and with generic field content. This we achieve by generalising a theorem due to Meinardus and applying it to Hilbert series---partition functions for the degeneracy of (subsets of) operators. Although our formulae are asymptotic, numerical experiments reveal remarkable agreement with exact results at very low orders in the EFT expansion, including for complicated phenomenological theories such as the standard model EFT. Our methods also reveal phase transition-like behaviour in Hilbert series. We discuss prospects for tightening the bounds and providing rigorous errors to the growth of operator degeneracy, and of extending the analytic study and utility of Hilbert series to EFT.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2017

Self-Shielding Of Transmission Lines

The use of shielding to contend with noise or harmful EMI/EMR energy is not a new concept. An inevitable trade that must be made for shielding is physical space and weight. Space was often not as much of a painful design trade in older larger systems as they are in today’s smaller systems. Today we are packing in an exponentially growing number of functionality within the same or smaller volumes. As systems become smaller and space within systems become more restricted, the implementation of shielding becomes more problematic. Often, space that was used to design a more mechanically robust component must be used for shielding. As the system gets smaller and space is at more of a premium, the trades starts to result in defects, designs with inadequate margin in other performance areas, and designs that are sensitive to manufacturing variability. With these challenges in mind, it would be ideal to maximize attenuation of harmful fields as they inevitably couple onto transmission lines without the use of traditional shielding. Dr. Tom Van Doren proposed a design concept for transmission lines to a class of engineers while visiting New Mexico. This design concept works by maximizing Electric field (E) and Magnetic Field (H) field containment between operating transmission lines to achieve what he called “Self-Shielding”. By making the geometric centroid of the outgoing current coincident with the return current, maximum field containment is achieved. The reciprocal should be true as well, resulting in greater attenuation of incident fields. Figure’s 1(a)-1(b) are examples of designs where the current centroids are coincident. Coax cables are good examples of transmission lines with co-located centroids but they demonstrate excellent field attenuation for other reasons and can’t be used to test this design concept. Figure 1(b) is a flex circuit design that demonstrate the implementation of self-shielding vs a standard conductor layout.

42 ENGINEERING↗
DOE OSTI2017

Spectral X-ray Radiography for Safeguards at Nuclear Fuel Fabrication Facilities: A Feasibility Study

The methods currently used by the International Atomic Energy Agency to account for nuclear materials at fuel fabrication facilities are time consuming and require in-field chemistry and operation by experts. Spectral X-ray radiography, along with advanced inverse algorithms, is an alternative inspection that could be completed noninvasively, without any in-field chemistry, with inspections of tens of seconds. The proposed inspection system and algorithms are presented here. The inverse algorithm uses total variation regularization and adaptive regularization parameter selection with the unbiased predictive risk estimator. Performance of the system is quantified with simulated X-ray inspection data and sensitivity of the output is tested against various inspection system instabilities. Material quantification from a fully-characterized inspection system is shown to be very accurate, with biases on nuclear material estimations of < 0.02%. It is shown that the results are sensitive to variations in the fuel powder sample density and detector pixel gain, which increase biases to 1%. Options to mitigate these inaccuracies are discussed.

Gilbert, Andrew J.↗
DOE OSTI2017

System Modeling and Simulation of In-Stream Hydrokinetic Turbines for Power Management and Control

Electricity generation from moving currents without using dams (i.e., in-stream hydrokinetic electricity) has the potential to introduce multiple GW of renewable power to U.S. grids. Here this study evaluates a control system designed to regulate the generator rotor rate (rpm) to improve power production from in-stream hydrokinetic turbines. The control algorithm is evaluated using numerical models of both a rigidly mounted tidal turbine (TT) and a moored ocean current turbine (OCT) coupled to an induction electric machine model. The moored simulation utilizes an innovative approach for coupling a multiple degrees-of-freedom (DOF) nonlinear hydrodynamic/mechanical turbine model with a nonlinear electromechanical generator model. Based on the turbine torque-speed characteristic, as well as the asynchronous machine features, a proportional–integral (PI) controller is used to generate a correction term for the frequency of the three-phase sinusoidal voltages that are supplied to the asynchronous generator. The speed control of the induction generator through the supply frequency is accomplished by a simplified voltage source inverter (VSI). The simplified VSI consists of control voltage sources (CVSs), while the comparison with a real VSI using diodes and transistors, which are controlled by pulse width modulation (PWM) technique, is also presented. Simulations are used to evaluate the developed algorithms showing that rpm fluctuations are around 0.02 for a tidal turbine operating in a wave field with a 6 m significant wave height and around 0.005 for a moored ocean current turbine operating in a wave field with a 2 m significant wave height.

