Search NASA⌕ Search

SEARCH · Search NASA

Results for “GARNETS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

Recent results of the laser ion source facility at INFN-LNS and applications to nuclear and applied research

A pulsed neodymium-doped yttrium aluminum garnet laser ion source has been used as proton beams generator. The laser wavelength is 1064 nm, the pulse duration is 9 ns and the intensity reaches 10{sup 10} W/cm{sup 2}. Laser irradiates hydrogenated polymers targets located in a chamber at 10{sup -7} mbar. The ions are post-accelerated in a suitable chamber by 30 kV of voltage between the target, positively biased, and the following ground electrode. The extracted beams is characterized through a time-of-flight technique. Possible applications to the field of nuclear physics, such as nuclear excitation and de-excitations, nuclear reactions and nuclear fusion, will be presented and discussed.

43 PARTICLE ACCELERATORS↗

A laser-Compton scattering prototype experiment at 100 MeV linac of Shanghai Institute of Applied Physics

As a prototype of the Shanghai Laser Electron Gamma Source in the Shanghai Synchrotron Radiation Facility, an x-ray source based on laser-Compton scattering (LCS) has been installed at the terminal of the 100 MeV linac of the Shanghai Institute of Applied Physics. LCS x-rays are generated by interactions between Q-switched Nd:yttrium aluminum garnet laser pulses [with wavelength of 1064 nm and pulse width of 21 ns (full width at half maximum)] and electron bunches [with energy of 108 MeV and pulse width of 0.95 ns (rms)] at an angle of 42 deg. between laser and electron beam. In order to measure the energy spectrum of LCS x-rays, a Si(Li) detector along the electron beam line axis is positioned at 9.8 m away from a LCS chamber. After background subtraction, the LCS x-ray spectrum with the peak energy of 29.1{+-}4.4|{sub stat}{+-}2.1|{sub syst} keV and the peak width (rms) of 7.8{+-}2.8|{sub stat}{+-}0.4|{sub syst} keV is observed. Normally the 100 MeV linac operates with the electron macropulse charge of 1.0 nC/pulse, and the electron and laser collision repetition rate of 20 Hz. Therefore, the total LCS x-ray flux of (5.2{+-}2.0)x10{sup 2} Hz can be achieved.

43 PARTICLE ACCELERATORS↗

Laser plasma in a magnetic field

Laser ion source (LIS) is a candidate among various heavy ion sources. A high density plasma produced by Nd:yttrium aluminum garnet laser with drift velocity realizes high current and high charge state ion beams. In order to obtain higher beam current, we made experiments using the LIS with a magnetic field by which a confinement effect can make higher beam current. We measured total current by Faraday cup and analyzed charge distribution by electrostatic ion analyzer. It is shown that the ion beam charge state is higher by a permanent magnet.

43 PARTICLE ACCELERATORS↗

Nearly Complete Isobar Suppression by Photodetachment

The efficiency of selective suppression of negative ions by photodetachment in a gas-filled radio frequency quadrupole ion cooler was investigated with a new detection method. A neodymium doped yttrium aluminum garnet laser beam at 1064 nm was used to remove Co ions in the radio frequency quadrupole cooler and the remaining ions were then probed by photodetachment and neutral particle detection. More than 99.99% suppression of the Co ions was observed. Under identical conditions, only 20% of a Ni beam was suppressed. The results demonstrate that this isobar suppression technique can lead to nearly complete elimination of certain isobaric contaminants in negative ion beams, opening up new experimental possibilities in nuclear and atomic research and accelerator mass spectrometry.

