Search NASA⌕ Search

SEARCH · Search NASA

Results for “Finite volume method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

Evaluation of 3 numerical methods for propulsion integration studies on transonic transport configurations

An effort has been undertaken at the NASA Langley Research Center to assess the capabilities of available computational methods for use in propulsion integration design studies of transonic transport aircraft, particularly of pylon/nacelle combinations which exhibit essentially no interference drag. The three computer codes selected represent state-of-the-art computational methods for analyzing complex configurations at subsonic and transonic flight conditions. These are: EULER, a finitie volume solution of the Euler equation; VSAERO, a panel solution of the Laplace equation; and PPW, a finite difference solution of the small disturbance transonic equations. In general, all three codes have certain capabilities that allow them to be of some value in predicting the flows about transport configurations, but all have limitations. Until more accurate methods are available, careful application and interpretation of the results of these codes are needed.

Yaros, S. F.↗
NASA NTRSDate not supplied

A Convolutional Neural Network for Multiscale Modeling of Composite Materials

An artificial convolutional neural network was created to efficiently mimic a micromechanics model, the High Fidelity Generalized Method of Cells, for use in multi-scale structural finite element analysis. The network was found to quickly and accurately replicate the stiffness predicted by the micromechanics model using a 2D image of an idealized representative volume element of a fiber/matrix microstructure. The long-term goal of this work is to efficiently apply multi-scale methods for predicting the damage progression of a composite structure.

Composites↗
NASA NTRS1985

Solution method for a hovering helicopter rotor using the Euler equations

A method for the calculation of the flow field of a helicopter rotor blade in hover is presented. The approach uses a finite volume solution of the three dimensional Euler equations for the blade near field. In the Euler solver the velocity field is decomposed into two parts. One is the induced velocity of the vortex wake extending below the blade, found from a free wake calculation procedure. The other part is the unknown additional velocity field of the rotor blade. This approach eliminates numerical diffusion of the rolled up wake vorticity due to truncation error and artificial viscosity. Also, the effects of the far wake are included in the limited computational domain. Solutions are presented for an isolated wing and a model helicopter rotor and compared to experiment.

Roberts, T. W.↗
NASA NTRS1986

Comparison of Euler and full potential marching techniques for flows over complex configurations

Two recently developed aerodynamic prediction techniques based on the steady full potential equation and the unsteady Euler equations have been applied to a variety of three-dimensional supersonic flow problems exhibiting embedded subsonic regions. Both techniques utilize planar Gauss-Seidel relaxation in the marching direction and approximate factorization in the cross-flow plane. A conservative switching scheme and flux bias technique are employed in the full potential method to transition from the supersonic marching procedure to a subsonic relaxation algorithm and vice versa. A new unified approach with finite volume, high accuracy (up to third order) Total Variation Diminishing formulation (based on Roe's scheme) is used in the Euler solver. In the supersonic regions of the flow an 'infinitely large' time step is employed, and a finite time step is applied in the subsonic regions of the flow to reach the steady-state as a time-asymptote. Numerical solutions are obtained for a number of complex configurations, including: (1) an elliptic waverider, (2) a realistic fighter configuration, (3) the Space Shuttle, and (4) a Shuttle-like configuration. Both the Full Potential and Euler numerical results are in good agreement with available experimental data.

Szema, K. Y.↗
NASA NTRS1986

Polynomial elimination theory and non-linear stability analysis for the Euler equations

Numerical methods are presented that exploit the polynomial properties of discretizations of the Euler equations. It is noted that most finite difference or finite volume discretizations of the steady-state Euler equations produce a polynomial system of equations to be solved. These equations are solved using classical polynomial elimination theory, with some innovative modifications. This paper also presents some preliminary results of a new non-linear stability analysis technique. This technique is applicable to determining the stability of polynomial iterative schemes. Results are presented for applying the elimination technique to a one-dimensional test case. For this test case, the exact solution is computed in three iterations. The non-linear stability analysis is applied to determine the optimal time step for solving Burgers' equation using the MacCormack scheme. The estimated optimal time step is very close to the time step that arises from a linear stability analysis.