16 TIDAL AND WAVE POWER↗
DOE OSTI2014

Nonlinear photoresponse of field effect transistors terahertz detectors at high irradiation intensities

Terahertz power dependence of the photoresponse of field effect transistors, operating at frequencies from 0.1 to 3 THz for incident radiation power density up to 100 kW/cm{sup 2} was studied for Si metal–oxide–semiconductor field-effect transistors and InGaAs high electron mobility transistors. The photoresponse increased linearly with increasing radiation intensity up to the kW/cm{sup 2} range. Nonlinearity followed by saturation of the photoresponse was observed for all investigated field effect transistors for intensities above several kW/cm{sup 2}. The observed photoresponse nonlinearity is explained by nonlinearity and saturation of the transistor channel current. A theoretical model of terahertz field effect transistor photoresponse at high intensity was developed. The model explains quantitative experimental data both in linear and nonlinear regions. Our results show that dynamic range of field effect transistors is very high and can extend over more than six orders of magnitudes of power densities (from ∼0.5 mW/cm{sup 2} to ∼5 kW/cm{sup 2})

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2017

ARM Radiosondes for National Polar-Orbiting Operational Environmental Satellite System Preparatory Project Validation Field Campaign Report

This IOP has been a coordinated effort involving the U.S. Department of Energy (DOE) Atmospheric Radiation (ARM) Climate Research Facility, the University of Wisconsin (UW)-Madison, and the JPSS project to validate SNPP NOAA Unique Combined Atmospheric Processing System (NUCAPS) temperature and moisture sounding products from the Cross-track Infrared Sounder (CrIS) and the Advanced Technology Microwave Sounder (ATMS). In this arrangement, funding for radiosondes was provided by the JPSS project to ARM. These radiosondes were launched coincident with the SNPP satellite overpasses (OP) at four of the ARM field sites beginning in July 2012 and running through September 2017. Combined with other ARM data, an assessment of the radiosonde data quality was performed and post-processing corrections applied producing an ARM site Best Estimate (BE) product. The SNPP targeted radiosondes were integrated into the NOAA Products Validation System (NPROVS+) system, which collocated the radiosondes with satellite products (NOAA, National Aeronautics and Space Administration [NASA], European Organisation for the Exploitation of Meteorological Satellites [EUMETSAT], Geostationary Operational Environmental Satellite [GOES], Constellation Observing System for Meteorology, Ionosphere, and Climate [COSMIC]) and Numerical Weather Prediction (NWP forecasts for use in product assessment and algorithm development. This work was a fundamental, integral, and cost-effective part of the SNPP validation effort and provided critical accuracy assessments of the SNPP temperature and water vapor soundings.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Interpretable Deep Learning for Advancing Field-Enhanced Catalysis

This DOE Early Career project developed a physics-informed, interpretable AI-and-modeling framework to understand and exploit electric-field effects in heterogeneous catalysis, with ammonia cracking and synthesis as a representative pathway. The team built and validated methods to map local electric fields on metal surfaces and nanoparticles, showing that low-coordination features (tips/edges/corners) can concentrate fields by several-fold relative to flat facets. Using DFT-generated datasets, the project created physics-guided machine learning models that rapidly predict local electric fields and field-dependent adsorption energetics with near-DFT accuracy while reducing computational cost by orders of magnitude. These predictions were integrated with microkinetic modeling to quantify how field-dipole interactions reshape reaction energetics and mechanisms, enabling large increases in predicted catalytic rates and substantial reductions in operating temperature under favorable field conditions. To accelerate discovery of earth-abundant catalysts, the project combined interpretable ML screening (with electronic-structure descriptors identified as key drivers) with a generative inverse-design workflow based on diffusion models and physics constraints. The resulting closed-loop approach, linking simulation, mechanistic modeling, and AI, provides reusable tools and datasets for designing catalysts and operating conditions in field-enhanced catalysis, with broad relevance to electrostatic catalysis, plasma catalysis, electrocatalysis, and other energy-related chemical transformations.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2014

Alkali-vapor magnetic resonance driven by fictitious radiofrequency fields

We demonstrate an all-optical {sup 133}Cs scalar magnetometer, operating in nonzero magnetic field, in which the magnetic resonance is driven by an effective oscillating magnetic field provided by the AC Stark shift of an intensity-modulated laser beam. We achieve a projected shot-noise-limited sensitivity of 1.7fT/√(Hz) and measure a technical noise floor of 40fT/√(Hz). These results are essentially identical to a coil-driven scalar magnetometer using the same setup. This all-optical scheme offers advantages over traditional coil-driven magnetometers for use in arrays and in magnetically sensitive fundamental physics experiments, e.g., searches for a permanent electric dipole moment of the neutron.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Heliostat Consortium: Gap Analysis on Wind Load for Achieving a Fully Competitive Heliostat Industry

The Heliostat Consortium (HelioCon) Wind Load Subtask was initiated with the aim of bringing research work pertaining to wind load measurement, characterization, and prediction taking place across several tasks, including Advanced Manufacturing, Components and Controls, and Field Deployment. The cross-cutting wind load subtopic in the HelioCon roadmap report [1] highlighted standardized methods and tools that are needed for a more detailed understanding of the static and dynamic loads on a heliostat. This will enable cost reduction of wind-dependent heliostat components to avoid unnecessarily conservative, overly constrained designs and increase field efficiency/reliability, to reduce the risk of component failures due to high-wind events (>15 m/s). Gaps related to heliostat wind load include site characterization for wind measurements, critical load cases for heliostat design, turbulence impacts on heliostat tracking error, testing of heliostat array configurations, understanding spatial variation of maximum loads across the solar field, and heliostat field layout and operating strategies. The recommended highest-priority pathway as first steps taken by HelioCon to address these gaps are to develop site characterization guidelines for heliostat design and field load measurements.