43 PARTICLE ACCELERATORS↗

Laser wavelength effects on ionic and atomic emission from tin plasmas

We investigated the effects of laser wavelength on atomic and ionic emission from Sn plasmas. Plasmas were produced using planar Sn targets excited with 10.6 mum carbon dioxide (CO{sub 2}) and 1.06 mum neodymium-doped yttrium aluminum garnet (Nd:YAG) lasers. Two-dimensional spectral imaging of visible emission showed that continuum emission was significantly more intense in the CO{sub 2} laser produced plasma (LPP) whereas line emission was considerably more extensive in the Nd:YAG LPP. Faraday cup analysis showed that ion profiles were narrower with CO{sub 2} LPPs although they possessed higher kinetic energies.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Initial operation of a pulse-burst laser system for high-repetition-rate Thomson scattering

A pulse-burst laser has been installed for Thomson scattering measurements on the Madison Symmetric Torus reversed-field pinch. The laser design is a master-oscillator power-amplifier. The master oscillator is a commercial Nd:YVO{sub 4} laser (1064 nm) which is capable of Q-switching at frequencies between 5 and 250 kHz. Four Nd:YAG (yttrium aluminum garnet) amplifier stages are in place to amplify the Nd:YVO{sub 4} emission. Single pulses through the Nd:YAG amplifier stages gives energies up to 1.5 J and the gain for each stage has been measured. Repetitive pulsing at 10 kHz has also been performed for 2 ms bursts, giving average pulse energies of 0.53 J with {Delta}E/E of 4.6%, where {Delta}E is the standard deviation between pulses. The next step will be to add one of two Nd:glass (silicate) amplifier stages to produce final pulse energies of 1-2 J for bursts up to 250 kHz.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Pulse-burst laser systems for fast Thomson scattering (invited)

Two standard commercial flashlamp-pumped Nd:YAG (YAG denotes yttrium aluminum garnet) lasers have been upgraded to ''pulse-burst'' capability. Each laser produces a burst of up to 15 2 J Q-switched pulses (1064 nm) at repetition rates of 1-12.5 kHz. Variable pulse-width drive (0.15-0.39 ms) of the flashlamps is accomplished by insulated gate bipolar transistor (IGBT) switching of electrolytic capacitor banks. Direct control of the laser Pockels cell drive enables optimal pulse energy extraction, and up to four 2 J laser pulses during one flashlamp pulse. These lasers are used in the Thomson scattering plasma diagnostic system on the MST reversed-field pinch to record the dynamic evolution of the electron temperature profile and temperature fluctuations. To further these investigations, a custom pulse-burst laser system with a maximum pulse repetition rate of 250 kHz is now being commissioned.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Two color multichannel heterodyne interferometer set up for high spatial resolution electron density profile measurements in TJ-II

A high spatial resolution two color [CO{sub 2}, {lambda}=10.6 {mu}m/Nd:YAG (Nd:YAG denotes neodymium-doped yttrium aluminum garnet), and {lambda}=1.064 {mu}m] expanded-beam multichannel heterodyne interferometer has been installed on the TJ-II stellarator. Careful design of the optical system has allowed complete control on the evolution of both Gaussian beams along the interferometer, as well as the evaluation and optimization of the spatial resolution to be expected in the measurements. Five CO{sub 2} (measurement) channels and three Nd:YAG (vibration compensation) channels have been used to illuminate the plasma with a probe beam of 100 mm size. An optimum interpolation method has been applied to recover both interferometric phasefronts prior to mechanical vibration subtraction. The first results of the installed diagnostic are presented in this paper.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Single-shot electron bunch length measurements using a spatial electro-optical autocorrelation interferometer

A spatial, electro-optical autocorrelation (EOA) interferometer using the vertically polarized lobes of coherent transition radiation (CTR) has been developed as a single-shot electron bunch length monitor at an optical beam port downstream the 100 MeV preinjector LINAC of the Swiss Light Source. This EOA monitor combines the advantages of step-scan interferometers (high temporal resolution) [D. Mihalcea et al., Phys. Rev. ST Accel. Beams 9, 082801 (2006) and T. Takahashi and K. Takami, Infrared Phys. Technol. 51, 363 (2008)] and terahertz-gating technologies [U. Schmidhammer et al., Appl. Phys. B: Lasers Opt. 94, 95 (2009) and B. Steffen et al., Phys. Rev. ST Accel. Beams 12, 032802 (2009)] (fast response), providing the possibility to tune the accelerator with an online bunch length diagnostics. While a proof of principle of the spatial interferometer was achieved by step-scan measurements with far-infrared detectors, the single-shot capability of the monitor has been demonstrated by electro-optical correlation of the spatial CTR interference pattern with fairly long (500 ps) neodymium-doped yttrium aluminum garnet (Nd:YAG) laser pulses in a ZnTe crystal. In single-shot operation, variations of the bunch length between 1.5 and 4 ps due to different phase settings of the LINAC bunching cavities have been measured with subpicosecond time resolution.