Kennon, S. R.↗
NASA NTRS2001

Development of an Unstructured Mesh Code for Flows About Complete Vehicles

This report describes the research work undertaken at the Massachusetts Institute of Technology, under NASA Research Grant NAG4-157. The aim of this research is to identify effective algorithms and methodologies for the efficient and routine solution of flow simulations about complete vehicle configurations. For over ten years we have received support from NASA to develop unstructured mesh methods for Computational Fluid Dynamics. As a result of this effort a methodology based on the use of unstructured adapted meshes of tetrahedra and finite volume flow solvers has been developed. A number of gridding algorithms, flow solvers, and adaptive strategies have been proposed. The most successful algorithms developed from the basis of the unstructured mesh system FELISA. The FELISA system has been extensively for the analysis of transonic and hypersonic flows about complete vehicle configurations. The system is highly automatic and allows for the routine aerodynamic analysis of complex configurations starting from CAD data. The code has been parallelized and utilizes efficient solution algorithms. For hypersonic flows, a version of the code which incorporates real gas effects, has been produced. The FELISA system is also a component of the STARS aeroservoelastic system developed at NASA Dryden. One of the latest developments before the start of this grant was to extend the system to include viscous effects. This required the development of viscous generators, capable of generating the anisotropic grids required to represent boundary layers, and viscous flow solvers. We show some sample hypersonic viscous computations using the developed viscous generators and solvers. Although this initial results were encouraging it became apparent that in order to develop a fully functional capability for viscous flows, several advances in solution accuracy, robustness and efficiency were required. In this grant we set out to investigate some novel methodologies that could lead to the required improvements. In particular we focused on two fronts: (1) finite element methods and (2) iterative algebraic multigrid solution techniques.

Peraire, Jaime↗
NASA NTRS1989

The computation of thermo-chemical nonequilibrium hypersonic flows

Several conceptual designs for vehicles that would fly in the atmosphere at hypersonic speeds have been developed recently. For the proposed flight conditions the air in the shock layer that envelops the body is at a sufficiently high temperature to cause chemical reaction, vibrational excitation, and ionization. However, these processes occur at finite rates which, when coupled with large convection speeds, cause the gas to be removed from thermo-chemical equilibrium. This non-ideal behavior affects the aerothermal loading on the vehicle and has ramifications in its design. A numerical method to solve the equations that describe these types of flows in 2-D was developed. The state of the gas is represented with seven chemical species, a separate vibrational temperature for each diatomic species, an electron translational temperature, and a mass-average translational-rotational temperature for the heavy particles. The equations for this gas model are solved numerically in a fully coupled fashion using an implicit finite volume time-marching technique. Gauss-Seidel line-relaxation is used to reduce the cost of the solution and flux-dependent differencing is employed to maintain stability. The numerical method was tested against several experiments. The calculated bow shock wave detachment on a sphere and two cones was compared to those measured in ground testing facilities. The computed peak electron number density on a sphere-cone was compared to that measured in a flight test. In each case the results from the numerical method were in excellent agreement with experiment. The technique was used to predict the aerothermal loads on an Aeroassisted Orbital Transfer Vehicle including radiative heating. These results indicate that the current physical model of high temperature air is appropriate and that the numerical algorithm is capable of treating this class of flows.