Emes, Matthew (ORCID:0000000341474387)↗
DOE OSTI2026

A tensor train-based isogeometric solver for large-scale 3D poisson problems

We introduce a three-dimensional (3D), fully tensor train (TT) assembled isogeometric analysis (IGA) framework, TT-IGA, for solving partial differential equations (PDEs). Our method reformulates IGA discrete operators into TT format, enabling efficient compression and computation. Geometry evaluations use the original NURBS description at sampling points and TT approximation is applied to geometry-derived coefficient fields and discrete operators. We demonstrate the effectiveness of the proposed TT-IGA framework on the three-dimensional Poisson equation, achieving substantial reductions in memory and computational cost without compromising solution quality.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2017

Nucleon transverse momentum-dependent parton distributions in lattice QCD: Renormalization patterns and discretization effects

Lattice QCD calculations of transverse momentum-dependent parton distribution functions (TMDs) in nucleons are presented in this paper, based on the evaluation of nucleon matrix elements of quark bilocal operators with a staple-shaped gauge connection. Both time-reversal odd effects, namely, the generalized Sivers and Boer-Mulders transverse momentum shifts, as well as time-reversal even effects, namely, the generalized transversity and one of the generalized worm-gear shifts, are studied. Results are obtained on two different n f = 2 + 1 flavor ensembles with approximately matching pion masses but very different discretization schemes: domain-wall fermions (DWF) with lattice spacing a = 0.084 fm and pion mass 297 MeV, and Wilson-clover fermions with a = 0.114 fm and pion mass 317 MeV. Comparison of the results on the two ensembles yields insight into the length scales at which lattice discretization errors are small, and into the extent to which the renormalization pattern obeyed by the continuum QCD TMD operator continues to apply in the lattice formulation. For the studied TMD observables, the results are found to be consistent between the two ensembles at sufficiently large separation of the quark fields within the operator, whereas deviations are observed in the local limit and in the case of a straight link gauge connection, which is relevant to the studies of parton distribution functions. Finally and furthermore, the lattice estimates of the generalized Sivers shift obtained here are confronted with, and are seen to tend towards, a phenomenological estimate extracted from experimental data.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

A High-Field Polarized 3 He Target for Jefferson Lab’s CLAS12 Spectrometer

Polarized 3He nuclear targets are invaluable surrogates for polarized neutron targets in spin-dependent scattering studies of the structure of matter. Traditional polarized 3He targets have seen steady improvements and active use over the last three decades, however they have been limited to operation in low magnetic fields. This has precluded their use in spectrometers that utilize high-magnetic-field tracking systems, such as Jefferson Lab's CLAS12 spectrometer. Developments in high-magnetic-field metastability exchange optical pumping of 3He, recently incorporated into the design of a polarized 3He ion source for RHIC and the EIC, could enable a new, polarized 3He fixed target to operate within high fields. Combining high-field techniques with the double-cell cryogenic target design used for the MIT-Bates 88-02 experiment, polarization and target density comparable to traditional polarized 3He targets could be reached while within a high magnetic field environment. We discuss the conceptual design for such a target, show our progress in this target's development, and outline plans for in-beams tests in Jefferson Lab's Hall B.

Maxwell, James↗
DOE OSTI2019

Quasioptical modeling of wave beams with and without mode conversion. I. Basic theory

This work opens a series of papers where we develop a general quasi-optical theory for mode-converting electromagnetic beams in plasma and implement it in a numerical algorithm. Here, the basic theory is introduced. We consider a general quasimonochromatic multicomponent wave in a weakly inhomogeneous linear medium with no sources. For any given dispersion operator that governs the wave field, we explicitly calculate the approximate operator that governs the wave envelope ψ to the second order in the geometrical-optics parameter. Then, we further simplify this envelope operator by assuming that the gradient of ψ transverse to the local group velocity is much larger than the corresponding parallel gradient. This leads to a parabolic differential equation for ψ (“quasioptical equation”) on the basis of the geometrical-optics polarization vectors. Scalar and mode-converting vector beams are described on the same footing. Here, we also explain how to apply this model to electromagnetic waves in general. In the next papers of this series, we report successful quasioptical modeling of radio frequency wave beams in magnetized plasma based on this theory.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2016

Mod 1 ICS TI Report: ICS Conversion of a 140% HPGe Detector

This report evaluates the Mod 1 ICS, an electrically cooled 140% HPGe detector. It is a custom version of the ORTEC Integrated Cooling System (ICS) modified to make it more practical for us to use in the field. Performance and operating characteristics of the Mod 1 ICS are documented, noting both pros and cons. The Mod 1 ICS is deemed a success. Recommendations for a Mod 2 ICS, a true field prototype, are provided.

42 ENGINEERING↗