36 MATERIALS SCIENCE↗

Improvements of data quality of the LHD Thomson scattering diagnostics in high-temperature plasma experiments

In Large Helical Device (LHD) experiments, an electron temperature (T{sub e}) more than 15 keV has been observed by the yttrium-aluminum-garnet (YAG) laser Thomson scattering diagnostic. Since the LHD Thomson scattering system has been optimized for the temperature region, 50 eV{<=}T{sub e}{<=}10 keV, the data quality becomes worse in the higher T{sub e} region exceeding 10 keV. In order to accurately determine T{sub e} in the LHD high-T{sub e} experiments, we tried to increase the laser pulse energy by simultaneously firing three lasers. The technique enables us to decrease the uncertainties in the measured T{sub e}. Another signal accumulation method was also tested. In addition, we estimated the influence of high-energy electrons on T{sub e} obtained by the LHD Thomson scattering system.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Development of high field SQUID magnetometer for magnetization studies up to 7 T and temperatures in the range from 4.2 to 300 K

We present the design, fabrication, integration, testing, and calibration of a high field superconducting quantum interference device (SQUID) magnetometer. The system is based on dc SQUID sensor with flux locked loop readout electronics. The design is modular and all the subsystems have been fabricated in the form of separate modules in order to simplify the assembly and for ease of maintenance. A novel feature of the system is that the current induced in the pickup loop is distributed as inputs to two different SQUID sensors with different strengths of coupling in order to improve the dynamic range of the system. The SQUID magnetometer has been calibrated with yttrium iron garnet (YIG) sphere as a standard reference material. The calibration factor was determined by fitting the measured flux profile of the YIG sphere to that expected for a point dipole. Gd{sub 2}O{sub 3} was also used as another reference material for the calibration and the effective magnetic moment of the Gd{sup 3+} could be evaluated from the temperature dependent magnetization measurements. The sensitivity of the system has been estimated to be about 10{sup -7} emu at low magnetic fields and about 10{sup -5} emu at high magnetic fields {approx}7 T.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Focused ion beam and electron microscopy characterization of nanosharp tips and microbumps on silicon and metal thin films formed via localized single-pulse laser irradiation

Cross-sections of laser fabricated nanosharp tips and microbumps on silicon and metal thin films are produced and examined in this work. These structures are formed with a Q-switched neodymium doped yttrium aluminum garnet nanosecond-pulse laser, emitting at its fourth harmonic of 266 nm, using a mask projection technique to generate circular laser spots, several microns in diameter. Cross-section of selected structures were produced using a focused ion beam and were characterized via electron microscopy. The diffraction patterns of the silicon samples indicate that the laser formed tip maintains the same single crystal structure as the original silicon film. Examinations of the laser formed structures in metal films confirm that the microbumps are hollow, while revealing that the vertical protrusions are solid.

36 MATERIALS SCIENCE↗

An explanation for laser-induced spallation effect in a-C:H films: Altered phase evolution route caused by hydrogen doping