Candler, Graham↗
NASA NTRS1995

The multidimensional Self-Adaptive Grid code, SAGE, version 2

This new report on Version 2 of the SAGE code includes all the information in the original publication plus all upgrades and changes to the SAGE code since that time. The two most significant upgrades are the inclusion of a finite-volume option and the ability to adapt and manipulate zonal-matching multiple-grid files. In addition, the original SAGE code has been upgraded to Version 1.1 and includes all options mentioned in this report, with the exception of the multiple grid option and its associated features. Since Version 2 is a larger and more complex code, it is suggested (but not required) that Version 1.1 be used for single-grid applications. This document contains all the information required to run both versions of SAGE. The formulation of the adaption method is described in the first section of this document. The second section is presented in the form of a user guide that explains the input and execution of the code. The third section provides many examples. Successful application of the SAGE code in both two and three dimensions for the solution of various flow problems has proven the code to be robust, portable, and simple to use. Although the basic formulation follows the method of Nakahashi and Deiwert, many modifications have been made to facilitate the use of the self-adaptive grid method for complex grid structures. Modifications to the method and the simple but extensive input options make this a flexible and user-friendly code. The SAGE code can accommodate two-dimensional and three-dimensional, finite-difference and finite-volume, single grid, and zonal-matching multiple grid flow problems.

Davies, Carol B.↗
NASA NTRS1992

The present state and future directions of PDF methods

The objectives of the workshop are presented in viewgraph format, as is this entire article. The objectives are to discuss the present status and the future direction of various levels of engineering turbulence modeling related to Computational Fluid Dynamics (CFD) computations for propulsion; to assure that combustion is an essential part of propulsion; and to discuss Probability Density Function (PDF) methods for turbulent combustion. Essential to the integration of turbulent combustion models is the development of turbulent model, chemical kinetics, and numerical method. Some turbulent combustion models typically used in industry are the k-epsilon turbulent model, the equilibrium/mixing limited combustion, and the finite volume codes.

Pope, S. B.↗
NASA NTRS1993

Micromechanics of crenulated fibers in carbon/carbon composites

The influence of crenulated noncircular fibers on the micromechanical stress states due to a transverse strain and to a temperature change in carbon/carbon composites is examined using the finite element method. Stresses at the interface of both fully bonded and fully disbonded fibers having two crenulation amplitudes and with two fiber volume fractions are presented. In each case, these interface stresses are compared to stresses at the interface of circular fibers which have the same degree of disbond and fiber volume fraction and are under the same loading conditions. For the disbonded cases, deformed meshes showing locations of fiber/matrix contact are also included. In addition to the interface stress states, selected composite properties are also computed and compared in each case examined. Interest in studying noncircular fibers stems from a desire to increase the transverse properties of carbon/carbon by introducing a mechanical interlocking between the fiber and the matrix. Results presented here indicate that this interlocking does in fact occur. Evidence from the interface stress data suggests, however, that any possible advantage of this interlocking may be outweighed by the disadvantage of stress concentrations which arise at the interface due to the crenulated geometry of the fibers.

Carapella, E. E.↗
NASA NTRS1993

Analysis of microstrip dipoles and slots transversely coupled to a microstrip line using the FDTD method

Printed dipole elements and their complement, linear slots, are elementary radiators that have found use in low-profile antenna arrays. Low-profile antenna arrays, in addition to their small size and low weight characteristics, offer the potential advantage of low-cost, high-volume production with easy integration with active integrated circuit components. The design of such arrays requires that the radiation and impedance characteristics of the radiating elements be known. The FDTD (Finite-Difference Time-Domain) method is a general, straight-forward implementation of Maxwell's equations and offers a relatively simple way of analyzing both printed dipole and slot elements. Investigated in this work is the application of the FDTD method to the analysis of printed dipole and slot elements transversely coupled to an infinite transmission line in a multilayered configuration. Such dipole and slot elements may be used in dipole and slot series-fed-type linear arrays, where element offsets and interelement line lengths are used to obtain the desired amplitude distribution and beam direction, respectively. The design of such arrays is achieved using transmission line theory with equivalent circuit models for the radiating elements. In an equivalent circuit model, the dipole represents a shunt impedance to the transmission line, where the impedance is a function of dipole offset, length, and width. Similarly, the slot represents a series impedance to the transmission line. The FDTD method is applied to single dipole and slot elements transversely coupled to an infinite microstrip line using a fixed rectangular grid with Mur's second order absorbing boundary conditions. Frequency-dependent circuit and scattering parameters are obtained by saving desired time-domain quantities and using the Fourier transform. A Gaussian pulse excitation is applied to the microstrip transmission line, where the resulting reflected signal due to the presence of the radiating element is used to determine the equivalent element impedance.