The laser-induced spalling effect has been recognized as a unique phenomenon for amorphous carbon (a-C) films during laser processing. In this work, the origin of spalling effect was investigated by ablating two different types of a-C film: hydrogenated a-C (a-C:H) and nonhydrogenated a-C with an Nd-yttrium aluminum garnet laser system. Comparisons of ablating results demonstrated that the spalling effect only occurred in a-C:H rather than nonhydrogenated a-C. Laser heating simulation indicated that the temperature distributions in both films after laser pulse are similar with a high temperature gradient in depth direction. Annealing test results, Raman spectra and nanoindentation show that with the increase in annealing temperature, a-C film transforms into grassy carbon directly, while a-C:H experiences two subprocess under heating: the hydrogen mobilization and rearrangement of C-C network at a relatively low temperature range resulting in a denser C-C network and raised film density; the graphitization at high temperature which would lower the film density. We propose that the reason of laser-induced spalling effect in a-C:H might depend on two aspects: (1) the heat source like laser pulse which could produce a high temperature gradient in depth direction within ultrashort time and (2) the unique evolution process of film microstructure under heating. Based on above model, the spalling effect is ascribed to the concentrated stress caused by different structure evolution subprocess at different depth in a-C:H during the laser irradiation. It is remarkable that the conclusions deduced from our model are proven to be in good agreement with our experimental results and the previous articles reported by others.

36 MATERIALS SCIENCE↗

The effect of excitation wavelength on dynamics of laser-produced tin plasma

We investigated the effect of the excitation wavelength on the density evolution of laser-produced tin plasmas, both experimentally and numerically. For producing plasmas, Sn targets were excited with either 10.6 {mu}m CO{sub 2} laser or 1.06 {mu}m Nd:yttrium aluminum garnet laser; both are considered to be potential excitation lasers for extreme ultraviolet lithography laser-produced plasma light sources. The electron density of the plasma during the isothermal expansion regime was estimated using an interferometric technique. The Stark broadening of isolated singly-ionized emission was employed for deducing the density during the plasma adiabatic expansion regime. Our results indicate that the excitation source wavelength determines the initial density of the plasma, as well the plume expansion dynamics. Numerical simulation using HEIGHTS simulation package agrees well with the experimentally measured density profile.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Ruby and Sm:YAG fluorescence pressure gauges up to 120 GPa and 700 K

Diamond anvil cell (DAC) technique relies on pressure determination based on use of pressure gauges. Fluorescence-based gauges, such as ruby and Sm doped yttrium aluminum garnet (Sm:YAG), are frequently used in the high pressure research. Here we present the results of DAC experiments which allowed extending calibration curves of the fluorescence frequency versus pressure up to 120 GPa at high temperatures up to 700 K for both for ruby and Sm:YAG. Cubic boron nitride was used as the reference gauge.

36 MATERIALS SCIENCE↗

Unidirectional anisotropy in the spin pumping voltage in yttrium iron garnet/platinum bilayers

Detailed measurements of the dc voltage generated in a thin Pt layer deposited on films of yttrium iron garnet (YIG) have been carried out to study the spin pumping effect produced by magnetostatic (MS) modes excited by a microwave field. In relatively thick YIG films the modes are far apart so that one can identify clearly the spin pumping voltage in V{sub SP} produced by each MS mode. We have discovered that when the sputter deposition of the thin Pt layer is made on the YIG film magnetized by a static magnetic field, V{sub SP} exhibits a strong unidirectional anisotropy.

36 MATERIALS SCIENCE↗

Enhanced spin pumping at yttrium iron garnet/Au interfaces

Spin injection across the ferrimagnetic insulator yttrium iron garnet (YIG)/normal metal Au interface was studied using ferromagnetic resonance. The spin mixing conductance was determined by comparing the Gilbert damping parameter {alpha} in YIG/Au and YIG/Au/Fe heterostructures. The main purpose of this study was to correlate the spin pumping efficiency with chemical modifications of the YIG film surface using in situ etching and deposition techniques. By means of Ar{sup +} ion beam etching, one is able to increase the spin mixing conductance at the YIG/Au interface by a factor of 5 compared to the untreated YIG/Au interface.

36 MATERIALS SCIENCE↗

Effect of oxygen pressure on structural and magnetic properties of YIG thin films

The effect of oxygen pressure (P{sub O2}) on the Yttrium Iron Garnet (YIG) thin films were grown on silicon substrate by rf sputtering method was studied. The as-deposited films at 300K were amorphous in nature. The crystallization of these films was achieved by annealing at a temperature of 800 deg. C/1hr in air. The structural, microstructural and magnetic properties were found to be dependent on P{sub O2}.

36 MATERIALS SCIENCE↗