Tulintseff, A. N.↗
DOE OSTI2026

thornado+FLASH-X: A Hybrid Discontinuous Galerkin–Implicit-explicit and Finite-volume Framework for Neutrino-radiation Hydrodynamics in Core-collapse Supernovae

We present neutrino-transport algorithms implemented in the toolkit for high-order neutrino-radiation hydrodynamics (thornado) and their coupling to self-gravitating hydrodynamics within the adaptive mesh refinement–based multiphysics simulation framework FLASH-X. thornado, developed primarily for simulations of core-collapse supernovae (CCSNe), employs a spectral, six-species two-moment formulation with algebraic closure and special-relativistic observer corrections accurate to $\mathcal{O}(v/c)$, and uses discontinuous Galerkin (DG) methods for phase-space discretization combined with implicit-explicit time stepping. A key development is a nonlinear neutrino–matter coupling algorithm based on nested fixed-point iteration with Anderson acceleration, enabling fully implicit treatment of collisional processes, including energy-coupling interactions such as neutrino–electron scattering and pair production. Coupling to finite-volume (FV) hydrodynamics is achieved through a hybrid DG-FV representation of the fluid variables and operator-split evolution within FLASH-X. The implementation is verified using basic transport tests with idealized opacities and relaxation and deleptonization problems with tabulated microphysics. Spherically symmetric CCSN simulations demonstrate accuracy and robustness of the coupled scheme, including close agreement with the CCSN simulation code Chimera. An axisymmetric CCSN simulation further demonstrates the viability of DG-based neutrino transport for multidimensional supernova modeling within FLASH-X. thornado’s neutrino-transport solver is GPU-enabled using OpenMP offloading or OpenACC, and all CCSN applications included in this work use the GPU implementation. Together, these results establish a foundation for future enhancements in physics fidelity, numerical algorithms, and computational performance, for increasingly realistic large-scale CCSN simulations.

Endeve, Eirik [Oak Ridge National Laboratory (ORNL↗
NASA NTRS1989

Calculation of turbulence-driven secondary motion in ducts with arbitrary cross section

Calculation methods for turbulent duct flows are generalized for ducts with arbitrary cross-sections. The irregular physical geometry is transformed into a regular one in computational space, and the flow equations are solved with a finite-volume numerical procedure. The turbulent stresses are calculated with an algebraic stress model derived by simplifying model transport equations for the individual Reynolds stresses. Two variants of such a model are considered. These procedures enable the prediction of both the turbulence-driven secondary flow and the anisotropy of the Reynolds stresses, in contrast to some of the earlier calculation methods. Model predictions are compared to experimental data for developed flow in triangular duct, trapezoidal duct and a rod-bundle geometry. The correct trends are predicted, and the quantitative agreement is mostly fair. The simpler variant of the algebraic stress model procured better agreement with the measured data.

Demuren, A. O.↗
NASA NTRS1990

Calculation of turbulence-driven secondary motion in ducts with arbitrary cross-section

Calculation methods for turbulent duct flows are generalized for ducts with arbitrary cross-sections. The irregular physical geometry is transformed into a regular one in computational space, and the flow equations are solved with a finite-volume numerical procedure. The turbulent stresses are calculated with an algebraic stress model derived by simplifying model transport equations for the individual Reynolds stresses. Two variants of such a model are considered. These procedures enable the prediction of both the turbulence-driven secondary flow and the anisotropy of the Reynolds stresses, in contrast to some of the earlier calculation methods. Model predictions are compared to experimental data for developed flow in triangular duct, trapezoidal duct and a rod-bundle geometry. The correct trends are predicted, and the quantitative agreement is mostly fair. The simpler variant of the algebraic stress model procured better agreement with the measured data.

Demuren, A. O.↗
NASA NTRS1985

Euler calculations for multielement airfoils using Cartesian grids

A finite volume formulation for the Euler equations using Cartesian grids is presented and used to study complex two-dimensional configurations. The formulation extends methods developed for the potential equation to the Euler equations. Results using this approach for single element airfoils are shown to be competitive with and as accurate as other methods that employ mapped grids. Further, it is demonstrated that this method provides a simple and accurate procedure for solving flow problems involving multielement airfoils.

Clarke, D. K.↗
NASA NTRS1995

User's manual for CBS3DS, version 1.0

CBS3DS is a computer code written in FORTRAN 77 to compute the backscattering radar cross section of cavity backed apertures in infinite ground plane and slots in thick infinite ground plane. CBS3DS implements the hybrid Finite Element Method (FEM) and Method of Moments (MoM) techniques. This code uses the tetrahedral elements, with vector edge basis functions for FEM in the volume of the cavity/slot and the triangular elements with the basis functions for MoM at the apertures. By virtue of FEM, this code can handle any arbitrarily shaped three-dimensional cavities filled with inhomogeneous lossy materials; due to MoM, the apertures can be of any arbitrary shape. The User's Manual is written to make the user acquainted with the operation of the code. The user is assumed to be familiar with the FORTRAN 77 language and the operating environment of the computer the code is intended to run.

Reddy, C. J.↗
NASA NTRS1997

User's Manual for FEMOM3DS

FEMOM3DS is a computer code written in FORTRAN 77 to compute electromagnetic(EM) scattering characteristics of a three dimensional object with complex materials using combined Finite Element Method (FEM)/Method of Moments (MoM) technique. This code uses the tetrahedral elements, with vector edge basis functions for FEM in the volume of the cavity and the triangular elements with the basis functions similar to that described for MoM at the outer boundary. By virtue of FEM, this code can handle any arbitrarily shaped three-dimensional cavities filled with inhomogeneous lossy materials. The User's Manual is written to make the user acquainted with the operation of the code. The user is assumed to be familiar with the FORTRAN 77 language and the operating environment of the computers on which the code is intended to run.

Reddy, C.J.↗
NASA NTRS2000

Resin Film Infusion (RFI) Process Modeling for Large Transport Aircraft Wing Structures

This investigation completed the verification of a three-dimensional resin transfer molding/resin film infusion (RTM/RFI) process simulation model. The model incorporates resin flow through an anisotropic carbon fiber preform, cure kinetics of the resin, and heat transfer within the preform/tool assembly. The computer model can predict the flow front location, resin pressure distribution, and thermal profiles in the modeled part. The formulation for the flow model is given using the finite element/control volume (FE/CV) technique based on Darcy's Law of creeping flow through a porous media. The FE/CV technique is a numerically efficient method for finding the flow front location and the fluid pressure. The heat transfer model is based on the three-dimensional, transient heat conduction equation, including heat generation. Boundary conditions include specified temperature and convection. The code was designed with a modular approach so the flow and/or the thermal module may be turned on or off as desired. Both models are solved sequentially in a quasi-steady state fashion. A mesh refinement study was completed on a one-element thick model to determine the recommended size of elements that would result in a converged model for a typical RFI analysis. Guidelines are established for checking the convergence of a model, and the recommended element sizes are listed. Several experiments were conducted and computer simulations of the experiments were run to verify the simulation model. Isothermal, non-reacting flow in a T-stiffened section was simulated to verify the flow module. Predicted infiltration times were within 12-20% of measured times. The predicted pressures were approximately 50% of the measured pressures. A study was performed to attempt to explain the difference in pressures. Non-isothermal experiments with a reactive resin were modeled to verify the thermal module and the resin model. Two panels were manufactured using the RFI process. One was a stepped panel and the other was a panel with two 'T' stiffeners. The difference between the predicted infiltration times and the experimental times was 4% to 23%.

Loos, Alfred C.↗